/* SPDX-License-Identifier: GPL-2.0-only */ | |
/* | |
* Pseudo device that contains methods to modify Opregion | |
* "Mailbox 3 BIOS to Driver Notification" | |
* The BIOS to Driver Notification mailbox is intended to support | |
* BIOS to Driver event notification or data storage for BIOS to | |
* Driver data synchronization purpose. | |
*/ | |
Device (BOX3) | |
{ | |
Name (_ADR, 0) | |
OperationRegion (OPRG, SystemMemory, ASLS, 0x2000) | |
Field (OPRG, DWordAcc, NoLock, Preserve) | |
{ | |
// OpRegion Header | |
Offset (0x58), | |
MBOX, 32, | |
// Mailbox 3 | |
Offset (0x300), | |
ARDY, 1, /* Offset 0 Driver readiness */ | |
, 31, | |
ASLC, 32, /* Offset 4 ASLE interrupt command / status */ | |
TCHE, 32, /* Offset 8 Technology enabled indicator */ | |
ALSI, 32, /* Offset 12 Current ALS illuminance reading */ | |
BCLP, 32, /* Offset 16 Backlight britness to set */ | |
PFIT, 32, /* Offset 20 Panel fitting Request */ | |
CBLV, 32, /* Offset 24 Brightness Current State */ | |
} | |
/* | |
* Request back-light brightness change through mailbox 3 | |
* | |
* @param Arg0 The brightness level to set in percent | |
* @Return Zero on success, Ones on failure | |
* Errors: * ASLS is zero | |
* * Mailbox 3 support not advertised | |
* * Driver not loaded or not ready | |
* * Driver reported an error during ASLE IRQ | |
*/ | |
Method (XBCM, 1, Serialized) | |
{ | |
If (LEqual(ASLS, Zero)) | |
{ | |
Return (Ones) | |
} | |
If (LEqual(And(MBOX, 0x4), Zero)) | |
{ | |
Return (Ones) | |
} | |
/* Always keep BCLP up to date, even if driver is not ready. | |
It requires a full 8-bit brightness value. 255 = 100% */ | |
Store (Arg0 * 255 / 100, Local1) | |
If (LGreater(Local1, 255)) { | |
Store (255, Local1) | |
} | |
/* also set valid bit */ | |
Store (Or (Local1, 0x80000000), BCLP) | |
If (LEqual(ARDY, Zero)) | |
{ | |
Return (Ones) | |
} | |
/* Request back-light change */ | |
Store (0x2, ASLC) | |
/* Trigger IRQ */ | |
Store (0x1, ASLE) | |
Store (0x20, Local0) | |
While (LGreater(Local0, Zero)) | |
{ | |
Sleep (1) | |
If (LEqual (And (ASLC, 0x2), 0)) { | |
/* Request has been processed, check status: */ | |
And (ShiftRight (ASLC, 12), 0x3, Local1) | |
If (LEqual (Local1, 0)) { | |
Return (Zero) | |
} Else { | |
Return (Ones) | |
} | |
} | |
Local0-- | |
} | |
Return (Ones) | |
} | |
} | |
/* | |
* Pseudo device that contains methods to operate on GTT memory | |
*/ | |
Device (LEGA) | |
{ | |
Name (_ADR, 0) | |
/* Divide round closest */ | |
Method (DRCL, 2) | |
{ | |
Return ((Arg0 + Arg1 / 2) / Arg1) | |
} | |
Method (XBCM, 1, NotSerialized) | |
{ | |
Store (DRCL (Arg0 * BCLM, 100), BCLV) | |
} | |
/* Find value closest to BCLV in BRIG (which must be ordered) */ | |
Method (XBQC, 0, NotSerialized) | |
{ | |
/* Prevent DivideByZero if backlight control isn't enabled */ | |
If (BCLM == 0) | |
{ | |
Return (Zero) | |
} | |
/* Local0: current percentage */ | |
Store (DRCL (BCLV * 100, BCLM), Local0) | |
/* Local1: loop index (selectable values start at 2 in BRIG) */ | |
Store (2, Local1) | |
While (LLess (Local1, SizeOf (BRIG) - 1)) { | |
/* Local[23]: adjacent values in BRIG */ | |
Store (DeRefOf (BRIG[Local1]), Local2) | |
Store (DeRefOf (BRIG[Local1 + 1]), Local3) | |
If (LLess (Local0, Local3)) { | |
If (LLess (Local0, Local2) || LLess (Local0 - Local2, Local3 - Local0)) { | |
Return (Local2) | |
} Else { | |
Return (Local3) | |
} | |
} | |
Local1++ | |
} | |
/* Didn't find greater/equal value: use the last */ | |
Return (Local3) | |
} | |
} | |
Method (XBCM, 1, NotSerialized) | |
{ | |
If (LEqual(^BOX3.XBCM (Arg0), Ones)) | |
{ | |
^LEGA.XBCM (Arg0) | |
} | |
} | |
Method (XBQC, 0, NotSerialized) | |
{ | |
/* | |
* Always query the hardware directly. Not all OS drivers | |
* keep CBLV up to date (one is Linux' i915). Some years | |
* after that is fixed we can probably use CBLV? | |
*/ | |
Return (^LEGA.XBQC ()) | |
} |