| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc. |
| */ |
| |
| /* |
| * The code in this file has been heavily based on the article "Writing a TPM |
| * Device Driver" published on http://ptgmedia.pearsoncmg.com and the |
| * submission by Stefan Berger on Qemu-devel mailing list. |
| * |
| * One principal difference is that in the simplest config the other than 0 |
| * TPM localities do not get mapped by some devices (for instance, by |
| * Infineon slb9635), so this driver provides access to locality 0 only. |
| */ |
| |
| #include <stdlib.h> |
| #include <string.h> |
| #include <delay.h> |
| #include <arch/io.h> |
| #include <console/console.h> |
| #include <tpm.h> |
| #include <arch/early_variables.h> |
| #include <device/pnp.h> |
| #include "chip.h" |
| |
| #define PREFIX "lpc_tpm: " |
| |
| /* coreboot wrapper for TPM driver (start) */ |
| #define TPM_DEBUG(fmt, args...) \ |
| if (CONFIG_DEBUG_TPM) { \ |
| printk(BIOS_DEBUG, PREFIX); \ |
| printk(BIOS_DEBUG, fmt , ##args); \ |
| } |
| #define TPM_DEBUG_IO_READ(reg_, val_) \ |
| TPM_DEBUG("Read reg 0x%x returns 0x%x\n", (reg_), (val_)) |
| #define TPM_DEBUG_IO_WRITE(reg_, val_) \ |
| TPM_DEBUG("Write reg 0x%x with 0x%x\n", (reg_), (val_)) |
| #define printf(x...) printk(BIOS_ERR, x) |
| |
| /* coreboot wrapper for TPM driver (end) */ |
| |
| #ifndef CONFIG_TPM_TIS_BASE_ADDRESS |
| /* Base TPM address standard for x86 systems */ |
| #define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000 |
| #endif |
| |
| /* the macro accepts the locality value, but only locality 0 is operational */ |
| #define TIS_REG(LOCALITY, REG) \ |
| (void *)(CONFIG_TPM_TIS_BASE_ADDRESS + (LOCALITY << 12) + REG) |
| |
| /* hardware registers' offsets */ |
| #define TIS_REG_ACCESS 0x0 |
| #define TIS_REG_INT_ENABLE 0x8 |
| #define TIS_REG_INT_VECTOR 0xc |
| #define TIS_REG_INT_STATUS 0x10 |
| #define TIS_REG_INTF_CAPABILITY 0x14 |
| #define TIS_REG_STS 0x18 |
| #define TIS_REG_BURST_COUNT 0x19 |
| #define TIS_REG_DATA_FIFO 0x24 |
| #define TIS_REG_DID_VID 0xf00 |
| #define TIS_REG_RID 0xf04 |
| |
| /* Some registers' bit field definitions */ |
| #define TIS_STS_VALID (1 << 7) /* 0x80 */ |
| #define TIS_STS_COMMAND_READY (1 << 6) /* 0x40 */ |
| #define TIS_STS_TPM_GO (1 << 5) /* 0x20 */ |
| #define TIS_STS_DATA_AVAILABLE (1 << 4) /* 0x10 */ |
| #define TIS_STS_EXPECT (1 << 3) /* 0x08 */ |
| #define TIS_STS_RESPONSE_RETRY (1 << 1) /* 0x02 */ |
| |
| #define TIS_ACCESS_TPM_REG_VALID_STS (1 << 7) /* 0x80 */ |
| #define TIS_ACCESS_ACTIVE_LOCALITY (1 << 5) /* 0x20 */ |
| #define TIS_ACCESS_BEEN_SEIZED (1 << 4) /* 0x10 */ |
| #define TIS_ACCESS_SEIZE (1 << 3) /* 0x08 */ |
| #define TIS_ACCESS_PENDING_REQUEST (1 << 2) /* 0x04 */ |
| #define TIS_ACCESS_REQUEST_USE (1 << 1) /* 0x02 */ |
| #define TIS_ACCESS_TPM_ESTABLISHMENT (1 << 0) /* 0x01 */ |
| |
| /* |
| * Error value returned if a tpm register does not enter the expected state |
| * after continuous polling. No actual TPM register reading ever returns ~0, |
| * so this value is a safe error indication to be mixed with possible status |
| * register values. |
| */ |
| #define TPM_TIMEOUT_ERR (~0) |
| |
| /* Error value returned on various TPM driver errors */ |
| #define TPM_DRIVER_ERR (~0) |
| |
| /* 1 second is plenty for anything TPM does.*/ |
| #define MAX_DELAY_US (1000 * 1000) |
| |
| /* |
| * Structures defined below allow creating descriptions of TPM vendor/device |
| * ID information for run time discovery. The only device the system knows |
| * about at this time is Infineon slb9635 |
| */ |
| struct device_name { |
| u16 dev_id; |
| const char * const dev_name; |
| }; |
| |
| struct vendor_name { |
| u16 vendor_id; |
| const char * vendor_name; |
| const struct device_name* dev_names; |
| }; |
| |
| static const struct device_name atmel_devices[] = { |
| {0x3204, "AT97SC3204"}, |
| {0xffff} |
| }; |
| |
| static const struct device_name infineon_devices[] = { |
| {0x000b, "SLB9635 TT 1.2"}, |
| {0x001a, "SLB9660 TT 1.2"}, |
| {0xffff} |
| }; |
| |
| static const struct device_name nuvoton_devices[] = { |
| {0x00fe, "NPCT420AA V2"}, |
| {0xffff} |
| }; |
| |
| static const struct device_name stmicro_devices[] = { |
| {0x0000, "ST33ZP24" }, |
| {0xffff} |
| }; |
| |
| static const struct vendor_name vendor_names[] = { |
| {0x1114, "Atmel", atmel_devices}, |
| {0x15d1, "Infineon", infineon_devices}, |
| {0x1050, "Nuvoton", nuvoton_devices}, |
| {0x104a, "ST Microelectronics", stmicro_devices}, |
| }; |
| |
| /* |
| * Cached vendor/device ID pair to indicate that the device has been already |
| * discovered |
| */ |
| static u32 vendor_dev_id CAR_GLOBAL; |
| |
| static inline u8 tpm_read_status(int locality) |
| { |
| u8 value = read8(TIS_REG(locality, TIS_REG_STS)); |
| TPM_DEBUG_IO_READ(TIS_REG_STS, value); |
| return value; |
| } |
| |
| static inline void tpm_write_status(u8 sts, int locality) |
| { |
| TPM_DEBUG_IO_WRITE(TIS_REG_STS, sts); |
| write8(TIS_REG(locality, TIS_REG_STS), sts); |
| } |
| |
| static inline u8 tpm_read_data(int locality) |
| { |
| u8 value = read8(TIS_REG(locality, TIS_REG_DATA_FIFO)); |
| TPM_DEBUG_IO_READ(TIS_REG_DATA_FIFO, value); |
| return value; |
| } |
| |
| static inline void tpm_write_data(u8 data, int locality) |
| { |
| TPM_DEBUG_IO_WRITE(TIS_REG_STS, data); |
| write8(TIS_REG(locality, TIS_REG_DATA_FIFO), data); |
| } |
| |
| static inline u16 tpm_read_burst_count(int locality) |
| { |
| u16 count; |
| count = read8(TIS_REG(locality, TIS_REG_BURST_COUNT)); |
| count |= read8(TIS_REG(locality, TIS_REG_BURST_COUNT + 1)) << 8; |
| TPM_DEBUG_IO_READ(TIS_REG_BURST_COUNT, count); |
| return count; |
| } |
| |
| static inline u8 tpm_read_access(int locality) |
| { |
| u8 value = read8(TIS_REG(locality, TIS_REG_ACCESS)); |
| TPM_DEBUG_IO_READ(TIS_REG_ACCESS, value); |
| return value; |
| } |
| |
| static inline void tpm_write_access(u8 data, int locality) |
| { |
| TPM_DEBUG_IO_WRITE(TIS_REG_ACCESS, data); |
| write8(TIS_REG(locality, TIS_REG_ACCESS), data); |
| } |
| |
| static inline u32 tpm_read_did_vid(int locality) |
| { |
| u32 value = read32(TIS_REG(locality, TIS_REG_DID_VID)); |
| TPM_DEBUG_IO_READ(TIS_REG_DID_VID, value); |
| return value; |
| } |
| |
| static inline void tpm_write_int_vector(int vector, int locality) |
| { |
| TPM_DEBUG_IO_WRITE(TIS_REG_INT_VECTOR, vector); |
| write8(TIS_REG(locality, TIS_REG_INT_VECTOR), vector & 0xf); |
| } |
| |
| static inline void tpm_write_int_polarity(int polarity, int locality) |
| { |
| /* Set polarity and leave all other bits at 0 */ |
| u32 value = (polarity & 0x3) << 3; |
| TPM_DEBUG_IO_WRITE(TIS_REG_INT_ENABLE, value); |
| write32(TIS_REG(locality, TIS_REG_INT_ENABLE), value); |
| } |
| |
| /* |
| * tis_wait_sts() |
| * |
| * Wait for at least a second for a status to change its state to match the |
| * expected state. Normally the transition happens within microseconds. |
| * |
| * @locality - locality |
| * @mask - bitmask for the bitfield(s) to watch |
| * @expected - value the field(s) are supposed to be set to |
| * |
| * Returns 0 on success or TPM_TIMEOUT_ERR on timeout. |
| */ |
| static int tis_wait_sts(int locality, u8 mask, u8 expected) |
| { |
| u32 time_us = MAX_DELAY_US; |
| while (time_us > 0) { |
| u8 value = tpm_read_status(locality); |
| if ((value & mask) == expected) |
| return 0; |
| udelay(1); /* 1 us */ |
| time_us--; |
| } |
| return TPM_TIMEOUT_ERR; |
| } |
| |
| static inline int tis_wait_ready(int locality) |
| { |
| return tis_wait_sts(locality, TIS_STS_COMMAND_READY, |
| TIS_STS_COMMAND_READY); |
| } |
| |
| static inline int tis_wait_valid(int locality) |
| { |
| return tis_wait_sts(locality, TIS_STS_VALID, TIS_STS_VALID); |
| } |
| |
| static inline int tis_wait_valid_data(int locality) |
| { |
| const u8 has_data = TIS_STS_DATA_AVAILABLE | TIS_STS_VALID; |
| return tis_wait_sts(locality, has_data, has_data); |
| } |
| |
| static inline int tis_has_valid_data(int locality) |
| { |
| const u8 has_data = TIS_STS_DATA_AVAILABLE | TIS_STS_VALID; |
| return (tpm_read_status(locality) & has_data) == has_data; |
| } |
| |
| static inline int tis_expect_data(int locality) |
| { |
| return !!(tpm_read_status(locality) & TIS_STS_EXPECT); |
| } |
| |
| /* |
| * tis_wait_access() |
| * |
| * Wait for at least a second for a access to change its state to match the |
| * expected state. Normally the transition happens within microseconds. |
| * |
| * @locality - locality |
| * @mask - bitmask for the bitfield(s) to watch |
| * @expected - value the field(s) are supposed to be set to |
| * |
| * Returns 0 on success or TPM_TIMEOUT_ERR on timeout. |
| */ |
| static int tis_wait_access(int locality, u8 mask, u8 expected) |
| { |
| u32 time_us = MAX_DELAY_US; |
| while (time_us > 0) { |
| u8 value = tpm_read_access(locality); |
| if ((value & mask) == expected) |
| return 0; |
| udelay(1); /* 1 us */ |
| time_us--; |
| } |
| return TPM_TIMEOUT_ERR; |
| } |
| |
| static inline int tis_wait_dropped_access(int locality) |
| { |
| return tis_wait_access(locality, TIS_ACCESS_ACTIVE_LOCALITY, 0); |
| } |
| |
| static inline int tis_wait_received_access(int locality) |
| { |
| return tis_wait_access(locality, TIS_ACCESS_ACTIVE_LOCALITY, |
| TIS_ACCESS_ACTIVE_LOCALITY); |
| } |
| |
| static inline int tis_has_access(int locality) |
| { |
| return !!(tpm_read_access(locality) & TIS_ACCESS_ACTIVE_LOCALITY); |
| } |
| |
| static inline void tis_request_access(int locality) |
| { |
| tpm_write_access(TIS_ACCESS_REQUEST_USE, locality); |
| } |
| |
| static inline void tis_drop_access(int locality) |
| { |
| tpm_write_access(TIS_ACCESS_ACTIVE_LOCALITY, locality); |
| } |
| |
| /* |
| * PC Client Specific TPM Interface Specification section 11.2.12: |
| * |
| * Software must be prepared to send two writes of a "1" to command ready |
| * field: the first to indicate successful read of all the data, thus |
| * clearing the data from the ReadFIFO and freeing the TPM's resources, |
| * and the second to indicate to the TPM it is about to send a new command. |
| * |
| * In practice not all TPMs behave the same so it is necessary to be |
| * flexible when trying to set command ready. |
| * |
| * Returns 0 on success if the TPM is ready for transactions. |
| * Returns TPM_TIMEOUT_ERR if the command ready bit does not get set. |
| */ |
| static int tis_command_ready(u8 locality) |
| { |
| u32 status; |
| |
| /* 1st attempt to set command ready */ |
| tpm_write_status(TIS_STS_COMMAND_READY, locality); |
| |
| /* Wait for response */ |
| status = tpm_read_status(locality); |
| |
| /* Check if command ready is set yet */ |
| if (status & TIS_STS_COMMAND_READY) |
| return 0; |
| |
| /* 2nd attempt to set command ready */ |
| tpm_write_status(TIS_STS_COMMAND_READY, locality); |
| |
| return tis_wait_ready(locality); |
| } |
| |
| /* |
| * Probe the TPM device and try determining its manufacturer/device name. |
| * |
| * Returns 0 on success (the device is found or was found during an earlier |
| * invocation) or TPM_DRIVER_ERR if the device is not found. |
| */ |
| static u32 tis_probe(void) |
| { |
| const char *device_name = "unknown"; |
| const char *vendor_name = device_name; |
| const struct device_name *dev; |
| u32 didvid; |
| u16 vid, did; |
| int i; |
| |
| if (car_get_var(vendor_dev_id)) |
| return 0; /* Already probed. */ |
| |
| didvid = tpm_read_did_vid(0); |
| if (!didvid || (didvid == 0xffffffff)) { |
| printf("%s: No TPM device found\n", __FUNCTION__); |
| return TPM_DRIVER_ERR; |
| } |
| |
| car_set_var(vendor_dev_id, didvid); |
| |
| vid = didvid & 0xffff; |
| did = (didvid >> 16) & 0xffff; |
| for (i = 0; i < ARRAY_SIZE(vendor_names); i++) { |
| int j = 0; |
| u16 known_did; |
| if (vid == vendor_names[i].vendor_id) { |
| vendor_name = vendor_names[i].vendor_name; |
| } else { |
| continue; |
| } |
| dev = &vendor_names[i].dev_names[j]; |
| while ((known_did = dev->dev_id) != 0xffff) { |
| if (known_did == did) { |
| device_name = dev->dev_name; |
| break; |
| } |
| j++; |
| dev = &vendor_names[i].dev_names[j]; |
| } |
| break; |
| } |
| /* this will have to be converted into debug printout */ |
| printf("Found TPM %s by %s\n", device_name, vendor_name); |
| return 0; |
| } |
| |
| /* |
| * tis_senddata() |
| * |
| * send the passed in data to the TPM device. |
| * |
| * @data - address of the data to send, byte by byte |
| * @len - length of the data to send |
| * |
| * Returns 0 on success, TPM_DRIVER_ERR on error (in case the device does |
| * not accept the entire command). |
| */ |
| static u32 tis_senddata(const u8 * const data, u32 len) |
| { |
| u32 offset = 0; |
| u16 burst = 0; |
| u32 max_cycles = 0; |
| u8 locality = 0; |
| |
| if (tis_wait_ready(locality)) { |
| printf("%s:%d - failed to get 'command_ready' status\n", |
| __FILE__, __LINE__); |
| return TPM_DRIVER_ERR; |
| } |
| burst = tpm_read_burst_count(locality); |
| |
| while (1) { |
| unsigned count; |
| |
| /* Wait till the device is ready to accept more data. */ |
| while (!burst) { |
| if (max_cycles++ == MAX_DELAY_US) { |
| printf("%s:%d failed to feed %d bytes of %d\n", |
| __FILE__, __LINE__, len - offset, len); |
| return TPM_DRIVER_ERR; |
| } |
| udelay(1); |
| burst = tpm_read_burst_count(locality); |
| } |
| |
| max_cycles = 0; |
| |
| /* |
| * Calculate number of bytes the TPM is ready to accept in one |
| * shot. |
| * |
| * We want to send the last byte outside of the loop (hence |
| * the -1 below) to make sure that the 'expected' status bit |
| * changes to zero exactly after the last byte is fed into the |
| * FIFO. |
| */ |
| count = min(burst, len - offset - 1); |
| while (count--) |
| tpm_write_data(data[offset++], locality); |
| |
| if (tis_wait_valid(locality) || !tis_expect_data(locality)) { |
| printf("%s:%d TPM command feed overflow\n", |
| __FILE__, __LINE__); |
| return TPM_DRIVER_ERR; |
| } |
| |
| burst = tpm_read_burst_count(locality); |
| if ((offset == (len - 1)) && burst) |
| /* |
| * We need to be able to send the last byte to the |
| * device, so burst size must be nonzero before we |
| * break out. |
| */ |
| break; |
| } |
| |
| /* Send the last byte. */ |
| tpm_write_data(data[offset++], locality); |
| |
| /* |
| * Verify that TPM does not expect any more data as part of this |
| * command. |
| */ |
| if (tis_wait_valid(locality) || tis_expect_data(locality)) { |
| printf("%s:%d unexpected TPM status 0x%x\n", |
| __FILE__, __LINE__, tpm_read_status(locality)); |
| return TPM_DRIVER_ERR; |
| } |
| |
| /* OK, sitting pretty, let's start the command execution. */ |
| tpm_write_status(TIS_STS_TPM_GO, locality); |
| |
| return 0; |
| } |
| |
| /* |
| * tis_readresponse() |
| * |
| * read the TPM device response after a command was issued. |
| * |
| * @buffer - address where to read the response, byte by byte. |
| * @len - pointer to the size of buffer |
| * |
| * On success stores the number of received bytes to len and returns 0. On |
| * errors (misformatted TPM data or synchronization problems) returns |
| * TPM_DRIVER_ERR. |
| */ |
| static u32 tis_readresponse(u8 *buffer, size_t *len) |
| { |
| u16 burst_count; |
| u32 offset = 0; |
| u8 locality = 0; |
| u32 expected_count = *len; |
| int max_cycles = 0; |
| |
| /* Wait for the TPM to process the command */ |
| if (tis_wait_valid_data(locality)) { |
| printf("%s:%d failed processing command\n", __FILE__, __LINE__); |
| return TPM_DRIVER_ERR; |
| } |
| |
| do { |
| while ((burst_count = tpm_read_burst_count(locality)) == 0) { |
| if (max_cycles++ == MAX_DELAY_US) { |
| printf("%s:%d TPM stuck on read\n", |
| __FILE__, __LINE__); |
| return TPM_DRIVER_ERR; |
| } |
| udelay(1); |
| } |
| |
| max_cycles = 0; |
| |
| while (burst_count-- && (offset < expected_count)) { |
| buffer[offset++] = tpm_read_data(locality); |
| if (offset == 6) { |
| /* |
| * We got the first six bytes of the reply, |
| * let's figure out how many bytes to expect |
| * total - it is stored as a 4 byte number in |
| * network order, starting with offset 2 into |
| * the body of the reply. |
| */ |
| u32 real_length; |
| memcpy(&real_length, |
| buffer + 2, |
| sizeof(real_length)); |
| expected_count = be32_to_cpu(real_length); |
| |
| if ((expected_count < offset) || |
| (expected_count > *len)) { |
| printf("%s:%d bad response size %d\n", |
| __FILE__, __LINE__, |
| expected_count); |
| return TPM_DRIVER_ERR; |
| } |
| } |
| } |
| |
| /* Wait for the next portion */ |
| if (tis_wait_valid(locality)) { |
| printf("%s:%d failed to read response\n", |
| __FILE__, __LINE__); |
| return TPM_DRIVER_ERR; |
| } |
| |
| if (offset == expected_count) |
| break; /* We got all we need */ |
| |
| } while (tis_has_valid_data(locality)); |
| |
| /* * Make sure we indeed read all there was. */ |
| if (tis_has_valid_data(locality)) { |
| printf("%s:%d wrong receive status: %x %d bytes left\n", |
| __FILE__, __LINE__, tpm_read_status(locality), |
| tpm_read_burst_count(locality)); |
| return TPM_DRIVER_ERR; |
| } |
| |
| /* Tell the TPM that we are done. */ |
| if (tis_command_ready(locality) == TPM_TIMEOUT_ERR) |
| return TPM_DRIVER_ERR; |
| |
| *len = offset; |
| return 0; |
| } |
| |
| /* |
| * tis_init() |
| * |
| * Initialize the TPM device. Returns 0 on success or TPM_DRIVER_ERR on |
| * failure (in case device probing did not succeed). |
| */ |
| int tis_init(void) |
| { |
| if (tis_probe()) |
| return TPM_DRIVER_ERR; |
| return 0; |
| } |
| |
| /* |
| * tis_open() |
| * |
| * Requests access to locality 0 for the caller. After all commands have been |
| * completed the caller is supposed to call tis_close(). |
| * |
| * Returns 0 on success, TPM_DRIVER_ERR on failure. |
| */ |
| int tis_open(void) |
| { |
| u8 locality = 0; /* we use locality zero for everything */ |
| |
| if (tis_close()) |
| return TPM_DRIVER_ERR; |
| |
| /* now request access to locality */ |
| tis_request_access(locality); |
| |
| /* did we get a lock? */ |
| if (tis_wait_received_access(locality)) { |
| printf("%s:%d - failed to lock locality %d\n", |
| __FILE__, __LINE__, locality); |
| return TPM_DRIVER_ERR; |
| } |
| |
| /* Certain TPMs seem to need some delay here or they hang... */ |
| udelay(10); |
| |
| if (tis_command_ready(locality) == TPM_TIMEOUT_ERR) |
| return TPM_DRIVER_ERR; |
| |
| return 0; |
| } |
| |
| /* |
| * tis_close() |
| * |
| * terminate the current session with the TPM by releasing the locked |
| * locality. Returns 0 on success of TPM_DRIVER_ERR on failure (in case lock |
| * removal did not succeed). |
| */ |
| int tis_close(void) |
| { |
| u8 locality = 0; |
| if (tis_has_access(locality)) { |
| tis_drop_access(locality); |
| if (tis_wait_dropped_access(locality)) { |
| printf("%s:%d - failed to release locality %d\n", |
| __FILE__, __LINE__, locality); |
| return TPM_DRIVER_ERR; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * tis_sendrecv() |
| * |
| * Send the requested data to the TPM and then try to get its response |
| * |
| * @sendbuf - buffer of the data to send |
| * @send_size size of the data to send |
| * @recvbuf - memory to save the response to |
| * @recv_len - pointer to the size of the response buffer |
| * |
| * Returns 0 on success (and places the number of response bytes at recv_len) |
| * or TPM_DRIVER_ERR on failure. |
| */ |
| int tis_sendrecv(const uint8_t *sendbuf, size_t send_size, |
| uint8_t *recvbuf, size_t *recv_len) |
| { |
| if (tis_senddata(sendbuf, send_size)) { |
| printf("%s:%d failed sending data to TPM\n", |
| __FILE__, __LINE__); |
| return TPM_DRIVER_ERR; |
| } |
| |
| return tis_readresponse(recvbuf, recv_len); |
| } |
| |
| #ifdef __RAMSTAGE__ |
| |
| /* |
| * tis_setup_interrupt() |
| * |
| * Set up the interrupt vector and polarity for locality 0 and |
| * disable all interrupts so they are unused in firmware but can |
| * be enabled by the OS. |
| * |
| * The values used here must match what is passed in the TPM ACPI |
| * device if ACPI is used on the platform. |
| * |
| * @vector - TPM interrupt vector |
| * @polarity - TPM interrupt polarity |
| * |
| * Returns 0 on success, TPM_DRIVER_ERR on failure. |
| */ |
| static int tis_setup_interrupt(int vector, int polarity) |
| { |
| u8 locality = 0; |
| int has_access = tis_has_access(locality); |
| |
| /* Open connection and request access if not already granted */ |
| if (!has_access && tis_open() < 0) |
| return TPM_DRIVER_ERR; |
| |
| /* Set TPM interrupt vector */ |
| tpm_write_int_vector(vector, locality); |
| |
| /* Set TPM interupt polarity and disable interrupts */ |
| tpm_write_int_polarity(polarity, locality); |
| |
| /* Close connection if it was opened */ |
| if (!has_access && tis_close() < 0) |
| return TPM_DRIVER_ERR; |
| |
| return 0; |
| } |
| |
| static void lpc_tpm_read_resources(struct device *dev) |
| { |
| /* Static 5K memory region specified in Kconfig */ |
| mmio_resource(dev, 0, CONFIG_TPM_TIS_BASE_ADDRESS >> 10, 0x5000 >> 10); |
| } |
| |
| static void lpc_tpm_set_resources(struct device *dev) |
| { |
| tpm_config_t *config = (tpm_config_t *)dev->chip_info; |
| struct resource *res; |
| |
| for (res = dev->resource_list; res; res = res->next) { |
| if (!(res->flags & IORESOURCE_ASSIGNED)) |
| continue; |
| |
| if (res->flags & IORESOURCE_IRQ) { |
| /* Set interrupt vector */ |
| tis_setup_interrupt((int)res->base, |
| config->irq_polarity); |
| } else { |
| continue; |
| } |
| |
| res->flags |= IORESOURCE_STORED; |
| report_resource_stored(dev, res, " <tpm>"); |
| } |
| } |
| |
| static struct device_operations lpc_tpm_ops = { |
| .read_resources = &lpc_tpm_read_resources, |
| .set_resources = &lpc_tpm_set_resources, |
| }; |
| |
| static struct pnp_info pnp_dev_info[] = { |
| { .flags = PNP_IRQ0 } |
| }; |
| |
| static void enable_dev(struct device *dev) |
| { |
| pnp_enable_devices(dev, &lpc_tpm_ops, |
| ARRAY_SIZE(pnp_dev_info), pnp_dev_info); |
| } |
| |
| struct chip_operations drivers_pc80_tpm_ops = { |
| CHIP_NAME("LPC TPM") |
| .enable_dev = enable_dev |
| }; |
| |
| #endif /* __RAMSTAGE__ */ |