| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <acpi/acpi_device.h> |
| #include <acpi/acpigen.h> |
| #include <console/console.h> |
| #include <device/i2c_simple.h> |
| #include <device/device.h> |
| #include <device/path.h> |
| #include <string.h> |
| #include "chip.h" |
| |
| #define I2C_SX9324_ACPI_ID "STH9324" |
| #define I2C_SX9324_CHIP_NAME "Semtech SX9324" |
| |
| #define REGISTER(NAME) acpi_dp_add_integer(dsd, \ |
| I2C_SX9324_ACPI_ID "," #NAME, \ |
| config->NAME) |
| |
| static void i2c_sx9324_fill_ssdt(const struct device *dev) |
| { |
| struct drivers_i2c_sx9324_config *config = dev->chip_info; |
| const char *scope = acpi_device_scope(dev); |
| struct acpi_i2c i2c = { |
| .address = dev->path.i2c.device, |
| .mode_10bit = dev->path.i2c.mode_10bit, |
| .speed = I2C_SPEED_FAST, |
| .resource = scope, |
| }; |
| struct acpi_dp *dsd; |
| |
| if (!scope || !config) |
| return; |
| |
| if (config->speed) |
| i2c.speed = config->speed; |
| |
| /* Device */ |
| acpigen_write_scope(scope); |
| acpigen_write_device(acpi_device_name(dev)); |
| acpigen_write_name_string("_HID", I2C_SX9324_ACPI_ID); |
| acpigen_write_name_integer("_UID", config->uid); |
| acpigen_write_name_string("_DDN", config->desc); |
| acpigen_write_STA(acpi_device_status(dev)); |
| |
| /* Resources */ |
| acpigen_write_name("_CRS"); |
| acpigen_write_resourcetemplate_header(); |
| acpi_device_write_i2c(&i2c); |
| |
| if (config->irq_gpio.pin_count) |
| acpi_device_write_gpio(&config->irq_gpio); |
| else |
| acpi_device_write_interrupt(&config->irq); |
| |
| acpigen_write_resourcetemplate_footer(); |
| |
| /* DSD */ |
| dsd = acpi_dp_new_table("_DSD"); |
| acpi_dp_add_integer_array(dsd, "semtech,ph0-pin", config->ph0_pin, ARRAY_SIZE(config->ph0_pin)); |
| acpi_dp_add_integer_array(dsd, "semtech,ph1-pin", config->ph1_pin, ARRAY_SIZE(config->ph1_pin)); |
| acpi_dp_add_integer_array(dsd, "semtech,ph2-pin", config->ph2_pin, ARRAY_SIZE(config->ph2_pin)); |
| acpi_dp_add_integer_array(dsd, "semtech,ph3-pin", config->ph3_pin, ARRAY_SIZE(config->ph3_pin)); |
| acpi_dp_add_integer(dsd, "semtech,ph01-resolution", config->ph01_resolution); |
| acpi_dp_add_integer(dsd, "semtech,ph23-resolution", config->ph23_resolution); |
| acpi_dp_add_integer(dsd, "semtech,startup-sensor", config->startup_sensor); |
| acpi_dp_add_integer(dsd, "semtech,ph01-proxraw-strength", config->ph01_proxraw_strength); |
| acpi_dp_add_integer(dsd, "semtech,ph23-proxraw-strength", config->ph23_proxraw_strength); |
| acpi_dp_add_integer(dsd, "semtech,avg-pos-strength", config->avg_pos_strength); |
| acpi_dp_add_integer(dsd, "semtech,input-precharge-resistor-ohms", config->input_precharge_resistor_ohms); |
| acpi_dp_add_integer(dsd, "semtech,input-analog-gain", config->input_analog_gain); |
| acpi_dp_add_string(dsd, "semtech,cs-idle-sleep", config->cs_idle_sleep); |
| acpi_dp_add_string(dsd, "semtech,int-comp-resistor", config->int_comp_resistor); |
| #if CONFIG(DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER) |
| #include "registers.h" |
| #endif |
| acpi_dp_write(dsd); |
| |
| acpigen_pop_len(); /* Device */ |
| acpigen_pop_len(); /* Scope */ |
| |
| printk(BIOS_INFO, "%s: %s at %s\n", acpi_device_path(dev), |
| config->desc ? : dev->chip_ops->name, dev_path(dev)); |
| } |
| |
| #undef REGISTER |
| |
| static const char *i2c_sx9324_acpi_name(const struct device *dev) |
| { |
| static char name[5]; |
| |
| snprintf(name, sizeof(name), "SX%02.2X", dev->path.i2c.device); |
| return name; |
| } |
| |
| static struct device_operations i2c_sx9324_ops = { |
| .read_resources = noop_read_resources, |
| .set_resources = noop_set_resources, |
| .acpi_name = i2c_sx9324_acpi_name, |
| .acpi_fill_ssdt = i2c_sx9324_fill_ssdt, |
| }; |
| |
| static void i2c_sx9324_enable(struct device *dev) |
| { |
| struct drivers_i2c_sx9324_config *config = dev->chip_info; |
| |
| if (!config) { |
| dev->enabled = 0; |
| return; |
| } |
| |
| dev->ops = &i2c_sx9324_ops; |
| |
| if (config->desc) |
| dev->name = config->desc; |
| } |
| |
| struct chip_operations drivers_i2c_sx9324_ops = { |
| .name = I2C_SX9324_CHIP_NAME, |
| .enable_dev = i2c_sx9324_enable |
| }; |