| /** @file |
| IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. |
| |
| This file contains all NetFn App commands, including: |
| IPM Device "Global" Commands (Chapter 20) |
| Firmware Firewall & Command Discovery Commands (Chapter 21) |
| BMC Watchdog Timer Commands (Chapter 27) |
| IPMI Messaging Support Commands (Chapter 22) |
| RMCP+ Support and Payload Commands (Chapter 24) |
| |
| See IPMI specification, Appendix G, Command Assignments |
| and Appendix H, Sub-function Assignments. |
| |
| Copyright (c) 1999 - 2018, Intel Corporation. All rights reserved.<BR> |
| SPDX-License-Identifier: BSD-2-Clause-Patent |
| **/ |
| |
| #ifndef _IPMI_NET_FN_APP_H_ |
| #define _IPMI_NET_FN_APP_H_ |
| |
| #pragma pack(1) |
| // |
| // Net function definition for App command |
| // |
| #define IPMI_NETFN_APP 0x06 |
| |
| // |
| // Below is Definitions for IPM Device "Global" Commands (Chapter 20) |
| // |
| |
| // |
| // Definitions for Get Device ID command |
| // |
| #define IPMI_APP_GET_DEVICE_ID 0x1 |
| |
| // |
| // Constants and Structure definitions for "Get Device ID" command to follow here |
| // |
| typedef union { |
| struct { |
| UINT8 DeviceRevision : 4; |
| UINT8 Reserved : 3; |
| UINT8 DeviceSdr : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_DEVICE_ID_DEVICE_REV; |
| |
| typedef union { |
| struct { |
| UINT8 MajorFirmwareRev : 7; |
| UINT8 UpdateMode : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_DEVICE_ID_FIRMWARE_REV_1; |
| |
| typedef union { |
| struct { |
| UINT8 SensorDeviceSupport : 1; |
| UINT8 SdrRepositorySupport : 1; |
| UINT8 SelDeviceSupport : 1; |
| UINT8 FruInventorySupport : 1; |
| UINT8 IpmbMessageReceiver : 1; |
| UINT8 IpmbMessageGenerator : 1; |
| UINT8 BridgeSupport : 1; |
| UINT8 ChassisSupport : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_DEVICE_ID_DEVICE_SUPPORT; |
| |
| typedef struct { |
| UINT8 CompletionCode; |
| UINT8 DeviceId; |
| IPMI_GET_DEVICE_ID_DEVICE_REV DeviceRevision; |
| IPMI_GET_DEVICE_ID_FIRMWARE_REV_1 FirmwareRev1; |
| UINT8 MinorFirmwareRev; |
| UINT8 SpecificationVersion; |
| IPMI_GET_DEVICE_ID_DEVICE_SUPPORT DeviceSupport; |
| UINT8 ManufacturerId[3]; |
| UINT16 ProductId; |
| UINT32 AuxFirmwareRevInfo; |
| } IPMI_GET_DEVICE_ID_RESPONSE; |
| |
| |
| // |
| // Definitions for Cold Reset command |
| // |
| #define IPMI_APP_COLD_RESET 0x2 |
| |
| // |
| // Constants and Structure definitions for "Cold Reset" command to follow here |
| // |
| |
| // |
| // Definitions for Warm Reset command |
| // |
| #define IPMI_APP_WARM_RESET 0x3 |
| |
| // |
| // Constants and Structure definitions for "Warm Reset" command to follow here |
| // |
| |
| // |
| // Definitions for Get Self Results command |
| // |
| #define IPMI_APP_GET_SELFTEST_RESULTS 0x4 |
| |
| // |
| // Constants and Structure definitions for "Get Self Test Results" command to follow here |
| // |
| typedef struct { |
| UINT8 CompletionCode; |
| UINT8 Result; |
| UINT8 Param; |
| } IPMI_SELF_TEST_RESULT_RESPONSE; |
| |
| #define IPMI_APP_SELFTEST_NO_ERROR 0x55 |
| #define IPMI_APP_SELFTEST_NOT_IMPLEMENTED 0x56 |
| #define IPMI_APP_SELFTEST_ERROR 0x57 |
| #define IPMI_APP_SELFTEST_FATAL_HW_ERROR 0x58 |
| #define IPMI_APP_SELFTEST_INACCESSIBLE_SEL 0x80 |
| #define IPMI_APP_SELFTEST_INACCESSIBLE_SDR 0x40 |
| #define IPMI_APP_SELFTEST_INACCESSIBLE_FRU 0x20 |
| #define IPMI_APP_SELFTEST_IPMB_SIGNAL_FAIL 0x10 |
| #define IPMI_APP_SELFTEST_SDR_REPOSITORY_EMPTY 0x08 |
| #define IPMI_APP_SELFTEST_FRU_CORRUPT 0x04 |
| #define IPMI_APP_SELFTEST_FW_BOOTBLOCK_CORRUPT 0x02 |
| #define IPMI_APP_SELFTEST_FW_CORRUPT 0x01 |
| |
| // |
| // Definitions for Manufacturing Test ON command |
| // |
| #define IPMI_APP_MANUFACTURING_TEST_ON 0x5 |
| |
| // |
| // Constants and Structure definitions for "Manufacturing Test ON" command to follow here |
| // |
| |
| // |
| // Definitions for Set ACPI Power State command |
| // |
| #define IPMI_APP_SET_ACPI_POWERSTATE 0x6 |
| |
| // |
| // Constants and Structure definitions for "Set ACPI Power State" command to follow here |
| // |
| |
| // |
| // Definitions for System Power State |
| // |
| // Working |
| #define IPMI_SYSTEM_POWER_STATE_S0_G0 0x0 |
| #define IPMI_SYSTEM_POWER_STATE_S1 0x1 |
| #define IPMI_SYSTEM_POWER_STATE_S2 0x2 |
| #define IPMI_SYSTEM_POWER_STATE_S3 0x3 |
| #define IPMI_SYSTEM_POWER_STATE_S4 0x4 |
| // Soft off |
| #define IPMI_SYSTEM_POWER_STATE_S5_G2 0x5 |
| // Sent when message source cannot differentiate between S4 and S5 |
| #define IPMI_SYSTEM_POWER_STATE_S4_S5 0x6 |
| // Mechanical off |
| #define IPMI_SYSTEM_POWER_STATE_G3 0x7 |
| // Sleeping - cannot differentiate between S1-S3 |
| #define IPMI_SYSTEM_POWER_STATE_SLEEPING 0x8 |
| // Sleeping - cannot differentiate between S1-S4 |
| #define IPMI_SYSTEM_POWER_STATE_G1_SLEEPING 0x9 |
| // S5 entered by override |
| #define IPMI_SYSTEM_POWER_STATE_OVERRIDE 0xA |
| #define IPMI_SYSTEM_POWER_STATE_LEGACY_ON 0x20 |
| #define IPMI_SYSTEM_POWER_STATE_LEGACY_OFF 0x21 |
| #define IPMI_SYSTEM_POWER_STATE_UNKNOWN 0x2A |
| #define IPMI_SYSTEM_POWER_STATE_NO_CHANGE 0x7F |
| |
| // |
| // Definitions for Device Power State |
| // |
| #define IPMI_DEVICE_POWER_STATE_D0 0x0 |
| #define IPMI_DEVICE_POWER_STATE_D1 0x1 |
| #define IPMI_DEVICE_POWER_STATE_D2 0x2 |
| #define IPMI_DEVICE_POWER_STATE_D3 0x3 |
| #define IPMI_DEVICE_POWER_STATE_UNKNOWN 0x2A |
| #define IPMI_DEVICE_POWER_STATE_NO_CHANGE 0x7F |
| |
| typedef union { |
| struct { |
| UINT8 PowerState : 7; |
| UINT8 StateChange : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_ACPI_POWER_STATE; |
| |
| typedef struct { |
| IPMI_ACPI_POWER_STATE SystemPowerState; |
| IPMI_ACPI_POWER_STATE DevicePowerState; |
| } IPMI_SET_ACPI_POWER_STATE_REQUEST; |
| |
| // |
| // Definitions for Get ACPI Power State command |
| // |
| #define IPMI_APP_GET_ACPI_POWERSTATE 0x7 |
| |
| // |
| // Constants and Structure definitions for "Get ACPI Power State" command to follow here |
| // |
| |
| // |
| // Definitions for Get Device GUID command |
| // |
| #define IPMI_APP_GET_DEVICE_GUID 0x8 |
| |
| // |
| // Constants and Structure definitions for "Get Device GUID" command to follow here |
| // |
| // |
| // Message structure definition for "Get Device Guid" IPMI command |
| // |
| typedef struct { |
| UINT8 CompletionCode; |
| UINT8 Guid[16]; |
| } IPMI_GET_DEVICE_GUID_RESPONSE; |
| |
| // |
| // Below is Definitions for BMC Watchdog Timer Commands (Chapter 27) |
| // |
| |
| // |
| // Definitions for Reset WatchDog Timer command |
| // |
| #define IPMI_APP_RESET_WATCHDOG_TIMER 0x22 |
| |
| // |
| // Definitions for Set WatchDog Timer command |
| // |
| #define IPMI_APP_SET_WATCHDOG_TIMER 0x24 |
| |
| // |
| // Constants and Structure definitions for "Set WatchDog Timer" command to follow here |
| // |
| |
| // |
| // Definitions for watchdog timer use |
| // |
| #define IPMI_WATCHDOG_TIMER_BIOS_FRB2 0x1 |
| #define IPMI_WATCHDOG_TIMER_BIOS_POST 0x2 |
| #define IPMI_WATCHDOG_TIMER_OS_LOADER 0x3 |
| #define IPMI_WATCHDOG_TIMER_SMS 0x4 |
| #define IPMI_WATCHDOG_TIMER_OEM 0x5 |
| |
| // |
| // Structure definition for timer Use |
| // |
| typedef union { |
| struct { |
| UINT8 TimerUse : 3; |
| UINT8 Reserved : 3; |
| UINT8 TimerRunning : 1; |
| UINT8 TimerUseExpirationFlagLog : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_WATCHDOG_TIMER_USE; |
| |
| // |
| // Definitions for watchdog timeout action |
| // |
| #define IPMI_WATCHDOG_TIMER_ACTION_NO_ACTION 0x0 |
| #define IPMI_WATCHDOG_TIMER_ACTION_HARD_RESET 0x1 |
| #define IPMI_WATCHDOG_TIMER_ACTION_POWER_DONW 0x2 |
| #define IPMI_WATCHDOG_TIMER_ACTION_POWER_CYCLE 0x3 |
| |
| // |
| // Definitions for watchdog pre-timeout interrupt |
| // |
| #define IPMI_WATCHDOG_PRE_TIMEOUT_INTERRUPT_NONE 0x0 |
| #define IPMI_WATCHDOG_PRE_TIMEOUT_INTERRUPT_SMI 0x1 |
| #define IPMI_WATCHDOG_PRE_TIMEOUT_INTERRUPT_NMI 0x2 |
| #define IPMI_WATCHDOG_PRE_TIMEOUT_INTERRUPT_MESSAGING 0x3 |
| |
| // |
| // Structure definitions for Timer Actions |
| // |
| typedef union { |
| struct { |
| UINT8 TimeoutAction : 3; |
| UINT8 Reserved1 : 1; |
| UINT8 PreTimeoutInterrupt : 3; |
| UINT8 Reserved2 : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_WATCHDOG_TIMER_ACTIONS; |
| |
| // |
| // Bit definitions for Timer use expiration flags |
| // |
| #define IPMI_WATCHDOG_TIMER_EXPIRATION_FLAG_BIOS_FRB2 BIT1 |
| #define IPMI_WATCHDOG_TIMER_EXPIRATION_FLAG_BIOS_POST BIT2 |
| #define IPMI_WATCHDOG_TIMER_EXPIRATION_FLAG_OS_LOAD BIT3 |
| #define IPMI_WATCHDOG_TIMER_EXPIRATION_FLAG_SMS_OS BIT4 |
| #define IPMI_WATCHDOG_TIMER_EXPIRATION_FLAG_OEM BIT5 |
| |
| typedef struct { |
| IPMI_WATCHDOG_TIMER_USE TimerUse; |
| IPMI_WATCHDOG_TIMER_ACTIONS TimerActions; |
| UINT8 PretimeoutInterval; |
| UINT8 TimerUseExpirationFlagsClear; |
| UINT16 InitialCountdownValue; |
| } IPMI_SET_WATCHDOG_TIMER_REQUEST; |
| |
| // |
| // Definitions for Get WatchDog Timer command |
| // |
| #define IPMI_APP_GET_WATCHDOG_TIMER 0x25 |
| |
| // |
| // Constants and Structure definitions for "Get WatchDog Timer" command to follow here |
| // |
| typedef struct { |
| UINT8 CompletionCode; |
| IPMI_WATCHDOG_TIMER_USE TimerUse; |
| IPMI_WATCHDOG_TIMER_ACTIONS TimerActions; |
| UINT8 PretimeoutInterval; |
| UINT8 TimerUseExpirationFlagsClear; |
| UINT16 InitialCountdownValue; |
| UINT16 PresentCountdownValue; |
| } IPMI_GET_WATCHDOG_TIMER_RESPONSE; |
| |
| // |
| // Below is Definitions for IPMI Messaging Support Commands (Chapter 22) |
| // |
| |
| // |
| // Definitions for Set BMC Global Enables command |
| // |
| #define IPMI_APP_SET_BMC_GLOBAL_ENABLES 0x2E |
| |
| // |
| // Constants and Structure definitions for "Set BMC Global Enables " command to follow here |
| // |
| typedef union { |
| struct { |
| UINT8 ReceiveMessageQueueInterrupt : 1; |
| UINT8 EventMessageBufferFullInterrupt : 1; |
| UINT8 EventMessageBuffer : 1; |
| UINT8 SystemEventLogging : 1; |
| UINT8 Reserved : 1; |
| UINT8 Oem0Enable : 1; |
| UINT8 Oem1Enable : 1; |
| UINT8 Oem2Enable : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_BMC_GLOBAL_ENABLES; |
| |
| typedef struct { |
| IPMI_BMC_GLOBAL_ENABLES SetEnables; |
| } IPMI_SET_BMC_GLOBAL_ENABLES_REQUEST; |
| |
| // |
| // Definitions for Get BMC Global Enables command |
| // |
| #define IPMI_APP_GET_BMC_GLOBAL_ENABLES 0x2F |
| |
| // |
| // Constants and Structure definitions for "Get BMC Global Enables " command to follow here |
| // |
| typedef struct { |
| UINT8 CompletionCode; |
| IPMI_BMC_GLOBAL_ENABLES GetEnables; |
| } IPMI_GET_BMC_GLOBAL_ENABLES_RESPONSE; |
| |
| // |
| // Definitions for Clear Message Flags command |
| // |
| #define IPMI_APP_CLEAR_MESSAGE_FLAGS 0x30 |
| |
| // |
| // Constants and Structure definitions for "Clear Message Flags" command to follow here |
| // |
| typedef union { |
| struct { |
| UINT8 ReceiveMessageQueue : 1; |
| UINT8 EventMessageBuffer : 1; |
| UINT8 Reserved1 : 1; |
| UINT8 WatchdogPerTimeoutInterrupt : 1; |
| UINT8 Reserved2 : 1; |
| UINT8 Oem0 : 1; |
| UINT8 Oem1 : 1; |
| UINT8 Oem2 : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_MESSAGE_FLAGS; |
| |
| typedef struct { |
| IPMI_MESSAGE_FLAGS ClearFlags; |
| } IPMI_CLEAR_MESSAGE_FLAGS_REQUEST; |
| |
| // |
| // Definitions for Get Message Flags command |
| // |
| #define IPMI_APP_GET_MESSAGE_FLAGS 0x31 |
| |
| // |
| // Constants and Structure definitions for "Get Message Flags" command to follow here |
| // |
| typedef struct { |
| UINT8 CompletionCode; |
| IPMI_MESSAGE_FLAGS GetFlags; |
| } IPMI_GET_MESSAGE_FLAGS_RESPONSE; |
| |
| // |
| // Definitions for Enable Message Channel Receive command |
| // |
| #define IPMI_APP_ENABLE_MESSAGE_CHANNEL_RECEIVE 0x32 |
| |
| // |
| // Constants and Structure definitions for "Enable Message Channel Receive" command to follow here |
| // |
| |
| // |
| // Definitions for Get Message command |
| // |
| #define IPMI_APP_GET_MESSAGE 0x33 |
| |
| // |
| // Constants and Structure definitions for "Get Message" command to follow here |
| // |
| typedef union { |
| struct { |
| UINT8 ChannelNumber : 4; |
| UINT8 InferredPrivilegeLevel : 4; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_MESSAGE_CHANNEL_NUMBER; |
| |
| typedef struct { |
| UINT8 CompletionCode; |
| IPMI_GET_MESSAGE_CHANNEL_NUMBER ChannelNumber; |
| UINT8 MessageData[0]; |
| } IPMI_GET_MESSAGE_RESPONSE; |
| |
| // |
| // Definitions for Send Message command |
| // |
| #define IPMI_APP_SEND_MESSAGE 0x34 |
| |
| // |
| // Constants and Structure definitions for "Send Message" command to follow here |
| // |
| typedef union { |
| struct { |
| UINT8 ChannelNumber : 4; |
| UINT8 Authentication : 1; |
| UINT8 Encryption : 1; |
| UINT8 Tracking : 2; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_SEND_MESSAGE_CHANNEL_NUMBER; |
| |
| typedef struct { |
| UINT8 CompletionCode; |
| IPMI_SEND_MESSAGE_CHANNEL_NUMBER ChannelNumber; |
| UINT8 MessageData[0]; |
| } IPMI_SEND_MESSAGE_REQUEST; |
| |
| typedef struct { |
| UINT8 CompletionCode; |
| UINT8 ResponseData[0]; |
| } IPMI_SEND_MESSAGE_RESPONSE; |
| |
| // |
| // Definitions for Read Event Message Buffer command |
| // |
| #define IPMI_APP_READ_EVENT_MSG_BUFFER 0x35 |
| |
| // |
| // Constants and Structure definitions for "Read Event Message Buffer" command to follow here |
| // |
| |
| // |
| // Definitions for Get BT Interface Capabilities command |
| // |
| #define IPMI_APP_GET_BT_INTERFACE_CAPABILITY 0x36 |
| |
| // |
| // Constants and Structure definitions for "Get BT Interface Capabilities" command to follow here |
| // |
| |
| // |
| // Definitions for Get System GUID command |
| // |
| #define IPMI_APP_GET_SYSTEM_GUID 0x37 |
| |
| // |
| // Constants and Structure definitions for "Get System GUID" command to follow here |
| // |
| |
| // |
| // Definitions for Get Channel Authentication Capabilities command |
| // |
| #define IPMI_APP_GET_CHANNEL_AUTHENTICATION_CAPABILITIES 0x38 |
| |
| // |
| // Constants and Structure definitions for "Get Channel Authentication Capabilities" command to follow here |
| // |
| |
| // |
| // Definitions for Get Session Challenge command |
| // |
| #define IPMI_APP_GET_SESSION_CHALLENGE 0x39 |
| |
| // |
| // Constants and Structure definitions for "Get Session Challenge" command to follow here |
| // |
| |
| // |
| // Definitions for Activate Session command |
| // |
| #define IPMI_APP_ACTIVATE_SESSION 0x3A |
| |
| // |
| // Constants and Structure definitions for "Activate Session" command to follow here |
| // |
| |
| // |
| // Definitions for Set Session Privelege Level command |
| // |
| #define IPMI_APP_SET_SESSION_PRIVELEGE_LEVEL 0x3B |
| |
| // |
| // Constants and Structure definitions for "Set Session Privelege Level" command to follow here |
| // |
| |
| // |
| // Definitions for Close Session command |
| // |
| #define IPMI_APP_CLOSE_SESSION 0x3C |
| |
| // |
| // Constants and Structure definitions for "Close Session" command to follow here |
| // |
| |
| // |
| // Definitions for Get Session Info command |
| // |
| #define IPMI_APP_GET_SESSION_INFO 0x3D |
| |
| // |
| // Constants and Structure definitions for "Get Session Info" command to follow here |
| // |
| |
| // |
| // Definitions for Get Auth Code command |
| // |
| #define IPMI_APP_GET_AUTHCODE 0x3F |
| |
| // |
| // Constants and Structure definitions for "Get AuthCode" command to follow here |
| // |
| |
| // |
| // Definitions for Set Channel Access command |
| // |
| #define IPMI_APP_SET_CHANNEL_ACCESS 0x40 |
| |
| // |
| // Constants and Structure definitions for "Set Channel Access" command to follow here |
| // |
| |
| // |
| // Definitions for Get Channel Access command |
| // |
| #define IPMI_APP_GET_CHANNEL_ACCESS 0x41 |
| |
| // |
| // Constants and Structure definitions for "Get Channel Access" command to follow here |
| // |
| |
| // |
| // Definitions for channel access memory type in Get Channel Access command request |
| // |
| #define IPMI_CHANNEL_ACCESS_MEMORY_TYPE_NON_VOLATILE 0x1 |
| #define IPMI_CHANNEL_ACCESS_MEMORY_TYPE_PRESENT_VOLATILE_SETTING 0x2 |
| |
| // |
| // Definitions for channel access modes in Get Channel Access command response |
| // |
| #define IPMI_CHANNEL_ACCESS_MODES_DISABLED 0x0 |
| #define IPMI_CHANNEL_ACCESS_MODES_PRE_BOOT_ONLY 0x1 |
| #define IPMI_CHANNEL_ACCESS_MODES_ALWAYS_AVAILABLE 0x2 |
| #define IPMI_CHANNEL_ACCESS_MODES_SHARED 0x3 |
| |
| typedef union { |
| struct { |
| UINT8 ChannelNo : 4; |
| UINT8 Reserved : 4; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_CHANNEL_ACCESS_CHANNEL_NUMBER; |
| |
| typedef union { |
| struct { |
| UINT8 Reserved : 6; |
| UINT8 MemoryType : 2; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_CHANNEL_ACCESS_TYPE; |
| |
| typedef struct { |
| IPMI_GET_CHANNEL_ACCESS_CHANNEL_NUMBER ChannelNumber; |
| IPMI_GET_CHANNEL_ACCESS_TYPE AccessType; |
| } IPMI_GET_CHANNEL_ACCESS_REQUEST; |
| |
| typedef union { |
| struct { |
| UINT8 AccessMode : 3; |
| UINT8 UserLevelAuthEnabled : 1; |
| UINT8 MessageAuthEnable : 1; |
| UINT8 Alert : 1; |
| UINT8 Reserved : 2; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_CHANNEL_ACCESS_CHANNEL_ACCESS; |
| |
| typedef union { |
| struct { |
| UINT8 ChannelPriviledgeLimit : 4; |
| UINT8 Reserved : 4; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_CHANNEL_ACCESS_PRIVILEGE_LIMIT; |
| |
| typedef struct { |
| UINT8 CompletionCode; |
| IPMI_GET_CHANNEL_ACCESS_CHANNEL_ACCESS ChannelAccess; |
| IPMI_GET_CHANNEL_ACCESS_PRIVILEGE_LIMIT PrivilegeLimit; |
| } IPMI_GET_CHANNEL_ACCESS_RESPONSE; |
| |
| // |
| // Definitions for Get Channel Info command |
| // |
| #define IPMI_APP_GET_CHANNEL_INFO 0x42 |
| |
| // |
| // Constants and Structure definitions for "Get Channel Info" command to follow here |
| // |
| |
| // |
| // Definitions for channel media type |
| // |
| // IPMB (I2C) |
| #define IPMI_CHANNEL_MEDIA_TYPE_IPMB 0x1 |
| // ICMB v1.0 |
| #define IPMI_CHANNEL_MEDIA_TYPE_ICMB_1_0 0x2 |
| // ICMB v0.9 |
| #define IPMI_CHANNEL_MEDIA_TYPE_ICMB_0_9 0x3 |
| // 802.3 LAN |
| #define IPMI_CHANNEL_MEDIA_TYPE_802_3_LAN 0x4 |
| // Asynch. Serial/Modem (RS-232) |
| #define IPMI_CHANNEL_MEDIA_TYPE_RS_232 0x5 |
| // Other LAN |
| #define IPMI_CHANNEL_MEDIA_TYPE_OTHER_LAN 0x6 |
| // PCI SMBus |
| #define IPMI_CHANNEL_MEDIA_TYPE_PCI_SM_BUS 0x7 |
| // SMBus v1.0/1.1 |
| #define IPMI_CHANNEL_MEDIA_TYPE_SM_BUS_V1 0x8 |
| // SMBus v2.0 |
| #define IPMI_CHANNEL_MEDIA_TYPE_SM_BUS_V2 0x9 |
| // USB 1.x |
| #define IPMI_CHANNEL_MEDIA_TYPE_USB1 0xA |
| // USB 2.x |
| #define IPMI_CHANNEL_MEDIA_TYPE_USB2 0xB |
| // System Interface (KCS, SMIC, or BT) |
| #define IPMI_CHANNEL_MEDIA_TYPE_SYSTEM_INTERFACE 0xC |
| // OEM |
| #define IPMI_CHANNEL_MEDIA_TYPE_OEM_START 0x60 |
| #define IPMI_CHANNEL_MEDIA_TYPE_OEM_END 0x7F |
| |
| typedef union { |
| struct { |
| UINT8 ChannelNo : 4; |
| UINT8 Reserved : 4; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_CHANNEL_INFO_CHANNEL_NUMBER; |
| |
| typedef union { |
| struct { |
| UINT8 ChannelMediumType : 7; |
| UINT8 Reserved : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_CHANNEL_INFO_MEDIUM_TYPE; |
| |
| typedef union { |
| struct { |
| UINT8 ChannelProtocolType : 5; |
| UINT8 Reserved : 3; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_CHANNEL_INFO_PROTOCOL_TYPE; |
| |
| typedef union { |
| struct { |
| UINT8 ActiveSessionCount : 6; |
| UINT8 SessionSupport : 2; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_CHANNEL_INFO_SESSION_SUPPORT; |
| |
| typedef struct { |
| UINT8 CompletionCode; |
| IPMI_CHANNEL_INFO_CHANNEL_NUMBER ChannelNumber; |
| IPMI_CHANNEL_INFO_MEDIUM_TYPE MediumType; |
| IPMI_CHANNEL_INFO_PROTOCOL_TYPE ProtocolType; |
| IPMI_CHANNEL_INFO_SESSION_SUPPORT SessionSupport; |
| UINT8 VendorId[3]; |
| UINT16 AuxChannelInfo; |
| } IPMI_GET_CHANNEL_INFO_RESPONSE; |
| |
| // |
| // Definitions for Get Channel Info command |
| // |
| #define IPMI_APP_GET_CHANNEL_INFO 0x42 |
| |
| // |
| // Constants and Structure definitions for "Get Channel Info" command to follow here |
| // |
| |
| // |
| // Definitions for Set User Access command |
| // |
| #define IPMI_APP_SET_USER_ACCESS 0x43 |
| |
| // |
| // Constants and Structure definitions for "Set User Access" command to follow here |
| // |
| |
| // |
| // Definitions for Get User Access command |
| // |
| #define IPMI_APP_GET_USER_ACCESS 0x44 |
| |
| // |
| // Constants and Structure definitions for "Get User Access" command to follow here |
| // |
| typedef union { |
| struct { |
| UINT8 ChannelNo : 4; |
| UINT8 Reserved : 4; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_USER_ACCESS_CHANNEL_NUMBER; |
| |
| typedef union { |
| struct { |
| UINT8 UserId : 6; |
| UINT8 Reserved : 2; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_USER_ID; |
| |
| typedef struct { |
| IPMI_GET_USER_ACCESS_CHANNEL_NUMBER ChannelNumber; |
| IPMI_USER_ID UserId; |
| } IPMI_GET_USER_ACCESS_REQUEST; |
| |
| typedef union { |
| struct { |
| UINT8 MaxUserId : 6; |
| UINT8 Reserved : 2; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_USER_ACCESS_MAX_USER_ID; |
| |
| typedef union { |
| struct { |
| UINT8 CurrentUserId : 6; |
| UINT8 UserIdEnableStatus : 2; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_USER_ACCESS_CURRENT_USER; |
| |
| typedef union { |
| struct { |
| UINT8 FixedUserId : 6; |
| UINT8 Reserved : 2; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_USER_ACCESS_FIXED_NAME_USER; |
| |
| typedef union { |
| struct { |
| UINT8 UserPrivilegeLimit : 4; |
| UINT8 EnableIpmiMessaging : 1; |
| UINT8 EnableUserLinkAuthetication : 1; |
| UINT8 UserAccessAvailable : 1; |
| UINT8 Reserved : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_GET_USER_ACCESS_CHANNEL_ACCESS; |
| |
| typedef struct { |
| UINT8 CompletionCode; |
| IPMI_GET_USER_ACCESS_MAX_USER_ID MaxUserId; |
| IPMI_GET_USER_ACCESS_CURRENT_USER CurrentUser; |
| IPMI_GET_USER_ACCESS_FIXED_NAME_USER FixedNameUser; |
| IPMI_GET_USER_ACCESS_CHANNEL_ACCESS ChannelAccess; |
| } IPMI_GET_USER_ACCESS_RESPONSE; |
| |
| // |
| // Definitions for Set User Name command |
| // |
| #define IPMI_APP_SET_USER_NAME 0x45 |
| |
| // |
| // Constants and Structure definitions for "Set User Name" command to follow here |
| // |
| typedef struct { |
| IPMI_USER_ID UserId; |
| UINT8 UserName[16]; |
| } IPMI_SET_USER_NAME_REQUEST; |
| |
| // |
| // Definitions for Get User Name command |
| // |
| #define IPMI_APP_GET_USER_NAME 0x46 |
| |
| // |
| // Constants and Structure definitions for "Get User Name" command to follow here |
| // |
| typedef struct { |
| IPMI_USER_ID UserId; |
| } IPMI_GET_USER_NAME_REQUEST; |
| |
| typedef struct { |
| UINT8 CompletionCode; |
| UINT8 UserName[16]; |
| } IPMI_GET_USER_NAME_RESPONSE; |
| |
| // |
| // Definitions for Set User Password command |
| // |
| #define IPMI_APP_SET_USER_PASSWORD 0x47 |
| |
| // |
| // Constants and Structure definitions for "Set User Password" command to follow here |
| // |
| |
| // |
| // Definitions for Set User password command operation type |
| // |
| #define IPMI_SET_USER_PASSWORD_OPERATION_TYPE_DISABLE_USER 0x0 |
| #define IPMI_SET_USER_PASSWORD_OPERATION_TYPE_ENABLE_USER 0x1 |
| #define IPMI_SET_USER_PASSWORD_OPERATION_TYPE_SET_PASSWORD 0x2 |
| #define IPMI_SET_USER_PASSWORD_OPERATION_TYPE_TEST_PASSWORD 0x3 |
| |
| // |
| // Definitions for Set user password command password size |
| // |
| #define IPMI_SET_USER_PASSWORD_PASSWORD_SIZE_16 0x0 |
| #define IPMI_SET_USER_PASSWORD_PASSWORD_SIZE_20 0x1 |
| |
| typedef union { |
| struct { |
| UINT8 UserId : 6; |
| UINT8 Reserved : 1; |
| UINT8 PasswordSize : 1; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_SET_USER_PASSWORD_USER_ID; |
| |
| typedef union { |
| struct { |
| UINT8 Operation : 2; |
| UINT8 Reserved : 6; |
| } Bits; |
| UINT8 Uint8; |
| } IPMI_SET_USER_PASSWORD_OPERATION; |
| |
| typedef struct { |
| IPMI_SET_USER_PASSWORD_USER_ID UserId; |
| IPMI_SET_USER_PASSWORD_OPERATION Operation; |
| UINT8 PasswordData[0]; // 16 or 20 bytes, depending on the 'PasswordSize' field |
| } IPMI_SET_USER_PASSWORD_REQUEST; |
| |
| // |
| // Below is Definitions for RMCP+ Support and Payload Commands (Chapter 24) |
| // |
| |
| // |
| // Definitions for Activate Payload command |
| // |
| #define IPMI_APP_ACTIVATE_PAYLOAD 0x48 |
| |
| // |
| // Constants and Structure definitions for "Activate Payload" command to follow here |
| // |
| |
| // |
| // Definitions for De-Activate Payload command |
| // |
| #define IPMI_APP_DEACTIVATE_PAYLOAD 0x49 |
| |
| // |
| // Constants and Structure definitions for "DeActivate Payload" command to follow here |
| // |
| |
| // |
| // Definitions for Get Payload activation Status command |
| // |
| #define IPMI_APP_GET_PAYLOAD_ACTIVATION_STATUS 0x4a |
| |
| // |
| // Constants and Structure definitions for "Get Payload activation Status" command to follow here |
| // |
| |
| // |
| // Definitions for Get Payload Instance Info command |
| // |
| #define IPMI_APP_GET_PAYLOAD_INSTANCE_INFO 0x4b |
| |
| // |
| // Constants and Structure definitions for "Get Payload Instance Info" command to follow here |
| // |
| |
| // |
| // Definitions for Set User Payload Access command |
| // |
| #define IPMI_APP_SET_USER_PAYLOAD_ACCESS 0x4C |
| |
| // |
| // Constants and Structure definitions for "Set User Payload Access" command to follow here |
| // |
| |
| // |
| // Definitions for Get User Payload Access command |
| // |
| #define IPMI_APP_GET_USER_PAYLOAD_ACCESS 0x4D |
| |
| // |
| // Constants and Structure definitions for "Get User Payload Access" command to follow here |
| // |
| |
| // |
| // Definitions for Get Channel Payload Support command |
| // |
| #define IPMI_APP_GET_CHANNEL_PAYLOAD_SUPPORT 0x4E |
| |
| // |
| // Constants and Structure definitions for "Get Channel Payload Support" command to follow here |
| // |
| |
| // |
| // Definitions for Get Channel Payload Version command |
| // |
| #define IPMI_APP_GET_CHANNEL_PAYLOAD_VERSION 0x4F |
| |
| // |
| // Constants and Structure definitions for "Get Channel Payload Version" command to follow here |
| // |
| |
| // |
| // Definitions for Get Channel OEM Payload Info command |
| // |
| #define IPMI_APP_GET_CHANNEL_OEM_PAYLOAD_INFO 0x50 |
| |
| // |
| // Constants and Structure definitions for "Get Channel OEM Payload Info" command to follow here |
| // |
| |
| // |
| // Definitions for Master Write-Read command |
| // |
| #define IPMI_APP_MASTER_WRITE_READ 0x52 |
| |
| // |
| // Constants and Structure definitions for "Master Write Read" command to follow here |
| // |
| |
| // |
| // Definitions for Get Channel Cipher Suites command |
| // |
| #define IPMI_APP_GET_CHANNEL_CIPHER_SUITES 0x54 |
| |
| // |
| // Constants and Structure definitions for "Get Channel Cipher Suites" command to follow here |
| // |
| |
| // |
| // Below is Definitions for RMCP+ Support and Payload Commands (Chapter 24, Section 3) |
| // |
| |
| // |
| // Definitions for Suspend-Resume Payload Encryption command |
| // |
| #define IPMI_APP_SUSPEND_RESUME_PAYLOAD_ENCRYPTION 0x55 |
| |
| // |
| // Constants and Structure definitions for "Suspend-Resume Payload Encryption" command to follow here |
| // |
| |
| // |
| // Below is Definitions for IPMI Messaging Support Commands (Chapter 22, Section 25 and 9) |
| // |
| |
| // |
| // Definitions for Set Channel Security Keys command |
| // |
| #define IPMI_APP_SET_CHANNEL_SECURITY_KEYS 0x56 |
| |
| // |
| // Constants and Structure definitions for "Set Channel Security Keys" command to follow here |
| // |
| |
| // |
| // Definitions for Get System Interface Capabilities command |
| // |
| #define IPMI_APP_GET_SYSTEM_INTERFACE_CAPABILITIES 0x57 |
| |
| // |
| // Constants and Structure definitions for "Get System Interface Capabilities" command to follow here |
| // |
| |
| // |
| // Definitions for Get System Interface Capabilities command SSIF transaction support |
| // |
| #define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_SSIF_TRANSACTION_SUPPORT_SINGLE_PARTITION_RW 0x0 |
| #define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_SSIF_TRANSACTION_SUPPORT_MULTI_PARTITION_RW 0x1 |
| #define IPMI_GET_SYSTEM_INTERFACE_CAPABILITIES_SSIF_TRANSACTION_SUPPORT_MULTI_PARTITION_RW_WITH_MIDDLE 0x2 |
| |
| #pragma pack() |
| #endif |