| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <baseboard/variants.h> |
| #include <gpio.h> |
| #include <soc/meminit.h> |
| #include <soc/romstage.h> |
| |
| static const struct mb_cfg ehlcrb_lpddr4x_memcfg_cfg = { |
| |
| .dq_map[DDR_CH0] = { |
| {0xf, 0xf0}, |
| {0xf, 0xf0}, |
| {0xff, 0x0}, |
| {0x0, 0x0}, |
| {0x0, 0x0}, |
| {0x0, 0x0} |
| }, |
| |
| .dq_map[DDR_CH1] = { |
| {0xf, 0xf0}, |
| {0xf, 0xf0}, |
| {0xff, 0x0}, |
| {0x0, 0x0}, |
| {0x0, 0x0}, |
| {0x0, 0x0} |
| }, |
| |
| /* |
| * The dqs_map arrays map the ddr4 pins to the SoC pins |
| * for both channels. |
| * |
| * the index = pin number on ddr4 part |
| * the value = pin number on SoC |
| */ |
| .dqs_map[DDR_CH0] = {3, 0, 1, 2, 7, 4, 5, 6}, |
| .dqs_map[DDR_CH1] = {3, 0, 1, 2, 7, 4, 5, 6}, |
| |
| /* Baseboard uses 100, 100 and 100 rcomp resistors */ |
| .rcomp_resistor = {100, 100, 100}, |
| |
| .rcomp_targets = {60, 40, 30, 20, 30}, |
| |
| /* LPDDR4x does not allow interleaved memory */ |
| .dq_pins_interleaved = 0, |
| |
| /* Baseboard is using config 2 for vref_ca */ |
| .vref_ca_config = 2, |
| |
| /* Enable Early Command Training */ |
| .ect = 1, |
| |
| /* Set Board Type */ |
| .UserBd = BOARD_TYPE_MOBILE, |
| }; |
| |
| const struct mb_cfg *variant_memcfg_config(void) |
| { |
| return &ehlcrb_lpddr4x_memcfg_cfg; |
| } |