| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2009 coresystems GmbH |
| * Copyright (C) 2011 Sven Schnelle <svens@stackframe.org> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| // __PRE_RAM__ means: use "unsigned" for device, not a struct. |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <arch/io.h> |
| #include <device/pnp_ops.h> |
| #include <device/pci_ops.h> |
| #include <device/pci_def.h> |
| #include <device/pnp_def.h> |
| #include <cpu/x86/lapic.h> |
| #include <arch/acpi.h> |
| #include <console/console.h> |
| #include <cpu/x86/bist.h> |
| #include <cpu/intel/romstage.h> |
| #include <halt.h> |
| #include <northbridge/intel/i945/i945.h> |
| #include <northbridge/intel/i945/raminit.h> |
| #include <southbridge/intel/i82801gx/i82801gx.h> |
| #include <southbridge/intel/common/gpio.h> |
| #include "dock.h" |
| |
| static void ich7_enable_lpc(void) |
| { |
| // Enable Serial IRQ |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), SERIRQ_CNTL, 0xd0); |
| // decode range |
| pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_IO_DEC, 0x0210); |
| // decode range |
| pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN, CNF1_LPC_EN | MC_LPC_EN |
| | KBC_LPC_EN | GAMEH_LPC_EN | GAMEL_LPC_EN | FDD_LPC_EN |
| | LPT_LPC_EN | COMA_LPC_EN); |
| |
| /* range 0x1600 - 0x167f */ |
| pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN1_DEC, 0x007c1601); |
| |
| /* range 0x15e0 - 0x15ef */ |
| pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN2_DEC, 0x000c15e1); |
| |
| /* range 0x1680 - 0x169f */ |
| pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN3_DEC, 0x001c1681); |
| } |
| |
| static void early_superio_config(void) |
| { |
| int timeout = 100000; |
| pnp_devfn_t dev = PNP_DEV(0x2e, 3); |
| |
| pnp_write_config(dev, 0x29, 0xa0); |
| |
| while(!(pnp_read_config(dev, 0x29) & 0x10) && timeout--) |
| udelay(1000); |
| |
| /* Enable COM1 */ |
| pnp_set_logical_device(dev); |
| pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8); |
| pnp_set_enable(dev, 1); |
| } |
| |
| static void rcba_config(void) |
| { |
| /* Set up virtual channel 0 */ |
| RCBA32(V0CTL) = 0x80000001; |
| RCBA32(V1CAP) = 0x03128010; |
| |
| /* Device 1f interrupt pin register */ |
| RCBA32(D31IP) = 0x00001230; |
| RCBA32(D29IP) = 0x40004321; |
| |
| /* PCIe Interrupts */ |
| RCBA32(D28IP) = 0x00004321; |
| /* HD Audio Interrupt */ |
| RCBA32(D27IP) = 0x00000002; |
| |
| /* dev irq route register */ |
| RCBA16(D31IR) = 0x1007; |
| RCBA16(D30IR) = 0x0076; |
| RCBA16(D29IR) = 0x3210; |
| RCBA16(D28IR) = 0x7654; |
| RCBA16(D27IR) = 0x0010; |
| |
| /* Enable IOAPIC */ |
| RCBA8(OIC) = 0x03; |
| |
| /* Disable unused devices */ |
| RCBA32(FD) |= FD_INTLAN; |
| |
| /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ |
| RCBA64(IOTR0) = 0x000200010000fe01ULL; |
| |
| /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */ |
| RCBA64(IOTR3) = 0x000200f0000c0801ULL; |
| } |
| |
| static void early_ich7_init(void) |
| { |
| uint8_t reg8; |
| uint32_t reg32; |
| |
| // program secondary mlt XXX byte? |
| pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); |
| |
| // reset rtc power status |
| reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); |
| reg8 &= ~(1 << 2); |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); |
| |
| // usb transient disconnect |
| reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); |
| reg8 |= (3 << 0); |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); |
| |
| reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); |
| reg32 |= (1 << 29) | (1 << 17); |
| pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); |
| |
| reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); |
| reg32 |= (1 << 31) | (1 << 27); |
| pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); |
| |
| RCBA32(0x0088) = 0x0011d000; |
| RCBA16(0x01fc) = 0x060f; |
| RCBA32(0x01f4) = 0x86000040; |
| RCBA32(0x0214) = 0x10030549; |
| RCBA32(0x0218) = 0x00020504; |
| RCBA8(0x0220) = 0xc5; |
| reg32 = RCBA32(GCS); |
| reg32 |= (1 << 6); |
| RCBA32(GCS) = reg32; |
| reg32 = RCBA32(0x3430); |
| reg32 &= ~(3 << 0); |
| reg32 |= (1 << 0); |
| RCBA32(0x3430) = reg32; |
| RCBA16(0x0200) = 0x2008; |
| RCBA8(0x2027) = 0x0d; |
| RCBA16(0x3e08) |= (1 << 7); |
| RCBA16(0x3e48) |= (1 << 7); |
| RCBA32(0x3e0e) |= (1 << 7); |
| RCBA32(0x3e4e) |= (1 << 7); |
| |
| // next step only on ich7m b0 and later: |
| reg32 = RCBA32(0x2034); |
| reg32 &= ~(0x0f << 16); |
| reg32 |= (5 << 16); |
| RCBA32(0x2034) = reg32; |
| } |
| |
| void mainboard_romstage_entry(unsigned long bist) |
| { |
| int s3resume = 0; |
| int dock_err; |
| const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0, 0x51, 0 }; |
| |
| if (bist == 0) |
| enable_lapic(); |
| |
| ich7_enable_lpc(); |
| |
| /* We want early GPIO setup, to be able to detect legacy I/O module */ |
| pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); |
| /* Enable GPIOs */ |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */, 0x10); |
| setup_pch_gpios(&mainboard_gpio_map); |
| |
| dock_err = dlpc_init(); |
| |
| /* We prefer Legacy I/O module over docking */ |
| if (legacy_io_present()) { |
| legacy_io_init(); |
| early_superio_config(); |
| } else if (!dock_err && dock_present()) { |
| dock_connect(); |
| early_superio_config(); |
| } |
| |
| /* Setup the console */ |
| console_init(); |
| |
| /* Halt if there was a built in self test failure */ |
| report_bist_failure(bist); |
| |
| if (MCHBAR16(SSKPD) == 0xCAFE) { |
| printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); |
| outb(0x6, 0xcf9); |
| halt(); |
| } |
| |
| /* Perform some early chipset initialization required |
| * before RAM initialization can work |
| */ |
| i945_early_initialization(); |
| |
| s3resume = southbridge_detect_s3_resume(); |
| |
| /* Enable SPD ROMs and DDR-II DRAM */ |
| enable_smbus(); |
| |
| #if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 |
| dump_spd_registers(); |
| #endif |
| |
| sdram_initialize(s3resume ? 2 : 0, spd_addrmap); |
| |
| /* Perform some initialization that must run before stage2 */ |
| early_ich7_init(); |
| |
| /* This should probably go away. Until now it is required |
| * and mainboard specific |
| */ |
| rcba_config(); |
| |
| /* Chipset Errata! */ |
| fixup_i945_errata(); |
| |
| /* Initialize the internal PCIe links before we go into stage2 */ |
| i945_late_initialization(s3resume); |
| } |