| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| /* |
| * Include this file into a mainboard's DSDT _SB device tree and it will |
| * expose the IT8659E SuperIO and some of its functionality. |
| * |
| * It allows the change of IO ports, IRQs and DMA settings on logical |
| * devices, disabling and reenabling logical devices. |
| * |
| * LDN State |
| * 0x1 UARTA Implemented, tested |
| * 0x2 UARTB Implemented, tested |
| * 0x4 EC Implemented, tested |
| * 0x5 KBC Implemented, untested |
| * 0x6 MOUSE Implemented, untested |
| * 0x7 GPIO Implemented, tested |
| * 0xa CIR Not implemented |
| * |
| * Controllable through preprocessor defines: |
| * SUPERIO_DEV Device identifier for this SIO (e.g. SIO0) |
| * SUPERIO_PNP_BASE I/O address of the first PnP configuration register |
| * IT8659E_SHOW_UARTA If defined, UARTA will be exposed. |
| * IT8659E_SHOW_UARTB If defined, UARTB will be exposed. |
| * IT8659E_SHOW_KBC If defined, the KBC will be exposed. |
| * IT8659E_SHOW_PS2M If defined, PS/2 mouse support will be exposed. |
| * IT8659E_SHOW_EC If defined, the EC will be exposed. |
| * IT8659E_SHOW_GPIO If defined, the GPIO will be exposed. |
| */ |
| |
| #undef SUPERIO_CHIP_NAME |
| #define SUPERIO_CHIP_NAME IT8659E |
| #include <superio/acpi/pnp.asl> |
| |
| #undef PNP_DEFAULT_PSC |
| #define PNP_DEFAULT_PSC Return (0) /* no power management */ |
| |
| #define CONFIGURE_CONTROL CCTL |
| |
| Device (SUPERIO_DEV) { |
| Name (_HID, EisaId("PNP0A05")) |
| Name (_STR, Unicode("ITE IT8659E Super I/O")) |
| Name (_UID, SUPERIO_UID(SUPERIO_DEV,)) |
| |
| /* Mutex for accesses to the configuration ports */ |
| Mutex (CRMX, 1) |
| |
| /* SuperIO configuration ports */ |
| OperationRegion (CREG, SystemIO, SUPERIO_PNP_BASE, 0x02) |
| Field (CREG, ByteAcc, NoLock, Preserve) |
| { |
| PNP_ADDR_REG, 8, |
| PNP_DATA_REG, 8 |
| } |
| IndexField (PNP_ADDR_REG, PNP_DATA_REG, ByteAcc, NoLock, Preserve) |
| { |
| Offset (0x02), |
| CONFIGURE_CONTROL, 8, /* Global configure control */ |
| |
| Offset (0x07), |
| PNP_LOGICAL_DEVICE, 8, /* Logical device selector */ |
| |
| Offset (0x30), |
| PNP_DEVICE_ACTIVE, 1, /* Logical device activation */ |
| |
| Offset (0x60), |
| PNP_IO0_HIGH_BYTE, 8, /* First I/O port base - high byte */ |
| PNP_IO0_LOW_BYTE, 8, /* First I/O port base - low byte */ |
| PNP_IO1_HIGH_BYTE, 8, /* Second I/O port base - high byte */ |
| PNP_IO1_LOW_BYTE, 8, /* Second I/O port base - low byte */ |
| |
| Offset (0x70), |
| PNP_IRQ0, 8, /* First IRQ */ |
| } |
| |
| Method (_CRS) |
| { |
| /* Announce the used i/o ports to the OS */ |
| Return (ResourceTemplate () { |
| IO (Decode16, SUPERIO_PNP_BASE, SUPERIO_PNP_BASE, 0x01, 0x02) |
| }) |
| } |
| |
| #undef PNP_ENTER_MAGIC_1ST |
| #undef PNP_ENTER_MAGIC_2ND |
| #undef PNP_ENTER_MAGIC_3RD |
| #undef PNP_ENTER_MAGIC_4TH |
| #undef PNP_EXIT_MAGIC_1ST |
| #define PNP_ENTER_MAGIC_1ST 0x87 |
| #define PNP_ENTER_MAGIC_2ND 0x01 |
| #define PNP_ENTER_MAGIC_3RD 0x55 |
| #if SUPERIO_PNP_BASE == 0x2e |
| #define PNP_ENTER_MAGIC_4TH 0x55 |
| #else |
| #define PNP_ENTER_MAGIC_4TH 0xaa |
| #endif |
| #define PNP_EXIT_SPECIAL_REG CONFIGURE_CONTROL |
| #define PNP_EXIT_SPECIAL_VAL 0x02 |
| #include <superio/acpi/pnp_config.asl> |
| |
| #ifdef IT8659E_SHOW_UARTA |
| #undef SUPERIO_UART_LDN |
| #undef SUPERIO_UART_DDN |
| #undef SUPERIO_PNP_NO_DIS |
| #undef SUPERIO_UART_PM_REG |
| #undef SUPERIO_UART_PM_VAL |
| #undef SUPERIO_UART_PM_LDN |
| #define SUPERIO_UART_LDN 1 |
| #include <superio/acpi/pnp_uart.asl> |
| #endif |
| |
| #ifdef IT8659E_SHOW_UARTB |
| #undef SUPERIO_UART_LDN |
| #undef SUPERIO_UART_DDN |
| #undef SUPERIO_PNP_NO_DIS |
| #undef SUPERIO_UART_PM_REG |
| #undef SUPERIO_UART_PM_VAL |
| #undef SUPERIO_UART_PM_LDN |
| #define SUPERIO_UART_LDN 2 |
| #include <superio/acpi/pnp_uart.asl> |
| #endif |
| |
| #ifdef IT8659E_SHOW_KBC |
| #undef SUPERIO_KBC_LDN |
| #undef SUPERIO_KBC_PS2M |
| #undef SUPERIO_KBC_PS2LDN |
| #undef SUPERIO_PNP_NO_DIS |
| #define SUPERIO_KBC_LDN 5 |
| #ifdef IT8659E_SHOW_PS2M |
| #define SUPERIO_KBC_PS2LDN 6 |
| #endif |
| #include <superio/acpi/pnp_kbc.asl> |
| #endif |
| |
| |
| /* |
| * Generic setup for EC device. |
| * |
| * IT8659E_EC_IO0 The alignment and length of the first PnP i/o |
| * resource (comma separated, e.g. `0x02, 0x08`, |
| * optional) |
| * IT8659E_EC_IO1 The alignment and length of the second PnP i/o |
| * resource (comma separated, e.g. `0x02, 0x08`, |
| * optional) |
| * IT8659E_EC_IRQ0 If defined, the first PnP IRQ register is enabled |
| */ |
| #ifdef IT8659E_SHOW_EC |
| #undef SUPERIO_PNP_HID |
| #undef SUPERIO_PNP_LDN |
| #undef SUPERIO_PNP_DDN |
| #undef SUPERIO_PNP_NO_DIS |
| #undef SUPERIO_PNP_PM_REG |
| #undef SUPERIO_PNP_PM_VAL |
| #undef SUPERIO_PNP_PM_LDN |
| #undef SUPERIO_PNP_IO0 |
| #undef SUPERIO_PNP_IO1 |
| #undef SUPERIO_PNP_IO2 |
| #undef SUPERIO_PNP_IRQ0 |
| #undef SUPERIO_PNP_IRQ1 |
| #undef SUPERIO_PNP_DMA |
| |
| #define SUPERIO_PNP_LDN 4 |
| #define SUPERIO_PNP_DDN "ITE IT8659E Environmental Controller" |
| |
| #ifdef IT8659E_EC_IO0 |
| #define SUPERIO_PNP_IO0 0x08, 0x08 |
| #endif |
| |
| #ifdef IT8659E_EC_IO1 |
| #define SUPERIO_PNP_IO1 0x08, 0x04 |
| #endif |
| |
| #ifdef IT8659E_EC_IRQ0 |
| #define SUPERIO_PNP_IRQ0 |
| #endif |
| |
| #include <superio/acpi/pnp_generic.asl> |
| #endif |
| |
| /* |
| * Generic setup for GPIO device. |
| * |
| * IT8659E_EC_IO0 The alignment and length of the first PnP i/o |
| * resource (comma separated, e.g. `0x02, 0x08`, |
| * optional) |
| * IT8659E_EC_IO1 The alignment and length of the second PnP i/o |
| * resource (comma separated, e.g. `0x02, 0x08`, |
| * optional) |
| * IT8659E_EC_IRQ0 If defined, the first PnP IRQ register is enabled |
| */ |
| #ifdef IT8659E_SHOW_GPIO |
| #undef SUPERIO_PNP_HID |
| #undef SUPERIO_PNP_LDN |
| #undef SUPERIO_PNP_DDN |
| #undef SUPERIO_PNP_NO_DIS |
| #undef SUPERIO_PNP_PM_REG |
| #undef SUPERIO_PNP_PM_VAL |
| #undef SUPERIO_PNP_PM_LDN |
| #undef SUPERIO_PNP_IO0 |
| #undef SUPERIO_PNP_IO1 |
| #undef SUPERIO_PNP_IO2 |
| #undef SUPERIO_PNP_IRQ0 |
| #undef SUPERIO_PNP_IRQ1 |
| #undef SUPERIO_PNP_DMA |
| |
| #define SUPERIO_PNP_LDN 7 |
| #define SUPERIO_PNP_DDN "ITE IT8659E GPIO" |
| #define SUPERIO_PNP_NO_DIS |
| |
| #ifdef IT8659E_GPIO_IO0 |
| #define SUPERIO_PNP_IO0 0x04, 0x04 |
| #endif |
| |
| #ifdef IT8659E_GPIO_IO1 |
| #define SUPERIO_PNP_IO1 0x01, 0x08 |
| #endif |
| #include <superio/acpi/pnp_generic.asl> |
| #endif |
| |
| } |