| chip soc/intel/cannonlake |
| register "common_soc_config" = "{ |
| // Touchpad I2C bus |
| .i2c[0] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 80, |
| .fall_time_ns = 110, |
| }, |
| }" |
| |
| # CPU (soc/intel/cannonlake/cpu.c) |
| # Power limit |
| register "power_limits_config" = "{ |
| .tdp_pl1_override = 125, |
| .tdp_pl2_override = 160, |
| }" |
| |
| # Enable Enhanced Intel SpeedStep |
| register "eist_enable" = "1" |
| |
| # FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c) |
| register "enable_c6dram" = "1" |
| |
| # FSP Silicon (soc/intel/cannonlake/fsp_params.c) |
| # Serial I/O |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, // Touchpad I2C bus |
| [PchSerialIoIndexUART2] = PchSerialIoSkipInit, // Debug console |
| }" |
| |
| # Misc |
| register "AcousticNoiseMitigation" = "1" |
| |
| # Power |
| register "PchPmSlpS3MinAssert" = "3" # 50ms |
| register "PchPmSlpS4MinAssert" = "1" # 1s |
| register "PchPmSlpSusMinAssert" = "4" # 4s |
| register "PchPmSlpAMinAssert" = "4" # 2s |
| |
| # Thermal |
| register "tcc_offset" = "13" |
| |
| # PM Util (soc/intel/cannonlake/pmutil.c) |
| # GPE configuration |
| # Note that GPE events called out in ASL code rely on this |
| # route. i.e. If this route changes then the affected GPE |
| # offset bits also need to be changed. |
| register "gpe0_dw0" = "PMC_GPP_K" |
| register "gpe0_dw1" = "PMC_GPP_G" |
| register "gpe0_dw2" = "PMC_GPP_E" |
| |
| # Actual device tree |
| device cpu_cluster 0 on end |
| |
| device domain 0 on |
| subsystemid 0x1558 0x7714 inherit |
| device pci 00.0 on end # Host Bridge |
| device pci 01.0 on # GPU Port |
| # PCI Express Graphics #0 x16, Clock 7 (NVIDIA GPU) |
| register "PcieClkSrcUsage[7]" = "0x40" |
| register "PcieClkSrcClkReq[7]" = "7" |
| |
| device pci 00.0 on end # VGA controller |
| device pci 00.1 on end # Audio device |
| device pci 00.2 on end # USB xHCI Host controller |
| device pci 00.3 on end # USB Type-C UCSI controller |
| end |
| # TODO: is this enough to disable iGPU? |
| device pci 02.0 off end # Integrated Graphics Device |
| device pci 04.0 on end # SA Thermal device |
| device pci 12.0 on end # Thermal Subsystem |
| device pci 12.5 off end # UFS SCS |
| device pci 12.6 off end # GSPI #2 |
| device pci 13.0 off end # Integrated Sensor Hub |
| device pci 14.0 on # USB xHCI |
| register "usb2_ports" = "{ |
| [0] = USB2_PORT_MID(OC_SKIP), /* USB 3_2 */ |
| [1] = USB2_PORT_MID(OC_SKIP), /* USB 3_1 */ |
| [2] = USB2_PORT_MID(OC_SKIP), /* USB 3_4 */ |
| [3] = USB2_PORT_MID(OC_SKIP), /* USB 3_3 */ |
| [4] = USB2_PORT_MID(OC_SKIP), /* Per-key RGB */ |
| [5] = USB2_PORT_TYPE_C(OC_SKIP), /* USB Type-C */ |
| [6] = USB2_PORT_MID(OC_SKIP), /* XFI */ |
| [7] = USB2_PORT_MID(OC_SKIP), /* Camera */ |
| [8] = USB2_PORT_MID(OC_SKIP), /* Light guide */ |
| [9] = USB2_PORT_MID(OC_SKIP), /* Fingerprint */ |
| [13] = USB2_PORT_MID(OC_SKIP), /* Bluetooth */ |
| }" |
| register "usb3_ports" = "{ |
| [0] = USB3_PORT_DEFAULT(OC_SKIP), /* USB 3_2 */ |
| [1] = USB3_PORT_DEFAULT(OC_SKIP), /* ANX7440 */ |
| [2] = USB3_PORT_DEFAULT(OC_SKIP), /* USB 3_4 */ |
| [3] = USB3_PORT_DEFAULT(OC_SKIP), /* USB 3_3 */ |
| }" |
| end |
| device pci 14.2 on end # Shared SRAM |
| device pci 14.3 on # CNVi wifi |
| chip drivers/wifi/generic |
| register "wake" = "PME_B0_EN_BIT" |
| device generic 0 on end |
| end |
| end |
| device pci 14.5 off end # SDCard |
| device pci 15.0 on # I2C #0 |
| chip drivers/i2c/hid |
| register "generic.hid" = ""SYNA1202"" |
| register "generic.desc" = ""Synaptics Touchpad"" |
| register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" |
| register "generic.detect" = "1" |
| register "hid_desc_reg_offset" = "0x20" |
| device i2c 2c on end |
| end |
| end |
| device pci 15.1 off end # I2C #1 |
| device pci 15.2 off end # I2C #2 |
| device pci 15.3 off end # I2C #3 |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT Redirection |
| device pci 16.4 off end # Management Engine Interface 3 |
| device pci 16.5 off end # Management Engine Interface 4 |
| device pci 17.0 on # SATA |
| register "SataPortsEnable" = "{ |
| [1] = 1, /* SATA1A (SSD) */ |
| [3] = 1, /* SATA3 (M.2_SATA3) */ |
| [4] = 1, /* SATA4 (SSD2) */ |
| }" |
| end |
| device pci 19.2 off end # UART #2 |
| device pci 1a.0 off end # eMMC |
| device pci 1b.0 on # PCI Express Port 17 |
| # PCI Express root port #17 x4, Clock 14 (SSD2) |
| register "PcieRpEnable[16]" = "1" |
| register "PcieRpLtrEnable[16]" = "1" |
| register "PcieClkSrcUsage[14]" = "16" |
| register "PcieClkSrcClkReq[14]" = "14" |
| end |
| device pci 1b.1 off end # PCI Express Port 18 |
| device pci 1b.2 off end # PCI Express Port 19 |
| device pci 1b.3 off end # PCI Express Port 20 |
| device pci 1b.4 on # PCI Express Port 21 |
| # PCI Express root port #21 x4, Clock 15 (SSD3) |
| register "PcieRpEnable[20]" = "1" |
| register "PcieRpLtrEnable[20]" = "1" |
| register "PcieClkSrcUsage[15]" = "20" |
| register "PcieClkSrcClkReq[15]" = "15" |
| end |
| device pci 1b.5 off end # PCI Express Port 22 |
| device pci 1b.6 off end # PCI Express Port 23 |
| device pci 1b.7 off end # PCI Express Port 24 |
| device pci 1c.0 on # PCI Express Port 1 |
| # PCI Express root port #1 x4, Clock 6 (Thunderbolt) |
| register "PcieRpEnable[0]" = "1" |
| register "PcieRpLtrEnable[0]" = "1" |
| register "PcieRpHotPlug[0]" = "1" |
| register "PcieClkSrcUsage[6]" = "PCIE_CLK_RP0" # 0 is converted to PCIE_CLK_NOTUSED |
| register "PcieClkSrcClkReq[6]" = "6" |
| end |
| device pci 1c.1 off end # PCI Express Port 2 |
| device pci 1c.2 off end # PCI Express Port 3 |
| device pci 1c.3 off end # PCI Express Port 4 |
| device pci 1c.4 on # PCI Express Port 5 |
| # PCI Express root port #5 x4, Clock 10 (USB 3.2) |
| register "PcieRpEnable[4]" = "1" |
| register "PcieRpLtrEnable[4]" = "1" |
| register "PcieClkSrcUsage[10]" = "4" |
| register "PcieClkSrcClkReq[10]" = "10" |
| end |
| device pci 1c.5 off end # PCI Express Port 6 |
| device pci 1c.6 off end # PCI Express Port 7 |
| device pci 1c.7 off end # PCI Express Port 8 |
| device pci 1d.0 on # PCI Express Port 9 |
| # PCI Express root port #9 x4, Clock 8 (SSD) |
| register "PcieRpEnable[8]" = "1" |
| register "PcieRpLtrEnable[8]" = "1" |
| register "PcieClkSrcUsage[8]" = "8" |
| register "PcieClkSrcClkReq[8]" = "8" |
| end |
| device pci 1d.1 off end # PCI Express Port 10 |
| device pci 1d.2 off end # PCI Express Port 11 |
| device pci 1d.3 off end # PCI Express Port 12 |
| device pci 1d.4 on # PCI Express Port 13 |
| # PCI Express root port #13 x1, Clock 0 (WLAN) |
| register "PcieRpEnable[12]" = "1" |
| register "PcieRpLtrEnable[12]" = "1" |
| register "PcieClkSrcUsage[0]" = "12" |
| register "PcieClkSrcClkReq[0]" = "0" |
| end |
| device pci 1d.5 on # PCI Express Port 14 |
| # PCI Express root port #14 x1, Clock 1 (GLAN) |
| register "PcieRpEnable[13]" = "1" |
| register "PcieRpLtrEnable[13]" = "1" |
| register "PcieClkSrcUsage[1]" = "13" |
| register "PcieClkSrcClkReq[1]" = "1" |
| end |
| device pci 1d.6 on # PCI Express Port 15 |
| # PCI Express root port #15 x1, Clock 4 (Card Reader) |
| register "PcieRpEnable[14]" = "1" |
| register "PcieRpLtrEnable[14]" = "1" |
| register "PcieClkSrcUsage[4]" = "14" |
| register "PcieClkSrcClkReq[4]" = "4" |
| end |
| device pci 1d.7 off end # PCI Express Port 16 |
| device pci 1e.0 off end # UART #0 |
| device pci 1e.1 off end # UART #1 |
| device pci 1e.2 off end # GSPI #0 |
| device pci 1e.3 off end # GSPI #1 |
| device pci 1f.0 on # LPC Interface |
| register "gen1_dec" = "0x00040069" |
| register "gen2_dec" = "0x00fc0e01" |
| register "gen3_dec" = "0x00fc0f01" |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| end |
| device pci 1f.1 off end # P2SB |
| device pci 1f.2 hidden end # Power Management Controller |
| device pci 1f.3 on # Intel HDA |
| register "PchHdaAudioLinkHda" = "1" |
| end |
| device pci 1f.4 on end # SMBus |
| device pci 1f.5 on end # PCH SPI |
| device pci 1f.6 off end # GbE |
| end |
| end |