| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| #include <gpio.h> |
| #include <intelblocks/pcr.h> |
| #include <soc/pcr_ids.h> |
| #include <soc/pmc.h> |
| |
| static const struct reset_mapping rst_map[] = { |
| { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 0U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 }, |
| }; |
| |
| static const struct reset_mapping rst_map_gpd[] = { |
| { .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 3U << 30 }, |
| }; |
| |
| /* |
| * The GPIO driver for Elkhartlake on Windows/Linux expects 32 GPIOs per pad |
| * group, regardless of whether or not there is a physical pad for each |
| * exposed GPIO number. |
| * |
| * This results in the OS having a sparse GPIO map, and devices that need |
| * to export an ACPI GPIO must use the OS expected number. |
| * |
| * Not all pins are usable as GPIO and those groups do not have a pad base. |
| * |
| * This layout matches the Linux kernel pinctrl map for MCC at: |
| * linux/drivers/pinctrl/intel/pinctrl-elkhartlake.c |
| */ |
| static const struct pad_group ehl_community0_groups[] = { |
| INTEL_GPP_BASE(GPP_B0, GPP_B0, GPP_B23, 0), /* GPP_B */ |
| INTEL_GPP(GPP_B0, GPIO_RSVD_0, GPIO_RSVD_1), |
| INTEL_GPP_BASE(GPP_B0, GPP_T0, GPP_T15, 32), /* GPP_T */ |
| INTEL_GPP_BASE(GPP_B0, GPP_G0, GPIO_RSVD_2, 64), /* GPP_G */ |
| }; |
| |
| static const struct pad_group ehl_community1_groups[] = { |
| INTEL_GPP_BASE(GPP_V0, GPP_V0, GPP_V15, 96), /* GPP_V */ |
| INTEL_GPP_BASE(GPP_V0, GPP_H0, GPP_H23, 128), /* GPP_H */ |
| INTEL_GPP_BASE(GPP_V0, GPP_D0, GPIO_RSVD_3, 160), /* GPP_D */ |
| INTEL_GPP_BASE(GPP_V0, GPP_U0, GPP_U19, 192), /* GPP_U */ |
| INTEL_GPP(GPP_V0, GPIO_RSVD_4, GPIO_RSVD_7), |
| INTEL_GPP_BASE(GPP_V0, VGPIO_0, VGPIO_39, 224), /* VGPIO */ |
| }; |
| |
| /* This community is not visible to the OS */ |
| static const struct pad_group ehl_community2_groups[] = { |
| INTEL_GPP(GPD0, GPD0, GPIO_RSVD_12), /* GPD */ |
| }; |
| |
| static const struct pad_group ehl_community3_groups[] = { |
| INTEL_GPP(GPIO_RSVD_13, GPIO_RSVD_13, GPIO_RSVD_29), |
| INTEL_GPP_BASE(GPIO_RSVD_13, GPP_S0, GPP_S1, 288), /* GPP_S */ |
| INTEL_GPP_BASE(GPIO_RSVD_13, GPP_A0, GPP_A23, 320), /* GPP_A */ |
| INTEL_GPP(GPIO_RSVD_13, VGPIO_USB_0, VGPIO_USB_3), |
| }; |
| |
| static const struct pad_group ehl_community4_groups[] = { |
| INTEL_GPP_BASE(GPP_C0, GPP_C0, GPP_C23, 352), /* GPP_C */ |
| INTEL_GPP_BASE(GPP_C0, GPP_F0, GPP_F23, 384), /* GPP_F */ |
| INTEL_GPP(GPP_C0, GPIO_RSVD_30, GPIO_RSVD_36), |
| INTEL_GPP_BASE(GPP_C0, GPP_E0, GPP_E23, 416), /* GPP_E */ |
| }; |
| |
| static const struct pad_group ehl_community5_groups[] = { |
| INTEL_GPP_BASE(GPP_R0, GPP_R0, GPP_R7, 448), /* GPP_R */ |
| }; |
| |
| static const struct pad_community ehl_communities[TOTAL_GPIO_COMM] = { |
| /* GPP B, T, G */ |
| [COMM_0] = { |
| .port = PID_GPIOCOM0, |
| .first_pad = GPIO_COM0_START, |
| .last_pad = GPIO_COM0_END, |
| .num_gpi_regs = NUM_GPIO_COM0_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0, |
| .gpi_nmi_en_reg_0 = GPI_NMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPP_BTG", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = ehl_community0_groups, |
| .num_groups = ARRAY_SIZE(ehl_community0_groups), |
| }, |
| /* GPP V, H, D, U, VGPIO */ |
| [COMM_1] = { |
| .port = PID_GPIOCOM1, |
| .first_pad = GPIO_COM1_START, |
| .last_pad = GPIO_COM1_END, |
| .num_gpi_regs = NUM_GPIO_COM1_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0, |
| .gpi_nmi_en_reg_0 = GPI_NMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPP_VHDU", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = ehl_community1_groups, |
| .num_groups = ARRAY_SIZE(ehl_community1_groups), |
| }, |
| /* GPD */ |
| [COMM_2] = { |
| .port = PID_GPIOCOM2, |
| .first_pad = GPIO_COM2_START, |
| .last_pad = GPIO_COM2_END, |
| .num_gpi_regs = NUM_GPIO_COM2_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPD", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map_gpd, |
| .num_reset_vals = ARRAY_SIZE(rst_map_gpd), |
| .groups = ehl_community2_groups, |
| .num_groups = ARRAY_SIZE(ehl_community2_groups), |
| }, |
| /* GPP S, A */ |
| [COMM_3] = { |
| .port = PID_GPIOCOM3, |
| .first_pad = GPIO_COM3_START, |
| .last_pad = GPIO_COM3_END, |
| .num_gpi_regs = NUM_GPIO_COM3_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0, |
| .gpi_nmi_en_reg_0 = GPI_NMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPP_SA", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = ehl_community3_groups, |
| .num_groups = ARRAY_SIZE(ehl_community3_groups), |
| }, |
| /* GPP C, F, E */ |
| [COMM_4] = { |
| .port = PID_GPIOCOM4, |
| .first_pad = GPIO_COM4_START, |
| .last_pad = GPIO_COM4_END, |
| .num_gpi_regs = NUM_GPIO_COM4_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0, |
| .gpi_nmi_en_reg_0 = GPI_NMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPP_CFE", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = ehl_community4_groups, |
| .num_groups = ARRAY_SIZE(ehl_community4_groups), |
| }, |
| /* GPP R*/ |
| [COMM_5] = { |
| .port = PID_GPIOCOM5, |
| .first_pad = GPIO_COM5_START, |
| .last_pad = GPIO_COM5_END, |
| .num_gpi_regs = NUM_GPIO_COM5_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0, |
| .gpi_nmi_en_reg_0 = GPI_NMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPP_RR", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = ehl_community5_groups, |
| .num_groups = ARRAY_SIZE(ehl_community5_groups), |
| } |
| }; |
| |
| const struct pad_community *soc_gpio_get_community(size_t *num_communities) |
| { |
| *num_communities = ARRAY_SIZE(ehl_communities); |
| return ehl_communities; |
| } |
| |
| const struct pmc_to_gpio_route *soc_pmc_gpio_routes(size_t *num) |
| { |
| static const struct pmc_to_gpio_route routes[] = { |
| { PMC_GPP_B, GPP_B }, |
| { PMC_GPP_T, GPP_T }, |
| { PMC_GPP_D, GPP_D }, |
| { PMC_GPP_A, GPP_A }, |
| { PMC_GPP_R, GPP_R }, |
| { PMC_GPP_V, GPP_V }, |
| { PMC_GPD, GPD }, |
| { PMC_GPP_H, GPP_H }, |
| { PMC_GPP_U, GPP_U }, |
| { PMC_VGPIO, VGPIO }, |
| { PMC_GPP_F, GPP_F }, |
| { PMC_GPP_C, GPP_C }, |
| { PMC_GPP_E, GPP_E }, |
| { PMC_GPP_G, GPP_G }, |
| { PMC_GPP_S, GPP_S } |
| }; |
| |
| *num = ARRAY_SIZE(routes); |
| return routes; |
| } |