| # |
| # This file is part of the coreboot project. |
| # |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| |
| chip northbridge/intel/x4x # Northbridge |
| device cpu_cluster 0 on # APIC cluster |
| chip cpu/intel/socket_LGA775 |
| device lapic 0 on end |
| end |
| chip cpu/intel/model_1067x # CPU |
| device lapic 0xACAC off end |
| end |
| end |
| device domain 0 on # PCI domain |
| subsystemid 0x1458 0x5000 inherit |
| device pci 0.0 on # Host Bridge |
| subsystemid 0x1849 0x2e30 |
| end |
| device pci 1.0 on end # PEG |
| |
| device pci 2.0 on # Integrated graphics controller |
| subsystemid 0x1849 0x2e32 |
| end |
| device pci 3.0 off end # ME |
| device pci 3.1 off end # ME |
| chip southbridge/intel/i82801gx # Southbridge |
| register "pirqa_routing" = "0x0b" |
| register "pirqb_routing" = "0x0b" |
| register "pirqc_routing" = "0x0b" |
| register "pirqd_routing" = "0x0b" |
| register "pirqe_routing" = "0x80" |
| register "pirqf_routing" = "0x80" |
| register "pirqg_routing" = "0x80" |
| register "pirqh_routing" = "0x0b" |
| # GPI routing |
| # 0 No effect (default) |
| # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) |
| # 2 SCI (if corresponding GPIO_EN bit is also set) |
| register "gpi13_routing" = "2" |
| |
| register "ide_enable_primary" = "0x1" |
| register "sata_ports_implemented" = "0x3" |
| register "gpe0_en" = "0x440" |
| |
| register "gen1_dec" = "0x000c0291" # Superio HWM |
| |
| device pci 1b.0 on # Audio |
| subsystemid 0x1849 0x3662 |
| end |
| device pci 1c.0 on end # PCIe 1 |
| device pci 1c.1 on end # PCIe 2 |
| device pci 1c.2 off end # PCIe 3 |
| device pci 1c.3 off end # PCIe 4 |
| device pci 1d.0 on # USB |
| subsystemid 0x1849 0x27c8 |
| end |
| device pci 1d.1 on # USB |
| subsystemid 0x1849 0x27c9 |
| end |
| device pci 1d.2 on # USB |
| subsystemid 0x1849 0x27ca |
| end |
| device pci 1d.3 on # USB |
| subsystemid 0x1849 0x27cb |
| end |
| device pci 1d.7 on # USB |
| subsystemid 0x1849 0x27cc |
| end |
| device pci 1e.0 on end # PCI bridge |
| device pci 1e.2 off end # AC'97 Audio |
| device pci 1e.3 off end # AC'97 Modem |
| device pci 1f.0 on # ISA bridge |
| subsystemid 0x1849 0x27b8 |
| chip superio/nuvoton/nct6776 |
| device pnp 2e.0 off end # Floppy |
| device pnp 2e.1 on # Parallel port |
| # global |
| irq 0x1c = 0x80 |
| irq 0x27 = 0x80 |
| irq 0x2a = 0x60 |
| # parallel port |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| drq 0x74 = 3 |
| end |
| device pnp 2e.2 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.3 off end # COM2, IR |
| device pnp 2e.5 on # Keyboard |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 |
| end |
| device pnp 2e.6 on # CIR |
| io 0x60 = 0x230 |
| irq 0x70 = 3 |
| end |
| device pnp 2e.7 off end # GPIO6-9 |
| device pnp 2e.8 off end # WDT1, GPIO0, GPIO1, GPIOA |
| device pnp 2e.9 off end # GPIO2-5 |
| device pnp 2e.a on # ACPI |
| irq 0xe0 = 0x03 |
| irq 0xe4 = 0x10 # Power dram during s3 |
| irq 0xe6 = 0x4c |
| irq 0xe9 = 0x02 |
| irq 0xf0 = 0x20 |
| end |
| device pnp 2e.b on # HWM, front pannel LED |
| io 0x60 = 0x290 |
| io 0x62 = 0x200 |
| irq 0x70 = 0 |
| end |
| device pnp 2e.d on end # VID |
| device pnp 2e.e on # CIR WAKE-UP |
| io 0x60 = 0x240 |
| irq 0x70 = 0 |
| end |
| device pnp 2e.f on end # GPIO Push-Pull or Open-drain |
| device pnp 2e.14 on end # SVID |
| device pnp 2e.16 on end # Deep Sleep |
| device pnp 2e.17 on end # GPIOA |
| end |
| end |
| device pci 1f.1 on # PATA/IDE |
| subsystemid 0x1849 0x27df |
| end |
| device pci 1f.2 on # SATA |
| subsystemid 0x1849 0x27c0 |
| end |
| device pci 1f.3 on # SMbus |
| subsystemid 0x1849 0x27da |
| chip drivers/i2c/ck505 # W83115RG-965 |
| # set SATA to fixed 100Mhz refclk |
| register "mask" = "{ 0x02 }" |
| register "regs" = "{ 0x02 }" |
| device i2c 69 on end |
| end |
| end |
| end |
| end |
| end |