| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * Copyright (C) 2013, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but without any warranty; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* This file is derived from the flashrom project. */ |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <commonlib/helpers.h> |
| #include <delay.h> |
| #include <arch/io.h> |
| #include <console/console.h> |
| #include <device/pci_ids.h> |
| |
| #include <spi_flash.h> |
| #include <spi-generic.h> |
| |
| static int ich_status_poll(u16 bitmask, int wait_til_set); |
| |
| #ifdef __SMM__ |
| #include <arch/io.h> |
| #define pci_read_config_byte(dev, reg, targ)\ |
| *(targ) = pci_read_config8(dev, reg) |
| #define pci_read_config_word(dev, reg, targ)\ |
| *(targ) = pci_read_config16(dev, reg) |
| #define pci_read_config_dword(dev, reg, targ)\ |
| *(targ) = pci_read_config32(dev, reg) |
| #define pci_write_config_byte(dev, reg, val)\ |
| pci_write_config8(dev, reg, val) |
| #define pci_write_config_word(dev, reg, val)\ |
| pci_write_config16(dev, reg, val) |
| #define pci_write_config_dword(dev, reg, val)\ |
| pci_write_config32(dev, reg, val) |
| #else /* !__SMM__ */ |
| #include <device/device.h> |
| #include <device/pci.h> |
| #define pci_read_config_byte(dev, reg, targ)\ |
| *(targ) = pci_read_config8(dev, reg) |
| #define pci_read_config_word(dev, reg, targ)\ |
| *(targ) = pci_read_config16(dev, reg) |
| #define pci_read_config_dword(dev, reg, targ)\ |
| *(targ) = pci_read_config32(dev, reg) |
| #define pci_write_config_byte(dev, reg, val)\ |
| pci_write_config8(dev, reg, val) |
| #define pci_write_config_word(dev, reg, val)\ |
| pci_write_config16(dev, reg, val) |
| #define pci_write_config_dword(dev, reg, val)\ |
| pci_write_config32(dev, reg, val) |
| #endif /* !__SMM__ */ |
| |
| typedef struct spi_slave ich_spi_slave; |
| |
| static int ichspi_lock = 0; |
| |
| typedef struct ich7_spi_regs { |
| uint16_t spis; |
| uint16_t spic; |
| uint32_t spia; |
| uint64_t spid[8]; |
| uint64_t _pad; |
| uint32_t bbar; |
| uint16_t preop; |
| uint16_t optype; |
| uint8_t opmenu[8]; |
| } __attribute__((packed)) ich7_spi_regs; |
| |
| typedef struct ich9_spi_regs { |
| uint32_t bfpr; // 0 |
| uint16_t hsfs; // 4 |
| uint16_t hsfc; // 6 |
| uint32_t faddr; // 8 |
| uint32_t _reserved0; // 0xC |
| uint32_t fdata[16]; // 0x10 |
| uint32_t frap; // 0x50 |
| uint32_t freg[5]; // 0x54 |
| uint32_t _reserved1[3]; // 0x67 |
| uint32_t pr[5]; // 0x74 |
| uint32_t _reserved2[2]; // 0x88 |
| uint8_t ssfs; // 0x90 |
| uint8_t ssfc[3]; // 0x91 |
| uint16_t preop; // 0x94 |
| uint16_t optype; // 0x96 |
| uint8_t opmenu[8]; // 0x98 |
| uint32_t bbar; // 0xB0 |
| uint8_t _reserved3[12]; |
| uint32_t fdoc; |
| uint32_t fdod; |
| uint8_t _reserved4[8]; |
| uint32_t afc; |
| uint32_t lvscc; |
| uint32_t uvscc; |
| uint8_t _reserved5[4]; |
| uint32_t fpb; |
| uint8_t _reserved6[28]; |
| uint32_t srdl; |
| uint32_t srdc; |
| uint32_t srd; |
| } __attribute__((packed)) ich9_spi_regs; |
| |
| typedef struct ich10_spi_regs { |
| uint32_t bfpr; |
| uint16_t hsfs; |
| uint16_t hsfc; |
| uint32_t faddr; |
| uint32_t _reserved0; |
| uint32_t fdata[16]; |
| uint32_t fracc; |
| uint32_t freg[5]; |
| uint32_t _reserved1[3]; |
| uint32_t pr[5]; |
| uint32_t _reserved2[2]; |
| uint8_t ssfs; |
| uint8_t ssfc[3]; |
| uint16_t preop; |
| uint16_t optype; |
| uint8_t opmenu[8]; |
| uint8_t _reserved3[16]; |
| uint32_t fdoc; |
| uint32_t fdod; |
| uint8_t _reserved4[8]; |
| uint32_t afc; |
| uint32_t lvscc; |
| uint32_t uvscc; |
| uint8_t _reserved5[4]; |
| uint32_t fpb; |
| uint8_t _reserved6[36]; |
| uint32_t scs; |
| uint32_t bcr; |
| uint32_t tcgc; |
| } __attribute__((packed)) ich10_spi_regs; |
| |
| typedef struct ich_spi_controller { |
| int locked; |
| |
| uint8_t *opmenu; |
| int menubytes; |
| uint16_t *preop; |
| uint16_t *optype; |
| uint32_t *addr; |
| uint8_t *data; |
| unsigned databytes; |
| uint8_t *status; |
| uint16_t *control; |
| uint32_t *bbar; |
| uint8_t *bcr; |
| } ich_spi_controller; |
| |
| static ich_spi_controller cntlr; |
| |
| enum { |
| SPIS_SCIP = 0x0001, |
| SPIS_GRANT = 0x0002, |
| SPIS_CDS = 0x0004, |
| SPIS_FCERR = 0x0008, |
| SSFS_AEL = 0x0010, |
| SPIS_LOCK = 0x8000, |
| SPIS_RESERVED_MASK = 0x7ff0, |
| SSFS_RESERVED_MASK = 0x7fe2 |
| }; |
| |
| enum { |
| SPIC_SCGO = 0x000002, |
| SPIC_ACS = 0x000004, |
| SPIC_SPOP = 0x000008, |
| SPIC_DBC = 0x003f00, |
| SPIC_DS = 0x004000, |
| SPIC_SME = 0x008000, |
| SSFC_SCF_MASK = 0x070000, |
| SSFC_RESERVED = 0xf80000 |
| }; |
| |
| enum { |
| HSFS_FDONE = 0x0001, |
| HSFS_FCERR = 0x0002, |
| HSFS_AEL = 0x0004, |
| HSFS_BERASE_MASK = 0x0018, |
| HSFS_BERASE_SHIFT = 3, |
| HSFS_SCIP = 0x0020, |
| HSFS_FDOPSS = 0x2000, |
| HSFS_FDV = 0x4000, |
| HSFS_FLOCKDN = 0x8000 |
| }; |
| |
| enum { |
| HSFC_FGO = 0x0001, |
| HSFC_FCYCLE_MASK = 0x0006, |
| HSFC_FCYCLE_SHIFT = 1, |
| HSFC_FDBC_MASK = 0x3f00, |
| HSFC_FDBC_SHIFT = 8, |
| HSFC_FSMIE = 0x8000 |
| }; |
| |
| enum { |
| BCR_BIOSWE = 0x0001, |
| BCR_BLE = 0x0002, |
| BCR_SRC_MASK = 0x000c, |
| BCR_SRC_SHIFT = 0x0002, |
| BCR_SRC_NO_PREF = 0x0000, |
| BCR_SRC_NO_PREF_CACHE = 0x0004, |
| BCR_SRC_EN_PREF_CACHE = 0x0008, |
| BCR_TSS = 0x0010, |
| BCR_SMMBWP = 0x0020, |
| BCR_RESERVED_MASK = 0xffc0 |
| }; |
| |
| enum { |
| SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0, |
| SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1, |
| SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2, |
| SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3, |
| }; |
| |
| #if IS_ENABLED(CONFIG_DEBUG_SPI_FLASH) |
| |
| static u8 readb_(const void *addr) |
| { |
| u8 v = read8(addr); |
| printk(BIOS_DEBUG, "read %2.2x from %4.4x\n", |
| v, ((unsigned) addr & 0xffff) - 0xf020); |
| return v; |
| } |
| |
| static u16 readw_(const void *addr) |
| { |
| u16 v = read16(addr); |
| printk(BIOS_DEBUG, "read %4.4x from %4.4x\n", |
| v, ((unsigned) addr & 0xffff) - 0xf020); |
| return v; |
| } |
| |
| static u32 readl_(const void *addr) |
| { |
| u32 v = read32(addr); |
| printk(BIOS_DEBUG, "read %8.8x from %4.4x\n", |
| v, ((unsigned) addr & 0xffff) - 0xf020); |
| return v; |
| } |
| |
| static void writeb_(u8 b, const void *addr) |
| { |
| write8(addr, b); |
| printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n", |
| b, ((unsigned) addr & 0xffff) - 0xf020); |
| } |
| |
| static void writew_(u16 b, const void *addr) |
| { |
| write16(addr, b); |
| printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n", |
| b, ((unsigned) addr & 0xffff) - 0xf020); |
| } |
| |
| static void writel_(u32 b, const void *addr) |
| { |
| write32((unsigned long)addr, b); |
| printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n", |
| b, ((unsigned) addr & 0xffff) - 0xf020); |
| } |
| |
| #else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ |
| |
| #define readb_(a) read8(a) |
| #define readw_(a) read16(a) |
| #define readl_(a) read32(a) |
| #define writeb_(val, addr) write8(addr, val) |
| #define writew_(val, addr) write16(addr, val) |
| #define writel_(val, addr) write32(addr, val) |
| |
| #endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ |
| |
| static void write_reg(const void *value, void *dest, uint32_t size) |
| { |
| const uint8_t *bvalue = value; |
| uint8_t *bdest = dest; |
| |
| while (size >= 4) { |
| writel_(*(const uint32_t *)bvalue, bdest); |
| bdest += 4; bvalue += 4; size -= 4; |
| } |
| while (size) { |
| writeb_(*bvalue, bdest); |
| bdest++; bvalue++; size--; |
| } |
| } |
| |
| static void read_reg(const void *src, void *value, uint32_t size) |
| { |
| const uint8_t *bsrc = src; |
| uint8_t *bvalue = value; |
| |
| while (size >= 4) { |
| *(uint32_t *)bvalue = readl_(bsrc); |
| bsrc += 4; bvalue += 4; size -= 4; |
| } |
| while (size) { |
| *bvalue = readb_(bsrc); |
| bsrc++; bvalue++; size--; |
| } |
| } |
| |
| static void ich_set_bbar(uint32_t minaddr) |
| { |
| const uint32_t bbar_mask = 0x00ffff00; |
| uint32_t ichspi_bbar; |
| |
| if (cntlr.bbar == NULL) |
| return; |
| |
| minaddr &= bbar_mask; |
| ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask; |
| ichspi_bbar |= minaddr; |
| writel_(ichspi_bbar, cntlr.bbar); |
| } |
| |
| /* |
| * Check if this device ID matches one of supported Intel SOC devices. |
| * |
| * Return the ICH version if there is a match, or zero otherwise. |
| */ |
| static inline int get_ich_version(uint16_t device_id) |
| { |
| |
| if ((device_id >= PCI_DEVICE_ID_INTEL_RANGELEY_LPC_MIN && |
| device_id <= PCI_DEVICE_ID_INTEL_RANGELEY_LPC_MAX)) |
| return 10; |
| |
| return 0; |
| } |
| |
| void spi_init(void) |
| { |
| int ich_version = 0; |
| uint8_t bios_cntl; |
| device_t dev; |
| uint32_t ids; |
| uint16_t vendor_id, device_id; |
| |
| #ifdef __SMM__ |
| dev = PCI_DEV(0, 31, 0); |
| #else |
| dev = dev_find_slot(0, PCI_DEVFN(31, 0)); |
| #endif |
| pci_read_config_dword(dev, 0, &ids); |
| vendor_id = ids; |
| device_id = (ids >> 16); |
| |
| if (vendor_id != PCI_VENDOR_ID_INTEL) { |
| printk(BIOS_DEBUG, "SPI: No SOC found.\n"); |
| return; |
| } |
| |
| ich_version = get_ich_version(device_id); |
| |
| if (!ich_version) { |
| printk(BIOS_DEBUG, "SPI: No known SOC found.\n"); |
| return; |
| } |
| |
| switch (ich_version) { |
| case 10: |
| { |
| uint8_t *spibase; /* SPI Base Address */ |
| uint32_t sbase; /* SPI Base Address Register */ |
| pci_read_config_dword(dev, 0x54, &sbase); |
| /* Bits 31-9 are the base address, 8-4 are reserved, 3-0 are used. */ |
| spibase = (uint8_t *)(sbase & 0xffffff00); |
| ich10_spi_regs *ich10_spi = |
| (ich10_spi_regs *)(spibase); |
| ichspi_lock = readw_(&ich10_spi->hsfs) & HSFS_FLOCKDN; |
| cntlr.opmenu = ich10_spi->opmenu; |
| cntlr.menubytes = sizeof(ich10_spi->opmenu); |
| cntlr.optype = &ich10_spi->optype; |
| cntlr.addr = &ich10_spi->faddr; |
| cntlr.data = (uint8_t *)ich10_spi->fdata; |
| cntlr.databytes = sizeof(ich10_spi->fdata); |
| cntlr.status = &ich10_spi->ssfs; |
| cntlr.control = (uint16_t *)ich10_spi->ssfc; |
| cntlr.bbar = NULL; |
| cntlr.preop = &ich10_spi->preop; |
| cntlr.bcr = (uint8_t *)&ich10_spi->bcr; |
| break; |
| } |
| default: |
| printk(BIOS_DEBUG, "ICH SPI: Unrecognized ICH version %d.\n", ich_version); |
| } |
| |
| ich_set_bbar(0); |
| |
| /* Disable the BIOS write protect so write commands are allowed. */ |
| switch (ich_version) { |
| case 10: |
| { |
| /* Deassert SMM BIOS write protect(SMM BWP) and assert enable flash write(BIOSWE) */ |
| bios_cntl = readb_(cntlr.bcr); |
| bios_cntl &= ~BCR_SMMBWP; |
| bios_cntl |= BCR_BIOSWE; |
| writeb_(bios_cntl, cntlr.bcr); |
| break; |
| } |
| |
| default: |
| break; |
| } |
| } |
| |
| typedef struct spi_transaction { |
| const uint8_t *out; |
| uint32_t bytesout; |
| uint8_t *in; |
| uint32_t bytesin; |
| uint8_t type; |
| uint8_t opcode; |
| uint32_t offset; |
| } spi_transaction; |
| |
| static inline void spi_use_out(spi_transaction *trans, unsigned bytes) |
| { |
| trans->out += bytes; |
| trans->bytesout -= bytes; |
| } |
| |
| static inline void spi_use_in(spi_transaction *trans, unsigned bytes) |
| { |
| trans->in += bytes; |
| trans->bytesin -= bytes; |
| } |
| |
| static void spi_setup_type(spi_transaction *trans) |
| { |
| trans->type = 0xFF; |
| |
| /* Try to guess spi type from read/write sizes. */ |
| if (trans->bytesin == 0) { |
| if (trans->bytesout > 4) |
| /* |
| * If bytesin = 0 and bytesout > 4, we presume this is |
| * a write data operation, which is accompanied by an |
| * address. |
| */ |
| trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; |
| else |
| trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; |
| return; |
| } |
| |
| if (trans->bytesout == 1) { /* and bytesin is > 0 */ |
| trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; |
| return; |
| } |
| |
| if (trans->bytesout == 4) { /* and bytesin is > 0 */ |
| trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; |
| } |
| |
| /* Fast read command is called with 5 bytes instead of 4 */ |
| if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) { |
| trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; |
| --trans->bytesout; |
| } |
| } |
| |
| static int spi_setup_opcode(spi_transaction *trans) |
| { |
| uint16_t optypes; |
| uint8_t opmenu[cntlr.menubytes]; |
| |
| trans->opcode = trans->out[0]; |
| spi_use_out(trans, 1); |
| if (!ichspi_lock) { |
| /* The lock is off, so just use index 0. */ |
| writeb_(trans->opcode, cntlr.opmenu); |
| optypes = readw_(cntlr.optype); |
| optypes = (optypes & 0xfffc) | (trans->type & 0x3); |
| writew_(optypes, cntlr.optype); |
| return 0; |
| } else { |
| /* The lock is on. See if what we need is on the menu. */ |
| uint8_t optype; |
| uint16_t opcode_index; |
| |
| /* Write Enable is handled as atomic prefix */ |
| if (trans->opcode == SPI_OPCODE_WREN) |
| return 0; |
| |
| read_reg(cntlr.opmenu, opmenu, sizeof(opmenu)); |
| for (opcode_index = 0; opcode_index < cntlr.menubytes; |
| opcode_index++) { |
| if (opmenu[opcode_index] == trans->opcode) |
| break; |
| } |
| |
| if (opcode_index == cntlr.menubytes) { |
| printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n", |
| trans->opcode); |
| return -1; |
| } |
| |
| optypes = readw_(cntlr.optype); |
| optype = (optypes >> (opcode_index * 2)) & 0x3; |
| if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && |
| optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && |
| trans->bytesout >= 3) { |
| /* We guessed wrong earlier. Fix it up. */ |
| trans->type = optype; |
| } |
| if (optype != trans->type) { |
| printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n", |
| optype); |
| return -1; |
| } |
| return opcode_index; |
| } |
| } |
| |
| static int spi_setup_offset(spi_transaction *trans) |
| { |
| /* Separate the SPI address and data. */ |
| switch (trans->type) { |
| case SPI_OPCODE_TYPE_READ_NO_ADDRESS: |
| case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: |
| return 0; |
| case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: |
| case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: |
| trans->offset = ((uint32_t)trans->out[0] << 16) | |
| ((uint32_t)trans->out[1] << 8) | |
| ((uint32_t)trans->out[2] << 0); |
| spi_use_out(trans, 3); |
| return 1; |
| default: |
| printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type); |
| return -1; |
| } |
| } |
| |
| /* |
| * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set |
| * below is True) or 0. In case the wait was for the bit(s) to set - write |
| * those bits back, which would cause resetting them. |
| * |
| * Return the last read status value on success or -1 on failure. |
| */ |
| static int ich_status_poll(u16 bitmask, int wait_til_set) |
| { |
| int timeout = 60000; /* This will result in 600 ms */ |
| u16 status = 0; |
| |
| while (timeout--) { |
| status = readw_(cntlr.status); |
| if (wait_til_set ^ ((status & bitmask) == 0)) { |
| if (wait_til_set) |
| writew_((status & bitmask), cntlr.status); |
| return status; |
| } |
| udelay(10); |
| } |
| |
| printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n", |
| status, bitmask); |
| return -1; |
| } |
| |
| static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout, |
| size_t bytesout, void *din, size_t bytesin) |
| { |
| uint16_t control; |
| int16_t opcode_index; |
| int with_address; |
| int status; |
| |
| spi_transaction trans = { |
| dout, bytesout, |
| din, bytesin, |
| 0xff, 0xff, 0 |
| }; |
| |
| /* There has to always at least be an opcode. */ |
| if (!bytesout || !dout) { |
| printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n"); |
| return -1; |
| } |
| /* Make sure if we read something we have a place to put it. */ |
| if (bytesin != 0 && !din) { |
| printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n"); |
| return -1; |
| } |
| |
| if (ich_status_poll(SPIS_SCIP, 0) == -1) |
| return -1; |
| |
| writew_(SPIS_CDS | SPIS_FCERR, cntlr.status); |
| |
| spi_setup_type(&trans); |
| if ((opcode_index = spi_setup_opcode(&trans)) < 0) |
| return -1; |
| if ((with_address = spi_setup_offset(&trans)) < 0) |
| return -1; |
| |
| if (!ichspi_lock && trans.opcode == SPI_OPCODE_WREN) { |
| /* |
| * Treat Write Enable as Atomic Pre-Op if possible |
| * in order to prevent the Management Engine from |
| * issuing a transaction between WREN and DATA. |
| */ |
| writew_(trans.opcode, cntlr.preop); |
| return 0; |
| } |
| |
| /* Preset control fields */ |
| control = SPIC_SCGO | ((opcode_index & 0x07) << 4); |
| |
| /* Issue atomic preop cycle if needed */ |
| if (readw_(cntlr.preop)) |
| control |= SPIC_ACS; |
| |
| if (!trans.bytesout && !trans.bytesin) { |
| /* SPI addresses are 24 bit only */ |
| if (with_address) |
| writel_(trans.offset & 0x00FFFFFF, cntlr.addr); |
| |
| /* |
| * This is a 'no data' command (like Write Enable), its |
| * bitesout size was 1, decremented to zero while executing |
| * spi_setup_opcode() above. Tell the chip to send the |
| * command. |
| */ |
| writew_(control, cntlr.control); |
| |
| /* wait for the result */ |
| status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); |
| if (status == -1) |
| return -1; |
| |
| if (status & SPIS_FCERR) { |
| printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n"); |
| return -1; |
| } |
| |
| goto spi_xfer_exit; |
| } |
| |
| /* |
| * Check if this is a write command attempting to transfer more bytes |
| * than the controller can handle. Iterations for writes are not |
| * supported here because each SPI write command needs to be preceded |
| * and followed by other SPI commands, and this sequence is controlled |
| * by the SPI chip driver. |
| */ |
| if (trans.bytesout > cntlr.databytes) { |
| printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use" |
| " spi_crop_chunk()?\n"); |
| return -1; |
| } |
| |
| /* |
| * Read or write up to databytes bytes at a time until everything has |
| * been sent. |
| */ |
| while (trans.bytesout || trans.bytesin) { |
| uint32_t data_length; |
| |
| /* SPI addresses are 24 bit only */ |
| writel_(trans.offset & 0x00FFFFFF, cntlr.addr); |
| |
| if (trans.bytesout) |
| data_length = min(trans.bytesout, cntlr.databytes); |
| else |
| data_length = min(trans.bytesin, cntlr.databytes); |
| |
| /* Program data into FDATA0 to N */ |
| if (trans.bytesout) { |
| write_reg(trans.out, cntlr.data, data_length); |
| spi_use_out(&trans, data_length); |
| if (with_address) |
| trans.offset += data_length; |
| } |
| |
| /* Add proper control fields' values */ |
| control &= ~((cntlr.databytes - 1) << 8); |
| control |= SPIC_DS; |
| control |= (data_length - 1) << 8; |
| |
| /* write it */ |
| writew_(control, cntlr.control); |
| |
| /* Wait for Cycle Done Status or Flash Cycle Error. */ |
| status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); |
| if (status == -1) |
| return -1; |
| |
| if (status & SPIS_FCERR) { |
| printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n"); |
| return -1; |
| } |
| |
| if (trans.bytesin) { |
| read_reg(cntlr.data, trans.in, data_length); |
| spi_use_in(&trans, data_length); |
| if (with_address) |
| trans.offset += data_length; |
| } |
| } |
| |
| spi_xfer_exit: |
| /* Clear atomic preop now that xfer is done */ |
| writew_(0, cntlr.preop); |
| |
| return 0; |
| } |
| |
| static const struct spi_ctrlr spi_ctrlr = { |
| .xfer = spi_ctrlr_xfer, |
| .xfer_vector = spi_xfer_two_vectors, |
| .max_xfer_size = member_size(ich10_spi_regs, fdata), |
| }; |
| |
| const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = { |
| { |
| .ctrlr = &spi_ctrlr, |
| .bus_start = 0, |
| .bus_end = 0, |
| }, |
| }; |
| |
| const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map); |