| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| /** |
| * @file ddr3.c |
| * |
| * \brief Utilities for decoding DDR3 SPDs |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/dram/ddr3.h> |
| #include <device/dram/common.h> |
| #include <string.h> |
| #include <memory_info.h> |
| #include <cbmem.h> |
| #include <smbios.h> |
| #include <types.h> |
| |
| /*============================================================================== |
| * = DDR3 SPD decoding helpers |
| *----------------------------------------------------------------------------*/ |
| |
| /** |
| * \brief Checks if the DIMM is Registered based on byte[3] of the SPD |
| * |
| * Tells if the DIMM type is registered or not. |
| * |
| * @param type DIMM type. This is byte[3] of the SPD. |
| */ |
| int spd_dimm_is_registered_ddr3(enum spd_dimm_type_ddr3 type) |
| { |
| if ((type == SPD_DDR3_DIMM_TYPE_RDIMM) | (type == SPD_DDR3_DIMM_TYPE_MINI_RDIMM) | |
| (type == SPD_DDR3_DIMM_TYPE_72B_SO_RDIMM)) |
| return 1; |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Calculate the CRC of a DDR3 SPD |
| * |
| * @param spd pointer to raw SPD data |
| * @param len length of data in SPD |
| * |
| * @return the CRC of the SPD data, or 0 when spd data is truncated. |
| */ |
| u16 spd_ddr3_calc_crc(u8 *spd, int len) |
| { |
| int n_crc; |
| |
| /* Find the number of bytes covered by CRC */ |
| if (spd[0] & 0x80) { |
| n_crc = 117; |
| } else { |
| n_crc = 126; |
| } |
| |
| if (len < n_crc) |
| /* Not enough bytes available to get the CRC */ |
| return 0; |
| |
| return ddr_crc16(spd, n_crc); |
| } |
| |
| /** |
| * \brief Calculate the CRC of a DDR3 SPD unique identifier |
| * |
| * @param spd pointer to raw SPD data |
| * @param len length of data in SPD |
| * |
| * @return the CRC of SPD data bytes 117..127, or 0 when spd data is truncated. |
| */ |
| u16 spd_ddr3_calc_unique_crc(u8 *spd, int len) |
| { |
| if (len < (117 + 11)) |
| /* Not enough bytes available to get the CRC */ |
| return 0; |
| |
| return ddr_crc16(&spd[117], 11); |
| } |
| |
| /** |
| * \brief Decode the raw SPD data |
| * |
| * Decodes a raw SPD data from a DDR3 DIMM, and organizes it into a |
| * @ref dimm_attr structure. The SPD data must first be read in a contiguous |
| * array, and passed to this function. |
| * |
| * @param dimm pointer to @ref dimm_attr structure where the decoded data is to |
| * be stored |
| * @param spd array of raw data previously read from the SPD. |
| * |
| * @return @ref spd_status enumerator |
| * SPD_STATUS_OK -- decoding was successful |
| * SPD_STATUS_INVALID -- invalid SPD or not a DDR3 SPD |
| * SPD_STATUS_CRC_ERROR -- CRC did not verify |
| * SPD_STATUS_INVALID_FIELD -- A field with an invalid value was |
| * detected. |
| */ |
| int spd_decode_ddr3(struct dimm_attr_ddr3_st *dimm, spd_ddr3_raw_data spd) |
| { |
| int ret; |
| u16 crc, spd_crc; |
| u8 capacity_shift, bus_width; |
| u8 reg8; |
| u32 mtb; /* medium time base */ |
| u32 ftb; /* fine time base */ |
| unsigned int val; |
| |
| ret = SPD_STATUS_OK; |
| |
| /* Don't assume we memset 0 dimm struct. Clear all our flags */ |
| dimm->flags.raw = 0; |
| dimm->dimms_per_channel = 3; |
| |
| /* Make sure that the SPD dump is indeed from a DDR3 module */ |
| if (spd[2] != SPD_MEMORY_TYPE_SDRAM_DDR3) { |
| printram("Not a DDR3 SPD!\n"); |
| dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; |
| return SPD_STATUS_INVALID; |
| } |
| dimm->dram_type = SPD_MEMORY_TYPE_SDRAM_DDR3; |
| dimm->dimm_type = spd[3] & 0xf; |
| |
| crc = spd_ddr3_calc_crc(spd, sizeof(spd_ddr3_raw_data)); |
| /* Compare with the CRC in the SPD */ |
| spd_crc = (spd[127] << 8) + spd[126]; |
| /* Verify the CRC is correct */ |
| if (crc != spd_crc) { |
| printram("ERROR: SPD CRC failed!!!\n"); |
| ret = SPD_STATUS_CRC_ERROR; |
| }; |
| |
| printram(" Revision : %x\n", spd[1]); |
| printram(" Type : %x\n", spd[2]); |
| printram(" Key : %x\n", spd[3]); |
| |
| reg8 = spd[4]; |
| /* Number of memory banks */ |
| val = (reg8 >> 4) & 0x07; |
| if (val > 0x03) { |
| printram(" Invalid number of memory banks\n"); |
| ret = SPD_STATUS_INVALID_FIELD; |
| } |
| printram(" Banks : %u\n", 1 << (val + 3)); |
| /* SDRAM capacity */ |
| capacity_shift = reg8 & 0x0f; |
| if (capacity_shift > 0x06) { |
| printram(" Invalid module capacity\n"); |
| ret = SPD_STATUS_INVALID_FIELD; |
| } |
| if (capacity_shift < 0x02) { |
| printram(" Capacity : %u Mb\n", 256 << capacity_shift); |
| } else { |
| printram(" Capacity : %u Gb\n", 1 << (capacity_shift - 2)); |
| } |
| |
| reg8 = spd[5]; |
| /* Row address bits */ |
| val = (reg8 >> 3) & 0x07; |
| if (val > 0x04) { |
| printram(" Invalid row address bits\n"); |
| ret = SPD_STATUS_INVALID_FIELD; |
| } |
| dimm->row_bits = val + 12; |
| /* Column address bits */ |
| val = reg8 & 0x07; |
| if (val > 0x03) { |
| printram(" Invalid column address bits\n"); |
| ret = SPD_STATUS_INVALID_FIELD; |
| } |
| dimm->col_bits = val + 9; |
| |
| /* Module nominal voltage */ |
| reg8 = spd[6]; |
| printram(" Supported voltages :"); |
| if (reg8 & (1 << 2)) { |
| dimm->flags.operable_1_25V = 1; |
| dimm->voltage = 1250; |
| printram(" 1.25V"); |
| } |
| if (reg8 & (1 << 1)) { |
| dimm->flags.operable_1_35V = 1; |
| dimm->voltage = 1300; |
| printram(" 1.35V"); |
| } |
| if (!(reg8 & (1 << 0))) { |
| dimm->flags.operable_1_50V = 1; |
| dimm->voltage = 1500; |
| printram(" 1.5V"); |
| } |
| printram("\n"); |
| |
| /* Module organization */ |
| reg8 = spd[7]; |
| /* Number of ranks */ |
| val = (reg8 >> 3) & 0x07; |
| if (val > 3) { |
| printram(" Invalid number of ranks\n"); |
| ret = SPD_STATUS_INVALID_FIELD; |
| } |
| dimm->ranks = val + 1; |
| /* SDRAM device width */ |
| val = (reg8 & 0x07); |
| if (val > 3) { |
| printram(" Invalid SDRAM width\n"); |
| ret = SPD_STATUS_INVALID_FIELD; |
| } |
| dimm->width = (4 << val); |
| printram(" SDRAM width : %u\n", dimm->width); |
| |
| /* Memory bus width */ |
| reg8 = spd[8]; |
| /* Bus extension */ |
| val = (reg8 >> 3) & 0x03; |
| if (val > 1) { |
| printram(" Invalid bus extension\n"); |
| ret = SPD_STATUS_INVALID_FIELD; |
| } |
| dimm->flags.is_ecc = val ? 1 : 0; |
| printram(" Bus extension : %u bits\n", val ? 8 : 0); |
| /* Bus width */ |
| val = reg8 & 0x07; |
| if (val > 3) { |
| printram(" Invalid bus width\n"); |
| ret = SPD_STATUS_INVALID_FIELD; |
| } |
| bus_width = 8 << val; |
| printram(" Bus width : %u\n", bus_width); |
| |
| /* We have all the info we need to compute the dimm size */ |
| /* Capacity is 256Mbit multiplied by the power of 2 specified in |
| * capacity_shift |
| * The rest is the JEDEC formula */ |
| dimm->size_mb = |
| ((1 << (capacity_shift + (25 - 20))) * bus_width * dimm->ranks) / dimm->width; |
| |
| /* Medium Timebase = |
| * Medium Timebase (MTB) Dividend / |
| * Medium Timebase (MTB) Divisor */ |
| mtb = (((u32)spd[10]) << 8) / spd[11]; |
| |
| /* SDRAM Minimum Cycle Time (tCKmin) */ |
| dimm->tCK = spd[12] * mtb; |
| /* CAS Latencies Supported */ |
| dimm->cas_supported = (spd[15] << 8) + spd[14]; |
| /* Minimum CAS Latency Time (tAAmin) */ |
| dimm->tAA = spd[16] * mtb; |
| /* Minimum Write Recovery Time (tWRmin) */ |
| dimm->tWR = spd[17] * mtb; |
| /* Minimum RAS# to CAS# Delay Time (tRCDmin) */ |
| dimm->tRCD = spd[18] * mtb; |
| /* Minimum Row Active to Row Active Delay Time (tRRDmin) */ |
| dimm->tRRD = spd[19] * mtb; |
| /* Minimum Row Precharge Delay Time (tRPmin) */ |
| dimm->tRP = spd[20] * mtb; |
| /* Minimum Active to Precharge Delay Time (tRASmin) */ |
| dimm->tRAS = (((spd[21] & 0x0f) << 8) + spd[22]) * mtb; |
| /* Minimum Active to Active/Refresh Delay Time (tRCmin) */ |
| dimm->tRC = (((spd[21] & 0xf0) << 4) + spd[23]) * mtb; |
| /* Minimum Refresh Recovery Delay Time (tRFCmin) */ |
| dimm->tRFC = ((spd[25] << 8) + spd[24]) * mtb; |
| /* Minimum Internal Write to Read Command Delay Time (tWTRmin) */ |
| dimm->tWTR = spd[26] * mtb; |
| /* Minimum Internal Read to Precharge Command Delay Time (tRTPmin) */ |
| dimm->tRTP = spd[27] * mtb; |
| /* Minimum Four Activate Window Delay Time (tFAWmin) */ |
| dimm->tFAW = (((spd[28] & 0x0f) << 8) + spd[29]) * mtb; |
| /* Minimum CAS Write Latency Time (tCWLmin) |
| * - not present in standard SPD */ |
| dimm->tCWL = 0; |
| /* System CMD Rate Mode - not present in standard SPD */ |
| dimm->tCMD = 0; |
| |
| printram(" FTB timings :"); |
| /* FTB is introduced in SPD revision 1.1 */ |
| if (spd[1] >= 0x11 && spd[9] & 0x0f) { |
| printram(" yes\n"); |
| |
| /* Fine timebase (1/256 ps) = |
| * Fine Timebase (FTB) Dividend / |
| * Fine Timebase (FTB) Divisor */ |
| ftb = (((u16)spd[9] & 0xf0) << 4) / (spd[9] & 0x0f); |
| |
| /* SPD recommends to round up the MTB part and use a negative |
| * FTB, so a negative rounding should be always safe */ |
| |
| /* SDRAM Minimum Cycle Time (tCKmin) correction */ |
| dimm->tCK += (s32)((s8)spd[34] * ftb - 500) / 1000; |
| /* Minimum CAS Latency Time (tAAmin) correction */ |
| dimm->tAA += (s32)((s8)spd[35] * ftb - 500) / 1000; |
| /* Minimum RAS# to CAS# Delay Time (tRCDmin) correction */ |
| dimm->tRCD += (s32)((s8)spd[36] * ftb - 500) / 1000; |
| /* Minimum Row Precharge Delay Time (tRPmin) correction */ |
| dimm->tRP += (s32)((s8)spd[37] * ftb - 500) / 1000; |
| /* Minimum Active to Active/Refresh Delay Time (tRCmin) corr. */ |
| dimm->tRC += (s32)((s8)spd[38] * ftb - 500) / 1000; |
| } else { |
| printram(" no\n"); |
| } |
| |
| /* SDRAM Optional Features */ |
| reg8 = spd[30]; |
| printram(" Optional features :"); |
| if (reg8 & 0x80) { |
| dimm->flags.dll_off_mode = 1; |
| printram(" DLL-Off_mode"); |
| } |
| if (reg8 & 0x02) { |
| dimm->flags.rzq7_supported = 1; |
| printram(" RZQ/7"); |
| } |
| if (reg8 & 0x01) { |
| dimm->flags.rzq6_supported = 1; |
| printram(" RZQ/6"); |
| } |
| printram("\n"); |
| |
| /* SDRAM Thermal and Refresh Options */ |
| reg8 = spd[31]; |
| printram(" Thermal features :"); |
| if (reg8 & 0x80) { |
| dimm->flags.pasr = 1; |
| printram(" PASR"); |
| } |
| if (reg8 & 0x08) { |
| dimm->flags.odts = 1; |
| printram(" ODTS"); |
| } |
| if (reg8 & 0x04) { |
| dimm->flags.asr = 1; |
| printram(" ASR"); |
| } |
| if (reg8 & 0x02) { |
| dimm->flags.ext_temp_range = 1; |
| printram(" ext_temp_refresh"); |
| } |
| if (reg8 & 0x01) { |
| dimm->flags.ext_temp_refresh = 1; |
| printram(" ext_temp_range"); |
| } |
| printram("\n"); |
| |
| /* Module Thermal Sensor */ |
| reg8 = spd[32]; |
| if (reg8 & 0x80) |
| dimm->flags.therm_sensor = 1; |
| printram(" Thermal sensor : %s\n", dimm->flags.therm_sensor ? "yes" : "no"); |
| |
| /* SDRAM Device Type */ |
| printram(" Standard SDRAM : %s\n", (spd[33] & 0x80) ? "no" : "yes"); |
| |
| if (spd[63] & 0x01) { |
| dimm->flags.pins_mirrored = 1; |
| } |
| printram(" Rank1 Address bits : %s\n", (spd[63] & 0x01) ? "mirrored" : "normal"); |
| |
| dimm->reference_card = spd[62] & 0x1f; |
| printram(" DIMM Reference card: %c\n", 'A' + dimm->reference_card); |
| |
| dimm->manufacturer_id = (spd[118] << 8) | spd[117]; |
| printram(" Manufacturer ID : %x\n", dimm->manufacturer_id); |
| |
| dimm->part_number[16] = 0; |
| memcpy(dimm->part_number, &spd[128], 16); |
| printram(" Part number : %s\n", dimm->part_number); |
| |
| memcpy(dimm->serial, &spd[SPD_DDR3_SERIAL_NUM], SPD_DDR3_SERIAL_LEN); |
| |
| return ret; |
| } |
| |
| /** |
| * \brief Decode the raw SPD XMP data |
| * |
| * Decodes a raw SPD XMP data from a DDR3 DIMM, and organizes it into a |
| * @ref dimm_attr structure. The SPD data must first be read in a contiguous |
| * array, and passed to this function. |
| * |
| * @param dimm pointer to @ref dimm_attr structure where the decoded data is to |
| * be stored |
| * @param spd array of raw data previously read from the SPD. |
| * |
| * @param profile select one of the profiles to load |
| * |
| * @return @ref spd_status enumerator |
| * SPD_STATUS_OK -- decoding was successful |
| * SPD_STATUS_INVALID -- invalid SPD or not a DDR3 SPD |
| * SPD_STATUS_CRC_ERROR -- CRC did not verify |
| * SPD_STATUS_INVALID_FIELD -- A field with an invalid value was |
| * detected. |
| */ |
| int spd_xmp_decode_ddr3(struct dimm_attr_ddr3_st *dimm, spd_ddr3_raw_data spd, |
| enum ddr3_xmp_profile profile) |
| { |
| int ret; |
| u32 mtb; /* medium time base */ |
| u8 *xmp; /* pointer to XMP profile data */ |
| |
| /* need a valid SPD */ |
| ret = spd_decode_ddr3(dimm, spd); |
| if (ret != SPD_STATUS_OK) |
| return ret; |
| |
| /* search for magic header */ |
| if (spd[176] != 0x0C || spd[177] != 0x4A) { |
| printram("Not a DDR3 XMP profile!\n"); |
| dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; |
| return SPD_STATUS_INVALID; |
| } |
| |
| if (profile == DDR3_XMP_PROFILE_1) { |
| if (!(spd[178] & 1)) { |
| printram("Selected XMP profile disabled!\n"); |
| dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; |
| return SPD_STATUS_INVALID; |
| } |
| |
| printram(" XMP Profile : 1\n"); |
| xmp = &spd[185]; |
| |
| /* Medium Timebase = |
| * Medium Timebase (MTB) Dividend / |
| * Medium Timebase (MTB) Divisor */ |
| if (spd[181] == 0) // Avoid dividing by zero. |
| return SPD_STATUS_INVALID; |
| mtb = (((u32)spd[180]) << 8) / spd[181]; |
| |
| dimm->dimms_per_channel = ((spd[178] >> 2) & 0x3) + 1; |
| } else { |
| if (!(spd[178] & 2)) { |
| printram("Selected XMP profile disabled!\n"); |
| dimm->dram_type = SPD_MEMORY_TYPE_UNDEFINED; |
| return SPD_STATUS_INVALID; |
| } |
| printram(" XMP Profile : 2\n"); |
| xmp = &spd[220]; |
| |
| /* Medium Timebase = |
| * Medium Timebase (MTB) Dividend / |
| * Medium Timebase (MTB) Divisor */ |
| if (spd[183] == 0) // Avoid dividing by zero. |
| return SPD_STATUS_INVALID; |
| mtb = (((u32)spd[182]) << 8) / spd[183]; |
| |
| dimm->dimms_per_channel = ((spd[178] >> 4) & 0x3) + 1; |
| } |
| |
| printram(" Max DIMMs/channel : %u\n", dimm->dimms_per_channel); |
| |
| printram(" XMP Revision : %u.%u\n", spd[179] >> 4, spd[179] & 0xf); |
| |
| /* calculate voltage in mV */ |
| dimm->voltage = (xmp[0] & 1) * 50; |
| dimm->voltage += ((xmp[0] >> 1) & 0xf) * 100; |
| dimm->voltage += ((xmp[0] >> 5) & 0x3) * 1000; |
| |
| printram(" Requested voltage : %u mV\n", dimm->voltage); |
| |
| /* SDRAM Minimum Cycle Time (tCKmin) */ |
| dimm->tCK = xmp[1] * mtb; |
| /* CAS Latencies Supported */ |
| dimm->cas_supported = ((xmp[4] << 8) + xmp[3]) & 0x7fff; |
| /* Minimum CAS Latency Time (tAAmin) */ |
| dimm->tAA = xmp[2] * mtb; |
| /* Minimum Write Recovery Time (tWRmin) */ |
| dimm->tWR = xmp[8] * mtb; |
| /* Minimum RAS# to CAS# Delay Time (tRCDmin) */ |
| dimm->tRCD = xmp[7] * mtb; |
| /* Minimum Row Active to Row Active Delay Time (tRRDmin) */ |
| dimm->tRRD = xmp[17] * mtb; |
| /* Minimum Row Precharge Delay Time (tRPmin) */ |
| dimm->tRP = xmp[6] * mtb; |
| /* Minimum Active to Precharge Delay Time (tRASmin) */ |
| dimm->tRAS = (((xmp[9] & 0x0f) << 8) + xmp[10]) * mtb; |
| /* Minimum Active to Active/Refresh Delay Time (tRCmin) */ |
| dimm->tRC = (((xmp[9] & 0xf0) << 4) + xmp[11]) * mtb; |
| /* Minimum Refresh Recovery Delay Time (tRFCmin) */ |
| dimm->tRFC = ((xmp[15] << 8) + xmp[14]) * mtb; |
| /* Minimum Internal Write to Read Command Delay Time (tWTRmin) */ |
| dimm->tWTR = xmp[20] * mtb; |
| /* Minimum Internal Read to Precharge Command Delay Time (tRTPmin) */ |
| dimm->tRTP = xmp[16] * mtb; |
| /* Minimum Four Activate Window Delay Time (tFAWmin) */ |
| dimm->tFAW = (((xmp[18] & 0x0f) << 8) + xmp[19]) * mtb; |
| /* Minimum CAS Write Latency Time (tCWLmin) */ |
| dimm->tCWL = xmp[5] * mtb; |
| /* System CMD Rate Mode */ |
| dimm->tCMD = xmp[23] * mtb; |
| |
| return ret; |
| } |
| |
| /** |
| * Fill cbmem with information for SMBIOS type 17. |
| * |
| * @param channel Corresponding channel of provided @info |
| * @param slot Corresponding slot of provided @info |
| * @param selected_freq The actual frequency the DRAM is running on |
| * @param info DIMM parameters read from SPD |
| * |
| * @return CB_SUCCESS if DIMM info was written |
| */ |
| enum cb_err spd_add_smbios17(const u8 channel, const u8 slot, const u16 selected_freq, |
| const struct dimm_attr_ddr3_st *info) |
| { |
| struct memory_info *mem_info; |
| struct dimm_info *dimm; |
| |
| /* |
| * Allocate CBMEM area for DIMM information used to populate SMBIOS |
| * table 17 |
| */ |
| mem_info = cbmem_find(CBMEM_ID_MEMINFO); |
| if (!mem_info) { |
| mem_info = cbmem_add(CBMEM_ID_MEMINFO, sizeof(*mem_info)); |
| |
| printk(BIOS_DEBUG, "CBMEM entry for DIMM info: %p\n", mem_info); |
| if (!mem_info) |
| return CB_ERR; |
| |
| memset(mem_info, 0, sizeof(*mem_info)); |
| } |
| |
| if (mem_info->dimm_cnt >= ARRAY_SIZE(mem_info->dimm)) { |
| printk(BIOS_WARNING, "BUG: Too many DIMM infos for %s.\n", __func__); |
| return CB_ERR; |
| } |
| |
| dimm = &mem_info->dimm[mem_info->dimm_cnt]; |
| if (info->size_mb) { |
| dimm->ddr_type = MEMORY_TYPE_DDR3; |
| dimm->ddr_frequency = selected_freq; |
| dimm->dimm_size = info->size_mb; |
| dimm->channel_num = channel; |
| dimm->rank_per_dimm = info->ranks; |
| dimm->dimm_num = slot; |
| memcpy(dimm->module_part_number, info->part_number, 16); |
| dimm->mod_id = info->manufacturer_id; |
| dimm->mod_type = info->dimm_type; |
| dimm->bus_width = MEMORY_BUS_WIDTH_64; // non-ECC only |
| memcpy(dimm->serial, info->serial, |
| MIN(sizeof(dimm->serial), sizeof(info->serial))); |
| mem_info->dimm_cnt++; |
| } |
| |
| return CB_SUCCESS; |
| } |
| |
| /* |
| * The information printed below has a more informational character, and is not |
| * necessarily tied in to RAM init debugging. Hence, we stop using printram(), |
| * and use the standard printk()'s below. |
| */ |
| |
| static void print_ns(const char *msg, u32 val) |
| { |
| u32 mant, fp; |
| mant = val / 256; |
| fp = (val % 256) * 1000 / 256; |
| |
| printk(BIOS_INFO, "%s%3u.%.3u ns\n", msg, mant, fp); |
| } |
| |
| /** |
| * \brief Print the info in DIMM |
| * |
| * Print info about the DIMM. Useful to use when CONFIG(DEBUG_RAM_SETUP) is |
| * selected, or for a purely informative output. |
| * |
| * @param dimm pointer to already decoded @ref dimm_attr structure |
| */ |
| void dram_print_spd_ddr3(const struct dimm_attr_ddr3_st *dimm) |
| { |
| u16 val16; |
| int i; |
| |
| printk(BIOS_INFO, " Row addr bits : %u\n", dimm->row_bits); |
| printk(BIOS_INFO, " Column addr bits : %u\n", dimm->col_bits); |
| printk(BIOS_INFO, " Number of ranks : %u\n", dimm->ranks); |
| printk(BIOS_INFO, " DIMM Capacity : %u MB\n", dimm->size_mb); |
| |
| /* CAS Latencies Supported */ |
| val16 = dimm->cas_supported; |
| printk(BIOS_INFO, " CAS latencies :"); |
| i = 0; |
| do { |
| if (val16 & 1) |
| printk(BIOS_INFO, " %u", i + 4); |
| i++; |
| val16 >>= 1; |
| } while (val16); |
| printk(BIOS_INFO, "\n"); |
| |
| print_ns(" tCKmin : ", dimm->tCK); |
| print_ns(" tAAmin : ", dimm->tAA); |
| print_ns(" tWRmin : ", dimm->tWR); |
| print_ns(" tRCDmin : ", dimm->tRCD); |
| print_ns(" tRRDmin : ", dimm->tRRD); |
| print_ns(" tRPmin : ", dimm->tRP); |
| print_ns(" tRASmin : ", dimm->tRAS); |
| print_ns(" tRCmin : ", dimm->tRC); |
| print_ns(" tRFCmin : ", dimm->tRFC); |
| print_ns(" tWTRmin : ", dimm->tWTR); |
| print_ns(" tRTPmin : ", dimm->tRTP); |
| print_ns(" tFAWmin : ", dimm->tFAW); |
| /* Those values are only relevant if an XMP profile sets them */ |
| if (dimm->tCWL) |
| print_ns(" tCWLmin : ", dimm->tCWL); |
| if (dimm->tCMD) |
| printk(BIOS_INFO, " tCMDmin : %3u\n", DIV_ROUND_UP(dimm->tCMD, 256)); |
| } |