| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2009 Samsung Electronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <console/uart.h> |
| #include <arch/io.h> |
| #include <boot/coreboot_tables.h> |
| #include <console/console.h> /* for __console definition */ |
| #include <drivers/uart/uart8250reg.h> |
| |
| |
| struct tegra124_uart { |
| union { |
| uint32_t thr; // Transmit holding register. |
| uint32_t rbr; // Receive buffer register. |
| uint32_t dll; // Divisor latch lsb. |
| }; |
| union { |
| uint32_t ier; // Interrupt enable register. |
| uint32_t dlm; // Divisor latch msb. |
| }; |
| union { |
| uint32_t iir; // Interrupt identification register. |
| uint32_t fcr; // FIFO control register. |
| }; |
| uint32_t lcr; // Line control register. |
| uint32_t mcr; // Modem control register. |
| uint32_t lsr; // Line status register. |
| uint32_t msr; // Modem status register. |
| } __attribute__ ((packed)); |
| |
| static void tegra124_uart_tx_flush(struct tegra124_uart *uart_ptr); |
| static int tegra124_uart_tst_byte(struct tegra124_uart *uart_ptr); |
| |
| static void tegra124_uart_init(struct tegra124_uart *uart_ptr) |
| { |
| // Use a hardcoded divisor for now. |
| const unsigned divisor = 221; |
| const uint8_t line_config = UART8250_LCR_WLS_8; // 8n1 |
| |
| tegra124_uart_tx_flush(uart_ptr); |
| |
| // Disable interrupts. |
| write8(0, &uart_ptr->ier); |
| // Set line configuration, access divisor latches. |
| write8(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr); |
| // Set the divisor. |
| write8(divisor & 0xff, &uart_ptr->dll); |
| write8((divisor >> 8) & 0xff, &uart_ptr->dlm); |
| // Hide the divisor latches. |
| write8(line_config, &uart_ptr->lcr); |
| // Enable FIFOs, and clear receive and transmit. |
| write8(UART8250_FCR_FIFO_EN | |
| UART8250_FCR_CLEAR_RCVR | |
| UART8250_FCR_CLEAR_XMIT, &uart_ptr->fcr); |
| } |
| |
| static unsigned char tegra124_uart_rx_byte(struct tegra124_uart *uart_ptr) |
| { |
| if (!tegra124_uart_tst_byte(uart_ptr)) |
| return 0; |
| return read8(&uart_ptr->rbr); |
| } |
| |
| static void tegra124_uart_tx_byte(struct tegra124_uart *uart_ptr, unsigned char data) |
| { |
| while (!(read8(&uart_ptr->lsr) & UART8250_LSR_THRE)); |
| write8(data, &uart_ptr->thr); |
| } |
| |
| static void tegra124_uart_tx_flush(struct tegra124_uart *uart_ptr) |
| { |
| while (!(read8(&uart_ptr->lsr) & UART8250_LSR_TEMT)); |
| } |
| |
| static int tegra124_uart_tst_byte(struct tegra124_uart *uart_ptr) |
| { |
| return (read8(&uart_ptr->lsr) & UART8250_LSR_DR) == UART8250_LSR_DR; |
| } |
| |
| unsigned int uart_platform_base(int idx) |
| { |
| //Default to UART A |
| unsigned int base = 0x70006000; |
| //UARTs A - E are mapped as index 0 - 4 |
| if ((idx < 5) && (idx >= 0)) { |
| if (idx != 1) { //not UART B |
| base += idx * 0x100; |
| } else { |
| base += 0x40; |
| } |
| } |
| return base; |
| } |
| |
| void uart_init(int idx) |
| { |
| struct tegra124_uart *uart_ptr = uart_platform_baseptr(idx); |
| tegra124_uart_init(uart_ptr); |
| } |
| |
| unsigned char uart_rx_byte(int idx) |
| { |
| struct tegra124_uart *uart_ptr = uart_platform_baseptr(idx); |
| return tegra124_uart_rx_byte(uart_ptr); |
| } |
| |
| void uart_tx_byte(int idx, unsigned char data) |
| { |
| struct tegra124_uart *uart_ptr = uart_platform_baseptr(idx); |
| tegra124_uart_tx_byte(uart_ptr, data); |
| } |
| |
| void uart_tx_flush(int idx) |
| { |
| struct tegra124_uart *uart_ptr = uart_platform_baseptr(idx); |
| tegra124_uart_tx_flush(uart_ptr); |
| } |
| |
| #ifndef __PRE_RAM__ |
| void uart_fill_lb(void *data) |
| { |
| struct lb_serial serial; |
| serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; |
| serial.baseaddr = uart_platform_base(CONFIG_UART_FOR_CONSOLE); |
| serial.baud = default_baudrate(); |
| lb_add_serial(&serial, data); |
| |
| lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data); |
| } |
| #endif |