| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <bootstate.h> |
| #include <commonlib/console/post_codes.h> |
| #include <console/console.h> |
| #include <cpu/x86/smm.h> |
| #include <device/mmio.h> |
| #include <device/pci.h> |
| #include <intelblocks/lpc_lib.h> |
| #include <intelblocks/pcr.h> |
| #include <intelblocks/pmclib.h> |
| #include <intelblocks/systemagent.h> |
| #include <intelblocks/tco.h> |
| #include <soc/p2sb.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pcr_ids.h> |
| #include <soc/pm.h> |
| #include <soc/smbus.h> |
| #include <soc/soc_chip.h> |
| #include <soc/systemagent.h> |
| #include <spi-generic.h> |
| |
| #define CAMERA1_CLK 0x8000 /* Camera 1 Clock */ |
| #define CAMERA2_CLK 0x8080 /* Camera 2 Clock */ |
| #define CAM_CLK_EN (1 << 1) |
| #define MIPI_CLK (1 << 0) |
| #define HDPLL_CLK (0 << 0) |
| |
| static void pch_enable_isclk(void) |
| { |
| pcr_or32(PID_ISCLK, CAMERA1_CLK, CAM_CLK_EN | MIPI_CLK); |
| pcr_or32(PID_ISCLK, CAMERA2_CLK, CAM_CLK_EN | MIPI_CLK); |
| } |
| |
| static void pch_handle_sideband(config_t *config) |
| { |
| if (config->pch_isclk) |
| pch_enable_isclk(); |
| } |
| |
| static void pch_finalize(void) |
| { |
| uint32_t reg32; |
| uint8_t *pmcbase; |
| config_t *config = config_of_soc(); |
| |
| /* TCO Lock down */ |
| tco_lockdown(); |
| |
| /* TODO: Add Thermal Configuration */ |
| |
| pmcbase = pmc_mmio_regs(); |
| if (config->s0ix_enable) { |
| /* |
| * Enable USBSUSPGQDIS qualification to ensure USB2 PHY SUS is power gated |
| * before entering s0ix. |
| */ |
| reg32 = read32(pmcbase + CPPMVRIC3); |
| reg32 &= ~USBSUSPGQDIS; |
| write32(pmcbase + CPPMVRIC3, reg32); |
| |
| if (config->cnvi_reduce_s0ix_pwr_usage) { |
| setbits32(pmcbase + CPPMVRIC2, CNVIVNNAONREQQDIS); |
| setbits32(pmcbase + CORE_SPARE_GCR_0, BIT(0)); |
| } |
| } |
| |
| pch_handle_sideband(config); |
| |
| pmc_clear_pmcon_sts(); |
| } |
| |
| static void soc_finalize(void *unused) |
| { |
| printk(BIOS_DEBUG, "Finalizing chipset.\n"); |
| |
| pch_finalize(); |
| apm_control(APM_CNT_FINALIZE); |
| |
| /* Indicate finalize step with post code */ |
| post_code(POSTCODE_OS_BOOT); |
| } |
| |
| BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, soc_finalize, NULL); |
| BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, soc_finalize, NULL); |