| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2000 AG Electronics Ltd. |
| * Copyright (C) 2003-2004 Linux Networx |
| * Copyright (C) 2004 Tyan |
| * Copyright (C) 2010 Win Enterprises (anishp@win-ent.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <arch/io.h> |
| #include <device/device.h> |
| #include <device/pnp.h> |
| #include <superio/conf_mode.h> |
| #include <console/console.h> |
| #include <string.h> |
| #include <pc80/keyboard.h> |
| #include <pc80/mc146818rtc.h> |
| #include <stdlib.h> |
| #include "w83627hf.h" |
| |
| static void enable_hwm_smbus(struct device *dev) |
| { |
| u8 reg8; |
| |
| /* Configure pins 91/92 as SDA/SCL (I2C bus). */ |
| reg8 = pnp_read_config(dev, 0x2b); |
| reg8 &= 0x3f; |
| pnp_write_config(dev, 0x2b, reg8); |
| } |
| |
| static void init_acpi(struct device *dev) |
| { |
| u8 value = 0x20; /* FIXME: The 0x20 value here is never used? */ |
| int power_on = 1; |
| |
| get_option(&power_on, "power_on_after_fail"); |
| |
| pnp_enter_conf_mode(dev); |
| pnp_set_logical_device(dev); |
| value = pnp_read_config(dev, 0xE4); |
| value &= ~(3 << 5); |
| if (power_on) |
| value |= (1 << 5); |
| pnp_write_config(dev, 0xE4, value); |
| pnp_exit_conf_mode(dev); |
| } |
| |
| static void init_hwm(u16 base) |
| { |
| u8 reg, value; |
| int i; |
| |
| u8 hwm_reg_values[] = { |
| /* reg mask data */ |
| 0x40, 0xff, 0x81, /* Start HWM. */ |
| 0x48, 0xaa, 0x2a, /* Set SMBus base to 0x2a (0x54 >> 1). */ |
| 0x4a, 0x21, 0x21, /* Set T2 SMBus base to 0x92>>1 and T3 SMBus base to 0x94>>1. */ |
| 0x4e, 0x80, 0x00, |
| 0x43, 0x00, 0xff, |
| 0x44, 0x00, 0x3f, |
| 0x4c, 0xbf, 0x18, |
| 0x4d, 0xff, 0x80, /* Turn off beep */ |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(hwm_reg_values); i += 3) { |
| reg = hwm_reg_values[i]; |
| value = pnp_read_index(base, reg); |
| value &= 0xff & hwm_reg_values[i + 1]; |
| value |= 0xff & hwm_reg_values[i + 2]; |
| printk(BIOS_DEBUG, "base = 0x%04x, reg = 0x%02x, " |
| "value = 0x%02x\n", base, reg, value); |
| pnp_write_index(base, reg, value); |
| } |
| } |
| |
| static void w83627hf_init(struct device *dev) |
| { |
| struct resource *res0; |
| |
| if (!dev->enabled) |
| return; |
| |
| switch(dev->path.pnp.device) { |
| case W83627HF_KBC: |
| pc_keyboard_init(); |
| break; |
| case W83627HF_HWM: |
| res0 = find_resource(dev, PNP_IDX_IO0); |
| #define HWM_INDEX_PORT 5 |
| init_hwm(res0->base + HWM_INDEX_PORT); |
| break; |
| case W83627HF_ACPI: |
| init_acpi(dev); |
| break; |
| } |
| } |
| |
| static void w83627hf_pnp_enable_resources(struct device *dev) |
| { |
| pnp_enable_resources(dev); |
| |
| pnp_enter_conf_mode(dev); |
| switch(dev->path.pnp.device) { |
| case W83627HF_HWM: |
| printk(BIOS_DEBUG, "W83627HF HWM SMBus enabled\n"); |
| enable_hwm_smbus(dev); |
| break; |
| } |
| pnp_exit_conf_mode(dev); |
| } |
| |
| static struct device_operations ops = { |
| .read_resources = pnp_read_resources, |
| .set_resources = pnp_set_resources, |
| .enable_resources = w83627hf_pnp_enable_resources, |
| .enable = pnp_alt_enable, |
| .init = w83627hf_init, |
| .ops_pnp_mode = &pnp_conf_mode_8787_aa, |
| }; |
| |
| static struct pnp_info pnp_dev_info[] = { |
| { &ops, W83627HF_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, {0x07f8, 0}, }, |
| { &ops, W83627HF_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, {0x07f8, 0}, }, |
| { &ops, W83627HF_SP1, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, }, |
| { &ops, W83627HF_SP2, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, }, |
| { &ops, W83627HF_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, {0x07ff, 0}, {0x07ff, 4}, }, |
| { &ops, W83627HF_CIR, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, }, |
| { &ops, W83627HF_GAME_MIDI_GPIO1, PNP_IO0 | PNP_IO1 | PNP_IRQ0, {0x07ff, 0}, {0x07fe, 4}, }, |
| { &ops, W83627HF_GPIO2, }, |
| { &ops, W83627HF_GPIO3, }, |
| { &ops, W83627HF_ACPI, }, |
| { &ops, W83627HF_HWM, PNP_IO0 | PNP_IRQ0, {0x0ff8, 0}, }, |
| }; |
| |
| static void enable_dev(struct device *dev) |
| { |
| pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info); |
| } |
| |
| struct chip_operations superio_winbond_w83627hf_ops = { |
| CHIP_NAME("Winbond W83627HF Super I/O") |
| .enable_dev = enable_dev, |
| }; |