| /* |
| * This file is part of the coreboot project. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <AGESA.h> |
| #include <amdlib.h> |
| #include <amdblocks/acpimmio.h> |
| #include <northbridge/amd/agesa/BiosCallOuts.h> |
| #include <SB800.h> |
| #include <stdlib.h> |
| |
| static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr); |
| static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr); |
| |
| const BIOS_CALLOUT_STRUCT BiosCallouts[] = |
| { |
| {AGESA_DO_RESET, agesa_Reset }, |
| {AGESA_READ_SPD, agesa_ReadSpd }, |
| {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, |
| {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, |
| {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset }, |
| {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, |
| {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, |
| {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, |
| {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, |
| }; |
| const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); |
| |
| /* Call the host environment interface to provide a user hook opportunity. */ |
| static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr) |
| { |
| // Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage. |
| // Make sure the right speed settings are selected. |
| ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5; |
| return AGESA_SUCCESS; |
| } |
| |
| /* PCIE slot reset control */ |
| static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr) |
| { |
| AGESA_STATUS Status; |
| UINTN FcnData; |
| PCIe_SLOT_RESET_INFO *ResetInfo; |
| |
| UINT32 GpioMmioAddr; |
| UINT32 AcpiMmioAddr; |
| UINT8 Data8; |
| UINT16 Data16; |
| |
| FcnData = Data; |
| ResetInfo = ConfigPtr; |
| // Get SB800 MMIO Base (AcpiMmioAddr) |
| Data8 = pm_io_read8(0x27); |
| Data16=Data8<<8; |
| Data8 = pm_io_read8(0x26); |
| Data16|=Data8; |
| AcpiMmioAddr = (UINT32)Data16 << 16; |
| Status = AGESA_UNSUPPORTED; |
| GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; |
| switch (ResetInfo->ResetId) |
| { |
| case 46: // GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot |
| switch (ResetInfo->ResetControl) { |
| case AssertSlotReset: |
| Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); |
| Data8 &= ~(UINT8)BIT6; |
| Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8); |
| Status = AGESA_SUCCESS; |
| break; |
| case DeassertSlotReset: |
| Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); |
| Data8 |= BIT6; |
| Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8); |
| Status = AGESA_SUCCESS; |
| break; |
| } |
| break; |
| } |
| return Status; |
| } |