| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2007-2008 coresystems GmbH |
| ## |
| ## This program is free software; you can redistribute it and/or |
| ## modify it under the terms of the GNU General Public License as |
| ## published by the Free Software Foundation; version 2 of |
| ## the License. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| ## You should have received a copy of the GNU General Public License |
| ## along with this program; if not, write to the Free Software |
| ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| ## MA 02110-1301 USA |
| ## |
| |
| ## |
| ## This mainboard requires DCACHE_AS_RAM enabled. It won't work without. |
| ## |
| |
| ## |
| ## Only use the option table in a normal image |
| ## |
| default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE |
| |
| ## |
| ## Image size calculation |
| ## |
| |
| include /config/nofailovercalculation.lb |
| |
| ## |
| ## Set all of the defaults for an x86 architecture |
| ## |
| |
| arch i386 end |
| |
| ## |
| ## Build the objects we have code for in this directory. |
| ## |
| |
| driver mainboard.o |
| driver rtl8168.o |
| if CONFIG_HAVE_MP_TABLE object mptable.o end |
| if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end |
| if CONFIG_HAVE_SMI_HANDLER smmobject mainboard_smi.o end |
| |
| if CONFIG_HAVE_ACPI_TABLES |
| object fadt.o |
| object acpi_tables.o |
| makerule dsdt.c |
| depends "$(CONFIG_MAINBOARD)/dsdt.asl" |
| action "iasl -p dsdt -tc $(CONFIG_MAINBOARD)/dsdt.asl" |
| action "mv $(CURDIR)/dsdt.hex dsdt.c" |
| end |
| object ./dsdt.o |
| end |
| |
| object reset.o |
| |
| if CONFIG_USE_INIT |
| |
| makerule ./auto.o |
| depends "$(CONFIG_MAINBOARD)/auto.c option_table.h" |
| action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/auto.c -o $@" |
| end |
| |
| else |
| |
| makerule ./auto.inc |
| depends "$(CONFIG_MAINBOARD)/auto.c option_table.h" |
| action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/auto.c -o $@" |
| action "perl -e 's/\.rodata/.rom.data/g' -pi $@" |
| action "perl -e 's/\.text/.section .rom.text/g' -pi $@" |
| end |
| |
| end |
| |
| ## |
| ## Build our 16 bit and 32 bit coreboot entry code |
| ## |
| mainboardinit cpu/x86/16bit/entry16.inc |
| mainboardinit cpu/x86/32bit/entry32.inc |
| ldscript /cpu/x86/16bit/entry16.lds |
| if CONFIG_USE_INIT |
| ldscript /cpu/x86/32bit/entry32.lds |
| ldscript /cpu/x86/car/cache_as_ram.lds |
| end |
| |
| ## |
| ## Build our reset vector (This is where coreboot is entered) |
| ## |
| if CONFIG_USE_FALLBACK_IMAGE |
| mainboardinit cpu/x86/16bit/reset16.inc |
| ldscript /cpu/x86/16bit/reset16.lds |
| else |
| mainboardinit cpu/x86/32bit/reset32.inc |
| ldscript /cpu/x86/32bit/reset32.lds |
| end |
| |
| |
| ## |
| ## Include an id string (For safe flashing) |
| ## |
| mainboardinit arch/i386/lib/id.inc |
| ldscript /arch/i386/lib/id.lds |
| |
| ## |
| ## Setup Cache-As-Ram |
| ## |
| mainboardinit cpu/intel/model_6ex/cache_as_ram.inc |
| |
| ### |
| ### This is the early phase of coreboot startup |
| ### Things are delicate and we test to see if we should |
| ### failover to another image. |
| ### |
| if CONFIG_USE_FALLBACK_IMAGE |
| ldscript /arch/i386/lib/failover.lds |
| end |
| |
| ### |
| ### O.k. We aren't just an intermediary anymore! |
| ### |
| |
| if CONFIG_USE_INIT |
| initobject auto.o |
| else |
| mainboardinit ./auto.inc |
| end |
| |
| ## |
| ## Include the secondary Configuration files |
| ## |
| dir /pc80 |
| config chip.h |
| |
| chip northbridge/intel/i945 |
| |
| device apic_cluster 0 on |
| chip cpu/intel/socket_mFCPGA478 |
| device apic 0 on end |
| end |
| end |
| |
| device pci_domain 0 on |
| device pci 00.0 on end # host bridge |
| device pci 01.0 off end # i945 PCIe root port |
| chip drivers/pci/onboard |
| device pci 02.0 on end # vga controller |
| # register "rom_address" = "0xfffc0000" # 256 KB image |
| # register "rom_address" = "0xfff80000" # 512 KB image |
| register "rom_address" = "0xfff00000" # 1 MB image |
| end |
| device pci 02.1 on end # display controller |
| |
| chip southbridge/intel/i82801gx |
| register "pirqa_routing" = "0x05" |
| register "pirqb_routing" = "0x07" |
| register "pirqc_routing" = "0x05" |
| register "pirqd_routing" = "0x07" |
| register "pirqe_routing" = "0x80" |
| register "pirqf_routing" = "0x80" |
| register "pirqg_routing" = "0x80" |
| register "pirqh_routing" = "0x06" |
| |
| # GPI routing |
| # 0 No effect (default) |
| # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) |
| # 2 SCI (if corresponding GPIO_EN bit is also set) |
| register "gpi13_routing" = "1" |
| |
| register "ide_legacy_combined" = "0x1" |
| register "ide_enable_primary" = "0x1" |
| register "ide_enable_secondary" = "0x1" |
| register "sata_ahci" = "0x0" |
| |
| device pci 1b.0 on end # High Definition Audio |
| device pci 1c.0 on end # PCIe |
| device pci 1c.1 on end # PCIe |
| device pci 1c.2 on end # PCIe |
| #device pci 1c.3 off end # PCIe port 4 |
| #device pci 1c.4 off end # PCIe port 5 |
| #device pci 1c.5 off end # PCIe port 6 |
| device pci 1d.0 on end # USB UHCI |
| device pci 1d.1 on end # USB UHCI |
| device pci 1d.2 on end # USB UHCI |
| device pci 1d.3 on end # USB UHCI |
| device pci 1d.7 on end # USB2 EHCI |
| device pci 1e.0 on end # PCI bridge |
| #device pci 1e.2 off end # AC'97 Audio |
| #device pci 1e.3 off end # AC'97 Modem |
| device pci 1f.0 on # LPC bridge |
| chip superio/winbond/w83627thg |
| device pnp 2e.0 off # Floppy |
| end |
| device pnp 2e.1 off # Parport |
| end |
| device pnp 2e.2 on |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.3 on |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq |
| end |
| device pnp 2e.5 on # Keyboard+Mouse |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 |
| irq 0x72 = 12 |
| irq 0xf0 = 0x82 # HW accel A20. |
| end |
| device pnp 2e.7 on # GPIO1, GAME, MIDI |
| io 0x62 = 0x330 |
| irq 0x70 = 9 |
| end |
| device pnp 2e.8 on # GPIO2 |
| # all default |
| end |
| device pnp 2e.9 on # GPIO3/4 |
| irq 0x30 = 0x03 # does this work? |
| irq 0xf0 = 0xfb # set inputs/outputs |
| irq 0xf1 = 0x66 |
| end |
| device pnp 2e.a off # ACPI |
| end |
| device pnp 2e.b on # HWM |
| io 0x60 = 0xa00 |
| irq 0x70 = 0 |
| end |
| |
| end |
| chip superio/winbond/w83627thg |
| device pnp 4e.0 off # Floppy |
| end |
| device pnp 4e.1 off # Parport |
| end |
| device pnp 4e.2 on # COM3 |
| io 0x60 = 0x3e8 |
| irq 0x70 = 11 |
| end |
| device pnp 4e.3 on # COM4 |
| io 0x60 = 0x2e8 |
| irq 0x70 = 10 |
| end |
| device pnp 4e.5 off # Keyboard |
| end |
| device pnp 4e.7 off # GPIO1, GAME, MIDI |
| end |
| device pnp 4e.8 off # GPIO2 |
| end |
| device pnp 4e.9 off # GPIO3/4 |
| end |
| device pnp 4e.a off # ACPI |
| end |
| device pnp 4e.b off # HWM |
| end |
| end |
| |
| end |
| #device pci 1f.1 off end # IDE |
| device pci 1f.2 on end # SATA |
| device pci 1f.3 on end # SMBus |
| #device pci 1f.4 off end # Realtek ID Codec |
| end |
| end |
| end |