| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <ec/acpi/ec.h> |
| |
| #include "chip.h" |
| |
| #define KBC_TIMEOUT_US 1000000 // 1s |
| |
| /* |
| * kbc1126_thermal_init: initialize fan control |
| * The code is found in EcThermalInit of the vendor firmware. |
| */ |
| static int kbc1126_thermal_init(u8 cmd, u8 value) |
| { |
| printk(BIOS_DEBUG, "KBC1126: initialize fan control.\n"); |
| |
| if (send_ec_command_timeout(cmd, KBC_TIMEOUT_US) < 0) |
| return -1; |
| |
| if (send_ec_data_timeout(0x27, KBC_TIMEOUT_US) < 0) |
| return -1; |
| |
| if (send_ec_data_timeout(0x01, KBC_TIMEOUT_US) < 0) |
| return -1; |
| |
| /* |
| * The following code is needed for fan control when AC is plugged in. |
| */ |
| |
| if (send_ec_command_timeout(cmd, KBC_TIMEOUT_US) < 0) |
| return -1; |
| |
| if (send_ec_data_timeout(0xd5, KBC_TIMEOUT_US) < 0) |
| return -1; |
| |
| if (send_ec_data_timeout(value, KBC_TIMEOUT_US) < 0) |
| return -1; |
| |
| printk(BIOS_DEBUG, "KBC1126: fan control initialized.\n"); |
| return 0; |
| } |
| |
| /* |
| * kbc1126_kbd_led: set CapsLock and NumLock LEDs |
| * This is used in MemoryErrorReport of the vendor firmware. |
| */ |
| static void kbc1126_kbd_led(u8 cmd, u8 val) |
| { |
| if (send_ec_command_timeout(cmd, KBC_TIMEOUT_US) < 0) |
| return; |
| |
| if (send_ec_data_timeout(0xf0, KBC_TIMEOUT_US) < 0) |
| return; |
| |
| if (send_ec_data_timeout(val, KBC_TIMEOUT_US) < 0) |
| return; |
| } |
| |
| static void kbc1126_enable(struct device *dev) |
| { |
| struct ec_hp_kbc1126_config *conf = dev->chip_info; |
| |
| ec_set_ports(conf->ec_cmd_port, conf->ec_data_port); |
| kbc1126_kbd_led(conf->ec_ctrl_reg, 0); |
| if (kbc1126_thermal_init(conf->ec_ctrl_reg, conf->ec_fan_ctrl_value) < 0) |
| printk(BIOS_DEBUG, "KBC1126: error when initializing fan control.\n"); |
| } |
| |
| struct chip_operations ec_hp_kbc1126_ops = { |
| .name = "SMSC KBC1126 for HP laptops", |
| .enable_dev = kbc1126_enable |
| }; |