| /** @file |
| Smbus Library Services that conduct SMBus transactions and enable the operatation |
| to be replayed during an S3 resume. This library class maps directly on top |
| of the SmbusLib class. |
| |
| Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR> |
| |
| This program and the accompanying materials |
| are licensed and made available under the terms and conditions |
| of the BSD License which accompanies this distribution. The |
| full text of the license may be found at |
| http://opensource.org/licenses/bsd-license.php |
| |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. |
| |
| **/ |
| |
| #ifndef __S3_SMBUS_LIB_H__ |
| #define __S3_SMBUS_LIB_H__ |
| |
| /** |
| Executes an SMBUS quick read command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS quick read command on the SMBUS device specified by SmBusAddress. |
| Only the SMBUS slave address field of SmBusAddress is required. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| If PEC is set in SmBusAddress, then ASSERT(). |
| If Command in SmBusAddress is not zero, then ASSERT(). |
| If Length in SmBusAddress is not zero, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_SUCCESS The SMBUS command was executed. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| **/ |
| VOID |
| EFIAPI |
| S3SmBusQuickRead ( |
| IN UINTN SmBusAddress, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS quick write command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS quick write command on the SMBUS device specified by SmBusAddress. |
| Only the SMBUS slave address field of SmBusAddress is required. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| If PEC is set in SmBusAddress, then ASSERT(). |
| If Command in SmBusAddress is not zero, then ASSERT(). |
| If Length in SmBusAddress is not zero, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_SUCCESS The SMBUS command was executed. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| **/ |
| VOID |
| EFIAPI |
| S3SmBusQuickWrite ( |
| IN UINTN SmBusAddress, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS receive byte command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS receive byte command on the SMBUS device specified by SmBusAddress. |
| Only the SMBUS slave address field of SmBusAddress is required. |
| The byte received from the SMBUS is returned. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| If Command in SmBusAddress is not zero, then ASSERT(). |
| If Length in SmBusAddress is not zero, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_SUCCESS The SMBUS command was executed. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| @return The byte received from the SMBUS. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| S3SmBusReceiveByte ( |
| IN UINTN SmBusAddress, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS send byte command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS send byte command on the SMBUS device specified by SmBusAddress. |
| The byte specified by Value is sent. |
| Only the SMBUS slave address field of SmBusAddress is required. Value is returned. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| If Command in SmBusAddress is not zero, then ASSERT(). |
| If Length in SmBusAddress is not zero, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[in] Value The 8-bit value to send. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_SUCCESS The SMBUS command was executed. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus errors (collisions). |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| @return The parameter of Value. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| S3SmBusSendByte ( |
| IN UINTN SmBusAddress, |
| IN UINT8 Value, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS read data byte command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS read data byte command on the SMBUS device specified by SmBusAddress. |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. |
| The 8-bit value read from the SMBUS is returned. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| If Length in SmBusAddress is not zero, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_SUCCESS The SMBUS command was executed. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| @return The byte read from the SMBUS. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| S3SmBusReadDataByte ( |
| IN UINTN SmBusAddress, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS write data byte command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS write data byte command on the SMBUS device specified by SmBusAddress. |
| The 8-bit value specified by Value is written. |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. |
| Value is returned. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| If Length in SmBusAddress is not zero, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[in] Value The 8-bit value to write. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_SUCCESS The SMBUS command was executed. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| @return The parameter of Value. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| S3SmBusWriteDataByte ( |
| IN UINTN SmBusAddress, |
| IN UINT8 Value, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS read data word command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS read data word command on the SMBUS device specified by SmBusAddress. |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. |
| The 16-bit value read from the SMBUS is returned. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| If Length in SmBusAddress is not zero, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_SUCCESS The SMBUS command was executed. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| @return The byte read from the SMBUS. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| S3SmBusReadDataWord ( |
| IN UINTN SmBusAddress, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS write data word command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS write data word command on the SMBUS device specified by SmBusAddress. |
| The 16-bit value specified by Value is written. |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. |
| Value is returned. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| If Length in SmBusAddress is not zero, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[in] Value The 16-bit value to write. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_SUCCESS The SMBUS command was executed. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| @return The parameter of Value. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| S3SmBusWriteDataWord ( |
| IN UINTN SmBusAddress, |
| IN UINT16 Value, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS process call command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS process call command on the SMBUS device specified by SmBusAddress. |
| The 16-bit value specified by Value is written. |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. |
| The 16-bit value returned by the process call command is returned. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| If Length in SmBusAddress is not zero, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[in] Value The 16-bit value to write. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_SUCCESS The SMBUS command was executed. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| @return The 16-bit value returned by the process call command. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| S3SmBusProcessCall ( |
| IN UINTN SmBusAddress, |
| IN UINT16 Value, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS read block command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS read block command on the SMBUS device specified by SmBusAddress. |
| Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. |
| Bytes are read from the SMBUS and stored in Buffer. |
| The number of bytes read is returned, and will never return a value larger than 32-bytes. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read. |
| SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. |
| If Length in SmBusAddress is not zero, then ASSERT(). |
| If Buffer is NULL, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[out] Buffer The pointer to the buffer to store the bytes read from the SMBUS. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_SUCCESS The SMBUS command was executed. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| @return The number of bytes read. |
| |
| **/ |
| UINTN |
| EFIAPI |
| S3SmBusReadBlock ( |
| IN UINTN SmBusAddress, |
| OUT VOID *Buffer, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS write block command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS write block command on the SMBUS device specified by SmBusAddress. |
| The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. |
| Bytes are written to the SMBUS from Buffer. |
| The number of bytes written is returned, and will never return a value larger than 32-bytes. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| If Length in SmBusAddress is zero or greater than 32, then ASSERT(). |
| If Buffer is NULL, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[out] Buffer The pointer to the buffer to store the bytes read from the SMBUS. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| @return The number of bytes written. |
| |
| **/ |
| UINTN |
| EFIAPI |
| S3SmBusWriteBlock ( |
| IN UINTN SmBusAddress, |
| OUT VOID *Buffer, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| /** |
| Executes an SMBUS block process call command, and saves the value in the S3 script to be replayed |
| on S3 resume. |
| |
| Executes an SMBUS block process call command on the SMBUS device specified by SmBusAddress. |
| The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. |
| Bytes are written to the SMBUS from WriteBuffer. Bytes are then read from the SMBUS into ReadBuffer. |
| If Status is not NULL, then the status of the executed command is returned in Status. |
| It is the caller's responsibility to make sure ReadBuffer is large enough for the total number of bytes read. |
| SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. |
| If Length in SmBusAddress is zero or greater than 32, then ASSERT(). |
| If WriteBuffer is NULL, then ASSERT(). |
| If ReadBuffer is NULL, then ASSERT(). |
| If any reserved bits of SmBusAddress are set, then ASSERT(). |
| |
| @param[in] SmBusAddress The address that encodes the SMBUS Slave Address, |
| SMBUS Command, SMBUS Data Length, and PEC. |
| @param[in] WriteBuffer The pointer to the buffer of bytes to write to the SMBUS. |
| @param[out] ReadBuffer The pointer to the buffer of bytes to read from the SMBUS. |
| @param[out] Status The return status for the executed command. |
| This is an optional parameter and may be NULL. |
| RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. |
| RETURN_DEVICE_ERROR The request was not completed because a failure |
| was recorded in the Host Status Register bit. Device errors are a result |
| of a transaction collision, illegal command field, unclaimed cycle |
| (host initiated), or bus error (collision). |
| RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect). |
| RETURN_UNSUPPORTED The SMBus operation is not supported. |
| |
| @return The number of bytes written. |
| |
| **/ |
| UINTN |
| EFIAPI |
| S3SmBusBlockProcessCall ( |
| IN UINTN SmBusAddress, |
| IN VOID *WriteBuffer, |
| OUT VOID *ReadBuffer, |
| OUT RETURN_STATUS *Status OPTIONAL |
| ); |
| |
| #endif |