blob: ad3d8e9200346cf7ecb878fa844fe1382941e685 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
#include <console/console.h>
#include <device/device.h>
#include <device/azalia_device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <device/mmio.h>
#include <soc/pch.h>
#include <soc/rcba.h>
#include <southbridge/intel/lynxpoint/hda_verb.h>
static void hda_pch_init(struct device *dev, u8 *base)
{
u8 reg8;
u16 reg16;
u32 reg32;
if (RCBA32(0x2030) & (1 << 31)) {
reg32 = pci_read_config32(dev, 0x120);
reg32 &= 0xf8ffff01;
reg32 |= (1 << 25);
reg32 |= RCBA32(0x2030) & 0xfe;
pci_write_config32(dev, 0x120, reg32);
} else
printk(BIOS_DEBUG, "HDA: V1CTL disabled.\n");
reg32 = pci_read_config32(dev, 0x114);
reg32 &= ~0xfe;
pci_write_config32(dev, 0x114, reg32);
// Set VCi enable bit
if (pci_read_config32(dev, 0x120) & ((1 << 24) |
(1 << 25) | (1 << 26))) {
reg32 = pci_read_config32(dev, 0x120);
reg32 &= ~(1 << 31);
pci_write_config32(dev, 0x120, reg32);
}
/* Additional programming steps */
reg32 = pci_read_config32(dev, 0xc4);
reg32 |= (1 << 24);
pci_write_config32(dev, 0xc4, reg32);
reg8 = pci_read_config8(dev, 0x4d); // Docking Status
reg8 &= ~(1 << 7); // Docking not supported
pci_write_config8(dev, 0x4d, reg8);
reg16 = read32(base + 0x0012);
reg16 |= (1 << 0);
write32(base + 0x0012, reg16);
/* disable Auto Voltage Detector */
reg8 = pci_read_config8(dev, 0x42);
reg8 |= (1 << 2);
pci_write_config8(dev, 0x42, reg8);
}
static void hda_init(struct device *dev)
{
u8 *base;
struct resource *res;
u32 codec_mask;
/* Find base address */
res = probe_resource(dev, PCI_BASE_ADDRESS_0);
if (!res)
return;
base = res2mmio(res, 0, 0);
printk(BIOS_DEBUG, "HDA: base = %p\n", base);
/* Set Bus Master */
pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER);
hda_pch_init(dev, base);
codec_mask = hda_codec_detect(base);
if (codec_mask) {
printk(BIOS_DEBUG, "HDA: codec_mask = %02x\n", codec_mask);
azalia_codecs_init(base, codec_mask);
}
}
static void hda_enable(struct device *dev)
{
u16 reg16;
u8 reg8;
reg8 = pci_read_config8(dev, 0x43);
reg8 |= 0x6f;
pci_write_config8(dev, 0x43, reg8);
if (!dev->enabled) {
/* Route I/O buffers to ADSP function */
reg8 = pci_read_config8(dev, 0x42);
reg8 |= (1 << 7) | (1 << 6);
pci_write_config8(dev, 0x42, reg8);
printk(BIOS_INFO, "HDA disabled, I/O buffers routed to ADSP\n");
/* Ensure memory, io, and bus master are all disabled */
reg16 = pci_read_config16(dev, PCI_COMMAND);
reg16 &= ~(PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
pci_write_config16(dev, PCI_COMMAND, reg16);
/* Disable this device */
pch_disable_devfn(dev);
}
}
static void hda_final(struct device *dev)
{
/* Set HDCFG.BCLD */
pci_or_config16(dev, 0x40, 1 << 1);
}
static struct device_operations hda_ops = {
.read_resources = &pci_dev_read_resources,
.set_resources = &pci_dev_set_resources,
.enable_resources = &pci_dev_enable_resources,
.init = &hda_init,
.enable = &hda_enable,
.final = &hda_final,
.ops_pci = &pci_dev_ops_pci,
};
static const unsigned short pci_device_ids[] = {
0x9c20, /* LynxPoint-LP */
0x9ca0, /* WildcatPoint */
0
};
static const struct pci_driver pch_hda __pci_driver = {
.ops = &hda_ops,
.vendor = PCI_VID_INTEL,
.devices = pci_device_ids,
};