| ## |
| ## This file is part of the coreboot repair project. |
| ## |
| ## Redistribution and use in source and binary forms, with or without |
| ## modification, are permitted provided that the following conditions |
| ## are met: |
| ## 1. Redistributions of source code must retain the above copyright |
| ## notice, this list of conditions and the following disclaimer. |
| ## 2. Redistributions in binary form must reproduce the above copyright |
| ## notice, this list of conditions and the following disclaimer in the |
| ## documentation and/or other materials provided with the distribution. |
| ## 3. The name of the author may not be used to endorse or promote products |
| ## derived from this software without specific prior written permission. |
| ## |
| ## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| ## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| ## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ## ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| ## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| ## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| ## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| ## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| ## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| ## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| ## SUCH DAMAGE. |
| ## |
| |
| mainmenu "Coreboot Configuration" |
| |
| menu "General setup" |
| |
| config LOCALVERSION |
| string "Local version string" |
| help |
| Append an extra string to the end of the coreboot version. |
| |
| This can be useful if, for instance, you want to append the |
| respective board's hostname or some other identifying string to |
| the coreboot version number, so that you can easily distinguish |
| boot logs of different boards from each other. |
| |
| endmenu |
| |
| source src/mainboard/Kconfig |
| source src/arch/i386/Kconfig |
| source src/arch/ppc/Kconfig |
| source src/northbridge/Kconfig |
| source src/devices/Kconfig |
| source src/southbridge/Kconfig |
| source src/superio/Kconfig |
| source src/cpu/Kconfig |
| |
| config PCI_BUS_SEGN_BITS |
| int |
| default 0 |
| |
| config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID |
| hex |
| default 0x0 |
| |
| config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID |
| hex |
| default 0x0 |
| |
| config CPU_ADDR_BITS |
| int |
| default 36 |
| |
| config AGP_APERTURE_SIZE |
| hex |
| default 0x0 |
| |
| config XIP_ROM_BASE |
| hex |
| default 0xfffe0000 |
| |
| config XIP_ROM_SIZE |
| hex |
| default 0x20000 |
| |
| config LB_CKS_RANGE_START |
| int |
| default 49 |
| |
| config LB_CKS_RANGE_END |
| int |
| default 125 |
| |
| config LB_CKS_LOC |
| int |
| default 126 |
| |
| config LOGICAL_CPUS |
| bool |
| default y |
| |
| config PCI_ROM_RUN |
| bool |
| default n |
| |
| config HEAP_SIZE |
| hex |
| default 0x2000 |
| |
| config COREBOOT_V2 |
| bool |
| default y |
| |
| config COREBOOT_V4 |
| bool |
| default y |
| |
| config DEBUG |
| bool |
| default n |
| |
| config USE_PRINTK_IN_CAR |
| bool |
| default n |
| |
| config USE_OPTION_TABLE |
| bool |
| default n |
| |
| config MAX_CPUS |
| int |
| default 1 |
| |
| config MMCONF_SUPPORT_DEFAULT |
| bool |
| default n |
| |
| config MMCONF_SUPPORT |
| bool |
| default n |
| |
| config LB_MEM_TOPK |
| hex |
| default 0x800 |
| |
| config COMPRESSED_PAYLOAD_LZMA |
| bool |
| default y |
| |
| config COMPRESSED_PAYLOAD_NRV2B |
| bool |
| default n |
| |
| config ATI_RAGE_XL |
| bool |
| default n |
| |
| source src/console/Kconfig |
| |
| config HAVE_ACPI_RESUME |
| bool |
| default n |
| |
| config ACPI_SSDTX_NUM |
| int |
| default 0 |
| |
| config HAVE_FALLBACK_BOOT |
| bool |
| default y |
| |
| config USE_FALLBACK_IMAGE |
| bool |
| default y |
| |
| config HAVE_FAILOVER_BOOT |
| bool |
| default n |
| |
| config USE_FAILOVER_IMAGE |
| bool |
| default n |
| |
| config HAVE_HARD_RESET |
| bool |
| default n |
| |
| config HAVE_INIT_TIMER |
| bool |
| default n |
| |
| config HAVE_MAINBOARD_RESOURCES |
| bool |
| default n |
| |
| config HAVE_MOVNTI |
| bool |
| default y |
| |
| config HAVE_OPTION_TABLE |
| bool |
| default y |
| |
| config PIRQ_ROUTE |
| bool |
| default n |
| |
| config HAVE_SMI_HANDLER |
| bool |
| default n |
| |
| config PCI_IO_CFG_EXT |
| bool |
| default n |
| |
| config IOAPIC |
| bool |
| default n |
| |
| config VIDEO_MB |
| int |
| default 0 |
| |
| config USE_WATCHDOG_ON_BOOT |
| bool |
| default n |
| |
| config VGA |
| bool |
| default n |
| help |
| Build board-specific VGA code. |
| |
| config GFXUMA |
| bool |
| default n |
| help |
| Enable Unified Memory Architecture for graphics. |
| |
| # TODO |
| # menu "Drivers" |
| # |
| # endmenu |
| |
| menu "System tables" |
| |
| config HAVE_LOW_TABLES |
| bool |
| default y |
| |
| config HAVE_HIGH_TABLES |
| bool "Write 'high' tables to avoid being overwritten in F segment" |
| default y |
| |
| config MULTIBOOT |
| bool "Generate Multiboot tables (for GRUB2)" |
| default n |
| |
| config HAVE_ACPI_TABLES |
| bool "Generate ACPI tables" |
| default n |
| |
| config HAVE_MP_TABLE |
| bool "Generate an MP table" |
| default n |
| |
| config HAVE_PIRQ_TABLE |
| bool "Generate a PIRQ table" |
| default n |
| |
| endmenu |
| |
| menu "Payload" |
| |
| choice |
| prompt "Add a payload" |
| default PAYLOAD_NONE |
| |
| config PAYLOAD_NONE |
| bool "None" |
| help |
| Select this option if you want to create an "empty" coreboot |
| ROM image for a certain mainboard, i.e. a coreboot ROM image |
| which does not yet contain a payload. |
| |
| For such an image to be useful, you have to use 'cbfstool' |
| to add a payload to the ROM image later. |
| |
| config PAYLOAD_ELF |
| bool "An ELF executable payload" |
| help |
| Select this option if you have a payload image (an ELF file) |
| which coreboot should run as soon as the basic hardware |
| initialization is completed. |
| |
| You will be able to specify the location and file name of the |
| payload image later. |
| |
| endchoice |
| |
| config FALLBACK_PAYLOAD_FILE |
| string "Payload path and filename" |
| depends on PAYLOAD_ELF |
| default "payload.elf" |
| help |
| The path and filename of the ELF executable file to use as payload. |
| |
| # TODO: Defined if no payload? Breaks build? |
| config COMPRESSED_PAYLOAD_LZMA |
| bool "Use LZMA compression for payloads" |
| default y |
| depends on PAYLOAD_ELF |
| help |
| In order to reduce the size payloads take up in the ROM chip |
| coreboot can compress them using the LZMA algorithm. |
| |
| endmenu |
| |
| menu "VGA BIOS" |
| |
| config VGA_BIOS |
| bool "Add a VGA BIOS image" |
| help |
| Select this option if you have a VGA BIOS image that you would |
| like to add to your ROM. |
| |
| You will be able to specify the location and file name of the |
| image later. |
| |
| config FALLBACK_VGA_BIOS_FILE |
| string "VGA BIOS path and filename" |
| depends on VGA_BIOS |
| default "vgabios.bin" |
| help |
| The path and filename of the file to use as VGA BIOS. |
| |
| config FALLBACK_VGA_BIOS_ID |
| string "VGA BIOS ID" |
| depends on VGA_BIOS |
| default "1106,3230" |
| help |
| The comma-separated PCI vendor and device ID that would associate |
| your VGA BIOS to your video card. |
| |
| Example: 1106,3230 |
| |
| In the above example 1106 is the PCI vendor ID (in hex, but without |
| the "0x" prefix) and 3230 specifies the PCI device ID of the |
| video card (also in hex, without "0x" prefix). |
| |
| endmenu |
| |
| menu "Debugging" |
| |
| # TODO: Better help text and detailed instructions. |
| config GDB_STUB |
| bool "GDB debugging support" |
| default y |
| help |
| If enabled, you will be able to set breakpoints for gdb debugging. |
| See src/arch/i386/lib/c_start.S for details. |
| |
| endmenu |
| |