| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef _SOC_CHIP_H_ |
| #define _SOC_CHIP_H_ |
| |
| #include <drivers/i2c/designware/dw_i2c.h> |
| #include <gpio.h> |
| #include <intelblocks/cfg.h> |
| #include <intelblocks/gspi.h> |
| #include <intelblocks/power_limit.h> |
| #include <intelblocks/pcie_rp.h> |
| #include <intelblocks/tcss.h> |
| #include <soc/gpe.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pmc.h> |
| #include <soc/serialio.h> |
| #include <soc/usb.h> |
| #include <stdint.h> |
| |
| /* Types of different SKUs */ |
| enum soc_intel_meteorlake_power_limits { |
| MTL_P_POWER_LIMITS_1, |
| MTL_P_POWER_LIMITS_2, |
| MTL_P_POWER_LIMITS_3, |
| MTL_P_POWER_LIMITS_4, |
| MTL_POWER_LIMITS_COUNT |
| }; |
| |
| /* Types of display ports */ |
| enum ddi_ports { |
| DDI_PORT_A, |
| DDI_PORT_B, |
| DDI_PORT_C, |
| DDI_PORT_1, |
| DDI_PORT_2, |
| DDI_PORT_3, |
| DDI_PORT_4, |
| DDI_PORT_COUNT, |
| }; |
| |
| enum ddi_port_flags { |
| DDI_ENABLE_DDC = 1 << 0, |
| DDI_ENABLE_HPD = 1 << 1, |
| }; |
| |
| /* |
| * The Max Pkg Cstate |
| * Values 0 - C0/C1, 1 - C2, 2 - C3, 3 - C6, 4 - C7, 5 - C7S, 6 - C8, 7 - C9, 8 - C10, |
| * 254 - CPU Default , 255 - Auto. |
| */ |
| enum pkgcstate_limit { |
| LIMIT_C0_C1 = 0, |
| LIMIT_C2 = 1, |
| LIMIT_C3 = 2, |
| LIMIT_C6 = 3, |
| LIMIT_C7 = 4, |
| LIMIT_C7S = 5, |
| LIMIT_C8 = 6, |
| LIMIT_C9 = 7, |
| LIMIT_C10 = 8, |
| LIMIT_CPUDEFAULT = 254, |
| LIMIT_AUTO = 255, |
| }; |
| |
| /* Bit values for use in LpmStateEnableMask. */ |
| enum lpm_state_mask { |
| LPM_S0i2_0 = BIT(0), |
| LPM_S0i2_1 = BIT(1), |
| LPM_S0i2_2 = BIT(2), |
| LPM_S0i3_0 = BIT(3), |
| LPM_S0i3_1 = BIT(4), |
| LPM_S0i3_2 = BIT(5), |
| LPM_S0i3_3 = BIT(6), |
| LPM_S0i3_4 = BIT(7), |
| LPM_S0iX_ALL = LPM_S0i2_0 | LPM_S0i2_1 | LPM_S0i2_2 |
| | LPM_S0i3_0 | LPM_S0i3_1 | LPM_S0i3_2 | LPM_S0i3_3 | LPM_S0i3_4, |
| }; |
| |
| struct soc_intel_meteorlake_config { |
| |
| /* Common struct containing soc config data required by common code */ |
| struct soc_intel_common_config common_soc_config; |
| |
| /* Common struct containing power limits configuration information */ |
| struct soc_power_limits_config power_limits_config[MTL_POWER_LIMITS_COUNT]; |
| |
| /* Gpio group routed to each dword of the GPE0 block. Values are |
| * of the form PMC_GPP_[A:U] or GPD. */ |
| uint8_t pmc_gpe0_dw0; /* GPE0_31_0 STS/EN */ |
| uint8_t pmc_gpe0_dw1; /* GPE0_63_32 STS/EN */ |
| uint8_t pmc_gpe0_dw2; /* GPE0_95_64 STS/EN */ |
| |
| /* Generic IO decode ranges */ |
| uint32_t gen1_dec; |
| uint32_t gen2_dec; |
| uint32_t gen3_dec; |
| uint32_t gen4_dec; |
| |
| /* Enable S0iX support */ |
| int s0ix_enable; |
| /* Support for TCSS xhci, xdci, TBT PCIe root ports and DMA controllers */ |
| uint8_t tcss_d3_hot_disable; |
| /* Enable DPTF support */ |
| int dptf_enable; |
| |
| /* Deep SX enable for both AC and DC */ |
| int deep_s3_enable_ac; |
| int deep_s3_enable_dc; |
| int deep_s5_enable_ac; |
| int deep_s5_enable_dc; |
| |
| /* Deep Sx Configuration |
| * DSX_EN_WAKE_PIN - Enable WAKE# pin |
| * DSX_EN_LAN_WAKE_PIN - Enable LAN_WAKE# pin |
| * DSX_DIS_AC_PRESENT_PD - Disable pull-down on AC_PRESENT pin */ |
| uint32_t deep_sx_config; |
| |
| /* TCC activation offset */ |
| uint32_t tcc_offset; |
| |
| /* System Agent dynamic frequency support. Only effects ULX/ULT CPUs. |
| * When enabled memory will be training at two different frequencies. |
| * 0:Disabled, 1:Enabled |
| */ |
| enum { |
| SAGV_DISABLED, |
| SAGV_ENABLED, |
| } sagv; |
| |
| /* Rank Margin Tool. 1:Enable, 0:Disable */ |
| uint8_t rmt; |
| |
| /* USB related */ |
| struct usb2_port_config usb2_ports[CONFIG_SOC_INTEL_USB2_DEV_MAX]; |
| struct usb3_port_config usb3_ports[CONFIG_SOC_INTEL_USB3_DEV_MAX]; |
| /* Wake Enable Bitmap for USB2 ports */ |
| uint16_t usb2_wake_enable_bitmap; |
| /* Wake Enable Bitmap for USB3 ports */ |
| uint16_t usb3_wake_enable_bitmap; |
| /* Program OC pins for TCSS */ |
| struct tcss_port_config tcss_ports[MAX_TYPE_C_PORTS]; |
| /* Validate TBT firmware authenticated and loaded into IMR */ |
| bool tbt_authentication; |
| |
| /* SATA related */ |
| uint8_t sata_mode; |
| uint8_t sata_salp_support; |
| uint8_t sata_ports_enable[8]; |
| uint8_t sata_ports_dev_slp[8]; |
| |
| /* |
| * Enable(0)/Disable(1) SATA Power Optimizer on PCH side. |
| * Default 0. Setting this to 1 disables the SATA Power Optimizer. |
| */ |
| uint8_t sata_pwr_optimize_disable; |
| |
| /* |
| * SATA Port Enable Dito Config. |
| * Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). |
| */ |
| uint8_t sata_ports_enable_dito_config[8]; |
| |
| /* SataPortsDmVal is the DITO multiplier. Default is 15. */ |
| uint8_t sata_ports_dm_val[8]; |
| /* SataPortsDitoVal is the DEVSLP Idle Timeout, default is 625ms */ |
| uint16_t sata_ports_dito_val[8]; |
| |
| /* Audio related */ |
| uint8_t pch_hda_dsp_enable; |
| |
| /* iDisp-Link T-Mode 0: 2T, 2: 4T, 3: 8T, 4: 16T */ |
| enum { |
| HDA_TMODE_2T = 0, |
| HDA_TMODE_4T = 2, |
| HDA_TMODE_8T = 3, |
| HDA_TMODE_16T = 4, |
| } pch_hda_idisp_link_tmode; |
| |
| /* iDisp-Link Freq 4: 96MHz, 3: 48MHz. */ |
| enum { |
| HDA_LINKFREQ_48MHZ = 3, |
| HDA_LINKFREQ_96MHZ = 4, |
| } pch_hda_idisp_link_frequency; |
| |
| bool pch_hda_idisp_codec_enable; |
| |
| struct pcie_rp_config pcie_rp[CONFIG_MAX_ROOT_PORTS]; |
| uint8_t pcie_clk_config_flag[CONFIG_MAX_PCIE_CLOCK_SRC]; |
| |
| /* Gfx related */ |
| enum { |
| IGD_SM_0MB = 0x00, |
| IGD_SM_32MB = 0x01, |
| IGD_SM_64MB = 0x02, |
| IGD_SM_96MB = 0x03, |
| IGD_SM_128MB = 0x04, |
| IGD_SM_160MB = 0x05, |
| IGD_SM_4MB = 0xF0, |
| IGD_SM_8MB = 0xF1, |
| IGD_SM_12MB = 0xF2, |
| IGD_SM_16MB = 0xF3, |
| IGD_SM_20MB = 0xF4, |
| IGD_SM_24MB = 0xF5, |
| IGD_SM_28MB = 0xF6, |
| IGD_SM_36MB = 0xF8, |
| IGD_SM_40MB = 0xF9, |
| IGD_SM_44MB = 0xFA, |
| IGD_SM_48MB = 0xFB, |
| IGD_SM_52MB = 0xFC, |
| IGD_SM_56MB = 0xFD, |
| IGD_SM_60MB = 0xFE, |
| } igd_dvmt50_pre_alloc; |
| uint8_t skip_ext_gfx_scan; |
| |
| /* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */ |
| uint8_t eist_enable; |
| |
| uint8_t PmTimerDisabled; |
| /* |
| * SerialIO device mode selection: |
| * PchSerialIoDisabled, |
| * PchSerialIoPci, |
| * PchSerialIoHidden, |
| * PchSerialIoLegacyUart, |
| * PchSerialIoSkipInit |
| */ |
| uint8_t serial_io_i2c_mode[CONFIG_SOC_INTEL_I2C_DEV_MAX]; |
| uint8_t serial_io_gspi_mode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; |
| uint8_t serial_io_uart_mode[CONFIG_SOC_INTEL_UART_DEV_MAX]; |
| /* |
| * GSPIn Default Chip Select Mode: |
| * 0:Hardware Mode, |
| * 1:Software Mode |
| */ |
| uint8_t serial_io_gspi_cs_mode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; |
| /* |
| * GSPIn Default Chip Select State: |
| * 0: Low, |
| * 1: High |
| */ |
| uint8_t serial_io_gspi_cs_state[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; |
| |
| /* CNVi WiFi Core Enable/Disable */ |
| bool cnvi_wifi_core; |
| |
| /* CNVi BT Core Enable/Disable */ |
| bool cnvi_bt_core; |
| |
| /* CNVi BT Audio Offload: Enable/Disable BT Audio Offload. */ |
| bool cnvi_bt_audio_offload; |
| |
| /* |
| * These GPIOs will be programmed by the IOM to handle biasing of the |
| * Type-C aux (SBU) signals when certain alternate modes are used. |
| * `pad_auxn_dc` should be assigned to the GPIO pad providing negative |
| * bias (name usually contains `AUXN_DC` or `AUX_N`); similarly, |
| * `pad_auxp_dc` should be assigned to the GPIO providing positive bias |
| * (name often contains `AUXP_DC` or `_AUX_P`). |
| */ |
| struct typec_aux_bias_pads typec_aux_bias_pads[MAX_TYPE_C_PORTS]; |
| |
| /* |
| * SOC Aux orientation override: |
| * This is a bitfield that corresponds to up to 4 TCSS ports on MTL. |
| * Even numbered bits (0, 2, 4, 6) control the retimer being handled by SOC. |
| * Odd numbered bits (1, 3, 5, 7) control the orientation of the physical aux lines |
| * on the motherboard. |
| */ |
| uint16_t tcss_aux_ori; |
| |
| /* Connect Topology Command timeout value */ |
| uint16_t itbt_connect_topology_timeout_in_ms; |
| |
| /* |
| * Override GPIO PM configuration: |
| * 0: Use FSP default GPIO PM program, |
| * 1: coreboot to override GPIO PM program |
| */ |
| uint8_t gpio_override_pm; |
| |
| /* |
| * GPIO PM configuration: 0 to disable, 1 to enable power gating |
| * Bit 6-7: Reserved |
| * Bit 5: MISCCFG_GPSIDEDPCGEN |
| * Bit 4: MISCCFG_GPRCOMPCDLCGEN |
| * Bit 3: MISCCFG_GPRTCDLCGEN |
| * Bit 2: MISCCFG_GSXLCGEN |
| * Bit 1: MISCCFG_GPDPCGEN |
| * Bit 0: MISCCFG_GPDLCGEN |
| */ |
| uint8_t gpio_pm[TOTAL_GPIO_COMM]; |
| |
| /* DP config */ |
| /* |
| * Port config |
| * 0:Disabled, 1:eDP, 2:MIPI DSI |
| */ |
| uint8_t ddi_port_A_config; |
| uint8_t ddi_port_B_config; |
| |
| /* Enable(1)/Disable(0) HPD/DDC */ |
| uint8_t ddi_ports_config[DDI_PORT_COUNT]; |
| |
| /* |
| * Override CPU flex ratio value: |
| * CPU ratio value controls the maximum processor non-turbo ratio. |
| * Valid Range 0 to 63. |
| * |
| * In general descriptor provides option to set default cpu flex ratio. |
| * Default cpu flex ratio is 0 ensures booting with non-turbo max frequency. |
| * That's the reason FSP skips cpu_ratio override if cpu_ratio is 0. |
| * |
| * Only override CPU flex ratio if don't want to boot with non-turbo max. |
| */ |
| uint8_t cpu_ratio_override; |
| |
| /* |
| * Enable(0)/Disable(1) DMI Power Optimizer on PCH side. |
| * Default 0. Setting this to 1 disables the DMI Power Optimizer. |
| */ |
| uint8_t dmi_pwr_optimize_disable; |
| |
| /* |
| * Enable(1)/Disable(0) CPU Replacement check. |
| * Default 0. Setting this to 1 to check CPU replacement. |
| */ |
| uint8_t cpu_replacement_check; |
| |
| /* ISA Serial Base selection. */ |
| enum { |
| ISA_SERIAL_BASE_ADDR_3F8, |
| ISA_SERIAL_BASE_ADDR_2F8, |
| } isa_serial_uart_base; |
| |
| /* |
| * Assign clock source port for GbE. 0: Disable, N-1: port number |
| * Default 0. |
| */ |
| uint8_t lan_clk; |
| |
| /* |
| * Enable or Disable Package C-state Demotion. |
| * Default is set to 0. |
| * Set this to 1 in order to disable Package C-state demotion. |
| */ |
| bool disable_package_c_state_demotion; |
| |
| /* Enable PCH to CPU energy report feature. */ |
| bool pch_pm_energy_report_enable; |
| |
| /* Energy-Performance Preference (HWP feature) */ |
| bool enable_energy_perf_pref; |
| uint8_t energy_perf_pref_value; |
| |
| bool disable_vmx; |
| }; |
| |
| typedef struct soc_intel_meteorlake_config config_t; |
| |
| #endif |