| /** @file |
| Provides library functions for each of the UEFI Runtime Services. |
| Only available to DXE and UEFI module types. |
| |
| Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR> |
| This program and the accompanying materials are licensed and made available under |
| the terms and conditions of the BSD License that accompanies this distribution. |
| The full text of the license may be found at |
| http://opensource.org/licenses/bsd-license.php. |
| |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. |
| **/ |
| |
| #ifndef __UEFI_RUNTIME_LIB__ |
| #define __UEFI_RUNTIME_LIB__ |
| |
| /** |
| This function allows the caller to determine if UEFI ExitBootServices() has been called. |
| |
| This function returns TRUE after all the EVT_SIGNAL_EXIT_BOOT_SERVICES functions have |
| executed as a result of the OS calling ExitBootServices(). Prior to this time FALSE |
| is returned. This function is used by runtime code to decide it is legal to access |
| services that go away after ExitBootServices(). |
| |
| @retval TRUE The system has finished executing the EVT_SIGNAL_EXIT_BOOT_SERVICES event. |
| @retval FALSE The system has not finished executing the EVT_SIGNAL_EXIT_BOOT_SERVICES event. |
| |
| **/ |
| BOOLEAN |
| EFIAPI |
| EfiAtRuntime ( |
| VOID |
| ); |
| |
| /** |
| This function allows the caller to determine if UEFI SetVirtualAddressMap() has been called. |
| |
| This function returns TRUE after all the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE functions have |
| executed as a result of the OS calling SetVirtualAddressMap(). Prior to this time FALSE |
| is returned. This function is used by runtime code to decide it is legal to access services |
| that go away after SetVirtualAddressMap(). |
| |
| @retval TRUE The system has finished executing the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event. |
| @retval FALSE The system has not finished executing the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event. |
| |
| **/ |
| BOOLEAN |
| EFIAPI |
| EfiGoneVirtual ( |
| VOID |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service GetTime(). |
| |
| The GetTime() function returns a time that was valid sometime during the call to the function. |
| While the returned EFI_TIME structure contains TimeZone and Daylight savings time information, |
| the actual clock does not maintain these values. The current time zone and daylight saving time |
| information returned by GetTime() are the values that were last set via SetTime(). |
| The GetTime() function should take approximately the same amount of time to read the time each |
| time it is called. All reported device capabilities are to be rounded up. |
| During runtime, if a PC-AT CMOS device is present in the platform, the caller must synchronize |
| access to the device before calling GetTime(). |
| |
| @param Time A pointer to storage to receive a snapshot of the current time. |
| @param Capabilities An optional pointer to a buffer to receive the real time clock device's |
| capabilities. |
| |
| @retval EFI_SUCCESS The operation completed successfully. |
| @retval EFI_INVALID_PARAMETER Time is NULL. |
| @retval EFI_DEVICE_ERROR The time could not be retrieved due to a hardware error. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiGetTime ( |
| OUT EFI_TIME *Time, |
| OUT EFI_TIME_CAPABILITIES *Capabilities OPTIONAL |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service SetTime(). |
| |
| The SetTime() function sets the real time clock device to the supplied time, and records the |
| current time zone and daylight savings time information. The SetTime() function is not allowed |
| to loop based on the current time. For example, if the device does not support a hardware reset |
| for the sub-resolution time, the code is not to implement the feature by waiting for the time to |
| wrap. |
| During runtime, if a PC-AT CMOS device is present in the platform, the caller must synchronize |
| access to the device before calling SetTime(). |
| |
| @param Time A pointer to the current time. Type EFI_TIME is defined in the GetTime() |
| function description. Full error checking is performed on the different |
| fields of the EFI_TIME structure (refer to the EFI_TIME definition in the |
| GetTime() function description for full details), and EFI_INVALID_PARAMETER |
| is returned if any field is out of range. |
| |
| @retval EFI_SUCCESS The operation completed successfully. |
| @retval EFI_INVALID_PARAMETER A time field is out of range. |
| @retval EFI_DEVICE_ERROR The time could not be set due to a hardware error. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiSetTime ( |
| IN EFI_TIME *Time |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service GetWakeupTime(). |
| |
| The alarm clock time may be rounded from the set alarm clock time to be within the resolution |
| of the alarm clock device. The resolution of the alarm clock device is defined to be one second. |
| During runtime, if a PC-AT CMOS device is present in the platform the caller must synchronize |
| access to the device before calling GetWakeupTime(). |
| |
| @param Enabled Indicates if the alarm is currently enabled or disabled. |
| @param Pending Indicates if the alarm signal is pending and requires acknowledgement. |
| @param Time The current alarm setting. Type EFI_TIME is defined in the GetTime() |
| function description. |
| |
| @retval EFI_SUCCESS The alarm settings were returned. |
| @retval EFI_INVALID_PARAMETER Enabled is NULL. |
| @retval EFI_INVALID_PARAMETER Pending is NULL. |
| @retval EFI_INVALID_PARAMETER Time is NULL. |
| @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a hardware error. |
| @retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiGetWakeupTime ( |
| OUT BOOLEAN *Enabled, |
| OUT BOOLEAN *Pending, |
| OUT EFI_TIME *Time |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service SetWakeupTime() |
| |
| Setting a system wakeup alarm causes the system to wake up or power on at the set time. |
| When the alarm fires, the alarm signal is latched until it is acknowledged by calling SetWakeupTime() |
| to disable the alarm. If the alarm fires before the system is put into a sleeping or off state, |
| since the alarm signal is latched the system will immediately wake up. If the alarm fires while |
| the system is off and there is insufficient power to power on the system, the system is powered |
| on when power is restored. |
| |
| @param Enable Enable or disable the wakeup alarm. |
| @param Time If Enable is TRUE, the time to set the wakeup alarm for. Type EFI_TIME |
| is defined in the GetTime() function description. If Enable is FALSE, |
| then this parameter is optional, and may be NULL. |
| |
| @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was enabled. |
| If Enable is FALSE, then the wakeup alarm was disabled. |
| @retval EFI_INVALID_PARAMETER A time field is out of range. |
| @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a hardware error. |
| @retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiSetWakeupTime ( |
| IN BOOLEAN Enable, |
| IN EFI_TIME *Time OPTIONAL |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service GetVariable(). |
| |
| Each vendor may create and manage its own variables without the risk of name conflicts by |
| using a unique VendorGuid. When a variable is set, its Attributes are supplied to indicate |
| how the data variable should be stored and maintained by the system. The attributes affect |
| when the variable may be accessed and volatility of the data. Any attempts to access a variable |
| that does not have the attribute set for runtime access will yield the EFI_NOT_FOUND error. |
| If the Data buffer is too small to hold the contents of the variable, the error EFI_BUFFER_TOO_SMALL |
| is returned and DataSize is set to the required buffer size to obtain the data. |
| |
| @param VariableName the name of the vendor's variable, it's a Null-Terminated Unicode String |
| @param VendorGuid Unify identifier for vendor. |
| @param Attributes Point to memory location to return the attributes of variable. If the point |
| is NULL, the parameter would be ignored. |
| @param DataSize As input, point to the maximum size of return Data-Buffer. |
| As output, point to the actual size of the returned Data-Buffer. |
| @param Data Point to return Data-Buffer. |
| |
| @retval EFI_SUCCESS The function completed successfully. |
| @retval EFI_NOT_FOUND The variable was not found. |
| @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has |
| been updated with the size needed to complete the request. |
| @retval EFI_INVALID_PARAMETER VariableName is NULL. |
| @retval EFI_INVALID_PARAMETER VendorGuid is NULL. |
| @retval EFI_INVALID_PARAMETER DataSize is NULL. |
| @retval EFI_INVALID_PARAMETER The DataSize is not too small and Data is NULL. |
| @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error. |
| @retval EFI_SECURITY_VIOLATION The variable could not be retrieved due to an authentication failure. |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiGetVariable ( |
| IN CHAR16 *VariableName, |
| IN EFI_GUID *VendorGuid, |
| OUT UINT32 *Attributes OPTIONAL, |
| IN OUT UINTN *DataSize, |
| OUT VOID *Data |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service GetNextVariableName(). |
| |
| GetNextVariableName() is called multiple times to retrieve the VariableName and VendorGuid of |
| all variables currently available in the system. On each call to GetNextVariableName() the |
| previous results are passed into the interface, and on output the interface returns the next |
| variable name data. When the entire variable list has been returned, the error EFI_NOT_FOUND |
| is returned. |
| |
| @param VariableNameSize As input, point to maximum size of variable name. |
| As output, point to actual size of variable name. |
| @param VariableName As input, supplies the last VariableName that was returned by |
| GetNextVariableName(). |
| As output, returns the name of variable. The name |
| string is Null-Terminated Unicode string. |
| @param VendorGuid As input, supplies the last VendorGuid that was returned by |
| GetNextVriableName(). |
| As output, returns the VendorGuid of the current variable. |
| |
| @retval EFI_SUCCESS The function completed successfully. |
| @retval EFI_NOT_FOUND The next variable was not found. |
| @retval EFI_BUFFER_TOO_SMALL The VariableNameSize is too small for the result. |
| VariableNameSize has been updated with the size needed |
| to complete the request. |
| @retval EFI_INVALID_PARAMETER VariableNameSize is NULL. |
| @retval EFI_INVALID_PARAMETER VariableName is NULL. |
| @retval EFI_INVALID_PARAMETER VendorGuid is NULL. |
| @retval EFI_DEVICE_ERROR The variable name could not be retrieved due to a hardware error. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiGetNextVariableName ( |
| IN OUT UINTN *VariableNameSize, |
| IN OUT CHAR16 *VariableName, |
| IN OUT EFI_GUID *VendorGuid |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service GetNextVariableName() |
| |
| Variables are stored by the firmware and may maintain their values across power cycles. Each vendor |
| may create and manage its own variables without the risk of name conflicts by using a unique VendorGuid. |
| |
| @param VariableName the name of the vendor's variable, as a |
| Null-Terminated Unicode String |
| @param VendorGuid Unify identifier for vendor. |
| @param Attributes Point to memory location to return the attributes of variable. If the point |
| is NULL, the parameter would be ignored. |
| @param DataSize The size in bytes of Data-Buffer. |
| @param Data Point to the content of the variable. |
| |
| @retval EFI_SUCCESS The firmware has successfully stored the variable and its data as |
| defined by the Attributes. |
| @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits was supplied, or the |
| DataSize exceeds the maximum allowed. |
| @retval EFI_INVALID_PARAMETER VariableName is an empty Unicode string. |
| @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the variable and its data. |
| @retval EFI_DEVICE_ERROR The variable could not be saved due to a hardware failure. |
| @retval EFI_WRITE_PROTECTED The variable in question is read-only. |
| @retval EFI_WRITE_PROTECTED The variable in question cannot be deleted. |
| @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS |
| set but the AuthInfo does NOT pass the validation check carried |
| out by the firmware. |
| @retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiSetVariable ( |
| IN CHAR16 *VariableName, |
| IN EFI_GUID *VendorGuid, |
| IN UINT32 Attributes, |
| IN UINTN DataSize, |
| IN VOID *Data |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service GetNextHighMonotonicCount(). |
| |
| The platform's monotonic counter is comprised of two 32-bit quantities: the high 32 bits and |
| the low 32 bits. During boot service time the low 32-bit value is volatile: it is reset to zero |
| on every system reset and is increased by 1 on every call to GetNextMonotonicCount(). The high |
| 32-bit value is nonvolatile and is increased by 1 whenever the system resets or whenever the low |
| 32-bit count (returned by GetNextMonoticCount()) overflows. |
| |
| @param HighCount Pointer to returned value. |
| |
| @retval EFI_SUCCESS The next high monotonic count was returned. |
| @retval EFI_DEVICE_ERROR The device is not functioning properly. |
| @retval EFI_INVALID_PARAMETER HighCount is NULL. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiGetNextHighMonotonicCount ( |
| OUT UINT32 *HighCount |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service ResetSystem(). |
| |
| The ResetSystem()function resets the entire platform, including all processors and devices,and reboots the system. |
| Calling this interface with ResetType of EfiResetCold causes a system-wide reset. This sets all circuitry within |
| the system to its initial state. This type of reset is asynchronous to system operation and operates without regard |
| to cycle boundaries. EfiResetCold is tantamount to a system power cycle. |
| Calling this interface with ResetType of EfiResetWarm causes a system-wide initialization. The processors are set to |
| their initial state, and pending cycles are not corrupted. If the system does not support this reset type, then an |
| EfiResetCold must be performed. |
| Calling this interface with ResetType of EfiResetShutdown causes the system to enter a power state equivalent to the |
| ACPI G2/S5 or G3 states. If the system does not support this reset type, then when the system is rebooted, it should |
| exhibit the EfiResetCold attributes. |
| The platform may optionally log the parameters from any non-normal reset that occurs. |
| The ResetSystem() function does not return. |
| |
| @param ResetType The type of reset to perform. |
| @param ResetStatus The status code for the reset. If the system reset is part of a normal operation, the status code |
| would be EFI_SUCCESS. If the system reset is due to some type of failure the most appropriate EFI |
| Status code would be used. |
| @param DataSizeThe size, in bytes, of ResetData. |
| @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or EfiResetShutdown the data buffer starts with a |
| Null-terminated Unicode string, optionally followed by additional binary data. The string is a |
| description that the caller may use to further indicate the reason for the system reset. ResetData |
| is only valid if ResetStatus is something other then EFI_SUCCESS. This pointer must be a physical |
| address. For a ResetType of EfiResetPlatformSpecific the data buffer also starts with a Null-terminated |
| string that is followed by an EFI_GUID that describes the specific type of reset to perform. |
| **/ |
| VOID |
| EFIAPI |
| EfiResetSystem ( |
| IN EFI_RESET_TYPE ResetType, |
| IN EFI_STATUS ResetStatus, |
| IN UINTN DataSize, |
| IN VOID *ResetData OPTIONAL |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service ConvertPointer(). |
| |
| The ConvertPointer() function is used by an EFI component during the SetVirtualAddressMap() operation. |
| ConvertPointer()must be called using physical address pointers during the execution of SetVirtualAddressMap(). |
| |
| @param DebugDisposition Supplies type information for the pointer being converted. |
| @param Address The pointer to a pointer that is to be fixed to be the |
| value needed for the new virtual address mapping being |
| applied. |
| |
| @retval EFI_SUCCESS The pointer pointed to by Address was modified. |
| @retval EFI_NOT_FOUND The pointer pointed to by Address was not found to be part of |
| the current memory map. This is normally fatal. |
| @retval EFI_INVALID_PARAMETER Address is NULL. |
| @retval EFI_INVALID_PARAMETER *Address is NULL and DebugDispositio |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiConvertPointer ( |
| IN UINTN DebugDisposition, |
| IN OUT VOID **Address |
| ); |
| |
| /** |
| Determines the new virtual address that is to be used on subsequent memory accesses. |
| |
| For IA32, x64, and EBC, this service is a wrapper for the UEFI Runtime Service |
| ConvertPointer(). See the UEFI Specification for details. |
| For IPF, this function interprets Address as a pointer to an EFI_PLABEL structure |
| and both the EntryPoint and GP fields of an EFI_PLABEL are converted from physical |
| to virtiual addressing. Since IPF allows the GP to point to an address outside |
| a PE/COFF image, the physical to virtual offset for the EntryPoint field is used |
| to adjust the GP field. The UEFI Runtime Service ConvertPointer() is used to convert |
| EntryPoint and the status code for this conversion is always returned. If the convertion |
| of EntryPoint fails, then neither EntryPoint nor GP are modified. See the UEFI |
| Specification for details on the UEFI Runtime Service ConvertPointer(). |
| |
| @param DebugDisposition Supplies type information for the pointer being converted. |
| @param Address The pointer to a pointer that is to be fixed to be the |
| value needed for the new virtual address mapping being |
| applied. |
| |
| @return EFI_STATUS value from EfiConvertPointer(). |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiConvertFunctionPointer ( |
| IN UINTN DebugDisposition, |
| IN OUT VOID **Address |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service SetVirtualAddressMap(). |
| |
| The SetVirtualAddressMap() function is used by the OS loader. The function can only be called |
| at runtime, and is called by the owner of the system's memory map. I.e., the component which |
| called ExitBootServices(). All events of type EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE must be signaled |
| before SetVirtualAddressMap() returns. |
| |
| @param MemoryMapSize The size in bytes of VirtualMap. |
| @param DescriptorSize The size in bytes of an entry in the VirtualMap. |
| @param DescriptorVersion The version of the structure entries in VirtualMap. |
| @param VirtualMap An array of memory descriptors which contain new virtual |
| address mapping information for all runtime ranges. Type |
| EFI_MEMORY_DESCRIPTOR is defined in the |
| GetMemoryMap() function description. |
| |
| @retval EFI_SUCCESS The virtual address map has been applied. |
| @retval EFI_UNSUPPORTED EFI firmware is not at runtime, or the EFI firmware is already in |
| virtual address mapped mode. |
| @retval EFI_INVALID_PARAMETER DescriptorSize or DescriptorVersion is |
| invalid. |
| @retval EFI_NO_MAPPING A virtual address was not supplied for a range in the memory |
| map that requires a mapping. |
| @retval EFI_NOT_FOUND A virtual address was supplied for an address that is not found |
| in the memory map. |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiSetVirtualAddressMap ( |
| IN UINTN MemoryMapSize, |
| IN UINTN DescriptorSize, |
| IN UINT32 DescriptorVersion, |
| IN CONST EFI_MEMORY_DESCRIPTOR *VirtualMap |
| ); |
| |
| |
| /** |
| Convert the standard Lib double linked list to a virtual mapping. |
| |
| This service uses EfiConvertPointer() to walk a double linked list and convert all the link |
| pointers to their virtual mappings. This function is only guaranteed to work during the |
| EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event and calling it at other times has undefined results. |
| |
| @param DebugDisposition Supplies type information for the pointer being converted. |
| @param ListHead Head of linked list to convert. |
| |
| @retval EFI_SUCCESS Successfully executed the function. |
| @retval !EFI_SUCCESS Failed to execute the function. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiConvertList ( |
| IN UINTN DebugDisposition, |
| IN OUT LIST_ENTRY *ListHead |
| ); |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service UpdateCapsule(). |
| |
| Passes capsules to the firmware with both virtual and physical mapping. Depending on the intended |
| consumption, the firmware may process the capsule immediately. If the payload should persist across a |
| system reset, the reset value returned from EFI_QueryCapsuleCapabilities must be passed into ResetSystem() |
| and will cause the capsule to be processed by the firmware as part of the reset process. |
| |
| @param CapsuleHeaderArray Virtual pointer to an array of virtual pointers to the capsules |
| being passed into update capsule. Each capsules is assumed to |
| stored in contiguous virtual memory. The capsules in the |
| CapsuleHeaderArray must be the same capsules as the |
| ScatterGatherList. The CapsuleHeaderArray must |
| have the capsules in the same order as the ScatterGatherList. |
| @param CapsuleCount Number of pointers to EFI_CAPSULE_HEADER in |
| CaspuleHeaderArray. |
| @param ScatterGatherList Physical pointer to a set of |
| EFI_CAPSULE_BLOCK_DESCRIPTOR that describes the |
| location in physical memory of a set of capsules. See Related |
| Definitions for an explanation of how more than one capsule is |
| passed via this interface. The capsules in the |
| ScatterGatherList must be in the same order as the |
| CapsuleHeaderArray. This parameter is only referenced if |
| the capsules are defined to persist across system reset. |
| |
| @retval EFI_SUCCESS A valid capsule was passed. If CAPSULE_FLAGS_PERSIT_ACROSS_RESET is not set, |
| the capsule has been successfully processed by the firmware. |
| @retval EFI_INVALID_PARAMETER CapsuleSize is NULL, or an incompatible set of flags were |
| set in the capsule header. |
| @retval EFI_INVALID_PARAMETER CapsuleCount is 0 |
| @retval EFI_DEVICE_ERROR The capsule update was started, but failed due to a device error. |
| @retval EFI_UNSUPPORTED The capsule type is not supported on this platform. |
| @retval EFI_OUT_OF_RESOURCES There were insufficient resources to process the capsule. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiUpdateCapsule ( |
| IN EFI_CAPSULE_HEADER **CapsuleHeaderArray, |
| IN UINTN CapsuleCount, |
| IN EFI_PHYSICAL_ADDRESS ScatterGatherList OPTIONAL |
| ); |
| |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service QueryCapsuleCapabilities(). |
| |
| The QueryCapsuleCapabilities() function allows a caller to test to see if a capsule or |
| capsules can be updated via UpdateCapsule(). The Flags values in the capsule header and |
| size of the entire capsule is checked. |
| If the caller needs to query for generic capsule capability a fake EFI_CAPSULE_HEADER can be |
| constructed where CapsuleImageSize is equal to HeaderSize that is equal to sizeof |
| (EFI_CAPSULE_HEADER). To determine reset requirements, |
| CAPSULE_FLAGS_PERSIST_ACROSS_RESET should be set in the Flags field of the |
| EFI_CAPSULE_HEADER. |
| The firmware must support any capsule that has the |
| CAPSULE_FLAGS_PERSIST_ACROSS_RESET flag set in EFI_CAPSULE_HEADER. The |
| firmware sets the policy for what capsules are supported that do not have the |
| CAPSULE_FLAGS_PERSIST_ACROSS_RESET flag set. |
| |
| @param CapsuleHeaderArray Virtual pointer to an array of virtual pointers to the capsules |
| being passed into update capsule. The capsules are assumed to |
| stored in contiguous virtual memory. |
| @param CapsuleCount Number of pointers to EFI_CAPSULE_HEADER in |
| CaspuleHeaderArray. |
| @param MaximumCapsuleSize On output the maximum size that UpdateCapsule() can |
| support as an argument to UpdateCapsule() via |
| CapsuleHeaderArray and ScatterGatherList. |
| Undefined on input. |
| @param ResetType Returns the type of reset required for the capsule update. |
| |
| @retval EFI_SUCCESS A valid answer was returned. |
| @retval EFI_INVALID_PARAMETER MaximumCapsuleSize is NULL. |
| @retval EFI_UNSUPPORTED The capsule type is not supported on this platform, and |
| MaximumCapsuleSize and ResetType are undefined. |
| @retval EFI_OUT_OF_RESOURCES There were insufficient resources to process the query request. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiQueryCapsuleCapabilities ( |
| IN EFI_CAPSULE_HEADER **CapsuleHeaderArray, |
| IN UINTN CapsuleCount, |
| OUT UINT64 *MaximumCapsuleSize, |
| OUT EFI_RESET_TYPE *ResetType |
| ); |
| |
| |
| /** |
| This service is a wrapper for the UEFI Runtime Service QueryVariableInfo(). |
| |
| The QueryVariableInfo() function allows a caller to obtain the information about the |
| maximum size of the storage space available for the EFI variables, the remaining size of the storage |
| space available for the EFI variables and the maximum size of each individual EFI variable, |
| associated with the attributes specified. |
| The returned MaximumVariableStorageSize, RemainingVariableStorageSize, |
| MaximumVariableSize information may change immediately after the call based on other |
| runtime activities including asynchronous error events. Also, these values associated with different |
| attributes are not additive in nature. |
| |
| @param Attributes Attributes bitmask to specify the type of variables on |
| which to return information. Refer to the |
| GetVariable() function description. |
| @param MaximumVariableStorageSize |
| On output the maximum size of the storage space |
| available for the EFI variables associated with the |
| attributes specified. |
| @param RemainingVariableStorageSize |
| Returns the remaining size of the storage space |
| available for the EFI variables associated with the |
| attributes specified. |
| @param MaximumVariableSize Returns the maximum size of the individual EFI |
| variables associated with the attributes specified. |
| |
| @retval EFI_SUCCESS A valid answer was returned. |
| @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits was supplied. |
| @retval EFI_UNSUPPORTED EFI_UNSUPPORTED The attribute is not supported on this platform, and the |
| MaximumVariableStorageSize, |
| RemainingVariableStorageSize, MaximumVariableSize |
| are undefined. |
| |
| **/ |
| EFI_STATUS |
| EFIAPI |
| EfiQueryVariableInfo ( |
| IN UINT32 Attributes, |
| OUT UINT64 *MaximumVariableStorageSize, |
| OUT UINT64 *RemainingVariableStorageSize, |
| OUT UINT64 *MaximumVariableSize |
| ); |
| |
| #endif |
| |