| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2008 LiPPERT Embedded Computers GmbH |
| ## |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; either version 2 of the License, or |
| ## (at your option) any later version. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| ## You should have received a copy of the GNU General Public License |
| ## along with this program; if not, write to the Free Software |
| ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| ## |
| |
| ## Based on Options.lb from AMD's DB800 mainboard. |
| |
| uses CONFIG_HAVE_MP_TABLE |
| uses CONFIG_HAVE_PIRQ_TABLE |
| uses CONFIG_USE_FALLBACK_IMAGE |
| uses CONFIG_HAVE_FALLBACK_BOOT |
| uses CONFIG_HAVE_HARD_RESET |
| uses CONFIG_HAVE_OPTION_TABLE |
| uses CONFIG_USE_OPTION_TABLE |
| uses CONFIG_ROM_PAYLOAD |
| uses CONFIG_IRQ_SLOT_COUNT |
| uses CONFIG_MAINBOARD |
| uses CONFIG_MAINBOARD_VENDOR |
| uses CONFIG_MAINBOARD_PART_NUMBER |
| uses COREBOOT_EXTRA_VERSION |
| uses CONFIG_ARCH |
| uses CONFIG_FALLBACK_SIZE |
| uses CONFIG_STACK_SIZE |
| uses CONFIG_HEAP_SIZE |
| uses CONFIG_ROM_SIZE |
| uses CONFIG_ROM_SECTION_SIZE |
| uses CONFIG_ROM_IMAGE_SIZE |
| uses CONFIG_ROM_SECTION_SIZE |
| uses CONFIG_ROM_SECTION_OFFSET |
| uses CONFIG_COMPRESS |
| uses CONFIG_COMPRESSED_PAYLOAD_NRV2B |
| uses CONFIG_COMPRESSED_PAYLOAD_LZMA |
| uses CONFIG_PRECOMPRESSED_PAYLOAD |
| uses CONFIG_ROMBASE |
| uses CONFIG_RAMBASE |
| uses CONFIG_XIP_ROM_SIZE |
| uses CONFIG_XIP_ROM_BASE |
| uses CONFIG_HAVE_MP_TABLE |
| uses CONFIG_CROSS_COMPILE |
| uses CC |
| uses HOSTCC |
| uses CONFIG_OBJCOPY |
| uses CONFIG_DEBUG |
| uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL |
| uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL |
| uses CONFIG_CONSOLE_SERIAL8250 |
| uses CONFIG_TTYS0_BAUD |
| uses CONFIG_TTYS0_BASE |
| uses CONFIG_TTYS0_LCS |
| uses CONFIG_UDELAY_TSC |
| uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 |
| uses CONFIG_CONSOLE_VGA |
| uses CONFIG_PCI_ROM_RUN |
| uses CONFIG_VIDEO_MB |
| uses CONFIG_USE_DCACHE_RAM |
| uses CONFIG_DCACHE_RAM_BASE |
| uses CONFIG_DCACHE_RAM_SIZE |
| uses CONFIG_USE_PRINTK_IN_CAR |
| uses CONFIG_PIRQ_ROUTE |
| |
| ## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. |
| default CONFIG_ROM_SIZE = 512*1024 |
| |
| ### |
| ### Build options |
| ### |
| default CONFIG_CONSOLE_VGA = 0 |
| default CONFIG_VIDEO_MB = 8 |
| default CONFIG_PCI_ROM_RUN = 0 |
| |
| ## |
| ## Build code for the fallback boot |
| ## |
| default CONFIG_HAVE_FALLBACK_BOOT = 1 |
| |
| ## |
| ## no MP table |
| ## |
| default CONFIG_HAVE_MP_TABLE = 0 |
| |
| ## |
| ## Build code to reset the motherboard from coreboot |
| ## |
| default CONFIG_HAVE_HARD_RESET = 0 |
| |
| ## Delay timer options |
| ## |
| default CONFIG_UDELAY_TSC = 1 |
| default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 |
| |
| ## |
| ## Build code to export a programmable irq routing table |
| ## |
| default CONFIG_HAVE_PIRQ_TABLE = 1 |
| default CONFIG_IRQ_SLOT_COUNT = 7 |
| default CONFIG_PIRQ_ROUTE = 1 |
| |
| ## |
| ## Build code to export a CMOS option table |
| ## |
| default CONFIG_HAVE_OPTION_TABLE = 0 |
| |
| ### |
| ### coreboot layout values |
| ### |
| |
| ## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. |
| default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 |
| default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE |
| |
| ## |
| ## enable CACHE_AS_RAM specifics |
| ## |
| default CONFIG_USE_DCACHE_RAM = 1 |
| default CONFIG_DCACHE_RAM_BASE = 0xc8000 |
| default CONFIG_DCACHE_RAM_SIZE = 0x08000 |
| default CONFIG_USE_PRINTK_IN_CAR=1 |
| |
| ## |
| ## Use a small 8K stack |
| ## |
| default CONFIG_STACK_SIZE = 0x2000 |
| |
| ## |
| ## Use a small 16K heap |
| ## |
| default CONFIG_HEAP_SIZE = 0x4000 |
| |
| ## |
| ## Only use the option table in a normal image |
| ## |
| #default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE |
| default CONFIG_USE_OPTION_TABLE = 0 |
| |
| default CONFIG_RAMBASE = 0x00004000 |
| |
| default CONFIG_ROM_PAYLOAD = 1 |
| |
| ## |
| ## The default compiler |
| ## |
| default CONFIG_CROSS_COMPILE = "" |
| default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32" |
| default HOSTCC = "gcc" |
| |
| ## |
| ## The Serial Console |
| ## |
| |
| # To Enable the Serial Console |
| default CONFIG_CONSOLE_SERIAL8250 = 1 |
| |
| ## Select the serial console baud rate |
| default CONFIG_TTYS0_BAUD = 115200 |
| #default CONFIG_TTYS0_BAUD = 57600 |
| #default CONFIG_TTYS0_BAUD = 38400 |
| #default CONFIG_TTYS0_BAUD = 19200 |
| #default CONFIG_TTYS0_BAUD = 9600 |
| #default CONFIG_TTYS0_BAUD = 4800 |
| #default CONFIG_TTYS0_BAUD = 2400 |
| #default CONFIG_TTYS0_BAUD = 1200 |
| |
| # Select the serial console base port |
| default CONFIG_TTYS0_BASE = 0x3f8 |
| |
| # Select the serial protocol |
| # This defaults to 8 data bits, 1 stop bit, and no parity |
| default CONFIG_TTYS0_LCS = 0x3 |
| |
| # Compile extra debugging code |
| default CONFIG_DEBUG = 1 |
| |
| ## |
| ### Select the coreboot loglevel |
| ## |
| ## EMERG 1 system is unusable |
| ## ALERT 2 action must be taken immediately |
| ## CRIT 3 critical conditions |
| ## ERR 4 error conditions |
| ## WARNING 5 warning conditions |
| ## NOTICE 6 normal but significant condition |
| ## INFO 7 informational |
| ## CONFIG_DEBUG 8 debug-level messages |
| ## SPEW 9 Way too many details |
| |
| ## Request this level of debugging output |
| default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8 |
| ## At a maximum only compile in this level of debugging |
| default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8 |
| |
| end |