| /* |
| * This file is part of the coreboot project. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <amdblocks/agesawrapper.h> |
| #include <amdblocks/amd_pci_util.h> |
| #include <soc/southbridge.h> |
| |
| #include "gpio.h" |
| |
| /*********************************************************** |
| * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. |
| * This table is responsible for physically routing the PIC and |
| * IOAPIC IRQs to the different PCI devices on the system. It |
| * is read and written via registers 0xC00/0xC01 as an |
| * Index/Data pair. These values are chipset and mainboard |
| * dependent and should be updated accordingly. |
| * |
| * These values are used by the PCI configuration space, |
| * MP Tables. TODO: Make ACPI use these values too. |
| */ |
| static const u8 mainboard_picr_data[] = { |
| [0x00] = 0x03, 0x04, 0x05, 0x07, 0x0B, 0x0A, 0x1F, 0x1F, |
| [0x08] = 0xFA, 0xF1, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x10] = 0x1F, 0x1F, 0x1F, 0x03, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x18] = 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x20] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, |
| [0x28] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x30] = 0x05, 0x04, 0x05, 0x04, 0x04, 0x05, 0x04, 0x05, |
| [0x38] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x40] = 0x04, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x48] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x50] = 0x03, 0x04, 0x05, 0x07, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x58] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x60] = 0x1F, 0x1F, 0x07, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x68] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x70] = 0x03, 0x0F, 0x06, 0x0E, 0x0A, 0x0B, 0x1F, 0x1F, |
| [0x78] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, |
| }; |
| |
| static const u8 mainboard_intr_data[] = { |
| [0x00] = 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, |
| [0x08] = 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x10] = 0x09, 0x1F, 0x1F, 0x10, 0x1F, 0x1F, 0x1F, 0x10, |
| [0x18] = 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x20] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, |
| [0x28] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x30] = 0x12, 0x11, 0x12, 0x11, 0x12, 0x11, 0x12, 0x00, |
| [0x38] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x40] = 0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x48] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x50] = 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, |
| [0x58] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x60] = 0x1F, 0x1F, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x68] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x70] = 0x03, 0x0F, 0x06, 0x0E, 0x0A, 0x0B, 0x1F, 0x1F, |
| [0x78] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| /* PIRQ Setup */ |
| static void pirq_setup(void) |
| { |
| intr_data_ptr = mainboard_intr_data; |
| picr_data_ptr = mainboard_picr_data; |
| } |
| |
| static void mainboard_init(void *chip_info) |
| { |
| size_t num_gpios; |
| const struct soc_amd_gpio *gpios; |
| gpios = gpio_table(&num_gpios); |
| program_gpios(gpios, num_gpios); |
| } |
| |
| /************************************************* |
| * enable the dedicated function in gardenia board. |
| *************************************************/ |
| static void gardenia_enable(struct device *dev) |
| { |
| printk(BIOS_INFO, "Mainboard " |
| CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); |
| |
| /* Initialize the PIRQ data structures for consumption */ |
| pirq_setup(); |
| } |
| |
| struct chip_operations mainboard_ops = { |
| .init = mainboard_init, |
| .enable_dev = gardenia_enable, |
| }; |