| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 Google Inc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA |
| */ |
| |
| #define __SIMPLE_DEVICE__ |
| |
| #include <arch/io.h> |
| #include <device/pci.h> |
| #include <device/pci_def.h> |
| #include <delay.h> |
| |
| #ifdef __PRE_RAM__ |
| |
| unsigned pci_find_next_capability(device_t dev, unsigned cap, unsigned last) |
| { |
| unsigned pos = 0; |
| u16 status; |
| unsigned reps = 48; |
| |
| status = pci_read_config16(dev, PCI_STATUS); |
| if (!(status & PCI_STATUS_CAP_LIST)) |
| return 0; |
| |
| u8 hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE); |
| switch (hdr_type & 0x7f) { |
| case PCI_HEADER_TYPE_NORMAL: |
| case PCI_HEADER_TYPE_BRIDGE: |
| pos = PCI_CAPABILITY_LIST; |
| break; |
| case PCI_HEADER_TYPE_CARDBUS: |
| pos = PCI_CB_CAPABILITY_LIST; |
| break; |
| default: |
| return 0; |
| } |
| |
| pos = pci_read_config8(dev, pos); |
| while (reps-- && (pos >= 0x40)) { /* Loop through the linked list. */ |
| int this_cap; |
| |
| pos &= ~3; |
| this_cap = pci_read_config8(dev, pos + PCI_CAP_LIST_ID); |
| if (this_cap == 0xff) |
| break; |
| |
| if (!last && (this_cap == cap)) |
| return pos; |
| |
| if (last == pos) |
| last = 0; |
| |
| pos = pci_read_config8(dev, pos + PCI_CAP_LIST_NEXT); |
| } |
| return 0; |
| } |
| |
| unsigned pci_find_capability(device_t dev, unsigned cap) |
| { |
| return pci_find_next_capability(dev, cap, 0); |
| } |
| #endif |
| |
| |
| #if CONFIG_EARLY_PCI_BRIDGE |
| |
| static void pci_bridge_reset_secondary(device_t p2p_bridge) |
| { |
| u16 reg16; |
| |
| /* First we reset the secondary bus. */ |
| reg16 = pci_read_config16(p2p_bridge, PCI_BRIDGE_CONTROL); |
| reg16 |= (1 << 6); /* SRESET */ |
| pci_write_config16(p2p_bridge, PCI_BRIDGE_CONTROL, reg16); |
| |
| /* Assume we don't have to wait here forever */ |
| |
| /* Read back and clear reset bit. */ |
| reg16 = pci_read_config16(p2p_bridge, PCI_BRIDGE_CONTROL); |
| reg16 &= ~(1 << 6); /* SRESET */ |
| pci_write_config16(p2p_bridge, PCI_BRIDGE_CONTROL, reg16); |
| } |
| |
| static void pci_bridge_set_secondary(device_t p2p_bridge, u8 secondary) |
| { |
| /* Disable config transaction forwarding. */ |
| pci_write_config8(p2p_bridge, PCI_SECONDARY_BUS, 0x00); |
| pci_write_config8(p2p_bridge, PCI_SUBORDINATE_BUS, 0x00); |
| /* Enable config transaction forwarding. */ |
| pci_write_config8(p2p_bridge, PCI_SECONDARY_BUS, secondary); |
| pci_write_config8(p2p_bridge, PCI_SUBORDINATE_BUS, secondary); |
| } |
| |
| static void pci_bridge_set_mmio(device_t p2p_bridge, u32 base, u32 size) |
| { |
| u16 reg16; |
| |
| /* Disable MMIO window behind the bridge. */ |
| reg16 = pci_read_config16(p2p_bridge, PCI_COMMAND); |
| reg16 &= ~PCI_COMMAND_MEMORY; |
| pci_write_config16(p2p_bridge, PCI_COMMAND, reg16); |
| pci_write_config32(p2p_bridge, PCI_MEMORY_BASE, 0x10); |
| |
| if (!size) |
| return; |
| |
| /* Enable MMIO window behind the bridge. */ |
| pci_write_config32(p2p_bridge, PCI_MEMORY_BASE, |
| ((base + size - 1) & 0xfff00000) | ((base >> 16) & 0xfff0)); |
| |
| reg16 = pci_read_config16(p2p_bridge, PCI_COMMAND); |
| reg16 |= PCI_COMMAND_MEMORY; |
| pci_write_config16(p2p_bridge, PCI_COMMAND, reg16); |
| } |
| |
| void pci_early_bridge_init(void) |
| { |
| int timeout, ret = -1; |
| |
| /* No PCI-to-PCI bridges are enabled yet, so the one we try to |
| * configure must have its primary on bus 0. |
| */ |
| pci_devfn_t p2p_bridge = PCI_DEV(0, CONFIG_EARLY_PCI_BRIDGE_DEVICE, |
| CONFIG_EARLY_PCI_BRIDGE_FUNCTION); |
| |
| /* Secondary bus number is mostly irrelevant as we disable |
| * configuration transactions right after the probe. |
| */ |
| u8 secondary = 15; |
| u8 dev = 0; |
| u32 mmio_base = CONFIG_EARLY_PCI_MMIO_BASE; |
| |
| /* Enable configuration and MMIO over bridge. */ |
| pci_bridge_reset_secondary(p2p_bridge); |
| pci_bridge_set_secondary(p2p_bridge, secondary); |
| pci_bridge_set_mmio(p2p_bridge, mmio_base, 0x4000); |
| |
| for (timeout = 20000; timeout; timeout--) { |
| u32 id = pci_read_config32(PCI_DEV(secondary, dev, 0), PCI_VENDOR_ID); |
| if (id != 0 && id != 0xffffffff && id != 0xffff0001) |
| break; |
| udelay(10); |
| } |
| |
| if (timeout != 0) |
| ret = pci_early_device_probe(secondary, dev, mmio_base); |
| |
| /* Disable MMIO window if we found no suitable device. */ |
| if (ret) |
| pci_bridge_set_mmio(p2p_bridge, 0, 0); |
| |
| /* Resource allocator will reconfigure bridges and secondary bus |
| * number may change. Thus early device cannot reliably use config |
| * transactions from here on, so we may as well disable them. |
| */ |
| pci_bridge_set_secondary(p2p_bridge, 0); |
| } |
| #endif /* CONFIG_EARLY_PCI_BRIDGE */ |