| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de> |
| ## |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; either version 2 of the License, or |
| ## (at your option) any later version. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| ## You should have received a copy of the GNU General Public License |
| ## along with this program; if not, write to the Free Software |
| ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| ## |
| |
| ## CONFIG_XIP_ROM_SIZE must be a power of 2. |
| default CONFIG_XIP_ROM_SIZE = 64 * 1024 |
| include /config/nofailovercalculation.lb |
| |
| arch i386 end |
| driver mainboard.o |
| if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end |
| if CONFIG_HAVE_MP_TABLE object mptable.o end |
| if CONFIG_HAVE_ACPI_TABLES |
| object fadt.o |
| object dsdt.o |
| object acpi_tables.o |
| end |
| makerule ./failover.E |
| depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" |
| action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" |
| end |
| makerule ./failover.inc |
| depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" |
| action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" |
| end |
| makerule ./auto.E |
| depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" |
| action "../romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" |
| end |
| makerule ./auto.inc |
| depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" |
| action "../romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" |
| end |
| mainboardinit cpu/x86/16bit/entry16.inc |
| mainboardinit cpu/x86/32bit/entry32.inc |
| ldscript /cpu/x86/16bit/entry16.lds |
| ldscript /cpu/x86/32bit/entry32.lds |
| if CONFIG_USE_FALLBACK_IMAGE |
| mainboardinit cpu/x86/16bit/reset16.inc |
| ldscript /cpu/x86/16bit/reset16.lds |
| else |
| mainboardinit cpu/x86/32bit/reset32.inc |
| ldscript /cpu/x86/32bit/reset32.lds |
| end |
| mainboardinit arch/i386/lib/cpu_reset.inc |
| mainboardinit arch/i386/lib/id.inc |
| ldscript /arch/i386/lib/id.lds |
| if CONFIG_USE_FALLBACK_IMAGE |
| ldscript /arch/i386/lib/failover.lds |
| mainboardinit ./failover.inc |
| end |
| mainboardinit cpu/x86/fpu/enable_fpu.inc |
| mainboardinit cpu/x86/mmx/enable_mmx.inc |
| mainboardinit ./auto.inc |
| mainboardinit cpu/x86/mmx/disable_mmx.inc |
| dir /pc80 |
| config chip.h |
| |
| chip northbridge/via/cn700 # Northbridge |
| device pci_domain 0 on # PCI domain |
| device pci 0.0 on end # AGP Bridge |
| device pci 0.1 on end # Error Reporting |
| device pci 0.2 on end # Host Bus Control |
| device pci 0.3 on end # Memory Controller |
| device pci 0.4 on end # Power Management |
| device pci 0.7 on end # V-Link Controller |
| device pci 1.0 on end # PCI Bridge |
| chip southbridge/via/vt8237r # Southbridge |
| # Enable both IDE channels. |
| register "ide0_enable" = "1" |
| register "ide1_enable" = "1" |
| # Both cables are 40pin. |
| register "ide0_80pin_cable" = "0" |
| register "ide1_80pin_cable" = "0" |
| device pci f.0 on end # SATA |
| device pci f.1 on end # IDE |
| register "fn_ctrl_lo" = "0x80" |
| register "fn_ctrl_hi" = "0x1d" |
| device pci 10.0 on end # UHCI |
| device pci 10.1 on end # UHCI |
| device pci 10.2 on end # UHCI |
| device pci 10.3 on end # UHCI |
| device pci 10.4 on end # EHCI |
| device pci 10.5 on end # UDCI |
| device pci 11.0 on # Southbridge LPC |
| chip superio/ite/it8716f # Super I/O |
| device pnp 2e.0 on # Floppy |
| io 0x60 = 0x3f0 |
| irq 0x70 = 6 |
| drq 0x74 = 2 |
| end |
| device pnp 2e.1 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.2 off # COM2 (N/A on this board) |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 2e.3 on # Parallel port |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| drq 0x74 = 3 |
| end |
| device pnp 2e.4 on # Environment controller |
| io 0x60 = 0x290 |
| io 0x62 = 0x0000 |
| irq 0x70 = 9 |
| end |
| device pnp 2e.5 off # PS/2 keyboard (not used) |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 |
| end |
| device pnp 2e.6 off # PS/2 mouse (not used) |
| irq 0x70 = 12 |
| end |
| device pnp 2e.7 on # GPIO |
| io 0x60 = 0x0000 |
| io 0x62 = 0x0800 |
| io 0x64 = 0x0000 |
| end |
| device pnp 2e.8 off # MIDI port (N/A) |
| io 0x60 = 0x300 |
| irq 0x70 = 10 |
| end |
| device pnp 2e.9 off # Game port (N/A) |
| io 0x60 = 0x201 |
| end |
| device pnp 2e.a on # Consumer IR |
| io 0x60 = 0x310 |
| irq 0x70 = 11 |
| end |
| end |
| end |
| device pci 11.5 on end # AC'97 audio |
| # device pci 11.6 off end # AC'97 modem (N/A) |
| device pci 12.0 on end # Ethernet |
| end |
| end |
| device apic_cluster 0 on # APIC cluster |
| chip cpu/via/model_c7 # VIA C7 |
| device apic 0 on end # APIC |
| end |
| end |
| end |