| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <console/console.h> |
| #include <device/i2c_simple.h> |
| #include <soc/mt6360.h> |
| #include <stdbool.h> |
| |
| static struct mt6360_i2c_data i2c_data[] = { |
| [MT6360_INDEX_LDO] = { |
| .addr = MT6360_LDO_I2C_ADDR, |
| }, |
| [MT6360_INDEX_PMIC] = { |
| .addr = MT6360_PMIC_I2C_ADDR, |
| }, |
| }; |
| |
| static const uint32_t mt6360_ldo1_vsel_table[0x10] = { |
| [0x4] = 1800000, |
| [0x5] = 2000000, |
| [0x6] = 2100000, |
| [0x7] = 2500000, |
| [0x8] = 2700000, |
| [0x9] = 2800000, |
| [0xA] = 2900000, |
| [0xB] = 3000000, |
| [0xC] = 3100000, |
| [0xD] = 3300000, |
| }; |
| |
| static const uint32_t mt6360_ldo3_vsel_table[0x10] = { |
| [0x4] = 1800000, |
| [0xA] = 2900000, |
| [0xB] = 3000000, |
| [0xD] = 3300000, |
| }; |
| |
| static const uint32_t mt6360_ldo5_vsel_table[0x10] = { |
| [0x2] = 2900000, |
| [0x3] = 3000000, |
| [0x5] = 3300000, |
| }; |
| |
| static const struct mt6360_data regulator_data[MT6360_REGULATOR_COUNT] = { |
| [MT6360_LDO3] = MT6360_DATA(0x05, 0x40, 0x09, 0xff, mt6360_ldo3_vsel_table), |
| [MT6360_LDO5] = MT6360_DATA(0x0b, 0x40, 0x0f, 0xff, mt6360_ldo5_vsel_table), |
| [MT6360_LDO6] = MT6360_DATA(0x37, 0x40, 0x3b, 0xff, mt6360_ldo3_vsel_table), |
| [MT6360_LDO7] = MT6360_DATA(0x31, 0x40, 0x35, 0xff, mt6360_ldo5_vsel_table), |
| [MT6360_BUCK1] = MT6360_DATA(0x17, 0x40, 0x10, 0xff, mt6360_ldo1_vsel_table), |
| [MT6360_BUCK2] = MT6360_DATA(0x27, 0x40, 0x20, 0xff, mt6360_ldo1_vsel_table), |
| [MT6360_LDO1] = MT6360_DATA(0x17, 0x40, 0x1b, 0xff, mt6360_ldo1_vsel_table), |
| [MT6360_LDO2] = MT6360_DATA(0x11, 0x40, 0x15, 0xff, mt6360_ldo1_vsel_table), |
| }; |
| |
| #define CRC8_TABLE_SIZE 256 |
| static u8 crc8_table[MT6360_INDEX_COUNT][CRC8_TABLE_SIZE]; |
| |
| static u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes) |
| { |
| u8 crc = 0; |
| |
| while (nbytes-- > 0) |
| crc = table[(crc ^ *pdata++) & 0xff]; |
| |
| return crc; |
| } |
| |
| static void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial) |
| { |
| int i, j; |
| const u8 msbit = 0x80; |
| u8 t = msbit; |
| |
| table[0] = 0; |
| |
| for (i = 1; i < CRC8_TABLE_SIZE; i *= 2) { |
| t = (t << 1) ^ (t & msbit ? polynomial : 0); |
| for (j = 0; j < i; j++) |
| table[i + j] = table[j] ^ t; |
| } |
| } |
| |
| static int mt6360_i2c_write_byte(u8 index, u8 reg, u8 data) |
| { |
| u8 chunk[5] = { 0 }; |
| struct mt6360_i2c_data *i2c = &i2c_data[index]; |
| |
| if ((reg & 0xc0) != 0) { |
| printk(BIOS_ERR, "%s: not support reg [%#x]\n", __func__, reg); |
| return -1; |
| } |
| |
| /* |
| * chunk[0], dev address |
| * chunk[1], reg address |
| * chunk[2], data to write |
| * chunk[3], crc of chunk[0 ~ 2] |
| * chunk[4], blank |
| */ |
| chunk[0] = (i2c->addr & 0x7f) << 1; |
| chunk[1] = (reg & 0x3f); |
| chunk[2] = data; |
| chunk[3] = crc8(crc8_table[index], chunk, 3); |
| |
| return i2c_write_raw(i2c->bus, i2c->addr, &chunk[1], 4); |
| } |
| |
| static int mt6360_i2c_read_byte(u8 index, u8 reg, u8 *data) |
| { |
| u8 chunk[4] = { 0 }; |
| u8 buf[2]; |
| int ret; |
| u8 crc; |
| struct mt6360_i2c_data *i2c = &i2c_data[index]; |
| |
| ret = i2c_read_bytes(i2c->bus, i2c->addr, reg & 0x3f, buf, 2); |
| |
| if (ret) |
| return ret; |
| /* |
| * chunk[0], dev address |
| * chunk[1], reg address |
| * chunk[2], received data |
| * chunk[3], received crc of chunk[0 ~ 2] |
| */ |
| chunk[0] = ((i2c->addr & 0x7f) << 1) + 1; |
| chunk[1] = (reg & 0x3f); |
| chunk[2] = buf[0]; |
| chunk[3] = buf[1]; |
| crc = crc8(crc8_table[index], chunk, 3); |
| |
| if (chunk[3] != crc) { |
| printk(BIOS_ERR, "%s: incorrect CRC: expected %#x, got %#x", |
| __func__, crc, chunk[3]); |
| return -1; |
| } |
| |
| *data = chunk[2]; |
| |
| return 0; |
| } |
| |
| static int mt6360_read_interface(u8 index, u8 reg, u8 *data, u8 mask, u8 shift) |
| { |
| int ret; |
| u8 val = 0; |
| |
| ret = mt6360_i2c_read_byte(index, reg, &val); |
| if (ret < 0) { |
| printk(BIOS_ERR, "%s: fail, reg = %#x, ret = %d\n", |
| __func__, reg, ret); |
| return ret; |
| } |
| val &= (mask << shift); |
| *data = (val >> shift); |
| return 0; |
| } |
| |
| static int mt6360_config_interface(u8 index, u8 reg, u8 data, u8 mask, u8 shift) |
| { |
| int ret; |
| u8 val = 0; |
| |
| ret = mt6360_i2c_read_byte(index, reg, &val); |
| if (ret < 0) { |
| printk(BIOS_ERR, "%s: fail, reg = %#x, ret = %d\n", |
| __func__, reg, ret); |
| return ret; |
| } |
| val &= ~(mask << shift); |
| val |= (data << shift); |
| |
| return mt6360_i2c_write_byte(index, reg, val); |
| } |
| |
| static bool is_valid_ldo(enum mt6360_regulator_id id) |
| { |
| if (id != MT6360_LDO1 && id != MT6360_LDO2 && |
| id != MT6360_LDO3 && id != MT6360_LDO5) { |
| printk(BIOS_ERR, "%s: LDO %d is not supported\n", __func__, id); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool is_valid_pmic(enum mt6360_regulator_id id) |
| { |
| if (id != MT6360_LDO6 && id != MT6360_LDO7 && |
| id != MT6360_BUCK1 && id != MT6360_BUCK2) { |
| printk(BIOS_ERR, "%s: PMIC %d is not supported\n", __func__, id); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void mt6360_ldo_enable(enum mt6360_regulator_id id, uint8_t enable) |
| { |
| u8 val; |
| const struct mt6360_data *data; |
| |
| if (!is_valid_ldo(id)) |
| return; |
| |
| data = ®ulator_data[id]; |
| |
| if (mt6360_read_interface(MT6360_INDEX_LDO, data->enable_reg, &val, 0xff, 0) < 0) |
| return; |
| |
| if (enable) |
| val |= data->enable_mask; |
| else |
| val &= ~(data->enable_mask); |
| |
| mt6360_config_interface(MT6360_INDEX_LDO, data->enable_reg, val, 0xff, 0); |
| } |
| |
| static uint8_t mt6360_ldo_is_enabled(enum mt6360_regulator_id id) |
| { |
| u8 val; |
| const struct mt6360_data *data; |
| |
| if (!is_valid_ldo(id)) |
| return 0; |
| |
| data = ®ulator_data[id]; |
| |
| if (mt6360_read_interface(MT6360_INDEX_LDO, data->enable_reg, &val, 0xff, 0) < 0) |
| return 0; |
| |
| return (val & data->enable_mask) ? 1 : 0; |
| } |
| |
| static void mt6360_ldo_set_voltage(enum mt6360_regulator_id id, u32 voltage_uv) |
| { |
| u8 val = 0; |
| u32 voltage_uv_temp = 0; |
| int i; |
| |
| const struct mt6360_data *data; |
| |
| if (!is_valid_ldo(id)) |
| return; |
| |
| data = ®ulator_data[id]; |
| |
| for (i = 0; i < data->vsel_table_len; i++) { |
| u32 uv = data->vsel_table[i]; |
| |
| if (uv == 0) |
| continue; |
| if (uv > voltage_uv) |
| break; |
| |
| val = i << 4; |
| voltage_uv_temp = voltage_uv - uv; |
| } |
| |
| if (val == 0) { |
| printk(BIOS_ERR, "%s: LDO %d, set %d uV not supported\n", |
| __func__, id, voltage_uv); |
| return; |
| } |
| |
| voltage_uv_temp /= 10000; |
| voltage_uv_temp = MIN(voltage_uv_temp, 0xa); |
| val |= (u8)voltage_uv_temp; |
| |
| mt6360_config_interface(MT6360_INDEX_LDO, data->vsel_reg, val, 0xff, 0); |
| } |
| |
| static u32 mt6360_ldo_get_voltage(enum mt6360_regulator_id id) |
| { |
| u8 val; |
| u32 voltage_uv; |
| |
| const struct mt6360_data *data; |
| |
| if (!is_valid_ldo(id)) |
| return 0; |
| |
| data = ®ulator_data[id]; |
| |
| if (mt6360_read_interface(MT6360_INDEX_LDO, data->vsel_reg, &val, 0xff, 0) < 0) |
| return 0; |
| |
| voltage_uv = data->vsel_table[(val & 0xf0) >> 4]; |
| if (voltage_uv == 0) { |
| printk(BIOS_ERR, "%s: LDO %d read fail, reg = %#x\n", __func__, id, val); |
| return 0; |
| } |
| |
| val = MIN(val & 0x0f, 0x0a); |
| voltage_uv += val * 10000; |
| |
| return voltage_uv; |
| } |
| |
| static void mt6360_pmic_enable(enum mt6360_regulator_id id, uint8_t enable) |
| { |
| u8 val; |
| const struct mt6360_data *data; |
| |
| if (!is_valid_pmic(id)) |
| return; |
| |
| data = ®ulator_data[id]; |
| |
| if (mt6360_read_interface(MT6360_INDEX_PMIC, data->enable_reg, &val, 0xff, 0) < 0) |
| return; |
| |
| if (enable) |
| val |= data->enable_mask; |
| else |
| val &= ~(data->enable_mask); |
| |
| mt6360_config_interface(MT6360_INDEX_PMIC, data->enable_reg, val, 0xff, 0); |
| } |
| |
| static uint8_t mt6360_pmic_is_enabled(enum mt6360_regulator_id id) |
| { |
| u8 val; |
| const struct mt6360_data *data; |
| |
| if (!is_valid_pmic(id)) |
| return 0; |
| |
| data = ®ulator_data[id]; |
| |
| if (mt6360_read_interface(MT6360_INDEX_PMIC, data->enable_reg, &val, 0xff, 0) < 0) |
| return 0; |
| |
| return (val & data->enable_mask) ? 1 : 0; |
| } |
| |
| static void mt6360_pmic_set_voltage(enum mt6360_regulator_id id, u32 voltage_uv) |
| { |
| u8 val = 0; |
| |
| const struct mt6360_data *data; |
| |
| if (!is_valid_pmic(id)) |
| return; |
| |
| data = ®ulator_data[id]; |
| |
| if (id == MT6360_BUCK1 || id == MT6360_BUCK2) { |
| val = (voltage_uv - 300000) / 5000; |
| } else if (id == MT6360_LDO6 || id == MT6360_LDO7) { |
| val = (((voltage_uv - 500000) / 100000) << 4); |
| val += (((voltage_uv - 500000) % 100000) / 10000); |
| } |
| |
| mt6360_config_interface(MT6360_INDEX_PMIC, data->vsel_reg, val, 0xff, 0); |
| } |
| |
| static u32 mt6360_pmic_get_voltage(enum mt6360_regulator_id id) |
| { |
| u8 val; |
| u32 voltage_uv = 0; |
| |
| const struct mt6360_data *data; |
| |
| if (!is_valid_pmic(id)) |
| return 0; |
| |
| data = ®ulator_data[id]; |
| |
| if (mt6360_read_interface(MT6360_INDEX_PMIC, data->vsel_reg, &val, 0xff, 0) < 0) |
| return 0; |
| |
| if (id == MT6360_BUCK1 || id == MT6360_BUCK2) { |
| voltage_uv = 300000 + val * 5000; |
| } else if (id == MT6360_LDO6 || id == MT6360_LDO7) { |
| voltage_uv = 500000 + 100000 * (val >> 4); |
| voltage_uv += MIN(val & 0xf, 0xa) * 10000; |
| } |
| |
| return voltage_uv; |
| } |
| |
| void mt6360_init(uint8_t bus) |
| { |
| u8 delay01, delay02, delay03, delay04; |
| |
| crc8_populate_msb(crc8_table[MT6360_INDEX_LDO], 0x7); |
| crc8_populate_msb(crc8_table[MT6360_INDEX_PMIC], 0x7); |
| |
| i2c_data[MT6360_INDEX_LDO].bus = bus; |
| i2c_data[MT6360_INDEX_PMIC].bus = bus; |
| |
| mt6360_config_interface(MT6360_INDEX_PMIC, 0x07, 0x04, 0xff, 0); |
| mt6360_config_interface(MT6360_INDEX_PMIC, 0x08, 0x00, 0xff, 0); |
| mt6360_config_interface(MT6360_INDEX_PMIC, 0x09, 0x02, 0xff, 0); |
| mt6360_config_interface(MT6360_INDEX_PMIC, 0x0a, 0x00, 0xff, 0); |
| |
| mt6360_read_interface(MT6360_INDEX_PMIC, 0x07, &delay01, 0xff, 0); |
| mt6360_read_interface(MT6360_INDEX_PMIC, 0x08, &delay02, 0xff, 0); |
| mt6360_read_interface(MT6360_INDEX_PMIC, 0x09, &delay03, 0xff, 0); |
| mt6360_read_interface(MT6360_INDEX_PMIC, 0x0a, &delay04, 0xff, 0); |
| printk(BIOS_DEBUG, |
| "%s: power off sequence delay: %#x, %#x, %#x, %#x\n", |
| __func__, delay01, delay02, delay03, delay04); |
| } |
| |
| void mt6360_enable(enum mt6360_regulator_id id, uint8_t enable) |
| { |
| if (is_valid_ldo(id)) |
| mt6360_ldo_enable(id, enable); |
| else if (is_valid_pmic(id)) |
| mt6360_pmic_enable(id, enable); |
| } |
| |
| uint8_t mt6360_is_enabled(enum mt6360_regulator_id id) |
| { |
| if (is_valid_ldo(id)) |
| return mt6360_ldo_is_enabled(id); |
| else if (is_valid_pmic(id)) |
| return mt6360_pmic_is_enabled(id); |
| else |
| return 0; |
| } |
| |
| void mt6360_set_voltage(enum mt6360_regulator_id id, u32 voltage_uv) |
| { |
| if (is_valid_ldo(id)) |
| mt6360_ldo_set_voltage(id, voltage_uv); |
| else if (is_valid_pmic(id)) |
| mt6360_pmic_set_voltage(id, voltage_uv); |
| } |
| |
| u32 mt6360_get_voltage(enum mt6360_regulator_id id) |
| { |
| if (is_valid_ldo(id)) |
| return mt6360_ldo_get_voltage(id); |
| else if (is_valid_pmic(id)) |
| return mt6360_pmic_get_voltage(id); |
| else |
| return 0; |
| } |