| /** @file |
| Provides services to access PCI Configuration Space on a platform with multiple PCI segments. |
| |
| The PCI Segment Library function provide services to read, write, and modify the PCI configuration |
| registers on PCI root bridges on any supported PCI segment. These library services take a single |
| address parameter that encodes the PCI Segment, PCI Bus, PCI Device, PCI Function, and PCI Register. |
| The layout of this address parameter is as follows: |
| |
| PCI Register: Bits 0..11 |
| PCI Function Bits 12..14 |
| PCI Device Bits 15..19 |
| PCI Bus Bits 20..27 |
| Reserved Bits 28..31. Must be 0. |
| PCI Segment Bits 32..47 |
| Reserved Bits 48..63. Must be 0. |
| |
| | Reserved (MBZ) | Segment | Reserved (MBZ) | Bus | Device | Function | Register | |
| 63 48 47 32 31 28 27 20 19 15 14 12 11 0 |
| |
| These functions perform PCI configuration cycles using the default PCI configuration access |
| method. This may use I/O ports 0xCF8 and 0xCFC to perform PCI configuration accesses, or it |
| may use MMIO registers relative to the PcdPciExpressBaseAddress, or it may use some alternate |
| access method. Modules will typically use the PCI Segment Library for its PCI configuration |
| accesses when PCI Segments other than Segment #0 must be accessed. |
| |
| Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR> |
| This program and the accompanying materials |
| are licensed and made available under the terms and conditions of the BSD License |
| which accompanies this distribution. The full text of the license may be found at |
| http://opensource.org/licenses/bsd-license.php |
| |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. |
| |
| **/ |
| |
| #ifndef __PCI_SEGMENT_LIB__ |
| #define __PCI_SEGMENT_LIB__ |
| |
| |
| /** |
| Macro that converts PCI Segment, PCI Bus, PCI Device, PCI Function, |
| and PCI Register to an address that can be passed to the PCI Segment Library functions. |
| |
| Computes an address that is compatible with the PCI Segment Library functions. |
| The unused upper bits of Segment, Bus, Device, Function, |
| and Register are stripped prior to the generation of the address. |
| |
| @param Segment PCI Segment number. Range 0..65535. |
| @param Bus PCI Bus number. Range 0..255. |
| @param Device PCI Device number. Range 0..31. |
| @param Function PCI Function number. Range 0..7. |
| @param Register PCI Register number. Range 0..255 for PCI. Range 0..4095 for PCI Express. |
| |
| @return The address that is compatible with the PCI Segment Library functions. |
| |
| **/ |
| #define PCI_SEGMENT_LIB_ADDRESS(Segment,Bus,Device,Function,Register) \ |
| ((Segment != 0) ? \ |
| ( ((Register) & 0xfff) | \ |
| (((Function) & 0x07) << 12) | \ |
| (((Device) & 0x1f) << 15) | \ |
| (((Bus) & 0xff) << 20) | \ |
| (LShiftU64 ((Segment) & 0xffff, 32)) \ |
| ) : \ |
| ( ((Register) & 0xfff) | \ |
| (((Function) & 0x07) << 12) | \ |
| (((Device) & 0x1f) << 15) | \ |
| (((Bus) & 0xff) << 20) \ |
| ) \ |
| ) |
| |
| /** |
| Register a PCI device so PCI configuration registers may be accessed after |
| SetVirtualAddressMap(). |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Bus, Device, Function and |
| Register. |
| |
| @retval RETURN_SUCCESS The PCI device was registered for runtime access. |
| @retval RETURN_UNSUPPORTED An attempt was made to call this function |
| after ExitBootServices(). |
| @retval RETURN_UNSUPPORTED The resources required to access the PCI device |
| at runtime could not be mapped. |
| @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to |
| complete the registration. |
| |
| **/ |
| RETURN_STATUS |
| EFIAPI |
| PciSegmentRegisterForRuntimeAccess ( |
| IN UINTN Address |
| ); |
| |
| /** |
| Reads an 8-bit PCI configuration register. |
| |
| Reads and returns the 8-bit PCI configuration register specified by Address. |
| This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| |
| @return The 8-bit PCI configuration register specified by Address. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| PciSegmentRead8 ( |
| IN UINT64 Address |
| ); |
| |
| /** |
| Writes an 8-bit PCI configuration register. |
| |
| Writes the 8-bit PCI configuration register specified by Address with the value specified by Value. |
| Value is returned. This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param Value The value to write. |
| |
| @return The value written to the PCI configuration register. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| PciSegmentWrite8 ( |
| IN UINT64 Address, |
| IN UINT8 Value |
| ); |
| |
| /** |
| Performs a bitwise OR of an 8-bit PCI configuration register with an 8-bit value. |
| |
| Reads the 8-bit PCI configuration register specified by Address, |
| performs a bitwise OR between the read result and the value specified by OrData, |
| and writes the result to the 8-bit PCI configuration register specified by Address. |
| The value written to the PCI configuration register is returned. |
| This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param OrData The value to OR with the PCI configuration register. |
| |
| @return The value written to the PCI configuration register. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| PciSegmentOr8 ( |
| IN UINT64 Address, |
| IN UINT8 OrData |
| ); |
| |
| /** |
| Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value. |
| |
| Reads the 8-bit PCI configuration register specified by Address, |
| performs a bitwise AND between the read result and the value specified by AndData, |
| and writes the result to the 8-bit PCI configuration register specified by Address. |
| The value written to the PCI configuration register is returned. |
| This function must guarantee that all PCI read and write operations are serialized. |
| If any reserved bits in Address are set, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param AndData The value to AND with the PCI configuration register. |
| |
| @return The value written to the PCI configuration register. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| PciSegmentAnd8 ( |
| IN UINT64 Address, |
| IN UINT8 AndData |
| ); |
| |
| /** |
| Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value, |
| followed a bitwise OR with another 8-bit value. |
| |
| Reads the 8-bit PCI configuration register specified by Address, |
| performs a bitwise AND between the read result and the value specified by AndData, |
| performs a bitwise OR between the result of the AND operation and the value specified by OrData, |
| and writes the result to the 8-bit PCI configuration register specified by Address. |
| The value written to the PCI configuration register is returned. |
| This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param AndData The value to AND with the PCI configuration register. |
| @param OrData The value to OR with the PCI configuration register. |
| |
| @return The value written to the PCI configuration register. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| PciSegmentAndThenOr8 ( |
| IN UINT64 Address, |
| IN UINT8 AndData, |
| IN UINT8 OrData |
| ); |
| |
| /** |
| Reads a bit field of a PCI configuration register. |
| |
| Reads the bit field in an 8-bit PCI configuration register. The bit field is |
| specified by the StartBit and the EndBit. The value of the bit field is |
| returned. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If StartBit is greater than 7, then ASSERT(). |
| If EndBit is greater than 7, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| |
| @param Address PCI configuration register to read. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..7. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..7. |
| |
| @return The value of the bit field read from the PCI configuration register. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| PciSegmentBitFieldRead8 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit |
| ); |
| |
| /** |
| Writes a bit field to a PCI configuration register. |
| |
| Writes Value to the bit field of the PCI configuration register. The bit |
| field is specified by the StartBit and the EndBit. All other bits in the |
| destination PCI configuration register are preserved. The new value of the |
| 8-bit register is returned. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If StartBit is greater than 7, then ASSERT(). |
| If EndBit is greater than 7, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address PCI configuration register to write. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..7. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..7. |
| @param Value New value of the bit field. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| PciSegmentBitFieldWrite8 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT8 Value |
| ); |
| |
| /** |
| Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and |
| writes the result back to the bit field in the 8-bit port. |
| |
| Reads the 8-bit PCI configuration register specified by Address, performs a |
| bitwise OR between the read result and the value specified by |
| OrData, and writes the result to the 8-bit PCI configuration register |
| specified by Address. The value written to the PCI configuration register is |
| returned. This function must guarantee that all PCI read and write operations |
| are serialized. Extra left bits in OrData are stripped. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If StartBit is greater than 7, then ASSERT(). |
| If EndBit is greater than 7, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address PCI configuration register to write. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..7. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..7. |
| @param OrData The value to OR with the PCI configuration register. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| PciSegmentBitFieldOr8 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT8 OrData |
| ); |
| |
| /** |
| Reads a bit field in an 8-bit PCI configuration register, performs a bitwise |
| AND, and writes the result back to the bit field in the 8-bit register. |
| |
| Reads the 8-bit PCI configuration register specified by Address, performs a |
| bitwise AND between the read result and the value specified by AndData, and |
| writes the result to the 8-bit PCI configuration register specified by |
| Address. The value written to the PCI configuration register is returned. |
| This function must guarantee that all PCI read and write operations are |
| serialized. Extra left bits in AndData are stripped. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If StartBit is greater than 7, then ASSERT(). |
| If EndBit is greater than 7, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address PCI configuration register to write. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..7. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..7. |
| @param AndData The value to AND with the PCI configuration register. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| PciSegmentBitFieldAnd8 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT8 AndData |
| ); |
| |
| /** |
| Reads a bit field in an 8-bit port, performs a bitwise AND followed by a |
| bitwise OR, and writes the result back to the bit field in the 8-bit port. |
| |
| Reads the 8-bit PCI configuration register specified by Address, performs a |
| bitwise AND followed by a bitwise OR between the read result and |
| the value specified by AndData, and writes the result to the 8-bit PCI |
| configuration register specified by Address. The value written to the PCI |
| configuration register is returned. This function must guarantee that all PCI |
| read and write operations are serialized. Extra left bits in both AndData and |
| OrData are stripped. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If StartBit is greater than 7, then ASSERT(). |
| If EndBit is greater than 7, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address PCI configuration register to write. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..7. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..7. |
| @param AndData The value to AND with the PCI configuration register. |
| @param OrData The value to OR with the result of the AND operation. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT8 |
| EFIAPI |
| PciSegmentBitFieldAndThenOr8 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT8 AndData, |
| IN UINT8 OrData |
| ); |
| |
| /** |
| Reads a 16-bit PCI configuration register. |
| |
| Reads and returns the 16-bit PCI configuration register specified by Address. |
| This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 16-bit boundary, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| |
| @return The 16-bit PCI configuration register specified by Address. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| PciSegmentRead16 ( |
| IN UINT64 Address |
| ); |
| |
| /** |
| Writes a 16-bit PCI configuration register. |
| |
| Writes the 16-bit PCI configuration register specified by Address with the value specified by Value. |
| Value is returned. This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 16-bit boundary, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param Value The value to write. |
| |
| @return The parameter of Value. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| PciSegmentWrite16 ( |
| IN UINT64 Address, |
| IN UINT16 Value |
| ); |
| |
| /** |
| Performs a bitwise OR of a 16-bit PCI configuration register with |
| a 16-bit value. |
| |
| Reads the 16-bit PCI configuration register specified by Address, performs a |
| bitwise OR between the read result and the value specified by OrData, and |
| writes the result to the 16-bit PCI configuration register specified by Address. |
| The value written to the PCI configuration register is returned. This function |
| must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 16-bit boundary, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function and |
| Register. |
| @param OrData The value to OR with the PCI configuration register. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| PciSegmentOr16 ( |
| IN UINT64 Address, |
| IN UINT16 OrData |
| ); |
| |
| /** |
| Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value. |
| |
| Reads the 16-bit PCI configuration register specified by Address, |
| performs a bitwise AND between the read result and the value specified by AndData, |
| and writes the result to the 16-bit PCI configuration register specified by Address. |
| The value written to the PCI configuration register is returned. |
| This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 16-bit boundary, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param AndData The value to AND with the PCI configuration register. |
| |
| @return The value written to the PCI configuration register. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| PciSegmentAnd16 ( |
| IN UINT64 Address, |
| IN UINT16 AndData |
| ); |
| |
| /** |
| Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value, |
| followed a bitwise OR with another 16-bit value. |
| |
| Reads the 16-bit PCI configuration register specified by Address, |
| performs a bitwise AND between the read result and the value specified by AndData, |
| performs a bitwise OR between the result of the AND operation and the value specified by OrData, |
| and writes the result to the 16-bit PCI configuration register specified by Address. |
| The value written to the PCI configuration register is returned. |
| This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 16-bit boundary, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param AndData The value to AND with the PCI configuration register. |
| @param OrData The value to OR with the PCI configuration register. |
| |
| @return The value written to the PCI configuration register. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| PciSegmentAndThenOr16 ( |
| IN UINT64 Address, |
| IN UINT16 AndData, |
| IN UINT16 OrData |
| ); |
| |
| /** |
| Reads a bit field of a PCI configuration register. |
| |
| Reads the bit field in a 16-bit PCI configuration register. The bit field is |
| specified by the StartBit and the EndBit. The value of the bit field is |
| returned. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 16-bit boundary, then ASSERT(). |
| If StartBit is greater than 15, then ASSERT(). |
| If EndBit is greater than 15, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| |
| @param Address PCI configuration register to read. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..15. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..15. |
| |
| @return The value of the bit field read from the PCI configuration register. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| PciSegmentBitFieldRead16 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit |
| ); |
| |
| /** |
| Writes a bit field to a PCI configuration register. |
| |
| Writes Value to the bit field of the PCI configuration register. The bit |
| field is specified by the StartBit and the EndBit. All other bits in the |
| destination PCI configuration register are preserved. The new value of the |
| 16-bit register is returned. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 16-bit boundary, then ASSERT(). |
| If StartBit is greater than 15, then ASSERT(). |
| If EndBit is greater than 15, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address PCI configuration register to write. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..15. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..15. |
| @param Value New value of the bit field. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| PciSegmentBitFieldWrite16 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT16 Value |
| ); |
| |
| /** |
| Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, writes |
| the result back to the bit field in the 16-bit port. |
| |
| Reads the 16-bit PCI configuration register specified by Address, performs a |
| bitwise OR between the read result and the value specified by |
| OrData, and writes the result to the 16-bit PCI configuration register |
| specified by Address. The value written to the PCI configuration register is |
| returned. This function must guarantee that all PCI read and write operations |
| are serialized. Extra left bits in OrData are stripped. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 16-bit boundary, then ASSERT(). |
| If StartBit is greater than 15, then ASSERT(). |
| If EndBit is greater than 15, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address PCI configuration register to write. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..15. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..15. |
| @param OrData The value to OR with the PCI configuration register. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| PciSegmentBitFieldOr16 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT16 OrData |
| ); |
| |
| /** |
| Reads a bit field in a 16-bit PCI configuration register, performs a bitwise |
| AND, writes the result back to the bit field in the 16-bit register. |
| |
| Reads the 16-bit PCI configuration register specified by Address, performs a |
| bitwise AND between the read result and the value specified by AndData, and |
| writes the result to the 16-bit PCI configuration register specified by |
| Address. The value written to the PCI configuration register is returned. |
| This function must guarantee that all PCI read and write operations are |
| serialized. Extra left bits in AndData are stripped. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 16-bit boundary, then ASSERT(). |
| If StartBit is greater than 15, then ASSERT(). |
| If EndBit is greater than 15, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..15. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..15. |
| @param AndData The value to AND with the PCI configuration register. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| PciSegmentBitFieldAnd16 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT16 AndData |
| ); |
| |
| /** |
| Reads a bit field in a 16-bit port, performs a bitwise AND followed by a |
| bitwise OR, and writes the result back to the bit field in the |
| 16-bit port. |
| |
| Reads the 16-bit PCI configuration register specified by Address, performs a |
| bitwise AND followed by a bitwise OR between the read result and |
| the value specified by AndData, and writes the result to the 16-bit PCI |
| configuration register specified by Address. The value written to the PCI |
| configuration register is returned. This function must guarantee that all PCI |
| read and write operations are serialized. Extra left bits in both AndData and |
| OrData are stripped. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If StartBit is greater than 15, then ASSERT(). |
| If EndBit is greater than 15, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address PCI configuration register to write. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..15. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..15. |
| @param AndData The value to AND with the PCI configuration register. |
| @param OrData The value to OR with the result of the AND operation. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT16 |
| EFIAPI |
| PciSegmentBitFieldAndThenOr16 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT16 AndData, |
| IN UINT16 OrData |
| ); |
| |
| /** |
| Reads a 32-bit PCI configuration register. |
| |
| Reads and returns the 32-bit PCI configuration register specified by Address. |
| This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 32-bit boundary, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| |
| @return The 32-bit PCI configuration register specified by Address. |
| |
| **/ |
| UINT32 |
| EFIAPI |
| PciSegmentRead32 ( |
| IN UINT64 Address |
| ); |
| |
| /** |
| Writes a 32-bit PCI configuration register. |
| |
| Writes the 32-bit PCI configuration register specified by Address with the value specified by Value. |
| Value is returned. This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 32-bit boundary, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param Value The value to write. |
| |
| @return The parameter of Value. |
| |
| **/ |
| UINT32 |
| EFIAPI |
| PciSegmentWrite32 ( |
| IN UINT64 Address, |
| IN UINT32 Value |
| ); |
| |
| /** |
| Performs a bitwise OR of a 32-bit PCI configuration register with a 32-bit value. |
| |
| Reads the 32-bit PCI configuration register specified by Address, |
| performs a bitwise OR between the read result and the value specified by OrData, |
| and writes the result to the 32-bit PCI configuration register specified by Address. |
| The value written to the PCI configuration register is returned. |
| This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 32-bit boundary, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param OrData The value to OR with the PCI configuration register. |
| |
| @return The value written to the PCI configuration register. |
| |
| **/ |
| UINT32 |
| EFIAPI |
| PciSegmentOr32 ( |
| IN UINT64 Address, |
| IN UINT32 OrData |
| ); |
| |
| /** |
| Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value. |
| |
| Reads the 32-bit PCI configuration register specified by Address, |
| performs a bitwise AND between the read result and the value specified by AndData, |
| and writes the result to the 32-bit PCI configuration register specified by Address. |
| The value written to the PCI configuration register is returned. |
| This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 32-bit boundary, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param AndData The value to AND with the PCI configuration register. |
| |
| @return The value written to the PCI configuration register. |
| |
| **/ |
| UINT32 |
| EFIAPI |
| PciSegmentAnd32 ( |
| IN UINT64 Address, |
| IN UINT32 AndData |
| ); |
| |
| /** |
| Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value, |
| followed a bitwise OR with another 32-bit value. |
| |
| Reads the 32-bit PCI configuration register specified by Address, |
| performs a bitwise AND between the read result and the value specified by AndData, |
| performs a bitwise OR between the result of the AND operation and the value specified by OrData, |
| and writes the result to the 32-bit PCI configuration register specified by Address. |
| The value written to the PCI configuration register is returned. |
| This function must guarantee that all PCI read and write operations are serialized. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 32-bit boundary, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param AndData The value to AND with the PCI configuration register. |
| @param OrData The value to OR with the PCI configuration register. |
| |
| @return The value written to the PCI configuration register. |
| |
| **/ |
| UINT32 |
| EFIAPI |
| PciSegmentAndThenOr32 ( |
| IN UINT64 Address, |
| IN UINT32 AndData, |
| IN UINT32 OrData |
| ); |
| |
| /** |
| Reads a bit field of a PCI configuration register. |
| |
| Reads the bit field in a 32-bit PCI configuration register. The bit field is |
| specified by the StartBit and the EndBit. The value of the bit field is |
| returned. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 32-bit boundary, then ASSERT(). |
| If StartBit is greater than 31, then ASSERT(). |
| If EndBit is greater than 31, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| |
| @param Address PCI configuration register to read. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..31. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..31. |
| |
| @return The value of the bit field read from the PCI configuration register. |
| |
| **/ |
| UINT32 |
| EFIAPI |
| PciSegmentBitFieldRead32 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit |
| ); |
| |
| /** |
| Writes a bit field to a PCI configuration register. |
| |
| Writes Value to the bit field of the PCI configuration register. The bit |
| field is specified by the StartBit and the EndBit. All other bits in the |
| destination PCI configuration register are preserved. The new value of the |
| 32-bit register is returned. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 32-bit boundary, then ASSERT(). |
| If StartBit is greater than 31, then ASSERT(). |
| If EndBit is greater than 31, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address PCI configuration register to write. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..31. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..31. |
| @param Value New value of the bit field. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT32 |
| EFIAPI |
| PciSegmentBitFieldWrite32 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT32 Value |
| ); |
| |
| /** |
| Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and |
| writes the result back to the bit field in the 32-bit port. |
| |
| Reads the 32-bit PCI configuration register specified by Address, performs a |
| bitwise OR between the read result and the value specified by |
| OrData, and writes the result to the 32-bit PCI configuration register |
| specified by Address. The value written to the PCI configuration register is |
| returned. This function must guarantee that all PCI read and write operations |
| are serialized. Extra left bits in OrData are stripped. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If StartBit is greater than 31, then ASSERT(). |
| If EndBit is greater than 31, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address PCI configuration register to write. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..31. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..31. |
| @param OrData The value to OR with the PCI configuration register. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT32 |
| EFIAPI |
| PciSegmentBitFieldOr32 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT32 OrData |
| ); |
| |
| /** |
| Reads a bit field in a 32-bit PCI configuration register, performs a bitwise |
| AND, and writes the result back to the bit field in the 32-bit register. |
| |
| |
| Reads the 32-bit PCI configuration register specified by Address, performs a bitwise |
| AND between the read result and the value specified by AndData, and writes the result |
| to the 32-bit PCI configuration register specified by Address. The value written to |
| the PCI configuration register is returned. This function must guarantee that all PCI |
| read and write operations are serialized. Extra left bits in AndData are stripped. |
| If any reserved bits in Address are set, then ASSERT(). |
| If Address is not aligned on a 32-bit boundary, then ASSERT(). |
| If StartBit is greater than 31, then ASSERT(). |
| If EndBit is greater than 31, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address Address that encodes the PCI Segment, Bus, Device, Function, and Register. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..31. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..31. |
| @param AndData The value to AND with the PCI configuration register. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT32 |
| EFIAPI |
| PciSegmentBitFieldAnd32 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT32 AndData |
| ); |
| |
| /** |
| Reads a bit field in a 32-bit port, performs a bitwise AND followed by a |
| bitwise OR, and writes the result back to the bit field in the |
| 32-bit port. |
| |
| Reads the 32-bit PCI configuration register specified by Address, performs a |
| bitwise AND followed by a bitwise OR between the read result and |
| the value specified by AndData, and writes the result to the 32-bit PCI |
| configuration register specified by Address. The value written to the PCI |
| configuration register is returned. This function must guarantee that all PCI |
| read and write operations are serialized. Extra left bits in both AndData and |
| OrData are stripped. |
| |
| If any reserved bits in Address are set, then ASSERT(). |
| If StartBit is greater than 31, then ASSERT(). |
| If EndBit is greater than 31, then ASSERT(). |
| If EndBit is less than StartBit, then ASSERT(). |
| If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). |
| |
| @param Address PCI configuration register to write. |
| @param StartBit The ordinal of the least significant bit in the bit field. |
| Range 0..31. |
| @param EndBit The ordinal of the most significant bit in the bit field. |
| Range 0..31. |
| @param AndData The value to AND with the PCI configuration register. |
| @param OrData The value to OR with the result of the AND operation. |
| |
| @return The value written back to the PCI configuration register. |
| |
| **/ |
| UINT32 |
| EFIAPI |
| PciSegmentBitFieldAndThenOr32 ( |
| IN UINT64 Address, |
| IN UINTN StartBit, |
| IN UINTN EndBit, |
| IN UINT32 AndData, |
| IN UINT32 OrData |
| ); |
| |
| /** |
| Reads a range of PCI configuration registers into a caller supplied buffer. |
| |
| Reads the range of PCI configuration registers specified by StartAddress and |
| Size into the buffer specified by Buffer. This function only allows the PCI |
| configuration registers from a single PCI function to be read. Size is |
| returned. When possible 32-bit PCI configuration read cycles are used to read |
| from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit |
| and 16-bit PCI configuration read cycles may be used at the beginning and the |
| end of the range. |
| |
| If any reserved bits in StartAddress are set, then ASSERT(). |
| If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). |
| If Size > 0 and Buffer is NULL, then ASSERT(). |
| |
| @param StartAddress Starting address that encodes the PCI Segment, Bus, Device, |
| Function and Register. |
| @param Size Size in bytes of the transfer. |
| @param Buffer Pointer to a buffer receiving the data read. |
| |
| @return Size |
| |
| **/ |
| UINTN |
| EFIAPI |
| PciSegmentReadBuffer ( |
| IN UINT64 StartAddress, |
| IN UINTN Size, |
| OUT VOID *Buffer |
| ); |
| |
| /** |
| Copies the data in a caller supplied buffer to a specified range of PCI |
| configuration space. |
| |
| Writes the range of PCI configuration registers specified by StartAddress and |
| Size from the buffer specified by Buffer. This function only allows the PCI |
| configuration registers from a single PCI function to be written. Size is |
| returned. When possible 32-bit PCI configuration write cycles are used to |
| write from StartAdress to StartAddress + Size. Due to alignment restrictions, |
| 8-bit and 16-bit PCI configuration write cycles may be used at the beginning |
| and the end of the range. |
| |
| If any reserved bits in StartAddress are set, then ASSERT(). |
| If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). |
| If Size > 0 and Buffer is NULL, then ASSERT(). |
| |
| @param StartAddress Starting address that encodes the PCI Segment, Bus, Device, |
| Function and Register. |
| @param Size Size in bytes of the transfer. |
| @param Buffer Pointer to a buffer containing the data to write. |
| |
| @return The parameter of Size. |
| |
| **/ |
| UINTN |
| EFIAPI |
| PciSegmentWriteBuffer ( |
| IN UINT64 StartAddress, |
| IN UINTN Size, |
| IN VOID *Buffer |
| ); |
| |
| #endif |