| /* This should be done by Eric |
| 2004.12 yhlu add dual core support |
| 2005.01 yhlu add support move apic before pci_domain in MB Config.lb |
| 2005.02 yhlu add e0 memory hole support |
| 2005.11 yhlu add put sb ht chain on bus 0 |
| */ |
| |
| #include <console/console.h> |
| #include <arch/io.h> |
| #include <stdint.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <device/hypertransport.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <bitops.h> |
| #include <cpu/cpu.h> |
| |
| #include <cpu/x86/lapic.h> |
| |
| #include <cpu/amd/dualcore.h> |
| #if CONFIG_LOGICAL_CPUS==1 |
| #include <pc80/mc146818rtc.h> |
| #endif |
| |
| #include "chip.h" |
| #include "root_complex/chip.h" |
| #include "northbridge.h" |
| |
| #include "amdk8.h" |
| |
| #include <cpu/amd/model_fxx_rev.h> |
| |
| #include <cpu/amd/amdk8_sysconf.h> |
| |
| struct amdk8_sysconf_t sysconf; |
| |
| #define MAX_FX_DEVS 8 |
| static device_t __f0_dev[MAX_FX_DEVS]; |
| static device_t __f1_dev[MAX_FX_DEVS]; |
| static unsigned fx_devs=0; |
| |
| static void get_fx_devs(void) |
| { |
| int i; |
| for(i = 0; i < MAX_FX_DEVS; i++) { |
| __f0_dev[i] = dev_find_slot(0, PCI_DEVFN(0x18 + i, 0)); |
| __f1_dev[i] = dev_find_slot(0, PCI_DEVFN(0x18 + i, 1)); |
| if (__f0_dev[i] != NULL && __f1_dev[i] != NULL) |
| fx_devs = i+1; |
| } |
| if (__f1_dev[0] == NULL || __f0_dev[0] == NULL || fx_devs == 0) { |
| die("Cannot find 0:0x18.[0|1]\n"); |
| } |
| } |
| |
| static uint32_t f1_read_config32(unsigned reg) |
| { |
| if ( fx_devs == 0) |
| get_fx_devs(); |
| return pci_read_config32(__f1_dev[0], reg); |
| } |
| |
| static void f1_write_config32(unsigned reg, uint32_t value) |
| { |
| int i; |
| if ( fx_devs == 0) |
| get_fx_devs(); |
| for(i = 0; i < fx_devs; i++) { |
| device_t dev; |
| dev = __f1_dev[i]; |
| if (dev && dev->enabled) { |
| pci_write_config32(dev, reg, value); |
| } |
| } |
| } |
| |
| static unsigned int amdk8_nodeid(device_t dev) |
| { |
| return (dev->path.pci.devfn >> 3) - 0x18; |
| } |
| |
| static unsigned int amdk8_scan_chain(device_t dev, unsigned nodeid, unsigned link, unsigned sblink, unsigned int max, unsigned offset_unitid) |
| { |
| |
| uint32_t link_type; |
| int i; |
| uint32_t busses, config_busses; |
| unsigned free_reg, config_reg; |
| unsigned ht_unitid_base[4]; // here assume only 4 HT device on chain |
| unsigned max_bus; |
| unsigned min_bus; |
| unsigned max_devfn; |
| |
| dev->link[link].cap = 0x80 + (link *0x20); |
| do { |
| link_type = pci_read_config32(dev, dev->link[link].cap + 0x18); |
| } while(link_type & ConnectionPending); |
| if (!(link_type & LinkConnected)) { |
| return max; |
| } |
| do { |
| link_type = pci_read_config32(dev, dev->link[link].cap + 0x18); |
| } while(!(link_type & InitComplete)); |
| if (!(link_type & NonCoherent)) { |
| return max; |
| } |
| /* See if there is an available configuration space mapping |
| * register in function 1. |
| */ |
| free_reg = 0; |
| for(config_reg = 0xe0; config_reg <= 0xec; config_reg += 4) { |
| uint32_t config; |
| config = f1_read_config32(config_reg); |
| if (!free_reg && ((config & 3) == 0)) { |
| free_reg = config_reg; |
| continue; |
| } |
| if (((config & 3) == 3) && |
| (((config >> 4) & 7) == nodeid) && |
| (((config >> 8) & 3) == link)) { |
| break; |
| } |
| } |
| if (free_reg && (config_reg > 0xec)) { |
| config_reg = free_reg; |
| } |
| /* If we can't find an available configuration space mapping |
| * register skip this bus |
| */ |
| if (config_reg > 0xec) { |
| return max; |
| } |
| |
| /* Set up the primary, secondary and subordinate bus numbers. |
| * We have no idea how many busses are behind this bridge yet, |
| * so we set the subordinate bus number to 0xff for the moment. |
| */ |
| #if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0 |
| // first chain will on bus 0 |
| if((nodeid == 0) && (sblink==link)) { // actually max is 0 here |
| min_bus = max; |
| } |
| #if CONFIG_SB_HT_CHAIN_ON_BUS0 > 1 |
| // second chain will be on 0x40, third 0x80, forth 0xc0 |
| else { |
| min_bus = ((max>>6) + 1) * 0x40; |
| } |
| max = min_bus; |
| #else |
| //other ... |
| else { |
| min_bus = ++max; |
| } |
| #endif |
| #else |
| min_bus = ++max; |
| #endif |
| max_bus = 0xff; |
| |
| dev->link[link].secondary = min_bus; |
| dev->link[link].subordinate = max_bus; |
| |
| /* Read the existing primary/secondary/subordinate bus |
| * number configuration. |
| */ |
| busses = pci_read_config32(dev, dev->link[link].cap + 0x14); |
| config_busses = f1_read_config32(config_reg); |
| |
| /* Configure the bus numbers for this bridge: the configuration |
| * transactions will not be propagates by the bridge if it is |
| * not correctly configured |
| */ |
| busses &= 0xff000000; |
| busses |= (((unsigned int)(dev->bus->secondary) << 0) | |
| ((unsigned int)(dev->link[link].secondary) << 8) | |
| ((unsigned int)(dev->link[link].subordinate) << 16)); |
| pci_write_config32(dev, dev->link[link].cap + 0x14, busses); |
| |
| config_busses &= 0x000fc88; |
| config_busses |= |
| (3 << 0) | /* rw enable, no device compare */ |
| (( nodeid & 7) << 4) | |
| (( link & 3 ) << 8) | |
| ((dev->link[link].secondary) << 16) | |
| ((dev->link[link].subordinate) << 24); |
| f1_write_config32(config_reg, config_busses); |
| |
| /* Now we can scan all of the subordinate busses i.e. the |
| * chain on the hypertranport link |
| */ |
| for(i=0;i<4;i++) { |
| ht_unitid_base[i] = 0x20; |
| } |
| |
| if (min_bus == 0) |
| max_devfn = (0x17<<3) | 7; |
| else |
| max_devfn = (0x1f<<3) | 7; |
| |
| max = hypertransport_scan_chain(&dev->link[link], 0, max_devfn, max, ht_unitid_base, offset_unitid); |
| |
| /* We know the number of busses behind this bridge. Set the |
| * subordinate bus number to it's real value |
| */ |
| dev->link[link].subordinate = max; |
| busses = (busses & 0xff00ffff) | |
| ((unsigned int) (dev->link[link].subordinate) << 16); |
| pci_write_config32(dev, dev->link[link].cap + 0x14, busses); |
| |
| config_busses = (config_busses & 0x00ffffff) | |
| (dev->link[link].subordinate << 24); |
| f1_write_config32(config_reg, config_busses); |
| |
| { |
| // config config_reg, and ht_unitid_base to update hcdn_reg; |
| int index; |
| unsigned temp = 0; |
| index = (config_reg-0xe0) >> 2; |
| for(i=0;i<4;i++) { |
| temp |= (ht_unitid_base[i] & 0xff) << (i*8); |
| } |
| |
| sysconf.hcdn_reg[index] = temp; |
| |
| } |
| |
| return max; |
| } |
| |
| static unsigned int amdk8_scan_chains(device_t dev, unsigned int max) |
| { |
| unsigned nodeid; |
| unsigned link; |
| unsigned sblink = 0; |
| unsigned offset_unitid = 0; |
| nodeid = amdk8_nodeid(dev); |
| |
| if(nodeid==0) { |
| sblink = (pci_read_config32(dev, 0x64)>>8) & 3; |
| #if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0 |
| #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) |
| offset_unitid = 1; |
| #endif |
| max = amdk8_scan_chain(dev, nodeid, sblink, sblink, max, offset_unitid ); // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0 |
| #endif |
| } |
| |
| for(link = 0; link < dev->links; link++) { |
| #if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0 |
| if( (nodeid == 0) && (sblink == link) ) continue; //already done |
| #endif |
| offset_unitid = 0; |
| #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) |
| #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 |
| if((nodeid == 0) && (sblink == link)) |
| #endif |
| offset_unitid = 1; |
| #endif |
| |
| max = amdk8_scan_chain(dev, nodeid, link, sblink, max, offset_unitid); |
| } |
| |
| return max; |
| } |
| |
| |
| static int reg_useable(unsigned reg, |
| device_t goal_dev, unsigned goal_nodeid, unsigned goal_link) |
| { |
| struct resource *res; |
| unsigned nodeid, link=0; |
| int result; |
| res = 0; |
| for(nodeid = 0; !res && (nodeid < fx_devs); nodeid++) { |
| device_t dev; |
| dev = __f0_dev[nodeid]; |
| if (!dev) |
| continue; |
| for(link = 0; !res && (link < 3); link++) { |
| res = probe_resource(dev, IOINDEX(0x100 + reg, link)); |
| } |
| } |
| result = 2; |
| if (res) { |
| result = 0; |
| if ( (goal_link == (link - 1)) && |
| (goal_nodeid == (nodeid - 1)) && |
| (res->flags <= 1)) { |
| result = 1; |
| } |
| } |
| |
| return result; |
| } |
| |
| static unsigned amdk8_find_reg(device_t dev, unsigned nodeid, unsigned link, |
| unsigned min, unsigned max) |
| { |
| unsigned resource; |
| unsigned free_reg, reg; |
| resource = 0; |
| free_reg = 0; |
| for(reg = min; reg <= max; reg += 0x8) { |
| int result; |
| result = reg_useable(reg, dev, nodeid, link); |
| if (result == 1) { |
| /* I have been allocated this one */ |
| break; |
| } |
| else if (result > 1) { |
| /* I have a free register pair */ |
| free_reg = reg; |
| } |
| } |
| if (reg > max) { |
| reg = free_reg; |
| } |
| if (reg > 0) { |
| resource = IOINDEX(0x100 + reg, link); |
| } |
| return resource; |
| } |
| |
| static unsigned amdk8_find_iopair(device_t dev, unsigned nodeid, unsigned link) |
| { |
| return amdk8_find_reg(dev, nodeid, link, 0xc0, 0xd8); |
| } |
| |
| static unsigned amdk8_find_mempair(device_t dev, unsigned nodeid, unsigned link) |
| { |
| return amdk8_find_reg(dev, nodeid, link, 0x80, 0xb8); |
| } |
| |
| static void amdk8_link_read_bases(device_t dev, unsigned nodeid, unsigned link) |
| { |
| struct resource *resource; |
| |
| /* Initialize the io space constraints on the current bus */ |
| resource = new_resource(dev, IOINDEX(0, link)); |
| if (resource) { |
| resource->base = 0; |
| resource->size = 0; |
| resource->align = log2(HT_IO_HOST_ALIGN); |
| resource->gran = log2(HT_IO_HOST_ALIGN); |
| resource->limit = 0xffffUL; |
| resource->flags = IORESOURCE_IO | IORESOURCE_BRIDGE; |
| } |
| |
| /* Initialize the prefetchable memory constraints on the current bus */ |
| resource = new_resource(dev, IOINDEX(2, link)); |
| if (resource) { |
| resource->base = 0; |
| resource->size = 0; |
| resource->align = log2(HT_MEM_HOST_ALIGN); |
| resource->gran = log2(HT_MEM_HOST_ALIGN); |
| resource->limit = 0xffffffffffULL; |
| resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; |
| #ifdef CONFIG_PCI_64BIT_PREF_MEM |
| resource->flags |= IORESOURCE_BRIDGE; |
| #endif |
| } |
| |
| /* Initialize the memory constraints on the current bus */ |
| resource = new_resource(dev, IOINDEX(1, link)); |
| if (resource) { |
| resource->base = 0; |
| resource->size = 0; |
| resource->align = log2(HT_MEM_HOST_ALIGN); |
| resource->gran = log2(HT_MEM_HOST_ALIGN); |
| resource->limit = 0xffffffffULL; |
| resource->flags = IORESOURCE_MEM | IORESOURCE_BRIDGE; |
| } |
| } |
| |
| static void amdk8_create_vga_resource(device_t dev, unsigned nodeid); |
| |
| static void amdk8_read_resources(device_t dev) |
| { |
| unsigned nodeid, link; |
| nodeid = amdk8_nodeid(dev); |
| for(link = 0; link < dev->links; link++) { |
| if (dev->link[link].children) { |
| amdk8_link_read_bases(dev, nodeid, link); |
| } |
| } |
| |
| amdk8_create_vga_resource(dev, nodeid); |
| } |
| |
| static void amdk8_set_resource(device_t dev, struct resource *resource, unsigned nodeid) |
| { |
| resource_t rbase, rend; |
| unsigned reg, link; |
| char buf[50]; |
| |
| /* Make certain the resource has actually been set */ |
| if (!(resource->flags & IORESOURCE_ASSIGNED)) { |
| printk_err("%s: can't set unassigned resource @%lx %lx\n", |
| __func__, resource->index, resource->flags); |
| return; |
| } |
| |
| /* If I have already stored this resource don't worry about it */ |
| if (resource->flags & IORESOURCE_STORED) { |
| printk_err("%s: can't set stored resource @%lx %lx\n", __func__, |
| resource->index, resource->flags); |
| return; |
| } |
| |
| /* Only handle PCI memory and IO resources */ |
| if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO))) |
| return; |
| |
| /* Ensure I am actually looking at a resource of function 1 */ |
| if (resource->index < 0x100) { |
| return; |
| } |
| |
| if (resource->size == 0) |
| return; |
| |
| /* Get the base address */ |
| rbase = resource->base; |
| |
| /* Get the limit (rounded up) */ |
| rend = resource_end(resource); |
| |
| /* Get the register and link */ |
| reg = resource->index & 0xfc; |
| link = IOINDEX_LINK(resource->index); |
| |
| if (resource->flags & IORESOURCE_IO) { |
| uint32_t base, limit; |
| base = f1_read_config32(reg); |
| limit = f1_read_config32(reg + 0x4); |
| base &= 0xfe000fcc; |
| base |= rbase & 0x01fff000; |
| base |= 3; |
| limit &= 0xfe000fc8; |
| limit |= rend & 0x01fff000; |
| limit |= (link & 3) << 4; |
| limit |= (nodeid & 7); |
| |
| if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { |
| printk_spew("%s, enabling legacy VGA IO forwarding for %s link 0x%x\n", |
| __func__, dev_path(dev), link); |
| base |= PCI_IO_BASE_VGA_EN; |
| } |
| if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_NO_ISA) { |
| base |= PCI_IO_BASE_NO_ISA; |
| } |
| |
| f1_write_config32(reg + 0x4, limit); |
| f1_write_config32(reg, base); |
| } |
| else if (resource->flags & IORESOURCE_MEM) { |
| uint32_t base, limit; |
| base = f1_read_config32(reg); |
| limit = f1_read_config32(reg + 0x4); |
| base &= 0x000000f0; |
| base |= (rbase >> 8) & 0xffffff00; |
| base |= 3; |
| limit &= 0x00000048; |
| limit |= (rend >> 8) & 0xffffff00; |
| limit |= (link & 3) << 4; |
| limit |= (nodeid & 7); |
| f1_write_config32(reg + 0x4, limit); |
| f1_write_config32(reg, base); |
| } |
| resource->flags |= IORESOURCE_STORED; |
| sprintf(buf, " <node %d link %d>", |
| nodeid, link); |
| report_resource_stored(dev, resource, buf); |
| } |
| |
| #if CONFIG_CONSOLE_VGA_MULTI == 1 |
| extern device_t vga_pri; // the primary vga device, defined in device.c |
| #endif |
| |
| static void amdk8_create_vga_resource(device_t dev, unsigned nodeid) |
| { |
| struct resource *resource; |
| unsigned link; |
| |
| /* find out which link the VGA card is connected, |
| * we only deal with the 'first' vga card */ |
| for (link = 0; link < dev->links; link++) { |
| if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) { |
| #if CONFIG_CONSOLE_VGA_MULTI == 1 |
| printk_debug("VGA: vga_pri bus num = %d dev->link[link] bus range [%d,%d]\n", vga_pri->bus->secondary, |
| dev->link[link].secondary,dev->link[link].subordinate); |
| /* We need to make sure the vga_pri is under the link */ |
| if((vga_pri->bus->secondary >= dev->link[link].secondary ) && |
| (vga_pri->bus->secondary <= dev->link[link].subordinate ) |
| ) |
| #endif |
| break; |
| } |
| } |
| |
| /* no VGA card installed */ |
| if (link == dev->links) |
| return; |
| |
| printk_debug("VGA: %s (aka node %d) link %d has VGA device\n", dev_path(dev), nodeid, link); |
| |
| /* allocate a temp resource for the legacy VGA buffer */ |
| resource = new_resource(dev, IOINDEX(4, link)); |
| if(!resource){ |
| printk_debug("VGA: %s out of resources.\n", dev_path(dev)); |
| return; |
| } |
| resource->base = 0xa0000; |
| resource->size = 0x20000; |
| resource->limit = 0xffffffff; |
| resource->flags = IORESOURCE_FIXED | IORESOURCE_MEM | |
| IORESOURCE_ASSIGNED; |
| } |
| |
| static void amdk8_set_resources(device_t dev) |
| { |
| unsigned nodeid, link; |
| int i; |
| |
| /* Find the nodeid */ |
| nodeid = amdk8_nodeid(dev); |
| |
| /* Set each resource we have found */ |
| for(i = 0; i < dev->resources; i++) { |
| struct resource *res = &dev->resource[i]; |
| struct resource *old = NULL; |
| unsigned index; |
| |
| if (res->size == 0) /* No need to allocate registers. */ |
| continue; |
| |
| if (res->flags & IORESOURCE_IO) |
| index = amdk8_find_iopair(dev, nodeid, |
| IOINDEX_LINK(res->index)); |
| else |
| index = amdk8_find_mempair(dev, nodeid, |
| IOINDEX_LINK(res->index)); |
| |
| old = probe_resource(dev, index); |
| if (old) { |
| res->index = old->index; |
| old->index = 0; |
| old->flags = 0; |
| } |
| else |
| res->index = index; |
| |
| amdk8_set_resource(dev, res, nodeid); |
| } |
| |
| compact_resources(dev); |
| |
| for(link = 0; link < dev->links; link++) { |
| struct bus *bus; |
| bus = &dev->link[link]; |
| if (bus->children) { |
| assign_resources(bus); |
| } |
| } |
| } |
| |
| static void amdk8_enable_resources(device_t dev) |
| { |
| pci_dev_enable_resources(dev); |
| enable_childrens_resources(dev); |
| } |
| |
| static void mcf0_control_init(struct device *dev) |
| { |
| #if 0 |
| printk_debug("NB: Function 0 Misc Control.. "); |
| #endif |
| #if 0 |
| printk_debug("done.\n"); |
| #endif |
| } |
| |
| static struct device_operations northbridge_operations = { |
| .read_resources = amdk8_read_resources, |
| .set_resources = amdk8_set_resources, |
| .enable_resources = amdk8_enable_resources, |
| .init = mcf0_control_init, |
| .scan_bus = amdk8_scan_chains, |
| .enable = 0, |
| .ops_pci = 0, |
| }; |
| |
| |
| static const struct pci_driver mcf0_driver __pci_driver = { |
| .ops = &northbridge_operations, |
| .vendor = PCI_VENDOR_ID_AMD, |
| .device = 0x1100, |
| }; |
| |
| struct chip_operations northbridge_amd_amdk8_ops = { |
| CHIP_NAME("AMD K8 Northbridge") |
| .enable_dev = 0, |
| }; |
| |
| static void amdk8_domain_read_resources(device_t dev) |
| { |
| unsigned reg; |
| |
| /* Find the already assigned resource pairs */ |
| get_fx_devs(); |
| for(reg = 0x80; reg <= 0xd8; reg+= 0x08) { |
| uint32_t base, limit; |
| base = f1_read_config32(reg); |
| limit = f1_read_config32(reg + 0x04); |
| /* Is this register allocated? */ |
| if ((base & 3) != 0) { |
| unsigned nodeid, link; |
| device_t reg_dev; |
| nodeid = limit & 7; |
| link = (limit >> 4) & 3; |
| reg_dev = __f0_dev[nodeid]; |
| if (reg_dev) { |
| /* Reserve the resource */ |
| struct resource *res; |
| res = new_resource(reg_dev, IOINDEX(0x100 + reg, link)); |
| if (res) { |
| res->base = base; |
| res->limit = limit; |
| res->flags = 1; |
| } |
| } |
| } |
| } |
| |
| pci_domain_read_resources(dev); |
| |
| #if CONFIG_PCI_64BIT_PREF_MEM == 1 |
| /* Initialize the system wide prefetchable memory resources constraints */ |
| resource = new_resource(dev, 2); |
| resource->limit = 0xfcffffffffULL; |
| resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; |
| #endif |
| } |
| |
| static void ram_resource(device_t dev, unsigned long index, |
| unsigned long basek, unsigned long sizek) |
| { |
| struct resource *resource; |
| |
| if (!sizek) { |
| return; |
| } |
| resource = new_resource(dev, index); |
| resource->base = ((resource_t)basek) << 10; |
| resource->size = ((resource_t)sizek) << 10; |
| resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \ |
| IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; |
| } |
| |
| static void tolm_test(void *gp, struct device *dev, struct resource *new) |
| { |
| struct resource **best_p = gp; |
| struct resource *best; |
| best = *best_p; |
| /* Skip VGA. */ |
| if (!best || (best->base > new->base && new->base > 0xa0000)) { |
| best = new; |
| } |
| *best_p = best; |
| } |
| |
| static uint32_t find_pci_tolm(struct bus *bus) |
| { |
| struct resource *min; |
| uint32_t tolm; |
| min = 0; |
| search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); |
| tolm = 0xffffffffUL; |
| if (min && tolm > min->base) { |
| tolm = min->base; |
| } |
| return tolm; |
| } |
| |
| #if CONFIG_HW_MEM_HOLE_SIZEK != 0 |
| |
| struct hw_mem_hole_info { |
| unsigned hole_startk; |
| int node_id; |
| }; |
| |
| static struct hw_mem_hole_info get_hw_mem_hole_info(void) |
| { |
| struct hw_mem_hole_info mem_hole; |
| int i; |
| |
| mem_hole.hole_startk = CONFIG_HW_MEM_HOLE_SIZEK; |
| mem_hole.node_id = -1; |
| |
| for (i = 0; i < fx_devs; i++) { |
| uint32_t base; |
| uint32_t hole; |
| base = f1_read_config32(0x40 + (i << 3)); |
| if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { |
| continue; |
| } |
| |
| hole = pci_read_config32(__f1_dev[i], 0xf0); |
| if(hole & 1) { // we find the hole |
| mem_hole.hole_startk = (hole & (0xff<<24)) >> 10; |
| mem_hole.node_id = i; // record the node No with hole |
| break; // only one hole |
| } |
| } |
| |
| //We need to double check if there is speical set on base reg and limit reg are not continous instead of hole, it will find out it's hole_startk |
| if(mem_hole.node_id==-1) { |
| uint32_t limitk_pri = 0; |
| for(i=0; i<8; i++) { |
| uint32_t base, limit; |
| unsigned base_k, limit_k; |
| base = f1_read_config32(0x40 + (i << 3)); |
| if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { |
| continue; |
| } |
| |
| base_k = (base & 0xffff0000) >> 2; |
| if(limitk_pri != base_k) { // we find the hole |
| mem_hole.hole_startk = limitk_pri; |
| mem_hole.node_id = i; |
| break; //only one hole |
| } |
| |
| limit = f1_read_config32(0x44 + (i << 3)); |
| limit_k = ((limit + 0x00010000) & 0xffff0000) >> 2; |
| limitk_pri = limit_k; |
| } |
| } |
| |
| return mem_hole; |
| |
| } |
| |
| static void disable_hoist_memory(unsigned long hole_startk, int node_id) |
| { |
| int i; |
| device_t dev; |
| uint32_t base, limit; |
| uint32_t hoist; |
| uint32_t hole_sizek; |
| |
| |
| //1. find which node has hole |
| //2. change limit in that node. |
| //3. change base and limit in later node |
| //4. clear that node f0 |
| |
| //if there is not mem hole enabled, we need to change it's base instead |
| |
| hole_sizek = (4*1024*1024) - hole_startk; |
| |
| for(i=7;i>node_id;i--) { |
| |
| base = f1_read_config32(0x40 + (i << 3)); |
| if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { |
| continue; |
| } |
| limit = f1_read_config32(0x44 + (i << 3)); |
| f1_write_config32(0x44 + (i << 3),limit - (hole_sizek << 2)); |
| f1_write_config32(0x40 + (i << 3),base - (hole_sizek << 2)); |
| } |
| limit = f1_read_config32(0x44 + (node_id << 3)); |
| f1_write_config32(0x44 + (node_id << 3),limit - (hole_sizek << 2)); |
| dev = __f1_dev[node_id]; |
| if (dev == NULL) { |
| printk_err("%s: node %x is NULL!\n", __func__, node_id); |
| return; |
| } |
| hoist = pci_read_config32(dev, 0xf0); |
| if(hoist & 1) |
| pci_write_config32(dev, 0xf0, 0); |
| else { |
| base = pci_read_config32(dev, 0x40 + (node_id << 3)); |
| f1_write_config32(0x40 + (node_id << 3),base - (hole_sizek << 2)); |
| } |
| } |
| |
| static uint32_t hoist_memory(unsigned long hole_startk, int node_id) |
| { |
| int i; |
| uint32_t carry_over; |
| device_t dev; |
| uint32_t base, limit; |
| uint32_t basek; |
| uint32_t hoist; |
| |
| carry_over = (4*1024*1024) - hole_startk; |
| |
| for(i=7;i>node_id;i--) { |
| |
| base = f1_read_config32(0x40 + (i << 3)); |
| if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { |
| continue; |
| } |
| limit = f1_read_config32(0x44 + (i << 3)); |
| f1_write_config32(0x44 + (i << 3),limit + (carry_over << 2)); |
| f1_write_config32(0x40 + (i << 3),base + (carry_over << 2)); |
| } |
| limit = f1_read_config32(0x44 + (node_id << 3)); |
| f1_write_config32(0x44 + (node_id << 3),limit + (carry_over << 2)); |
| dev = __f1_dev[node_id]; |
| base = pci_read_config32(dev, 0x40 + (node_id << 3)); |
| basek = (base & 0xffff0000) >> 2; |
| if(basek == hole_startk) { |
| //don't need set memhole here, because hole off set will be 0, overflow |
| //so need to change base reg instead, new basek will be 4*1024*1024 |
| base &= 0x0000ffff; |
| base |= (4*1024*1024)<<2; |
| f1_write_config32(0x40 + (node_id<<3), base); |
| } |
| else if (dev) |
| { |
| hoist = /* hole start address */ |
| ((hole_startk << 10) & 0xff000000) + |
| /* hole address to memory controller address */ |
| (((basek + carry_over) >> 6) & 0x0000ff00) + |
| /* enable */ |
| 1; |
| |
| pci_write_config32(dev, 0xf0, hoist); |
| } |
| |
| return carry_over; |
| } |
| #endif |
| |
| #if CONFIG_HAVE_HIGH_TABLES==1 |
| #define HIGH_TABLES_SIZE 64 // maximum size of high tables in KB |
| extern uint64_t high_tables_base, high_tables_size; |
| #endif |
| |
| static void amdk8_domain_set_resources(device_t dev) |
| { |
| #if CONFIG_PCI_64BIT_PREF_MEM == 1 |
| struct resource *io, *mem1, *mem2; |
| struct resource *resource, *last; |
| #endif |
| unsigned long mmio_basek; |
| uint32_t pci_tolm; |
| int i, idx; |
| #if CONFIG_HW_MEM_HOLE_SIZEK != 0 |
| struct hw_mem_hole_info mem_hole; |
| unsigned reset_memhole = 1; |
| #endif |
| |
| #if 0 |
| /* Place the IO devices somewhere safe */ |
| io = find_resource(dev, 0); |
| io->base = DEVICE_IO_START; |
| #endif |
| #if CONFIG_PCI_64BIT_PREF_MEM == 1 |
| /* Now reallocate the pci resources memory with the |
| * highest addresses I can manage. |
| */ |
| mem1 = find_resource(dev, 1); |
| mem2 = find_resource(dev, 2); |
| |
| #if 1 |
| printk_debug("base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", |
| mem1->base, mem1->limit, mem1->size, mem1->align); |
| printk_debug("base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", |
| mem2->base, mem2->limit, mem2->size, mem2->align); |
| #endif |
| |
| /* See if both resources have roughly the same limits */ |
| if (((mem1->limit <= 0xffffffff) && (mem2->limit <= 0xffffffff)) || |
| ((mem1->limit > 0xffffffff) && (mem2->limit > 0xffffffff))) |
| { |
| /* If so place the one with the most stringent alignment first |
| */ |
| if (mem2->align > mem1->align) { |
| struct resource *tmp; |
| tmp = mem1; |
| mem1 = mem2; |
| mem2 = tmp; |
| } |
| /* Now place the memory as high up as it will go */ |
| mem2->base = resource_max(mem2); |
| mem1->limit = mem2->base - 1; |
| mem1->base = resource_max(mem1); |
| } |
| else { |
| /* Place the resources as high up as they will go */ |
| mem2->base = resource_max(mem2); |
| mem1->base = resource_max(mem1); |
| } |
| |
| #if 1 |
| printk_debug("base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", |
| mem1->base, mem1->limit, mem1->size, mem1->align); |
| printk_debug("base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", |
| mem2->base, mem2->limit, mem2->size, mem2->align); |
| #endif |
| |
| last = &dev->resource[dev->resources]; |
| for(resource = &dev->resource[0]; resource < last; resource++) |
| { |
| resource->flags |= IORESOURCE_ASSIGNED; |
| resource->flags |= IORESOURCE_STORED; |
| report_resource_stored(dev, resource, ""); |
| |
| } |
| #endif |
| |
| |
| pci_tolm = find_pci_tolm(&dev->link[0]); |
| |
| #warning "FIXME handle interleaved nodes" |
| mmio_basek = pci_tolm >> 10; |
| /* Round mmio_basek to something the processor can support */ |
| mmio_basek &= ~((1 << 6) -1); |
| |
| #if 1 |
| #warning "FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M MMIO hole" |
| /* Round the mmio hold to 64M */ |
| mmio_basek &= ~((64*1024) - 1); |
| #endif |
| |
| #if CONFIG_HW_MEM_HOLE_SIZEK != 0 |
| /* if the hw mem hole is already set in raminit stage, here we will compare mmio_basek and hole_basek |
| * if mmio_basek is bigger that hole_basek and will use hole_basek as mmio_basek and we don't need to reset hole. |
| * otherwise We reset the hole to the mmio_basek |
| */ |
| #if CONFIG_K8_REV_F_SUPPORT == 0 |
| if (!is_cpu_pre_e0()) { |
| #endif |
| |
| mem_hole = get_hw_mem_hole_info(); |
| |
| if ((mem_hole.node_id != -1) && (mmio_basek > mem_hole.hole_startk)) { //We will use hole_basek as mmio_basek, and we don't need to reset hole anymore |
| mmio_basek = mem_hole.hole_startk; |
| reset_memhole = 0; |
| } |
| |
| //mmio_basek = 3*1024*1024; // for debug to meet boundary |
| |
| if(reset_memhole) { |
| if(mem_hole.node_id!=-1) { // We need to select CONFIG_HW_MEM_HOLE_SIZEK for raminit, it can not make hole_startk to some basek too....! |
| // We need to reset our Mem Hole, because We want more big HOLE than we already set |
| //Before that We need to disable mem hole at first, becase memhole could already be set on i+1 instead |
| disable_hoist_memory(mem_hole.hole_startk, mem_hole.node_id); |
| } |
| |
| #if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1 |
| //We need to double check if the mmio_basek is valid for hole setting, if it is equal to basek, we need to decrease it some |
| uint32_t basek_pri; |
| for (i = 0; i < fx_devs; i++) { |
| uint32_t base; |
| uint32_t basek; |
| base = f1_read_config32(0x40 + (i << 3)); |
| if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { |
| continue; |
| } |
| |
| basek = (base & 0xffff0000) >> 2; |
| if(mmio_basek == basek) { |
| mmio_basek -= (basek - basek_pri)>>1; // increase mem hole size to make sure it is on middle of pri node |
| break; |
| } |
| basek_pri = basek; |
| } |
| #endif |
| } |
| |
| #if CONFIG_K8_REV_F_SUPPORT == 0 |
| } // is_cpu_pre_e0 |
| #endif |
| |
| #endif |
| |
| idx = 0x10; |
| for(i = 0; i < fx_devs; i++) { |
| uint32_t base, limit; |
| unsigned basek, limitk, sizek; |
| base = f1_read_config32(0x40 + (i << 3)); |
| limit = f1_read_config32(0x44 + (i << 3)); |
| if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { |
| continue; |
| } |
| basek = (base & 0xffff0000) >> 2; |
| limitk = ((limit + 0x00010000) & 0xffff0000) >> 2; |
| sizek = limitk - basek; |
| |
| /* see if we need a hole from 0xa0000 to 0xbffff */ |
| if ((basek < ((8*64)+(8*16))) && (sizek > ((8*64)+(16*16)))) { |
| ram_resource(dev, (idx | i), basek, ((8*64)+(8*16)) - basek); |
| idx += 0x10; |
| basek = (8*64)+(16*16); |
| sizek = limitk - ((8*64)+(16*16)); |
| |
| } |
| |
| |
| // printk_debug("node %d : mmio_basek=%08x, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); //yhlu |
| |
| /* See if I need to split the region to accomodate pci memory space */ |
| if ( (basek < 4*1024*1024 ) && (limitk > mmio_basek) ) { |
| if (basek <= mmio_basek) { |
| unsigned pre_sizek; |
| pre_sizek = mmio_basek - basek; |
| if(pre_sizek>0) { |
| ram_resource(dev, (idx | i), basek, pre_sizek); |
| idx += 0x10; |
| sizek -= pre_sizek; |
| #if CONFIG_HAVE_HIGH_TABLES==1 |
| if (i==0 && high_tables_base==0) { |
| /* Leave some space for ACPI, PIRQ and MP tables */ |
| high_tables_base = (mmio_basek - HIGH_TABLES_SIZE) * 1024; |
| high_tables_size = HIGH_TABLES_SIZE * 1024; |
| printk_debug(" split: %dK table at =%08llx\n", HIGH_TABLES_SIZE, |
| high_tables_base); |
| } |
| #endif |
| } |
| #if CONFIG_HW_MEM_HOLE_SIZEK != 0 |
| if(reset_memhole) |
| #if CONFIG_K8_REV_F_SUPPORT == 0 |
| if(!is_cpu_pre_e0() ) |
| #endif |
| sizek += hoist_memory(mmio_basek,i); |
| #endif |
| |
| basek = mmio_basek; |
| } |
| if ((basek + sizek) <= 4*1024*1024) { |
| sizek = 0; |
| } |
| else { |
| basek = 4*1024*1024; |
| sizek -= (4*1024*1024 - mmio_basek); |
| } |
| } |
| /* If sizek == 0, it was split at mmio_basek without a hole. |
| * Don't create an empty ram_resource. |
| */ |
| if (sizek) |
| ram_resource(dev, (idx | i), basek, sizek); |
| idx += 0x10; |
| #if CONFIG_HAVE_HIGH_TABLES==1 |
| printk_debug("%d: mmio_basek=%08lx, basek=%08x, limitk=%08x\n", |
| i, mmio_basek, basek, limitk); |
| if (i==0 && high_tables_base==0) { |
| /* Leave some space for ACPI, PIRQ and MP tables */ |
| high_tables_base = (limitk - HIGH_TABLES_SIZE) * 1024; |
| high_tables_size = HIGH_TABLES_SIZE * 1024; |
| } |
| #endif |
| } |
| assign_resources(&dev->link[0]); |
| |
| } |
| |
| static unsigned int amdk8_domain_scan_bus(device_t dev, unsigned int max) |
| { |
| unsigned reg; |
| int i; |
| /* Unmap all of the HT chains */ |
| for(reg = 0xe0; reg <= 0xec; reg += 4) { |
| f1_write_config32(reg, 0); |
| } |
| max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0x18, 0), 0xff, max); |
| |
| /* Tune the hypertransport transaction for best performance. |
| * Including enabling relaxed ordering if it is safe. |
| */ |
| get_fx_devs(); |
| for(i = 0; i < fx_devs; i++) { |
| device_t f0_dev; |
| f0_dev = __f0_dev[i]; |
| if (f0_dev && f0_dev->enabled) { |
| uint32_t httc; |
| httc = pci_read_config32(f0_dev, HT_TRANSACTION_CONTROL); |
| httc &= ~HTTC_RSP_PASS_PW; |
| if (!dev->link[0].disable_relaxed_ordering) { |
| httc |= HTTC_RSP_PASS_PW; |
| } |
| printk_spew("%s passpw: %s\n", |
| dev_path(dev), |
| (!dev->link[0].disable_relaxed_ordering)? |
| "enabled":"disabled"); |
| pci_write_config32(f0_dev, HT_TRANSACTION_CONTROL, httc); |
| } |
| } |
| return max; |
| } |
| |
| static struct device_operations pci_domain_ops = { |
| .read_resources = amdk8_domain_read_resources, |
| .set_resources = amdk8_domain_set_resources, |
| .enable_resources = enable_childrens_resources, |
| .init = 0, |
| .scan_bus = amdk8_domain_scan_bus, |
| .ops_pci_bus = &pci_cf8_conf1, |
| }; |
| |
| static unsigned int cpu_bus_scan(device_t dev, unsigned int max) |
| { |
| struct bus *cpu_bus; |
| device_t dev_mc; |
| int bsp_apicid; |
| int i,j; |
| unsigned nb_cfg_54; |
| unsigned siblings; |
| int e0_later_single_core; |
| int disable_siblings; |
| |
| nb_cfg_54 = 0; |
| sysconf.enabled_apic_ext_id = 0; |
| sysconf.lift_bsp_apicid = 0; |
| siblings = 0; |
| |
| /* Find the bootstrap processors apicid */ |
| bsp_apicid = lapicid(); |
| sysconf.apicid_offset = bsp_apicid; |
| |
| disable_siblings = !CONFIG_LOGICAL_CPUS; |
| #if CONFIG_LOGICAL_CPUS == 1 |
| get_option(&disable_siblings, "dual_core"); |
| #endif |
| |
| // for pre_e0, nb_cfg_54 can not be set, ( even set, when you read it still be 0) |
| // How can I get the nb_cfg_54 of every node' nb_cfg_54 in bsp??? and differ d0 and e0 single core |
| |
| nb_cfg_54 = read_nb_cfg_54(); |
| |
| dev_mc = dev_find_slot(0, PCI_DEVFN(0x18, 0)); |
| if (!dev_mc) { |
| die("0:18.0 not found?"); |
| } |
| |
| sysconf.nodes = ((pci_read_config32(dev_mc, 0x60)>>4) & 7) + 1; |
| |
| |
| if (pci_read_config32(dev_mc, 0x68) & (HTTC_APIC_EXT_ID|HTTC_APIC_EXT_BRD_CST)) |
| { |
| sysconf.enabled_apic_ext_id = 1; |
| if(bsp_apicid == 0) { |
| /* bsp apic id is not changed */ |
| sysconf.apicid_offset = CONFIG_APIC_ID_OFFSET; |
| } else |
| { |
| sysconf.lift_bsp_apicid = 1; |
| } |
| |
| } |
| |
| /* Find which cpus are present */ |
| cpu_bus = &dev->link[0]; |
| for(i = 0; i < sysconf.nodes; i++) { |
| device_t cpu_dev, cpu; |
| struct device_path cpu_path; |
| |
| /* Find the cpu's pci device */ |
| cpu_dev = dev_find_slot(0, PCI_DEVFN(0x18 + i, 3)); |
| if (!cpu_dev) { |
| /* If I am probing things in a weird order |
| * ensure all of the cpu's pci devices are found. |
| */ |
| int local_j; |
| device_t dev_f0; |
| for(local_j = 0; local_j <= 3; local_j++) { |
| cpu_dev = pci_probe_dev(NULL, dev_mc->bus, |
| PCI_DEVFN(0x18 + i, local_j)); |
| } |
| /* Ok, We need to set the links for that device. |
| * otherwise the device under it will not be scanned |
| */ |
| dev_f0 = dev_find_slot(0, PCI_DEVFN(0x18+i,0)); |
| if(dev_f0) { |
| dev_f0->links = 3; |
| for(local_j=0;local_j<3;local_j++) { |
| dev_f0->link[local_j].link = local_j; |
| dev_f0->link[local_j].dev = dev_f0; |
| } |
| } |
| |
| } |
| |
| e0_later_single_core = 0; |
| if (cpu_dev && cpu_dev->enabled) { |
| j = pci_read_config32(cpu_dev, 0xe8); |
| j = (j >> 12) & 3; // dev is func 3 |
| printk_debug(" %s siblings=%d\n", dev_path(cpu_dev), j); |
| |
| if(nb_cfg_54) { |
| // For e0 single core if nb_cfg_54 is set, apicid will be 0, 2, 4.... |
| // ----> you can mixed single core e0 and dual core e0 at any sequence |
| // That is the typical case |
| |
| if(j == 0 ){ |
| #if CONFIG_K8_REV_F_SUPPORT == 0 |
| e0_later_single_core = is_e0_later_in_bsp(i); // single core |
| #else |
| e0_later_single_core = is_cpu_f0_in_bsp(i); // We can read cpuid(1) from Func3 |
| #endif |
| } else { |
| e0_later_single_core = 0; |
| } |
| if(e0_later_single_core) { |
| printk_debug("\tFound Rev E or Rev F later single core\r\n"); |
| |
| j=1; |
| } |
| |
| if(siblings > j ) { |
| } |
| else { |
| siblings = j; |
| } |
| } else { |
| siblings = j; |
| } |
| } |
| |
| unsigned jj; |
| if(e0_later_single_core || disable_siblings) { |
| jj = 0; |
| } else |
| { |
| jj = siblings; |
| } |
| #if 0 |
| jj = 0; // if create cpu core1 path in amd_siblings by core0 |
| #endif |
| |
| for (j = 0; j <=jj; j++ ) { |
| |
| /* Build the cpu device path */ |
| cpu_path.type = DEVICE_PATH_APIC; |
| cpu_path.apic.apic_id = i * (nb_cfg_54?(siblings+1):1) + j * (nb_cfg_54?1:8); |
| |
| /* See if I can find the cpu */ |
| cpu = find_dev_path(cpu_bus, &cpu_path); |
| |
| /* Enable the cpu if I have the processor */ |
| if (cpu_dev && cpu_dev->enabled) { |
| if (!cpu) { |
| cpu = alloc_dev(cpu_bus, &cpu_path); |
| } |
| if (cpu) { |
| cpu->enabled = 1; |
| } |
| } |
| |
| /* Disable the cpu if I don't have the processor */ |
| if (cpu && (!cpu_dev || !cpu_dev->enabled)) { |
| cpu->enabled = 0; |
| } |
| |
| /* Report what I have done */ |
| if (cpu) { |
| cpu->path.apic.node_id = i; |
| cpu->path.apic.core_id = j; |
| if(sysconf.enabled_apic_ext_id) { |
| if(sysconf.lift_bsp_apicid) { |
| cpu->path.apic.apic_id += sysconf.apicid_offset; |
| } else |
| { |
| if (cpu->path.apic.apic_id != 0) |
| cpu->path.apic.apic_id += sysconf.apicid_offset; |
| } |
| } |
| printk_debug("CPU: %s %s\n", |
| dev_path(cpu), cpu->enabled?"enabled":"disabled"); |
| } |
| |
| } //j |
| } |
| return max; |
| } |
| |
| static void cpu_bus_init(device_t dev) |
| { |
| initialize_cpus(&dev->link[0]); |
| } |
| |
| static void cpu_bus_noop(device_t dev) |
| { |
| } |
| |
| static struct device_operations cpu_bus_ops = { |
| .read_resources = cpu_bus_noop, |
| .set_resources = cpu_bus_noop, |
| .enable_resources = cpu_bus_noop, |
| .init = cpu_bus_init, |
| .scan_bus = cpu_bus_scan, |
| }; |
| |
| static void root_complex_enable_dev(struct device *dev) |
| { |
| /* Set the operations if it is a special bus type */ |
| if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { |
| dev->ops = &pci_domain_ops; |
| } |
| else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { |
| dev->ops = &cpu_bus_ops; |
| } |
| } |
| |
| struct chip_operations northbridge_amd_amdk8_root_complex_ops = { |
| CHIP_NAME("AMD K8 Root Complex") |
| .enable_dev = root_complex_enable_dev, |
| }; |