| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2007-2009 coresystems GmbH |
| ## Copyright (C) 2016 Arthur Heymans arthur@aheymans.xyz |
| ## |
| ## This program is free software; you can redistribute it and/or |
| ## modify it under the terms of the GNU General Public License as |
| ## published by the Free Software Foundation; version 2 of the License. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| |
| chip northbridge/intel/i945 |
| |
| device cpu_cluster 0 on |
| chip cpu/intel/socket_LGA775 |
| device lapic 0 on end |
| end |
| chip cpu/intel/model_1067x |
| device lapic 0xACAC off end |
| end |
| end |
| |
| device domain 0 on |
| device pci 00.0 on # host bridge |
| subsystemid 0x1458 0x5000 |
| end |
| device pci 01.0 on # i945 PCIe root port |
| subsystemid 0x1458 0x5000 |
| ioapic_irq 2 INTA 0x10 |
| end |
| device pci 02.0 on # vga controller |
| subsystemid 0x1458 0xd000 |
| ioapic_irq 2 INTA 0x10 |
| end |
| |
| chip southbridge/intel/i82801gx |
| register "pirqa_routing" = "0x8c" |
| register "pirqb_routing" = "0x8a" |
| register "pirqc_routing" = "0x83" |
| register "pirqd_routing" = "0x8b" |
| register "pirqe_routing" = "0x80" |
| register "pirqf_routing" = "0x80" |
| register "pirqg_routing" = "0x80" |
| register "pirqh_routing" = "0x85" |
| |
| # GPI routing |
| # 0 No effect (default) |
| # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) |
| # 2 SCI (if corresponding GPIO_EN bit is also set) |
| register "gpi0_routing" = "1" |
| register "gpi1_routing" = "1" |
| register "gpi2_routing" = "1" |
| register "gpi3_routing" = "1" |
| register "gpi4_routing" = "1" |
| register "gpi5_routing" = "1" |
| register "gpi6_routing" = "1" |
| register "gpi7_routing" = "1" |
| register "gpi8_routing" = "1" |
| register "gpi9_routing" = "1" |
| register "gpi10_routing" = "1" |
| register "gpi11_routing" = "1" |
| register "gpi12_routing" = "1" |
| register "gpi13_routing" = "2" |
| register "gpi14_routing" = "1" |
| register "gpi15_routing" = "1" |
| |
| register "gpe0_en" = "0" |
| |
| register "ide_legacy_combined" = "0x0" |
| register "ide_enable_primary" = "0x1" |
| register "ide_enable_secondary" = "0x0" |
| register "sata_ahci" = "0x0" |
| register "c3_latency" = "85" |
| |
| register "p_cnt_throttling_supported" = "0" |
| |
| device pci 1b.0 on # High Definition Audio |
| ioapic_irq 2 INTA 0x10 |
| end |
| device pci 1c.0 on end # PCIe |
| device pci 1c.1 on end # PCIe |
| #device pci 1c.2 off end # PCIe port 3 |
| #device pci 1c.3 off end # PCIe port 4 |
| #device pci 1c.4 off end # PCIe port 5 |
| #device pci 1c.5 off end # PCIe port 6 |
| device pci 1d.0 on # USB UHCI |
| ioapic_irq 2 INTA 0x10 |
| end |
| device pci 1d.1 on # USB UHCI |
| ioapic_irq 2 INTB 0x11 |
| end |
| device pci 1d.2 on # USB UHCI |
| ioapic_irq 2 INTC 0x12 |
| end |
| device pci 1d.3 on # USB UHCI |
| ioapic_irq 2 INTD 0x13 |
| end |
| device pci 1d.7 on # USB2 EHCI |
| ioapic_irq 2 INTA 0x10 |
| end |
| device pci 1e.0 on end # PCI bridge |
| |
| device pci 1f.0 on # LPC bridge |
| ioapic_irq 2 INTA 0x10 |
| chip superio/ite/it8718f # Super I/O |
| register "TMPIN1" = "THERMAL_RESISTOR" |
| register "TMPIN2" = "THERMAL_RESISTOR" |
| register "TMPIN3" = "THERMAL_DIODE" |
| register "ec.vin_mask" = "VIN_ALL" |
| |
| register "FAN1.mode" = "FAN_SMART_AUTOMATIC" |
| register "FAN1.smart.tmpin" = "3" |
| register "FAN1.smart.tmp_off" = "30" |
| register "FAN1.smart.tmp_start" = "35" |
| register "FAN1.smart.tmp_full" = "75" |
| register "FAN1.smart.tmp_delta" = "3" |
| register "FAN1.smart.smoothing" = "1" |
| register "FAN1.smart.pwm_start" = "0" |
| register "FAN1.smart.slope" = "10" |
| |
| register "FAN2.mode" = "FAN_SMART_AUTOMATIC" |
| register "FAN2.smart.tmpin" = "3" |
| register "FAN2.smart.tmp_off" = "30" |
| register "FAN2.smart.tmp_start" = "35" |
| register "FAN2.smart.tmp_full" = "75" |
| register "FAN2.smart.tmp_delta" = "3" |
| register "FAN2.smart.smoothing" = "1" |
| register "FAN2.smart.pwm_start" = "0" |
| register "FAN2.smart.slope" = "10" |
| |
| device pnp 2e.0 off end # Floppy |
| device pnp 2e.1 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.2 off end # COM2 |
| device pnp 2e.3 on # Parallel port |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| io 0x62 = 0 |
| drq 0x74 = 4 |
| irq 0xf0 = 0x08 |
| end |
| device pnp 2e.4 on # Environment controller |
| io 0x60 = 0x290 |
| irq 0x70 = 0x00 |
| io 0x62 = 0x000 |
| irq 0xf0 = 0x00 |
| irq 0xf1 = 0x00 |
| irq 0xf2 = 0x0a |
| irq 0xf3 = 0x00 |
| irq 0xf4 = 0x80 |
| irq 0xf5 = 0x20 |
| irq 0xf6 = 0x3e |
| end |
| device pnp 2e.5 on # Keyboard |
| io 0x60 = 0x60 |
| irq 0x70 = 1 |
| io 0x62 = 0x64 |
| irq 0xf0 = 0x48 |
| end |
| device pnp 2e.6 on # Mouse |
| irq 0x70 = 0 |
| irq 0x71 = 2 |
| irq 0xf0 = 0 |
| end |
| end |
| end |
| device pci 1f.1 on # IDE |
| ioapic_irq 2 INTB 0x11 |
| end |
| device pci 1f.2 on # SATA |
| ioapic_irq 2 INTC 0x12 |
| end |
| device pci 1f.3 on # SMBus |
| ioapic_irq 2 INTD 0x13 |
| end |
| end |
| end |
| end |