| ## SPDX-License-Identifier: GPL-2.0-only |
| |
| ################################################################################ |
| # Take care of subdirectories |
| ################################################################################ |
| |
| subdirs-y += armv8/ |
| |
| ################################################################################ |
| # ARM specific options |
| ################################################################################ |
| |
| ifeq ($(CONFIG_ARCH_RAMSTAGE_ARM64),y) |
| check-ramstage-overlap-regions += postram_cbfs_cache stack ttb |
| endif |
| |
| ################################################################################ |
| # bootblock |
| ################################################################################ |
| |
| ifeq ($(CONFIG_ARCH_BOOTBLOCK_ARM64),y) |
| |
| decompressor-y += boot.c |
| bootblock-y += boot.c |
| decompressor-y += div0.c |
| bootblock-y += div0.c |
| decompressor-y += eabi_compat.c |
| bootblock-y += eabi_compat.c |
| |
| decompressor-$(CONFIG_ARM64_USE_ARCH_TIMER) += arch_timer.c |
| bootblock-$(CONFIG_ARM64_USE_ARCH_TIMER) += arch_timer.c |
| bootblock-y += transition.c transition_asm.S |
| |
| decompressor-y += memset.S |
| bootblock-y += memset.S |
| decompressor-y += memcpy.S |
| bootblock-y += memcpy.S |
| decompressor-y += memmove.S |
| bootblock-y += memmove.S |
| |
| # Build the bootblock |
| |
| $(objcbfs)/bootblock.debug: $$(bootblock-objs) $(obj)/config.h |
| @printf " LINK $(subst $(obj)/,,$(@))\n" |
| $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(bootblock-objs)) --end-group -T $(call src-to-obj,bootblock,$(CONFIG_MEMLAYOUT_LD_FILE)) |
| |
| $(objcbfs)/decompressor.debug: $$(decompressor-objs) $(obj)/config.h |
| @printf " LINK $(subst $(obj)/,,$(@))\n" |
| $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(decompressor-objs)) --end-group -T $(call src-to-obj,decompressor,$(CONFIG_MEMLAYOUT_LD_FILE)) |
| |
| endif # CONFIG_ARCH_BOOTBLOCK_ARM64 |
| |
| ############################################################################### |
| # verification stage |
| ############################################################################### |
| |
| ifeq ($(CONFIG_ARCH_VERSTAGE_ARM64),y) |
| |
| $(objcbfs)/verstage.debug: $$(verstage-objs) |
| @printf " LINK $(subst $(obj)/,,$(@))\n" |
| $(LD_verstage) $(LDFLAGS_verstage) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(verstage-objs)) --end-group -T $(call src-to-obj,verstage,$(CONFIG_MEMLAYOUT_LD_FILE)) |
| |
| verstage-y += boot.c |
| verstage-y += div0.c |
| verstage-y += eabi_compat.c |
| verstage-$(CONFIG_ARM64_USE_ARCH_TIMER) += arch_timer.c |
| verstage-y += memset.S |
| verstage-y += memcpy.S |
| verstage-y += memmove.S |
| |
| verstage-y += transition.c transition_asm.S |
| |
| endif # CONFIG_ARCH_VERSTAGE_ARM64 |
| |
| ################################################################################ |
| # romstage |
| ################################################################################ |
| |
| ifeq ($(CONFIG_ARCH_ROMSTAGE_ARM64),y) |
| |
| romstage-y += boot.c |
| romstage-y += div0.c |
| romstage-y += eabi_compat.c |
| romstage-$(CONFIG_ARM64_USE_ARCH_TIMER) += arch_timer.c |
| romstage-y += memset.S |
| romstage-y += memcpy.S |
| romstage-y += memmove.S |
| romstage-y += ramdetect.c |
| romstage-y += romstage.c |
| romstage-y += transition.c transition_asm.S |
| |
| rmodules_arm64-y += memset.S |
| rmodules_arm64-y += memcpy.S |
| rmodules_arm64-y += memmove.S |
| rmodules_arm64-y += eabi_compat.c |
| |
| $(objcbfs)/romstage.debug: $$(romstage-objs) |
| @printf " LINK $(subst $(obj)/,,$(@))\n" |
| $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(romstage-objs)) --end-group -T $(call src-to-obj,romstage,$(CONFIG_MEMLAYOUT_LD_FILE)) |
| |
| endif # CONFIG_ARCH_ROMSTAGE_ARM64 |
| |
| ################################################################################ |
| # ramstage |
| ################################################################################ |
| |
| ifeq ($(CONFIG_ARCH_RAMSTAGE_ARM64),y) |
| |
| ramstage-y += div0.c |
| ramstage-y += eabi_compat.c |
| ramstage-y += boot.c |
| ramstage-y += tables.c |
| ramstage-y += ramdetect.c |
| ramstage-$(CONFIG_ARM64_USE_ARCH_TIMER) += arch_timer.c |
| ramstage-y += memset.S |
| ramstage-y += memcpy.S |
| ramstage-y += memmove.S |
| ramstage-$(CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE) += bl31.c |
| ramstage-y += transition.c transition_asm.S |
| ramstage-$(CONFIG_PAYLOAD_FIT_SUPPORT) += fit_payload.c |
| ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c |
| ramstage-y += dma.c |
| |
| rmodules_arm64-y += memset.S |
| rmodules_arm64-y += memcpy.S |
| rmodules_arm64-y += memmove.S |
| rmodules_arm64-y += eabi_compat.c |
| rmodules_arm64-$(CONFIG_ARM64_USE_ARCH_TIMER) += arch_timer.c |
| |
| ramstage-srcs += $(wildcard src/mainboard/$(MAINBOARDDIR)/mainboard.c) |
| |
| # Build the ramstage |
| |
| $(objcbfs)/ramstage.debug: $$(ramstage-objs) |
| @printf " CC $(subst $(obj)/,,$(@))\n" |
| $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) --end-group -T $(call src-to-obj,ramstage,$(CONFIG_MEMLAYOUT_LD_FILE)) |
| |
| # Build ARM Trusted Firmware (BL31) |
| |
| ifeq ($(CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE),y) |
| |
| ifeq ($(CONFIG_ARM64_BL31_EXTERNAL_FILE),"") |
| |
| BL31_SOURCE := $(top)/3rdparty/arm-trusted-firmware |
| BL31_BUILD := $(abspath $(obj)/3rdparty/arm-trusted-firmware) |
| BL31_TARGET := $(BL31_BUILD)/bl31/bl31.elf |
| |
| ifeq ($(V),1) |
| BL31_MAKEARGS += V=1 |
| endif |
| |
| # Build ARM TF in debug mode (with assertions) if coreboot has hard assertions |
| ifeq ($(CONFIG_FATAL_ASSERTS),y) |
| BL31_MAKEARGS += DEBUG=1 |
| endif # CONFIG_FATAL_ASSERTS |
| |
| # ARM TF's VERBOSE (50) is *very* spammy, so default to INFO (40) |
| BL31_MAKEARGS += LOG_LEVEL=40 |
| |
| # Always enable crash reporting, even on a release build |
| BL31_MAKEARGS += CRASH_REPORTING=1 |
| |
| # Enable coreboot-specific features like CBMEM console support |
| BL31_MAKEARGS += COREBOOT=1 |
| |
| # Avoid build/release|build/debug distinction by overriding BUILD_PLAT directly |
| BL31_MAKEARGS += BUILD_PLAT="$(BL31_BUILD)" |
| |
| # Force making .d files and output directories even though target is not 'bl31' |
| BL31_MAKEARGS += IS_ANYTHING_TO_BUILD=1 |
| |
| # Set a consistent build timestamp: the same coreboot has |
| BL31_MAKEARGS += BUILD_MESSAGE_TIMESTAMP='"$(shell sed -n 's/^.define COREBOOT_BUILD\>.*"\(.*\)".*/\1/p' $(obj)/build.h)"' |
| |
| BL31_CFLAGS := -fno-pic -fno-stack-protector -Wno-deprecated-declarations -Wno-unused-function |
| BL31_LDFLAGS := -Wl,--emit-relocs |
| |
| BL31 := $(obj)/bl31.elf |
| |
| $(BL31): $(obj)/build.h |
| printf " MAKE $(subst $(obj)/,,$(@))\n" |
| +unset AS AR CC CPP OC OD LD; \ |
| CROSS_COMPILE="$(CROSS_COMPILE_arm64)" \ |
| CFLAGS="$(BL31_CFLAGS)" \ |
| LDFLAGS="$(BL31_LDFLAGS)" \ |
| $(MAKE) -C $(BL31_SOURCE) $(BL31_MAKEARGS) $(BL31_TARGET) DISABLE_PEDANTIC=1 |
| mv $(BL31_TARGET) $@ |
| |
| .PHONY: $(BL31) |
| |
| else |
| |
| BL31 := $(call strip_quotes,$(CONFIG_ARM64_BL31_EXTERNAL_FILE)) |
| |
| endif # CONFIG_ARM64_BUILD_ARM_TRUSTED_FIRMWARE |
| |
| |
| BL31_CBFS := $(CONFIG_CBFS_PREFIX)/bl31 |
| $(BL31_CBFS)-file := $(BL31) |
| $(BL31_CBFS)-type := payload |
| $(BL31_CBFS)-compression := $(CBFS_COMPRESS_FLAG) |
| cbfs-files-y += $(BL31_CBFS) |
| |
| check-ramstage-overlap-files += $(BL31_CBFS) |
| |
| ifeq ($(CONFIG_ARM64_USE_SECURE_OS),y) |
| |
| SECURE_OS_FILE := $(CONFIG_ARM64_SECURE_OS_FILE) |
| SECURE_OS_FILE_CBFS := $(CONFIG_CBFS_PREFIX)/secure_os |
| $(SECURE_OS_FILE_CBFS)-file := $(SECURE_OS_FILE) |
| $(SECURE_OS_FILE_CBFS)-type := stage |
| cbfs-files-y += $(SECURE_OS_FILE_CBFS) |
| |
| check-ramstage-overlap-files += $(SECURE_OS_FILE_CBFS) |
| |
| endif # CONFIG_ARM64_USE_SECURE_OS |
| |
| endif # CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE |
| |
| endif # CONFIG_ARCH_RAMSTAGE_ARM64 |