| fw_config |
| field AUDIO 8 10 |
| option NONE 0 |
| option ADL_MAX98373_ALC5682I_I2S 1 |
| end |
| end |
| chip soc/intel/alderlake |
| |
| device cpu_cluster 0 on |
| device lapic 0 on end |
| end |
| |
| # GPE configuration |
| # Note that GPE events called out in ASL code rely on this |
| # route. i.e. If this route changes then the affected GPE |
| # offset bits also need to be changed. |
| register "pmc_gpe0_dw0" = "GPP_B" |
| register "pmc_gpe0_dw1" = "GPP_D" |
| register "pmc_gpe0_dw2" = "GPP_E" |
| |
| # FSP configuration |
| register "usb2_ports[0]" = "USB2_PORT_MID(OC1)" # Type-C port 0 |
| register "usb2_ports[1]" = "USB2_PORT_MID(OC1)" # Type-C port 1 |
| register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WLAN |
| register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A port 1 |
| register "usb2_ports[5]" = "USB2_PORT_MID(OC2)" # Type-A port 2 |
| register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port1 |
| register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port2 |
| register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # USB3/2 Type A port3 |
| register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A port 1 |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # Type-A port 2 |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WLAN |
| |
| # Sagv Configuration |
| register "SaGv" = "SaGv_Enabled" |
| |
| # Enable CNVi Bluetooth |
| register "CnviBtCore" = "true" |
| |
| # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f |
| register "gen1_dec" = "0x00fc0801" |
| register "gen2_dec" = "0x000c0201" |
| # EC memory map range is 0x900-0x9ff |
| register "gen3_dec" = "0x00fc0901" |
| |
| #Enable PCH PCIE RP 4 using CLK 5 |
| register "pch_pcie_rp[PCH_RP(4)]" = "{ |
| .clk_src = 5, |
| .clk_req = 5, |
| .flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| }" |
| |
| # Enable PCH PCIE RP 5 using CLK 2 |
| register "pch_pcie_rp[PCH_RP(5)]" = "{ |
| .clk_src = 2, |
| .clk_req = 2, |
| .flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| }" |
| |
| # Enable PCH PCIE RP 9 using CLK 3 |
| register "pch_pcie_rp[PCH_RP(9)]" = "{ |
| .clk_src = 3, |
| .clk_req = 3, |
| .flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| }" |
| |
| #Enable PCH PCIE RP 10 using CLK 1 |
| register "pch_pcie_rp[PCH_RP(10)]" = "{ |
| .clk_src = 1, |
| .clk_req = 1, |
| .flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| }" |
| |
| # Hybrid storage mode |
| register "HybridStorageMode" = "1" |
| |
| # Enable CPU PCIE RP 1 using CLK 0 |
| register "cpu_pcie_rp[CPU_RP(1)]" = "{ |
| .clk_req = 0, |
| .clk_src = 0, |
| .flags = PCIE_RP_LTR | PCIE_RP_AER, |
| }" |
| |
| # Enable EDP in PortA |
| register "DdiPortAConfig" = "1" |
| # Enable HDMI in Port B |
| register "ddi_ports_config" = "{ |
| [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, |
| }" |
| |
| # TCSS USB3 |
| register "TcssAuxOri" = "0" |
| |
| register "s0ix_enable" = "1" |
| |
| register "SerialIoI2cMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C3] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C4] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C5] = PchSerialIoPci, |
| }" |
| |
| register "SerialIoGSpiMode" = "{ |
| [PchSerialIoIndexGSPI0] = PchSerialIoPci, |
| [PchSerialIoIndexGSPI1] = PchSerialIoPci, |
| [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, |
| [PchSerialIoIndexGSPI3] = PchSerialIoDisabled, |
| }" |
| |
| register "SerialIoGSpiCsMode" = "{ |
| [PchSerialIoIndexGSPI0] = 0, |
| [PchSerialIoIndexGSPI1] = 1, |
| [PchSerialIoIndexGSPI2] = 0, |
| [PchSerialIoIndexGSPI3] = 0, |
| }" |
| |
| register "SerialIoGSpiCsState" = "{ |
| [PchSerialIoIndexGSPI0] = 0, |
| [PchSerialIoIndexGSPI1] = 0, |
| [PchSerialIoIndexGSPI2] = 0, |
| [PchSerialIoIndexGSPI3] = 0, |
| }" |
| |
| register "SerialIoUartMode" = "{ |
| [PchSerialIoIndexUART0] = PchSerialIoSkipInit, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoDisabled, |
| }" |
| |
| # HD Audio |
| register "PchHdaDspEnable" = "1" |
| register "PchHdaIDispLinkTmode" = "HDA_TMODE_8T" |
| register "PchHdaIDispLinkFrequency" = "HDA_LINKFREQ_96MHZ" |
| register "PchHdaIDispCodecEnable" = "1" |
| |
| # Intel Common SoC Config |
| register "common_soc_config" = "{ |
| .gspi[1] = { |
| .speed_mhz = 1, |
| .early_init = 1, |
| }, |
| .i2c[0] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| .i2c[1] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| .i2c[2] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| .i2c[3] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| .i2c[5] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| }" |
| |
| device domain 0 on |
| device ref pcie5 on end |
| device ref igpu on end |
| device ref dtt on end |
| device ref ipu on |
| chip drivers/intel/mipi_camera |
| register "acpi_uid" = "0x50000" |
| register "acpi_name" = ""IPU0"" |
| register "device_type" = "INTEL_ACPI_CAMERA_CIO2" |
| |
| register "cio2_num_ports" = "2" |
| register "cio2_lanes_used" = "{2,2}" |
| register "cio2_lane_endpoint[0]" = ""^I2C5.CAM1"" |
| register "cio2_lane_endpoint[1]" = ""^I2C1.CAM0"" |
| register "cio2_prt[0]" = "2" |
| register "cio2_prt[1]" = "1" |
| device generic 0 on end |
| end |
| end |
| device ref pcie4_0 on end |
| device ref pcie4_1 on end |
| device ref tbt_pcie_rp0 on end |
| device ref tbt_pcie_rp1 on end |
| device ref tcss_xhci on |
| chip drivers/usb/acpi |
| register "type" = "UPC_TYPE_HUB" |
| device ref tcss_root_hub on |
| chip drivers/usb/acpi |
| register "desc" = ""TypeC Port 1"" |
| device ref tcss_usb3_port1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""TypeC Port 2"" |
| device ref tcss_usb3_port2 on end |
| end |
| end |
| end |
| end |
| device ref tcss_dma0 on end |
| device ref xhci on |
| chip drivers/usb/acpi |
| register "desc" = ""Root Hub"" |
| register "type" = "UPC_TYPE_HUB" |
| device ref xhci_root_hub on |
| chip drivers/usb/acpi |
| register "desc" = ""Bluetooth"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device ref usb2_port10 on end |
| end |
| end |
| end |
| end |
| device ref cnvi_wifi on |
| chip drivers/wifi/generic |
| register "wake" = "GPE0_PME_B0" |
| device generic 0 on end |
| end |
| end |
| device ref i2c0 on |
| chip drivers/i2c/generic |
| register "hid" = ""10EC5682"" |
| register "name" = ""RT58"" |
| register "desc" = ""Headset Codec"" |
| register "irq" = "ACPI_IRQ_EDGE_HIGH(GPP_H3_IRQ)" |
| # Set the jd_src to RT5668_JD1 for jack detection |
| register "property_count" = "1" |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| device i2c 1a on |
| probe AUDIO ADL_MAX98373_ALC5682I_I2S |
| end |
| end |
| chip drivers/i2c/max98373 |
| register "vmon_slot_no" = "0" |
| register "imon_slot_no" = "1" |
| register "uid" = "0" |
| register "desc" = ""Right Speaker Amp"" |
| register "name" = ""MAXR"" |
| device i2c 31 on |
| probe AUDIO ADL_MAX98373_ALC5682I_I2S |
| end |
| end |
| chip drivers/i2c/max98373 |
| register "vmon_slot_no" = "2" |
| register "imon_slot_no" = "3" |
| register "uid" = "1" |
| register "desc" = ""Left Speaker Amp"" |
| register "name" = ""MAXL"" |
| device i2c 32 on |
| probe AUDIO ADL_MAX98373_ALC5682I_I2S |
| end |
| end |
| chip drivers/i2c/hid |
| register "generic.hid" = ""WACOM PWB-D893"" |
| register "generic.desc" = ""WACOM Touchscreen"" |
| register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F18_IRQ)" |
| register "generic.probed" = "1" |
| register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F17)" |
| register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F7)" |
| register "generic.enable_delay_ms" = "1" |
| register "generic.reset_delay_ms" = "300" |
| register "generic.has_power_resource" = "1" |
| register "generic.disable_gpio_export_in_crs" = "1" |
| register "hid_desc_reg_offset" = "0x01" |
| device i2c 0a on end |
| end |
| chip drivers/i2c/hid |
| register "generic.hid" = ""ELAN0000"" |
| register "generic.desc" = ""ELAN Touchpad"" |
| register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_D11_IRQ)" |
| register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H1)" |
| register "generic.wake" = "GPE0_DW1_11" |
| register "generic.probed" = "1" |
| register "generic.has_power_resource" = "1" |
| device i2c 15 on end |
| end |
| end |
| device ref i2c1 on |
| chip drivers/intel/mipi_camera |
| register "acpi_hid" = ""OVTI5675"" |
| register "acpi_uid" = "0" |
| register "acpi_name" = ""CAM0"" |
| register "chip_name" = ""Ov 5675 Camera"" |
| register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" |
| |
| register "ssdb.lanes_used" = "2" |
| register "ssdb.vcm_type" = "0x0C" |
| register "vcm_name" = ""VCM0"" |
| register "num_freq_entries" = "1" |
| register "link_freq[0]" = "450000000" |
| register "remote_name" = ""IPU0"" |
| |
| register "has_power_resource" = "1" |
| #Controls |
| register "clk_panel.clks[0].clknum" = "0" #IMGCLKOUT_0 |
| register "clk_panel.clks[0].freq" = "1" #19.2 Mhz |
| register "gpio_panel.gpio[0].gpio_num" = "GPP_B23" #power_enable |
| register "gpio_panel.gpio[1].gpio_num" = "GPP_R5" #reset |
| |
| #_ON |
| register "on_seq.ops_cnt" = "4" |
| register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" |
| register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)" |
| register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)" |
| register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)" |
| |
| #_OFF |
| register "off_seq.ops_cnt" = "3" |
| register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" |
| register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" |
| register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" |
| |
| device i2c 36 on end |
| end |
| chip drivers/intel/mipi_camera |
| register "acpi_uid" = "3" |
| register "acpi_name" = ""VCM0"" |
| register "chip_name" = ""DW AF VCM"" |
| register "device_type" = "INTEL_ACPI_CAMERA_VCM" |
| |
| register "pr0" = ""\\_SB.PCI0.I2C1.CAM0.PRIC"" |
| register "vcm_compat" = ""dongwoon,dw9714"" |
| |
| device i2c 0C on end |
| end |
| end |
| device ref i2c2 on end |
| device ref i2c3 on end |
| device ref heci1 on end |
| device ref sata on end |
| device ref i2c5 on |
| chip drivers/intel/mipi_camera |
| register "acpi_hid" = ""OVTI5675"" |
| register "acpi_uid" = "0" |
| register "acpi_name" = ""CAM1"" |
| register "chip_name" = ""Ov 5675 Camera"" |
| register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" |
| |
| register "ssdb.lanes_used" = "2" |
| register "num_freq_entries" = "1" |
| register "link_freq[0]" = "450000000" |
| register "remote_name" = ""IPU0"" |
| |
| register "has_power_resource" = "1" |
| #Controls |
| register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 |
| register "clk_panel.clks[0].freq" = "1" #19.2 Mhz |
| register "gpio_panel.gpio[0].gpio_num" = "GPP_E16" #power_enable |
| register "gpio_panel.gpio[1].gpio_num" = "GPP_E15" #reset |
| |
| #_ON |
| register "on_seq.ops_cnt" = "4" |
| register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" |
| register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)" |
| register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)" |
| register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)" |
| |
| #_OFF |
| register "off_seq.ops_cnt" = "3" |
| register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" |
| register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" |
| register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" |
| |
| device i2c 36 on end |
| end |
| end |
| device ref pcie_rp1 on end |
| device ref pcie_rp3 on end # W/A to FSP issue |
| device ref pcie_rp4 on end # W/A to FSP issue |
| device ref pcie_rp5 on end |
| device ref pcie_rp6 on end |
| device ref pcie_rp8 on end |
| device ref pcie_rp9 on end |
| device ref pcie_rp10 on end |
| device ref uart0 on end |
| device ref gspi0 on end |
| device ref p2sb on end |
| device pci 1e.3 on |
| chip drivers/spi/acpi |
| register "hid" = "ACPI_DT_NAMESPACE_HID" |
| register "compat_string" = ""google,cr50"" |
| register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E3_IRQ)" |
| device spi 0 on end |
| end |
| end # GSPI1 |
| device ref hda on |
| chip drivers/intel/soundwire |
| device generic 0 on |
| chip drivers/soundwire/alc711 |
| # SoundWire Link 0 ID 1 |
| register "desc" = ""Headset Codec"" |
| device generic 0.1 on end |
| end |
| end |
| end |
| end |
| device ref smbus on end |
| end |
| end |