| chip soc/intel/cannonlake |
| register "power_limits_config" = "{ |
| .tdp_pl1_override = 13, |
| .tdp_pl2_override = 64, |
| }" |
| |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoPci, |
| [PchSerialIoIndexI2C3] = PchSerialIoPci, |
| [PchSerialIoIndexI2C4] = PchSerialIoPci, |
| [PchSerialIoIndexI2C5] = PchSerialIoPci, |
| [PchSerialIoIndexSPI0] = PchSerialIoPci, |
| [PchSerialIoIndexSPI1] = PchSerialIoPci, |
| [PchSerialIoIndexSPI2] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART0] = PchSerialIoSkipInit, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoDisabled, |
| }" |
| |
| # Enable Root port 9(x2) for NVMe. |
| register "PcieRpEnable[8]" = "1" |
| register "PcieRpLtrEnable[8]" = "1" |
| # RP 9 uses CLK SRC 1 |
| register "PcieClkSrcUsage[1]" = "8" |
| # ClkReq-to-ClkSrc mapping for CLK SRC 1 |
| register "PcieClkSrcClkReq[1]" = "1" |
| |
| # Enable Root port 11(x2) for NVMe. |
| register "PcieRpEnable[10]" = "1" |
| register "PcieRpLtrEnable[10]" = "1" |
| # RP 11 uses CLK SRC 2 |
| register "PcieClkSrcUsage[2]" = "10" |
| # ClkReq-to-ClkSrc mapping for CLK SRC 2 |
| register "PcieClkSrcClkReq[2]" = "1" |
| |
| # No PCIe WiFi |
| register "PcieRpEnable[13]" = "0" |
| |
| # Intel Common SoC Config |
| #+-------------------+---------------------------+ |
| #| Field | Value | |
| #+-------------------+---------------------------+ |
| #| GSPI1 | FP MCU | |
| #| I2C0 | Trackpad | |
| #| I2C1 | Touchscreen | |
| #| I2C4 | Audio | |
| #+-------------------+---------------------------+ |
| register "common_soc_config" = "{ |
| .i2c[0] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 50, |
| .fall_time_ns = 15, |
| .data_hold_time_ns = 330, |
| }, |
| .i2c[1] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 60, |
| .fall_time_ns = 25, |
| }, |
| .i2c[3] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 150, |
| .fall_time_ns = 150, |
| }, |
| .i2c[4] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 120, |
| .fall_time_ns = 120, |
| }, |
| .gspi[0] = { |
| .speed_mhz = 1, |
| .early_init = 1, |
| }, |
| }" |
| |
| device domain 0 on |
| device pci 02.0 on # Integrated Graphics Device |
| register "gfx" = "GMA_DEFAULT_PANEL(0)" |
| end |
| device pci 14.0 on |
| chip drivers/usb/acpi |
| device usb 0.0 on |
| chip drivers/usb/acpi |
| # No Type-A port |
| device usb 2.2 off end |
| end |
| chip drivers/usb/acpi |
| # No Type-A Port |
| device usb 2.3 off end |
| end |
| chip drivers/usb/acpi |
| # No WWAN |
| device usb 2.5 off end |
| end |
| chip drivers/usb/acpi |
| # No WWAN |
| device usb 3.4 off end |
| end |
| end |
| end |
| end |
| |
| # Native SD Card interface unused |
| device pci 14.5 off end |
| |
| device pci 15.0 on |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0000"" |
| register "desc" = ""ELAN Touchpad"" |
| register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_A21_IRQ)" |
| register "wake" = "GPE0_DW0_21" |
| device i2c 15 on end |
| end |
| end |
| |
| device pci 15.1 on |
| chip drivers/i2c/hid |
| register "generic.hid" = ""GDIX0000"" |
| register "generic.desc" = ""Goodix Touchscreen"" |
| register "generic.irq" = |
| "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" |
| register "generic.probed" = "1" |
| register "generic.reset_gpio" = |
| "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" |
| register "generic.reset_delay_ms" = "500" |
| register "generic.reset_off_delay_ms" = "1" |
| register "generic.enable_gpio" = |
| "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" |
| register "generic.enable_delay_ms" = "10" |
| register "generic.enable_off_delay_ms" = "1" |
| register "generic.has_power_resource" = "1" |
| register "hid_desc_reg_offset" = "0x01" |
| device i2c 5d on end |
| end |
| chip drivers/generic/gpio_keys |
| register "name" = ""PENH"" |
| register "gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A8)" |
| register "key.wake_gpe" = "GPE0_DW0_08" |
| register "key.wakeup_route" = "WAKEUP_ROUTE_SCI" |
| register "key.wakeup_event_action" = "EV_ACT_ASSERTED" |
| register "key.dev_name" = ""EJCT"" |
| register "key.linux_code" = "SW_PEN_INSERTED" |
| register "key.linux_input_type" = "EV_SW" |
| register "key.label" = ""pen_eject"" |
| device generic 0 on end |
| end |
| end # I2C 1 |
| |
| # I2C #2 unused |
| device pci 15.2 off end |
| |
| # I2C #3 unused |
| device pci 15.3 off end |
| |
| device pci 19.0 on |
| chip drivers/i2c/generic |
| register "hid" = ""10EC5682"" |
| register "name" = ""RT58"" |
| register "desc" = ""Realtek RT5682"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" |
| register "property_count" = "1" |
| # Set the jd_src to RT5668_JD1 for jack detection |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| device i2c 1a on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1011"" |
| register "desc" = ""RT1011 Tweeter Left Speaker Amp"" |
| register "uid" = "0" |
| register "name" = ""TL"" |
| device i2c 38 on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1011"" |
| register "desc" = ""RT1011 Tweeter Right Speaker Amp"" |
| register "uid" = "1" |
| register "name" = ""TR"" |
| device i2c 39 on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1011"" |
| register "desc" = ""RT1011 Woofer Left Speaker Amp"" |
| register "uid" = "2" |
| register "name" = ""WL"" |
| device i2c 3a on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1011"" |
| register "desc" = ""RT1011 Woofer Right Speaker Amp"" |
| register "uid" = "3" |
| register "name" = ""WR"" |
| device i2c 3b on end |
| end |
| end #I2C #4 |
| |
| device pci 1d.0 on end # PCI Express Port 9 (X2 NVMe) |
| device pci 1d.2 on end # PCI Express Port 11 (X2 NVMe) |
| |
| device pci 1e.3 on |
| chip drivers/spi/acpi |
| register "name" = ""CRFP"" |
| register "hid" = "ACPI_DT_NAMESPACE_HID" |
| register "uid" = "1" |
| register "compat_string" = ""google,cros-ec-spi"" |
| register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_A23_IRQ)" |
| register "wake" = "GPE0_DW0_23" |
| device spi 1 on end |
| end # FPMCU |
| end # GSPI #1 |
| device pci 1f.3 on |
| chip drivers/generic/max98357a |
| register "hid" = ""MX98357A"" |
| register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H3)" |
| register "sdmode_delay" = "5" |
| device generic 0 on end |
| end |
| end # Intel HDA |
| end |
| end |