src/southbridge/amd/agesa/hudson/hudson.c

/* SPDX-License-Identifier: GPL-2.0-only */

#include <amdblocks/acpimmio.h>
#include <console/console.h>
#include <device/mmio.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include "hudson.h"
#include "imc.h"
#include "smbus.h"
#include "smi.h"

#define PM_REG_USB_ENABLE	0xef

enum usb_enable {
	USB_EN_DEVFN_12_0 = (1 << 0),
	USB_EN_DEVFN_12_2 = (1 << 1),
	USB_EN_DEVFN_13_0 = (1 << 2),
	USB_EN_DEVFN_13_2 = (1 << 3),
	USB_EN_DEVFN_16_0 = (1 << 4),
	USB_EN_DEVFN_16_2 = (1 << 5),
};

static void hudson_disable_usb(u8 disable)
{
	u8 reg8;

	/* Bit 7 handles routing, 6 is reserved. we don't mess with those */
	disable &= 0x3f;

	reg8 = pm_read8(PM_REG_USB_ENABLE);
	reg8 &= ~disable;
	pm_write8(PM_REG_USB_ENABLE, reg8);
}

void hudson_enable(struct device *dev)
{
	printk(BIOS_DEBUG, "%s()\n", __func__);
	switch (dev->path.pci.devfn) {
	case PCI_DEVFN(0x14, 5):
		if (dev->enabled == 0) {
			u32 usb_device_id = pci_read_config16(dev, PCI_DEVICE_ID);
			u8 reg8;
			if (usb_device_id == PCI_DID_AMD_SB900_USB_20_5) {
				/* turn off and remove device 0:14.5 from PCI space */
				reg8 = pm_read8(0xef);
				reg8 &= ~(1 << 6);
				pm_write8(0xef, reg8);
			}
		}
		break;

	case PCI_DEVFN(0x14, 7):
		if (dev->enabled == 0) {
			u32 sd_device_id = pci_read_config16(dev, PCI_DEVICE_ID);
			/* turn off the SDHC controller in the PM reg */
			u8 reg8;
			if (sd_device_id == PCI_DID_AMD_HUDSON_SD) {
				reg8 = pm_read8(0xe7);
				reg8 &= ~(1 << 0);
				pm_write8(0xe7, reg8);
			} else if (sd_device_id == PCI_DID_AMD_YANGTZE_SD) {
				reg8 = pm_read8(0xe8);
				reg8 &= ~(1 << 0);
				pm_write8(0xe8, reg8);
			}
			/* remove device 0:14.7 from PCI space */
			reg8 = pm_read8(0xd3);
			reg8 &= ~(1 << 6);
			pm_write8(0xd3, reg8);
		}
		break;

	/* Make sure to disable other functions if function 0 is disabled */
	case PCI_DEVFN(0x12, 0):
		if (dev->enabled == 0)
			hudson_disable_usb(USB_EN_DEVFN_12_0);
		__fallthrough;
	case PCI_DEVFN(0x12, 2):
		if (dev->enabled == 0)
			hudson_disable_usb(USB_EN_DEVFN_12_2);
		break;
	case PCI_DEVFN(0x13, 0):
		if (dev->enabled == 0)
			hudson_disable_usb(USB_EN_DEVFN_13_0);
		__fallthrough;
	case PCI_DEVFN(0x13, 2):
		if (dev->enabled == 0)
			hudson_disable_usb(USB_EN_DEVFN_13_2);
		break;
	case PCI_DEVFN(0x16, 0):
		if (dev->enabled == 0)
			hudson_disable_usb(USB_EN_DEVFN_16_0);
		__fallthrough;
	case PCI_DEVFN(0x16, 2):
		if (dev->enabled == 0)
			hudson_disable_usb(USB_EN_DEVFN_16_2);
		break;
	default:
		break;
	}
}

static void hudson_init_acpi_ports(void)
{
	/* We use some of these ports in SMM regardless of whether or not
	 * ACPI tables are generated. Enable these ports indiscriminately.
	 */

	pm_write16(0x60, ACPI_PM_EVT_BLK);
	pm_write16(0x62, ACPI_PM1_CNT_BLK);
	pm_write16(0x64, ACPI_PM_TMR_BLK);
	pm_write16(0x68, ACPI_GPE0_BLK);
	/* CpuControl is in \_PR.CP00, 6 bytes */
	pm_write16(0x66, ACPI_CPU_CONTROL);

	if (CONFIG(HAVE_SMI_HANDLER)) {
		pm_write16(0x6a, ACPI_SMI_CTL_PORT);
		hudson_enable_acpi_cmd_smi();
	} else {
		pm_write16(0x6a, 0);
	}

	/* AcpiDecodeEnable, When set, SB uses the contents of the PM registers
	 * at index 60-6B to decode ACPI I/O address. AcpiSmiEn & SmiCmdEn
	 */
	pm_write8(0x74, 1<<0 | 1<<1 | 1<<4 | 1<<2);
}

static void hudson_init(void *chip_info)
{
	hudson_init_acpi_ports();
}

static void hudson_final(void *chip_info)
{
	/* AMD AGESA does not enable thermal zone, so we enable it here. */
	if (CONFIG(HUDSON_IMC_FWM) &&
			!CONFIG(ACPI_ENABLE_THERMAL_ZONE))
		enable_imc_thermal_zone();
}

struct chip_operations southbridge_amd_agesa_hudson_ops = {
	CHIP_NAME("ATI HUDSON")
	.enable_dev = hudson_enable,
	.init = hudson_init,
	.final = hudson_final
};