soc/intel/alderlake/ramstage: Do initial SoC commit till ramstage
List of changes:
1. Add required SoC programming till ramstage
2. Include only required headers into include/soc
3. Add CPU, PCH and SA EDS document number and chapter number
4. Fill required FSP-S UPD to call FSP-S API
Change-Id: I3394f585d66b14ece67cde9e45ffa1177406f35f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
index 8f12350..1e05897 100644
--- a/src/soc/intel/alderlake/Kconfig
+++ b/src/soc/intel/alderlake/Kconfig
@@ -8,25 +8,44 @@
config CPU_SPECIFIC_OPTIONS
def_bool y
select ACPI_INTEL_HARDWARE_SLEEP_VALUES
- select ARCH_BOOTBLOCK_X86_32
- select ARCH_ROMSTAGE_X86_32
- select ARCH_VERSTAGE_X86_32
+ select ARCH_ALL_STAGES_X86_32
select BOOT_DEVICE_SUPPORTS_WRITES
select CACHE_MRC_SETTINGS
select CPU_INTEL_COMMON
+ select CPU_INTEL_COMMON_HYPERTHREADING
+ select CPU_INTEL_FIRMWARE_INTERFACE_TABLE
+ select FSP_COMPRESS_FSP_S_LZ4
select FSP_M_XIP
+ select GENERIC_GPIO_LIB
+ select HAVE_FSP_GOP
select INTEL_DESCRIPTOR_MODE_CAPABLE
+ select HAVE_SMI_HANDLER
select IDT_IN_EVERY_STAGE
select INTEL_CAR_NEM #TODO - Enable INTEL_CAR_NEM_ENHANCED
+ select INTEL_GMA_ACPI
+ select INTEL_GMA_ADD_VBT if RUN_FSP_GOP
+ select IOAPIC
select MRC_SETTINGS_PROTECT
+ select PARALLEL_MP
+ select PARALLEL_MP_AP_WORK
select MICROCODE_BLOB_UNDISCLOSED
select PLATFORM_USES_FSP2_2
+ select FSP_PEIM_TO_PEIM_INTERFACE
+ select REG_SCRIPT
+ select PMC_GLOBAL_RESET_ENABLE_LOCK
+ select PMC_LOW_POWER_MODE_PROGRAM
select SOC_INTEL_COMMON
select SOC_INTEL_COMMON_BLOCK
select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG
select SOC_INTEL_COMMON_BLOCK_CPU
+ select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT
+ select SOC_INTEL_COMMON_BLOCK_DTT
+ select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT
select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2
+ select SOC_INTEL_COMMON_BLOCK_HDA
select SOC_INTEL_COMMON_BLOCK_SA
+ select SOC_INTEL_COMMON_BLOCK_SMM
+ select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP
select SOC_INTEL_COMMON_PCH_BASE
select SOC_INTEL_COMMON_RESET
select SOC_INTEL_COMMON_BLOCK_CAR
@@ -35,6 +54,12 @@
select TSC_MONOTONIC_TIMER
select UDELAY_TSC
select UDK_202005_BINDING
+ select DISPLAY_FSP_VERSION_INFO
+ select HECI_DISABLE_USING_SMM
+
+config MAX_CPUS
+ int
+ default 24
config DCACHE_RAM_BASE
default 0xfef00000
@@ -74,6 +99,22 @@
hex
default 0x10000
+config MAX_ROOT_PORTS
+ int
+ default 12
+
+config MAX_PCIE_CLOCKS
+ int
+ default 12
+
+config SMM_TSEG_SIZE
+ hex
+ default 0x800000
+
+config SMM_RESERVED_SIZE
+ hex
+ default 0x200000
+
config PCR_BASE_ADDRESS
hex
default 0xfd000000
@@ -145,6 +186,7 @@
config PRERAM_CBMEM_CONSOLE_SIZE
hex
default 0x1400
+
config FSP_HEADER_PATH
string "Location of FSP headers"
default "src/vendorcode/intel/fsp/fsp2_0/alderlake/"
diff --git a/src/soc/intel/alderlake/Makefile.inc b/src/soc/intel/alderlake/Makefile.inc
index 7ea9301..d962b75 100644
--- a/src/soc/intel/alderlake/Makefile.inc
+++ b/src/soc/intel/alderlake/Makefile.inc
@@ -7,6 +7,13 @@
subdirs-y += ../../../cpu/x86/smm
subdirs-y += ../../../cpu/x86/tsc
+# all (bootblock, verstage, romstage, postcar, ramstage)
+all-y += gspi.c
+all-y += i2c.c
+all-y += pmutil.c
+all-y += spi.c
+all-y += uart.c
+
bootblock-y += bootblock/bootblock.c
bootblock-y += bootblock/cpu.c
bootblock-y += bootblock/pch.c
@@ -20,9 +27,28 @@
romstage-y += meminit.c
romstage-y += reset.c
+ramstage-y += acpi.c
+ramstage-y += chip.c
+ramstage-y += cpu.c
+ramstage-y += elog.c
+ramstage-y += espi.c
+ramstage-y += finalize.c
+ramstage-y += fsp_params.c
ramstage-y += gpio.c
+ramstage-y += lockdown.c
+ramstage-y += me.c
+ramstage-y += p2sb.c
+ramstage-y += pmc.c
+ramstage-y += reset.c
+ramstage-y += smmrelocate.c
+ramstage-y += soundwire.c
+ramstage-y += systemagent.c
smm-y += gpio.c
+smm-y += p2sb.c
+smm-y += pmutil.c
+smm-y += smihandler.c
+smm-y += uart.c
CPPFLAGS_common += -I$(src)/soc/intel/alderlake
CPPFLAGS_common += -I$(src)/soc/intel/alderlake/include
diff --git a/src/soc/intel/alderlake/acpi.c b/src/soc/intel/alderlake/acpi.c
new file mode 100644
index 0000000..ca5d726
--- /dev/null
+++ b/src/soc/intel/alderlake/acpi.c
@@ -0,0 +1,375 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpi.h>
+#include <acpi/acpi_gnvs.h>
+#include <acpi/acpigen.h>
+#include <device/mmio.h>
+#include <arch/smp/mpspec.h>
+#include <cbmem.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci_ops.h>
+#include <ec/google/chromeec/ec.h>
+#include <intelblocks/cpulib.h>
+#include <intelblocks/pmclib.h>
+#include <intelblocks/acpi.h>
+#include <soc/cpu.h>
+#include <soc/iomap.h>
+#include <soc/nvs.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/soc_chip.h>
+#include <soc/systemagent.h>
+#include <string.h>
+#include <types.h>
+#include <wrdd.h>
+
+/*
+ * List of supported C-states in this processor.
+ */
+enum {
+ C_STATE_C0, /* 0 */
+ C_STATE_C1, /* 1 */
+ C_STATE_C1E, /* 2 */
+ C_STATE_C6_SHORT_LAT, /* 3 */
+ C_STATE_C6_LONG_LAT, /* 4 */
+ C_STATE_C7_SHORT_LAT, /* 5 */
+ C_STATE_C7_LONG_LAT, /* 6 */
+ C_STATE_C7S_SHORT_LAT, /* 7 */
+ C_STATE_C7S_LONG_LAT, /* 8 */
+ C_STATE_C8, /* 9 */
+ C_STATE_C9, /* 10 */
+ C_STATE_C10, /* 11 */
+ NUM_C_STATES
+};
+
+#define MWAIT_RES(state, sub_state) \
+ { \
+ .addrl = (((state) << 4) | (sub_state)), \
+ .space_id = ACPI_ADDRESS_SPACE_FIXED, \
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, \
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, \
+ .access_size = ACPI_FFIXEDHW_FLAG_HW_COORD, \
+ }
+
+static const acpi_cstate_t cstate_map[NUM_C_STATES] = {
+ [C_STATE_C0] = {},
+ [C_STATE_C1] = {
+ .latency = C1_LATENCY,
+ .power = C1_POWER,
+ .resource = MWAIT_RES(0, 0),
+ },
+ [C_STATE_C1E] = {
+ .latency = C1_LATENCY,
+ .power = C1_POWER,
+ .resource = MWAIT_RES(0, 1),
+ },
+ [C_STATE_C6_SHORT_LAT] = {
+ .latency = C6_LATENCY,
+ .power = C6_POWER,
+ .resource = MWAIT_RES(2, 0),
+ },
+ [C_STATE_C6_LONG_LAT] = {
+ .latency = C6_LATENCY,
+ .power = C6_POWER,
+ .resource = MWAIT_RES(2, 1),
+ },
+ [C_STATE_C7_SHORT_LAT] = {
+ .latency = C7_LATENCY,
+ .power = C7_POWER,
+ .resource = MWAIT_RES(3, 0),
+ },
+ [C_STATE_C7_LONG_LAT] = {
+ .latency = C7_LATENCY,
+ .power = C7_POWER,
+ .resource = MWAIT_RES(3, 1),
+ },
+ [C_STATE_C7S_SHORT_LAT] = {
+ .latency = C7_LATENCY,
+ .power = C7_POWER,
+ .resource = MWAIT_RES(3, 2),
+ },
+ [C_STATE_C7S_LONG_LAT] = {
+ .latency = C7_LATENCY,
+ .power = C7_POWER,
+ .resource = MWAIT_RES(3, 3),
+ },
+ [C_STATE_C8] = {
+ .latency = C8_LATENCY,
+ .power = C8_POWER,
+ .resource = MWAIT_RES(4, 0),
+ },
+ [C_STATE_C9] = {
+ .latency = C9_LATENCY,
+ .power = C9_POWER,
+ .resource = MWAIT_RES(5, 0),
+ },
+ [C_STATE_C10] = {
+ .latency = C10_LATENCY,
+ .power = C10_POWER,
+ .resource = MWAIT_RES(6, 0),
+ },
+};
+
+static int cstate_set_non_s0ix[] = {
+ C_STATE_C1,
+ C_STATE_C6_LONG_LAT,
+ C_STATE_C7S_LONG_LAT
+};
+
+static int cstate_set_s0ix[] = {
+ C_STATE_C1,
+ C_STATE_C7S_LONG_LAT,
+ C_STATE_C10
+};
+
+acpi_cstate_t *soc_get_cstate_map(size_t *entries)
+{
+ static acpi_cstate_t map[MAX(ARRAY_SIZE(cstate_set_s0ix),
+ ARRAY_SIZE(cstate_set_non_s0ix))];
+ int *set;
+ int i;
+
+ config_t *config = config_of_soc();
+
+ int is_s0ix_enable = config->s0ix_enable;
+
+ if (is_s0ix_enable) {
+ *entries = ARRAY_SIZE(cstate_set_s0ix);
+ set = cstate_set_s0ix;
+ } else {
+ *entries = ARRAY_SIZE(cstate_set_non_s0ix);
+ set = cstate_set_non_s0ix;
+ }
+
+ for (i = 0; i < *entries; i++) {
+ memcpy(&map[i], &cstate_map[set[i]], sizeof(acpi_cstate_t));
+ map[i].ctype = i + 1;
+ }
+ return map;
+}
+
+void soc_power_states_generation(int core_id, int cores_per_package)
+{
+ config_t *config = config_of_soc();
+
+ if (config->eist_enable)
+ /* Generate P-state tables */
+ generate_p_state_entries(core_id, cores_per_package);
+}
+
+void soc_fill_fadt(acpi_fadt_t *fadt)
+{
+ const uint16_t pmbase = ACPI_BASE_ADDRESS;
+
+ config_t *config = config_of_soc();
+
+ fadt->pm_tmr_blk = pmbase + PM1_TMR;
+ fadt->pm_tmr_len = 4;
+ fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm_tmr_blk.bit_width = fadt->pm_tmr_len * 8;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+ fadt->x_pm_tmr_blk.addrl = pmbase + PM1_TMR;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ if (config->s0ix_enable)
+ fadt->flags |= ACPI_FADT_LOW_PWR_IDLE_S0;
+}
+
+uint32_t soc_read_sci_irq_select(void)
+{
+ return read32((void *)soc_read_pmc_base() + IRQ_REG);
+}
+
+static unsigned long soc_fill_dmar(unsigned long current)
+{
+ const struct device *const igfx_dev = pcidev_path_on_root(SA_DEVFN_IGD);
+ const uint64_t gfxvtbar = MCHBAR64(GFXVTBAR) & VTBAR_MASK;
+ const bool gfxvten = MCHBAR32(GFXVTBAR) & VTBAR_ENABLED;
+
+ if (is_dev_enabled(igfx_dev) && gfxvtbar && gfxvten) {
+ const unsigned long tmp = current;
+
+ current += acpi_create_dmar_drhd(current, 0, 0, gfxvtbar);
+ current += acpi_create_dmar_ds_pci(current, 0, 2, 0);
+
+ acpi_dmar_drhd_fixup(tmp, current);
+ }
+
+ const struct device *const ipu_dev = pcidev_path_on_root(SA_DEVFN_IPU);
+ const uint64_t ipuvtbar = MCHBAR64(IPUVTBAR) & VTBAR_MASK;
+ const bool ipuvten = MCHBAR32(IPUVTBAR) & VTBAR_ENABLED;
+
+ if (is_dev_enabled(ipu_dev) && ipuvtbar && ipuvten) {
+ const unsigned long tmp = current;
+
+ current += acpi_create_dmar_drhd(current, 0, 0, ipuvtbar);
+ current += acpi_create_dmar_ds_pci(current, 0, 5, 0);
+
+ acpi_dmar_drhd_fixup(tmp, current);
+ }
+
+ const uint64_t vtvc0bar = MCHBAR64(VTVC0BAR) & VTBAR_MASK;
+ const bool vtvc0en = MCHBAR32(VTVC0BAR) & VTBAR_ENABLED;
+
+ if (vtvc0bar && vtvc0en) {
+ const unsigned long tmp = current;
+
+ current += acpi_create_dmar_drhd(current,
+ DRHD_INCLUDE_PCI_ALL, 0, vtvc0bar);
+ current += acpi_create_dmar_ds_ioapic(current,
+ 2, V_P2SB_CFG_IBDF_BUS, V_P2SB_CFG_IBDF_DEV,
+ V_P2SB_CFG_IBDF_FUNC);
+ current += acpi_create_dmar_ds_msi_hpet(current,
+ 0, V_P2SB_CFG_HBDF_BUS, V_P2SB_CFG_HBDF_DEV,
+ V_P2SB_CFG_HBDF_FUNC);
+
+ acpi_dmar_drhd_fixup(tmp, current);
+ }
+
+ /* TCSS Thunderbolt root ports */
+ for (unsigned int i = 0; i < MAX_TBT_PCIE_PORT; i++) {
+ const struct device *const tbt_dev = pcidev_path_on_root(SA_DEVFN_TBT(i));
+ if (is_dev_enabled(tbt_dev)) {
+ const uint64_t tbtbar = MCHBAR64(TBTxBAR(i)) & VTBAR_MASK;
+ const bool tbten = MCHBAR32(TBTxBAR(i)) & VTBAR_ENABLED;
+ if (tbtbar && tbten) {
+ const unsigned long tmp = current;
+
+ current += acpi_create_dmar_drhd(current, 0, 0, tbtbar);
+ current += acpi_create_dmar_ds_pci_br(current, 0, 7, i);
+
+ acpi_dmar_drhd_fixup(tmp, current);
+ }
+ }
+ }
+
+ /* Add RMRR entry */
+ if (is_dev_enabled(igfx_dev)) {
+ const unsigned long tmp = current;
+ current += acpi_create_dmar_rmrr(current, 0,
+ sa_get_gsm_base(), sa_get_tolud_base() - 1);
+ current += acpi_create_dmar_ds_pci(current, 0, 2, 0);
+ acpi_dmar_rmrr_fixup(tmp, current);
+ }
+
+ return current;
+}
+
+unsigned long sa_write_acpi_tables(const struct device *dev, unsigned long current,
+ struct acpi_rsdp *rsdp)
+{
+ acpi_dmar_t *const dmar = (acpi_dmar_t *)current;
+
+ /*
+ * Create DMAR table only if we have VT-d capability and FSP does not override its
+ * feature.
+ */
+ if ((pci_read_config32(dev, CAPID0_A) & VTD_DISABLE) ||
+ !(MCHBAR32(VTVC0BAR) & VTBAR_ENABLED))
+ return current;
+
+ printk(BIOS_DEBUG, "ACPI: * DMAR\n");
+ acpi_create_dmar(dmar, DMAR_INTR_REMAP | DMA_CTRL_PLATFORM_OPT_IN_FLAG, soc_fill_dmar);
+ current += dmar->header.length;
+ current = acpi_align_current(current);
+ acpi_add_table(rsdp, dmar);
+
+ return current;
+}
+
+void acpi_create_gnvs(struct global_nvs *gnvs)
+{
+ config_t *config = config_of_soc();
+
+ /* Set unknown wake source */
+ gnvs->pm1i = -1;
+
+ /* CPU core count */
+ gnvs->pcnt = dev_count_cpu();
+
+ if (CONFIG(CONSOLE_CBMEM))
+ /* Update the mem console pointer. */
+ gnvs->cbmc = (uintptr_t)cbmem_find(CBMEM_ID_CONSOLE);
+
+ if (CONFIG(CHROMEOS)) {
+ /* Initialize Verified Boot data */
+ chromeos_init_chromeos_acpi(&(gnvs->chromeos));
+ if (CONFIG(EC_GOOGLE_CHROMEEC)) {
+ gnvs->chromeos.vbt2 = google_ec_running_ro() ?
+ ACTIVE_ECFW_RO : ACTIVE_ECFW_RW;
+ } else
+ gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO;
+ }
+
+ /* Enable DPTF based on mainboard configuration */
+ gnvs->dpte = config->dptf_enable;
+
+ /* Fill in the Wifi Region id */
+ gnvs->cid1 = wifi_regulatory_domain();
+
+ /* Set USB2/USB3 wake enable bitmaps. */
+ gnvs->u2we = config->usb2_wake_enable_bitmap;
+ gnvs->u3we = config->usb3_wake_enable_bitmap;
+
+ /* Fill in Above 4GB MMIO resource */
+ sa_fill_gnvs(gnvs);
+}
+
+uint32_t acpi_fill_soc_wake(uint32_t generic_pm1_en,
+ const struct chipset_power_state *ps)
+{
+ /*
+ * WAK_STS bit is set when the system is in one of the sleep states
+ * (via the SLP_EN bit) and an enabled wake event occurs. Upon setting
+ * this bit, the PMC will transition the system to the ON state and
+ * can only be set by hardware and can only be cleared by writing a one
+ * to this bit position.
+ */
+
+ generic_pm1_en |= WAK_STS | RTC_EN | PWRBTN_EN;
+ return generic_pm1_en;
+}
+
+int soc_madt_sci_irq_polarity(int sci)
+{
+ return MP_IRQ_POLARITY_HIGH;
+}
+
+static int acpigen_soc_gpio_op(const char *op, unsigned int gpio_num)
+{
+ /* op (gpio_num) */
+ acpigen_emit_namestring(op);
+ acpigen_write_integer(gpio_num);
+ return 0;
+}
+
+static int acpigen_soc_get_gpio_state(const char *op, unsigned int gpio_num)
+{
+ /* Store (op (gpio_num), Local0) */
+ acpigen_write_store();
+ acpigen_soc_gpio_op(op, gpio_num);
+ acpigen_emit_byte(LOCAL0_OP);
+ return 0;
+}
+
+int acpigen_soc_read_rx_gpio(unsigned int gpio_num)
+{
+ return acpigen_soc_get_gpio_state("\\_SB.PCI0.GRXS", gpio_num);
+}
+
+int acpigen_soc_get_tx_gpio(unsigned int gpio_num)
+{
+ return acpigen_soc_get_gpio_state("\\_SB.PCI0.GTXS", gpio_num);
+}
+
+int acpigen_soc_set_tx_gpio(unsigned int gpio_num)
+{
+ return acpigen_soc_gpio_op("\\_SB.PCI0.STXS", gpio_num);
+}
+
+int acpigen_soc_clear_tx_gpio(unsigned int gpio_num)
+{
+ return acpigen_soc_gpio_op("\\_SB.PCI0.CTXS", gpio_num);
+}
diff --git a/src/soc/intel/alderlake/chip.c b/src/soc/intel/alderlake/chip.c
new file mode 100644
index 0000000..794c3ba
--- /dev/null
+++ b/src/soc/intel/alderlake/chip.c
@@ -0,0 +1,191 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <fsp/api.h>
+#include <fsp/util.h>
+#include <intelblocks/acpi.h>
+#include <intelblocks/cfg.h>
+#include <intelblocks/itss.h>
+#include <intelblocks/pcie_rp.h>
+#include <intelblocks/xdci.h>
+#include <romstage_handoff.h>
+#include <soc/intel/common/vbt.h>
+#include <soc/itss.h>
+#include <soc/pci_devs.h>
+#include <soc/ramstage.h>
+#include <soc/soc_chip.h>
+
+static const struct pcie_rp_group pch_lp_rp_groups[] = {
+ { .slot = PCH_DEV_SLOT_PCIE, .count = 8 },
+ { .slot = PCH_DEV_SLOT_PCIE_1, .count = 4 },
+ { 0 }
+};
+
+#if CONFIG(HAVE_ACPI_TABLES)
+const char *soc_acpi_name(const struct device *dev)
+{
+ if (dev->path.type == DEVICE_PATH_DOMAIN)
+ return "PCI0";
+
+ if (dev->path.type == DEVICE_PATH_USB) {
+ switch (dev->path.usb.port_type) {
+ case 0:
+ /* Root Hub */
+ return "RHUB";
+ case 2:
+ /* USB2 ports */
+ switch (dev->path.usb.port_id) {
+ case 0: return "HS01";
+ case 1: return "HS02";
+ case 2: return "HS03";
+ case 3: return "HS04";
+ case 4: return "HS05";
+ case 5: return "HS06";
+ case 6: return "HS07";
+ case 7: return "HS08";
+ case 8: return "HS09";
+ case 9: return "HS10";
+ }
+ break;
+ case 3:
+ /* USB3 ports */
+ switch (dev->path.usb.port_id) {
+ case 0: return "SS01";
+ case 1: return "SS02";
+ case 2: return "SS03";
+ case 3: return "SS04";
+ }
+ break;
+ }
+ return NULL;
+ }
+ if (dev->path.type != DEVICE_PATH_PCI)
+ return NULL;
+
+ switch (dev->path.pci.devfn) {
+ case SA_DEVFN_ROOT: return "MCHC";
+ case SA_DEVFN_TCSS_XHCI: return "TXHC";
+ case SA_DEVFN_TCSS_XDCI: return "TXDC";
+ case SA_DEVFN_TCSS_DMA0: return "TDM0";
+ case SA_DEVFN_TCSS_DMA1: return "TDM1";
+ case SA_DEVFN_TBT0: return "TRP0";
+ case SA_DEVFN_TBT1: return "TRP1";
+ case SA_DEVFN_TBT2: return "TRP2";
+ case SA_DEVFN_TBT3: return "TRP3";
+ case SA_DEVFN_IPU: return "IPU0";
+ case PCH_DEVFN_ISH: return "ISHB";
+ case PCH_DEVFN_XHCI: return "XHCI";
+ case PCH_DEVFN_I2C0: return "I2C0";
+ case PCH_DEVFN_I2C1: return "I2C1";
+ case PCH_DEVFN_I2C2: return "I2C2";
+ case PCH_DEVFN_I2C3: return "I2C3";
+ case PCH_DEVFN_I2C4: return "I2C4";
+ case PCH_DEVFN_I2C5: return "I2C5";
+ case PCH_DEVFN_SATA: return "SATA";
+ case PCH_DEVFN_PCIE1: return "RP01";
+ case PCH_DEVFN_PCIE2: return "RP02";
+ case PCH_DEVFN_PCIE3: return "RP03";
+ case PCH_DEVFN_PCIE4: return "RP04";
+ case PCH_DEVFN_PCIE5: return "RP05";
+ case PCH_DEVFN_PCIE6: return "RP06";
+ case PCH_DEVFN_PCIE7: return "RP07";
+ case PCH_DEVFN_PCIE8: return "RP08";
+ case PCH_DEVFN_PCIE9: return "RP09";
+ case PCH_DEVFN_PCIE10: return "RP10";
+ case PCH_DEVFN_PCIE11: return "RP11";
+ case PCH_DEVFN_PCIE12: return "RP12";
+ case PCH_DEVFN_PMC: return "PMC";
+ case PCH_DEVFN_UART0: return "UAR0";
+ case PCH_DEVFN_UART1: return "UAR1";
+ case PCH_DEVFN_UART2: return "UAR2";
+ case PCH_DEVFN_GSPI0: return "SPI0";
+ case PCH_DEVFN_GSPI1: return "SPI1";
+ case PCH_DEVFN_GSPI2: return "SPI2";
+ case PCH_DEVFN_GSPI3: return "SPI3";
+ /* Keeping ACPI device name coherent with ec.asl */
+ case PCH_DEVFN_ESPI: return "LPCB";
+ case PCH_DEVFN_HDA: return "HDAS";
+ case PCH_DEVFN_SMBUS: return "SBUS";
+ case PCH_DEVFN_GBE: return "GLAN";
+ }
+
+ return NULL;
+}
+#endif
+
+/* SoC routine to fill GPIO PM mask and value for GPIO_MISCCFG register */
+static void soc_fill_gpio_pm_configuration(void)
+{
+ uint8_t value[TOTAL_GPIO_COMM];
+ const config_t *config = config_of_soc();
+
+ if (config->gpio_override_pm)
+ memcpy(value, config->gpio_pm, sizeof(uint8_t) *
+ TOTAL_GPIO_COMM);
+ else
+ memset(value, MISCCFG_ENABLE_GPIO_PM_CONFIG, sizeof(uint8_t) *
+ TOTAL_GPIO_COMM);
+
+ gpio_pm_configure(value, TOTAL_GPIO_COMM);
+}
+
+void soc_init_pre_device(void *chip_info)
+{
+ /* TODO: A bug has been filed, remove this W/A once FSP is updated */
+ /* Snapshot the current GPIO IRQ polarities. FSP is setting a
+ * default policy that doesn't honor boards' requirements. */
+ itss_snapshot_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END);
+
+ /* Perform silicon specific init. */
+ fsp_silicon_init(romstage_handoff_is_resume());
+
+ /* Display FIRMWARE_VERSION_INFO_HOB */
+ fsp_display_fvi_version_hob();
+
+ /* Restore GPIO IRQ polarities back to previous settings. */
+ itss_restore_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END);
+
+ soc_fill_gpio_pm_configuration();
+
+ /* Swap enabled PCI ports in device tree if needed. */
+ pcie_rp_update_devicetree(pch_lp_rp_groups);
+}
+
+static struct device_operations pci_domain_ops = {
+ .read_resources = &pci_domain_read_resources,
+ .set_resources = &pci_domain_set_resources,
+ .scan_bus = &pci_domain_scan_bus,
+#if CONFIG(HAVE_ACPI_TABLES)
+ .acpi_name = &soc_acpi_name,
+#endif
+};
+
+static struct device_operations cpu_bus_ops = {
+ .read_resources = noop_read_resources,
+ .set_resources = noop_set_resources,
+#if CONFIG(HAVE_ACPI_TABLES)
+ .acpi_fill_ssdt = generate_cpu_entries,
+#endif
+};
+
+static void soc_enable(struct device *dev)
+{
+ /*
+ * Set the operations if it is a special bus type or a hidden PCI
+ * device.
+ */
+ if (dev->path.type == DEVICE_PATH_DOMAIN)
+ dev->ops = &pci_domain_ops;
+ else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER)
+ dev->ops = &cpu_bus_ops;
+ else if (dev->path.type == DEVICE_PATH_PCI &&
+ dev->path.pci.devfn == PCH_DEVFN_PMC)
+ dev->ops = &pmc_ops;
+}
+
+struct chip_operations soc_intel_alderlake_ops = {
+ CHIP_NAME("Intel Alderlake")
+ .enable_dev = &soc_enable,
+ .init = &soc_init_pre_device,
+};
diff --git a/src/soc/intel/alderlake/chip.h b/src/soc/intel/alderlake/chip.h
index 2721da6..aaf03f5 100644
--- a/src/soc/intel/alderlake/chip.h
+++ b/src/soc/intel/alderlake/chip.h
@@ -11,6 +11,8 @@
#include <soc/pch.h>
#include <soc/pci_devs.h>
#include <soc/pmc.h>
+#include <soc/serialio.h>
+#include <soc/usb.h>
#include <stdint.h>
#define MAX_HD_AUDIO_DMIC_LINKS 2
@@ -177,7 +179,6 @@
uint8_t SkipExtGfxScan;
uint32_t GraphicsConfigPtr;
- uint8_t Device4Enable;
/* HeciEnabled decides the state of Heci1 at end of boot
* Setting to 0 (default) disables Heci1 and hides the device from OS */
@@ -239,10 +240,6 @@
/* Enable Pch iSCLK */
uint8_t pch_isclk;
- /* CNVi */
- uint8_t CnviMode;
- uint8_t CnviBtCore;
-
/* CNVi BT Audio Offload: Enable/Disable BT Audio Offload. */
enum {
FORCE_DISABLE,
@@ -250,6 +247,19 @@
} CnviBtAudioOffload;
/*
+ * IOM Port Config
+ * If a port orientation needs to be controlled by the SOC this setting must be
+ * updated to reflect the correct GPIOs being used for the SOC port flipping.
+ * There are 4 ports each with a pair of GPIOs for Pull Up and Pull Down
+ * 0,1 are pull up and pull down for port 0
+ * 2,3 are pull up and pull down for port 1
+ * 4,5 are pull up and pull down for port 2
+ * 6,7 are pull up and pull down for port 3
+ * values to be programmed correspond to the GPIO family and offsets
+ */
+ uint32_t IomTypeCPortPadCfg[8];
+
+ /*
* SOC Aux orientation override:
* This is a bitfield that corresponds to up to 4 TCSS ports on ADL.
* Even numbered bits (0, 2, 4, 6) control the retimer being handled by SOC.
diff --git a/src/soc/intel/alderlake/cpu.c b/src/soc/intel/alderlake/cpu.c
new file mode 100644
index 0000000..ee8051d
--- /dev/null
+++ b/src/soc/intel/alderlake/cpu.c
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * This file is created based on Intel Alder Lake Processor CPU Datasheet
+ * Document number: 619501
+ * Chapter number: 14
+ */
+
+#include <arch/cpu.h>
+#include <console/console.h>
+#include <device/pci.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/mp.h>
+#include <cpu/x86/msr.h>
+#include <cpu/intel/smm_reloc.h>
+#include <cpu/intel/turbo.h>
+#include <fsp/api.h>
+#include <intelblocks/cpulib.h>
+#include <intelblocks/mp_init.h>
+#include <intelblocks/msr.h>
+#include <romstage_handoff.h>
+#include <soc/cpu.h>
+#include <soc/msr.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/soc_chip.h>
+
+static void soc_fsp_load(void)
+{
+ fsps_load(romstage_handoff_is_resume());
+}
+
+static void configure_isst(void)
+{
+ config_t *conf = config_of_soc();
+ msr_t msr;
+
+ if (conf->speed_shift_enable) {
+ /*
+ * Kernel driver checks CPUID.06h:EAX[Bit 7] to determine if HWP
+ * is supported or not. coreboot needs to configure MSR 0x1AA
+ * which is then reflected in the CPUID register.
+ */
+ msr = rdmsr(MSR_MISC_PWR_MGMT);
+ msr.lo |= MISC_PWR_MGMT_ISST_EN; /* Enable Speed Shift */
+ msr.lo |= MISC_PWR_MGMT_ISST_EN_INT; /* Enable Interrupt */
+ msr.lo |= MISC_PWR_MGMT_ISST_EN_EPP; /* Enable EPP */
+ wrmsr(MSR_MISC_PWR_MGMT, msr);
+ } else {
+ msr = rdmsr(MSR_MISC_PWR_MGMT);
+ msr.lo &= ~MISC_PWR_MGMT_ISST_EN; /* Disable Speed Shift */
+ msr.lo &= ~MISC_PWR_MGMT_ISST_EN_INT; /* Disable Interrupt */
+ msr.lo &= ~MISC_PWR_MGMT_ISST_EN_EPP; /* Disable EPP */
+ wrmsr(MSR_MISC_PWR_MGMT, msr);
+ }
+}
+
+static void configure_misc(void)
+{
+ msr_t msr;
+
+ config_t *conf = config_of_soc();
+
+ msr = rdmsr(IA32_MISC_ENABLE);
+ msr.lo |= (1 << 0); /* Fast String enable */
+ msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
+ wrmsr(IA32_MISC_ENABLE, msr);
+
+ /* Set EIST status */
+ cpu_set_eist(conf->eist_enable);
+
+ /* Disable Thermal interrupts */
+ msr.lo = 0;
+ msr.hi = 0;
+ wrmsr(IA32_THERM_INTERRUPT, msr);
+
+ /* Enable package critical interrupt only */
+ msr.lo = 1 << 4;
+ msr.hi = 0;
+ wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
+
+ /* Enable PROCHOT */
+ msr = rdmsr(MSR_POWER_CTL);
+ msr.lo |= (1 << 0); /* Enable Bi-directional PROCHOT as an input*/
+ msr.lo |= (1 << 23); /* Lock it */
+ wrmsr(MSR_POWER_CTL, msr);
+}
+
+static void enable_lapic_tpr(void)
+{
+ msr_t msr;
+
+ msr = rdmsr(MSR_PIC_MSG_CONTROL);
+ msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */
+ wrmsr(MSR_PIC_MSG_CONTROL, msr);
+}
+
+static void configure_dca_cap(void)
+{
+ uint32_t feature_flag;
+ msr_t msr;
+
+ /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */
+ feature_flag = cpu_get_feature_flags_ecx();
+ if (feature_flag & CPUID_DCA) {
+ msr = rdmsr(IA32_PLATFORM_DCA_CAP);
+ msr.lo |= 1;
+ wrmsr(IA32_PLATFORM_DCA_CAP, msr);
+ }
+}
+
+static void enable_pm_timer_emulation(void)
+{
+ /* ACPI PM timer emulation */
+ msr_t msr;
+ /*
+ * The derived frequency is calculated as follows:
+ * (CTC_FREQ * msr[63:32]) >> 32 = target frequency.
+ * Back solve the multiplier so the 3.579545MHz ACPI timer
+ * frequency is used.
+ */
+ msr.hi = (3579545ULL << 32) / CTC_FREQ;
+ /* Set PM1 timer IO port and enable */
+ msr.lo = (EMULATE_DELAY_VALUE << EMULATE_DELAY_OFFSET_VALUE) |
+ EMULATE_PM_TMR_EN | (ACPI_BASE_ADDRESS + PM1_TMR);
+ wrmsr(MSR_EMULATE_PM_TIMER, msr);
+}
+
+static void set_energy_perf_bias(u8 policy)
+{
+ msr_t msr;
+ int ecx;
+
+ /* Determine if energy efficient policy is supported. */
+ ecx = cpuid_ecx(0x6);
+ if (!(ecx & (1 << 3)))
+ return;
+
+ /* Energy Policy is bits 3:0 */
+ msr = rdmsr(IA32_ENERGY_PERF_BIAS);
+ msr.lo &= ~0xf;
+ msr.lo |= policy & 0xf;
+ wrmsr(IA32_ENERGY_PERF_BIAS, msr);
+}
+
+/* All CPUs including BSP will run the following function. */
+void soc_core_init(struct device *cpu)
+{
+ /* Clear out pending MCEs */
+ /* TODO(adurbin): This should only be done on a cold boot. Also, some
+ * of these banks are core vs package scope. For now every CPU clears
+ * every bank. */
+ mca_configure();
+
+ /* Enable the local CPU apics */
+ enable_lapic_tpr();
+ setup_lapic();
+
+ /* Configure Enhanced SpeedStep and Thermal Sensors */
+ configure_misc();
+
+ /* Configure Intel Speed Shift */
+ configure_isst();
+
+ /* Enable PM timer emulation */
+ enable_pm_timer_emulation();
+
+ /* Enable Direct Cache Access */
+ configure_dca_cap();
+
+ /* Set energy policy */
+ set_energy_perf_bias(ENERGY_POLICY_NORMAL);
+
+ /* Enable Turbo */
+ enable_turbo();
+}
+
+static void per_cpu_smm_trigger(void)
+{
+ /* Relocate the SMM handler. */
+ smm_relocate();
+}
+
+static void post_mp_init(void)
+{
+ /* Set Max Ratio */
+ cpu_set_max_ratio();
+
+ /*
+ * Now that all APs have been relocated as well as the BSP let SMIs
+ * start flowing.
+ */
+ global_smi_enable();
+}
+
+static const struct mp_ops mp_ops = {
+ /*
+ * Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP,
+ * that are set prior to ramstage.
+ * Real MTRRs programming are being done after resource allocation.
+ */
+ .pre_mp_init = soc_fsp_load,
+ .get_cpu_count = get_cpu_count,
+ .get_smm_info = smm_info,
+ .get_microcode_info = get_microcode_info,
+ .pre_mp_smm_init = smm_initialize,
+ .per_cpu_smm_trigger = per_cpu_smm_trigger,
+ .relocation_handler = smm_relocation_handler,
+ .post_mp_init = post_mp_init,
+};
+
+void soc_init_cpus(struct bus *cpu_bus)
+{
+ if (mp_init_with_smm(cpu_bus, &mp_ops))
+ printk(BIOS_ERR, "MP initialization failure.\n");
+
+ /* Thermal throttle activation offset */
+ configure_tcc_thermal_target();
+}
diff --git a/src/soc/intel/alderlake/elog.c b/src/soc/intel/alderlake/elog.c
new file mode 100644
index 0000000..84f0a7e
--- /dev/null
+++ b/src/soc/intel/alderlake/elog.c
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <bootstate.h>
+#include <console/console.h>
+#include <stdint.h>
+#include <elog.h>
+#include <intelblocks/pmclib.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+
+static void pch_log_gpio_gpe(u32 gpe0_sts, u32 gpe0_en, int start)
+{
+ int i;
+
+ gpe0_sts &= gpe0_en;
+
+ for (i = 0; i <= 31; i++) {
+ if (gpe0_sts & (1 << i))
+ elog_add_event_wake(ELOG_WAKE_SOURCE_GPE, i + start);
+ }
+}
+
+static void pch_log_wake_source(struct chipset_power_state *ps)
+{
+ /* Power Button */
+ if (ps->pm1_sts & PWRBTN_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_PWRBTN, 0);
+
+ /* RTC */
+ if (ps->pm1_sts & RTC_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_RTC, 0);
+
+ /* PCI Express (TODO: determine wake device) */
+ if (ps->pm1_sts & PCIEXPWAK_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_PCIE, 0);
+
+ /* PME (TODO: determine wake device) */
+ if (ps->gpe0_sts[GPE_STD] & PME_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_PME, 0);
+
+ /* Internal PME (TODO: determine wake device) */
+ if (ps->gpe0_sts[GPE_STD] & PME_B0_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_PME_INTERNAL, 0);
+
+ /* SMBUS Wake */
+ if (ps->gpe0_sts[GPE_STD] & SMB_WAK_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_SMBUS, 0);
+
+ /* Log GPIO events in set 1-3 */
+ pch_log_gpio_gpe(ps->gpe0_sts[GPE_31_0], ps->gpe0_en[GPE_31_0], 0);
+ pch_log_gpio_gpe(ps->gpe0_sts[GPE_63_32], ps->gpe0_en[GPE_63_32], 32);
+ pch_log_gpio_gpe(ps->gpe0_sts[GPE_95_64], ps->gpe0_en[GPE_95_64], 64);
+ /* Treat the STD as an extension of GPIO to obtain visibility. */
+ pch_log_gpio_gpe(ps->gpe0_sts[GPE_STD], ps->gpe0_en[GPE_STD], 96);
+}
+
+static void pch_log_power_and_resets(struct chipset_power_state *ps)
+{
+ /* Thermal Trip */
+ if (ps->gblrst_cause[0] & GBLRST_CAUSE0_THERMTRIP)
+ elog_add_event(ELOG_TYPE_THERM_TRIP);
+
+ /* CSME-Initiated Host Reset with power down */
+ if (ps->hpr_cause0 & HPR_CAUSE0_MI_HRPD)
+ elog_add_event(ELOG_TYPE_MI_HRPD);
+
+ /* CSME-Initiated Host Reset with power cycle */
+ if (ps->hpr_cause0 & HPR_CAUSE0_MI_HRPC)
+ elog_add_event(ELOG_TYPE_MI_HRPC);
+
+ /* CSME-Initiated Host Reset without power cycle */
+ if (ps->hpr_cause0 & HPR_CAUSE0_MI_HR)
+ elog_add_event(ELOG_TYPE_MI_HR);
+
+ /* PWR_FLR Power Failure */
+ if (ps->gen_pmcon_a & PWR_FLR)
+ elog_add_event(ELOG_TYPE_POWER_FAIL);
+
+ /* SUS Well Power Failure */
+ if (ps->gen_pmcon_a & SUS_PWR_FLR)
+ elog_add_event(ELOG_TYPE_SUS_POWER_FAIL);
+
+ /* TCO Timeout */
+ if (ps->prev_sleep_state != ACPI_S3 &&
+ ps->tco2_sts & TCO_STS_SECOND_TO)
+ elog_add_event(ELOG_TYPE_TCO_RESET);
+
+ /* Power Button Override */
+ if (ps->pm1_sts & PRBTNOR_STS)
+ elog_add_event(ELOG_TYPE_POWER_BUTTON_OVERRIDE);
+
+ /* RTC reset */
+ if (ps->gen_pmcon_b & RTC_BATTERY_DEAD)
+ elog_add_event(ELOG_TYPE_RTC_RESET);
+
+ /* Host Reset Status */
+ if (ps->gen_pmcon_a & HOST_RST_STS)
+ elog_add_event(ELOG_TYPE_SYSTEM_RESET);
+
+ /* ACPI Wake Event */
+ if (ps->prev_sleep_state != ACPI_S0)
+ elog_add_event_byte(ELOG_TYPE_ACPI_WAKE, ps->prev_sleep_state);
+}
+
+static void pch_log_state(void *unused)
+{
+ struct chipset_power_state *ps = pmc_get_power_state();
+
+ if (!ps) {
+ printk(BIOS_ERR, "chipset_power_state not found!\n");
+ return;
+ }
+
+ /* Power and Reset */
+ pch_log_power_and_resets(ps);
+
+ /* Wake Sources */
+ if (ps->prev_sleep_state > ACPI_S0)
+ pch_log_wake_source(ps);
+}
+
+BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_EXIT, pch_log_state, NULL);
+
+void elog_gsmi_cb_platform_log_wake_source(void)
+{
+ struct chipset_power_state ps;
+ pmc_fill_pm_reg_info(&ps);
+ pch_log_wake_source(&ps);
+}
diff --git a/src/soc/intel/alderlake/espi.c b/src/soc/intel/alderlake/espi.c
index bad4ab9..8a4007c 100644
--- a/src/soc/intel/alderlake/espi.c
+++ b/src/soc/intel/alderlake/espi.c
@@ -9,10 +9,14 @@
#include <device/pci.h>
#include <pc80/isa-dma.h>
#include <pc80/i8259.h>
+#include <arch/ioapic.h>
+#include <intelblocks/itss.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/pcr.h>
#include <soc/espi.h>
#include <soc/iomap.h>
+#include <soc/irq.h>
+#include <soc/pci_devs.h>
#include <soc/pcr_ids.h>
#include <soc/soc_chip.h>
@@ -49,3 +53,27 @@
pcr_write32(PID_DMI, PCR_DMI_LPCLGIR3, gen_io_dec[2]);
pcr_write32(PID_DMI, PCR_DMI_LPCLGIR4, gen_io_dec[3]);
}
+
+#if ENV_RAMSTAGE
+void lpc_soc_init(struct device *dev)
+{
+ /* Legacy initialization */
+ isa_dma_init();
+ lpc_pch_misc_init();
+
+ /* Enable CLKRUN_EN for power gating ESPI */
+ lpc_enable_pci_clk_cntl();
+
+ /* Set ESPI Serial IRQ mode */
+ if (CONFIG(SERIRQ_CONTINUOUS_MODE))
+ lpc_set_serirq_mode(SERIRQ_CONTINUOUS);
+ else
+ lpc_set_serirq_mode(SERIRQ_QUIET);
+
+ /* Interrupt configuration */
+ lpc_pch_enable_ioapic();
+ lpc_pch_pirq_init();
+ setup_i8259();
+ i8259_configure_irq_trigger(9, 1);
+}
+#endif
diff --git a/src/soc/intel/alderlake/finalize.c b/src/soc/intel/alderlake/finalize.c
new file mode 100644
index 0000000..24dbbd6
--- /dev/null
+++ b/src/soc/intel/alderlake/finalize.c
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * This file is created based on Intel Alder Lake Processor PCH Datasheet
+ * Document number: 621483
+ * Chapter number: 4, 29
+ */
+
+#include <arch/io.h>
+#include <device/mmio.h>
+#include <bootstate.h>
+#include <console/console.h>
+#include <console/post_codes.h>
+#include <cpu/x86/smm.h>
+#include <device/pci.h>
+#include <intelblocks/lpc_lib.h>
+#include <intelblocks/pcr.h>
+#include <intelblocks/pmclib.h>
+#include <intelblocks/tco.h>
+#include <intelblocks/thermal.h>
+#include <spi-generic.h>
+#include <soc/p2sb.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+#include <soc/pm.h>
+#include <soc/smbus.h>
+#include <soc/soc_chip.h>
+#include <soc/systemagent.h>
+
+#define CAMERA1_CLK 0x8000 /* Camera 1 Clock */
+#define CAMERA2_CLK 0x8080 /* Camera 2 Clock */
+#define CAM_CLK_EN (1 << 1)
+#define MIPI_CLK (1 << 0)
+#define HDPLL_CLK (0 << 0)
+
+static void pch_enable_isclk(void)
+{
+ pcr_or32(PID_ISCLK, CAMERA1_CLK, CAM_CLK_EN | MIPI_CLK);
+ pcr_or32(PID_ISCLK, CAMERA2_CLK, CAM_CLK_EN | MIPI_CLK);
+}
+
+static void pch_handle_sideband(config_t *config)
+{
+ if (config->pch_isclk)
+ pch_enable_isclk();
+}
+
+static void pch_finalize(void)
+{
+ config_t *config;
+
+ /* TCO Lock down */
+ tco_lockdown();
+
+ /* TODO: Add Thermal Configuration */
+
+ /*
+ * Disable ACPI PM timer based on dt policy
+ *
+ * Disabling ACPI PM timer is necessary for XTAL OSC shutdown.
+ * Disabling ACPI PM timer also switches off TCO
+ */
+ config = config_of_soc();
+ if (config->PmTimerDisabled)
+ pmc_disable_acpi_timer();
+
+ /* Disable XTAL shutdown qualification for low power idle. */
+ if (config->s0ix_enable)
+ pmc_ignore_xtal_shutdown();
+
+ pch_handle_sideband(config);
+
+ pmc_clear_pmcon_sts();
+}
+
+static void tbt_finalize(void)
+{
+ int i;
+ const struct device *dev;
+
+ /* Disable Thunderbolt PCIe root ports bus master */
+ for (i = 0; i < NUM_TBT_FUNCTIONS; i++) {
+ dev = pcidev_path_on_root(SA_DEVFN_TBT(i));
+ if (dev)
+ pci_dev_disable_bus_master(dev);
+ }
+}
+
+static void soc_finalize(void *unused)
+{
+ printk(BIOS_DEBUG, "Finalizing chipset.\n");
+
+ pch_finalize();
+ apm_control(APM_CNT_FINALIZE);
+ tbt_finalize();
+
+ /* Indicate finalize step with post code */
+ post_code(POST_OS_BOOT);
+}
+
+BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, soc_finalize, NULL);
+BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, soc_finalize, NULL);
diff --git a/src/soc/intel/alderlake/fsp_params.c b/src/soc/intel/alderlake/fsp_params.c
new file mode 100644
index 0000000..a21ca4a
--- /dev/null
+++ b/src/soc/intel/alderlake/fsp_params.c
@@ -0,0 +1,317 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <assert.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <fsp/api.h>
+#include <fsp/ppi/mp_service_ppi.h>
+#include <fsp/util.h>
+#include <intelblocks/lpss.h>
+#include <intelblocks/xdci.h>
+#include <intelpch/lockdown.h>
+#include <intelblocks/mp_init.h>
+#include <soc/gpio_soc_defs.h>
+#include <soc/intel/common/vbt.h>
+#include <soc/pci_devs.h>
+#include <soc/ramstage.h>
+#include <soc/soc_chip.h>
+#include <string.h>
+
+/* THC assignment definition */
+#define THC_NONE 0
+#define THC_0 1
+#define THC_1 2
+
+/* SATA DEVSLP idle timeout default values */
+#define DEF_DMVAL 15
+#define DEF_DITOVAL 625
+
+/*
+ * Chip config parameter PcieRpL1Substates uses (UPD value + 1)
+ * because UPD value of 0 for PcieRpL1Substates means disabled for FSP.
+ * In order to ensure that mainboard setting does not disable L1 substates
+ * incorrectly, chip config parameter values are offset by 1 with 0 meaning
+ * use FSP UPD default. get_l1_substate_control() ensures that the right UPD
+ * value is set in fsp_params.
+ * 0: Use FSP UPD default
+ * 1: Disable L1 substates
+ * 2: Use L1.1
+ * 3: Use L1.2 (FSP UPD default)
+ */
+static int get_l1_substate_control(enum L1_substates_control ctl)
+{
+ if ((ctl > L1_SS_L1_2) || (ctl == L1_SS_FSP_DEFAULT))
+ ctl = L1_SS_L1_2;
+ return ctl - 1;
+}
+
+static void parse_devicetree(FSP_S_CONFIG *params)
+{
+ const struct soc_intel_alderlake_config *config;
+ config = config_of_soc();
+
+ for (int i = 0; i < CONFIG_SOC_INTEL_I2C_DEV_MAX; i++)
+ params->SerialIoI2cMode[i] = config->SerialIoI2cMode[i];
+
+ for (int i = 0; i < CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX; i++) {
+ params->SerialIoSpiMode[i] = config->SerialIoGSpiMode[i];
+ params->SerialIoSpiCsMode[i] = config->SerialIoGSpiCsMode[i];
+ params->SerialIoSpiCsState[i] = config->SerialIoGSpiCsState[i];
+ }
+
+ for (int i = 0; i < CONFIG_SOC_INTEL_UART_DEV_MAX; i++)
+ params->SerialIoUartMode[i] = config->SerialIoUartMode[i];
+}
+
+static const pci_devfn_t serial_io_dev[] = {
+ PCH_DEVFN_I2C0,
+ PCH_DEVFN_I2C1,
+ PCH_DEVFN_I2C2,
+ PCH_DEVFN_I2C3,
+ PCH_DEVFN_I2C4,
+ PCH_DEVFN_I2C5,
+ PCH_DEVFN_GSPI0,
+ PCH_DEVFN_GSPI1,
+ PCH_DEVFN_GSPI2,
+ PCH_DEVFN_GSPI3,
+ PCH_DEVFN_UART0,
+ PCH_DEVFN_UART1,
+ PCH_DEVFN_UART2
+};
+
+__weak void mainboard_update_soc_chip_config(struct soc_intel_alderlake_config *config)
+{
+ /* Override settings per board. */
+}
+
+/* UPD parameters to be initialized before SiliconInit */
+void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd)
+{
+ int i;
+ FSP_S_CONFIG *params = &supd->FspsConfig;
+
+ struct device *dev;
+ struct soc_intel_alderlake_config *config;
+ config = config_of_soc();
+ mainboard_update_soc_chip_config(config);
+
+ /* Parse device tree and enable/disable Serial I/O devices */
+ parse_devicetree(params);
+
+ /* Load VBT before devicetree-specific config. */
+ params->GraphicsConfigPtr = (uintptr_t)vbt_get();
+
+ /* Check if IGD is present and fill Graphics init param accordingly */
+ dev = pcidev_path_on_root(SA_DEVFN_IGD);
+ params->PeiGraphicsPeimInit = CONFIG(RUN_FSP_GOP) && is_dev_enabled(dev);
+
+ /* Use coreboot MP PPI services if Kconfig is enabled */
+ if (CONFIG(USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI))
+ params->CpuMpPpi = (uintptr_t) mp_fill_ppi_services_data();
+
+ /* D3Hot and D3Cold for TCSS */
+ params->D3HotEnable = !config->TcssD3HotDisable;
+ params->D3ColdEnable = !config->TcssD3ColdDisable;
+
+ params->TcssAuxOri = config->TcssAuxOri;
+ for (i = 0; i < 8; i++)
+ params->IomTypeCPortPadCfg[i] = config->IomTypeCPortPadCfg[i];
+
+ /*
+ * Set FSPS UPD ITbtConnectTopologyTimeoutInMs with value 0. FSP will
+ * evaluate this UPD value and skip sending command. There will be no
+ * delay for command completion.
+ */
+ params->ITbtConnectTopologyTimeoutInMs = 0;
+
+ /* Chipset Lockdown */
+ if (get_lockdown_config() == CHIPSET_LOCKDOWN_COREBOOT) {
+ params->PchLockDownGlobalSmi = 0;
+ params->PchLockDownBiosInterface = 0;
+ params->PchUnlockGpioPads = 1;
+ params->RtcMemoryLock = 0;
+ } else {
+ params->PchLockDownGlobalSmi = 1;
+ params->PchLockDownBiosInterface = 1;
+ params->PchUnlockGpioPads = 0;
+ params->RtcMemoryLock = 1;
+ }
+
+ /* USB */
+ for (i = 0; i < ARRAY_SIZE(config->usb2_ports); i++) {
+ params->PortUsb20Enable[i] = config->usb2_ports[i].enable;
+ params->Usb2PhyPetxiset[i] = config->usb2_ports[i].pre_emp_bias;
+ params->Usb2PhyTxiset[i] = config->usb2_ports[i].tx_bias;
+ params->Usb2PhyPredeemp[i] = config->usb2_ports[i].tx_emp_enable;
+ params->Usb2PhyPehalfbit[i] = config->usb2_ports[i].pre_emp_bit;
+
+ if (config->usb2_ports[i].enable)
+ params->Usb2OverCurrentPin[i] = config->usb2_ports[i].ocpin;
+ else
+ params->Usb2OverCurrentPin[i] = OC_SKIP;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(config->usb3_ports); i++) {
+ params->PortUsb30Enable[i] = config->usb3_ports[i].enable;
+ if (config->usb3_ports[i].enable)
+ params->Usb3OverCurrentPin[i] = config->usb3_ports[i].ocpin;
+ else
+ params->Usb3OverCurrentPin[i] = OC_SKIP;
+
+ if (config->usb3_ports[i].tx_de_emp) {
+ params->Usb3HsioTxDeEmphEnable[i] = 1;
+ params->Usb3HsioTxDeEmph[i] = config->usb3_ports[i].tx_de_emp;
+ }
+ if (config->usb3_ports[i].tx_downscale_amp) {
+ params->Usb3HsioTxDownscaleAmpEnable[i] = 1;
+ params->Usb3HsioTxDownscaleAmp[i] =
+ config->usb3_ports[i].tx_downscale_amp;
+ }
+ }
+
+ /* Enable xDCI controller if enabled in devicetree and allowed */
+ dev = pcidev_path_on_root(PCH_DEVFN_USBOTG);
+ if (dev) {
+ if (!xdci_can_enable())
+ dev->enabled = 0;
+ params->XdciEnable = dev->enabled;
+ } else {
+ params->XdciEnable = 0;
+ }
+
+ /* PCH UART selection for FSP Debug */
+ params->SerialIoDebugUartNumber = CONFIG_UART_FOR_CONSOLE;
+ ASSERT(ARRAY_SIZE(params->SerialIoUartAutoFlow) > CONFIG_UART_FOR_CONSOLE);
+ params->SerialIoUartAutoFlow[CONFIG_UART_FOR_CONSOLE] = 0;
+
+ /* SATA */
+ dev = pcidev_path_on_root(PCH_DEVFN_SATA);
+ params->SataEnable = is_dev_enabled(dev);
+ if (params->SataEnable) {
+ params->SataMode = config->SataMode;
+ params->SataSalpSupport = config->SataSalpSupport;
+ memcpy(params->SataPortsEnable, config->SataPortsEnable,
+ sizeof(params->SataPortsEnable));
+ memcpy(params->SataPortsDevSlp, config->SataPortsDevSlp,
+ sizeof(params->SataPortsDevSlp));
+ }
+
+ /*
+ * Power Optimizer for DMI and SATA.
+ * DmiPwrOptimizeDisable and SataPwrOptimizeDisable is default to 0.
+ * Boards not needing the optimizers explicitly disables them by setting
+ * these disable variables to 1 in devicetree overrides.
+ */
+ params->PchPwrOptEnable = !(config->DmiPwrOptimizeDisable);
+ params->SataPwrOptEnable = !(config->SataPwrOptimizeDisable);
+
+ /*
+ * Enable DEVSLP Idle Timeout settings DmVal and DitoVal.
+ * SataPortsDmVal is the DITO multiplier. Default is 15.
+ * SataPortsDitoVal is the DEVSLP Idle Timeout (DITO), Default is 625ms.
+ * The default values can be changed from devicetree.
+ */
+ for (i = 0; i < ARRAY_SIZE(config->SataPortsEnableDitoConfig); i++) {
+ if (config->SataPortsEnableDitoConfig[i]) {
+ params->SataPortsDmVal[i] = config->SataPortsDmVal[i];
+ params->SataPortsDitoVal[i] = config->SataPortsDitoVal[i];
+ }
+ }
+
+ /* Enable TCPU for processor thermal control */
+ dev = pcidev_path_on_root(SA_DEVFN_DPTF);
+ params->Device4Enable = is_dev_enabled(dev);
+
+ /* Set TccActivationOffset */
+ params->TccActivationOffset = config->tcc_offset;
+
+ /* LAN */
+ dev = pcidev_path_on_root(PCH_DEVFN_GBE);
+ params->PchLanEnable = is_dev_enabled(dev);
+
+ /* CNVi */
+ dev = pcidev_path_on_root(PCH_DEVFN_CNVI_WIFI);
+ params->CnviMode = is_dev_enabled(dev);
+
+ /* CNVi BT Core */
+ dev = pcidev_path_on_root(PCH_DEVFN_CNVI_BT);
+ params->CnviBtCore = is_dev_enabled(dev);
+
+ /* CNVi BT Audio Offload */
+ params->CnviBtAudioOffload = config->CnviBtAudioOffload;
+
+ /* VMD */
+ dev = pcidev_path_on_root(SA_DEVFN_VMD);
+ params->VmdEnable = is_dev_enabled(dev);
+
+ /* THC */
+ dev = pcidev_path_on_root(PCH_DEVFN_THC0);
+ params->ThcPort0Assignment = is_dev_enabled(dev) ? THC_0 : THC_NONE;
+
+ dev = pcidev_path_on_root(PCH_DEVFN_THC1);
+ params->ThcPort1Assignment = is_dev_enabled(dev) ? THC_1 : THC_NONE;
+
+ /* Legacy 8254 timer support */
+ params->Enable8254ClockGating = !CONFIG(USE_LEGACY_8254_TIMER);
+ params->Enable8254ClockGatingOnS3 = !CONFIG(USE_LEGACY_8254_TIMER);
+
+ /* Enable Hybrid storage auto detection */
+ params->HybridStorageMode = config->HybridStorageMode;
+
+ for (i = 0; i < CONFIG_MAX_ROOT_PORTS; i++) {
+ params->PcieRpL1Substates[i] =
+ get_l1_substate_control(config->PcieRpL1Substates[i]);
+ params->PcieRpLtrEnable[i] = config->PcieRpLtrEnable[i];
+ params->PcieRpAdvancedErrorReporting[i] =
+ config->PcieRpAdvancedErrorReporting[i];
+ params->PcieRpHotPlug[i] = config->PcieRpHotPlug[i];
+ }
+
+ /* Enable ClkReqDetect for enabled port */
+ memcpy(params->PcieRpClkReqDetect, config->PcieRpClkReqDetect,
+ sizeof(config->PcieRpClkReqDetect));
+
+ params->PmSupport = 1;
+ params->Hwp = 1;
+ params->Cx = 1;
+ params->PsOnEnable = 1;
+
+ mainboard_silicon_init_params(params);
+}
+
+int soc_fsp_multi_phase_init_is_enable(void)
+{
+ return 0;
+}
+
+/*
+ * Callbacks for SoC/Mainboard specific overrides for FspMultiPhaseSiInit
+ * This platform supports below MultiPhaseSIInit Phase(s):
+ * Phase | FSP return point | Purpose
+ * ------- + ------------------------------------------------ + -------------------------------
+ * 1 | After TCSS initialization completed | for TCSS specific init
+ */
+void platform_fsp_multi_phase_init_cb(uint32_t phase_index)
+{
+ switch (phase_index) {
+ case 1:
+ /* TCSS specific initialization here */
+ break;
+ default:
+ break;
+ }
+}
+
+/* Mainboard GPIO Configuration */
+__weak void mainboard_silicon_init_params(FSP_S_CONFIG *params)
+{
+ printk(BIOS_DEBUG, "WEAK: %s/%s called\n", __FILE__, __func__);
+}
+
+/* Return list of SOC LPSS controllers */
+const pci_devfn_t *soc_lpss_controllers_list(size_t *size)
+{
+ *size = ARRAY_SIZE(serial_io_dev);
+ return serial_io_dev;
+}
diff --git a/src/soc/intel/alderlake/gspi.c b/src/soc/intel/alderlake/gspi.c
new file mode 100644
index 0000000..dd07b07
--- /dev/null
+++ b/src/soc/intel/alderlake/gspi.c
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * This file is created based on Intel Alder Lake Processor PCH Datasheet
+ * Document number: 621483
+ * Chapter number: 11
+ */
+
+#include <intelblocks/gspi.h>
+#include <soc/pci_devs.h>
+
+int gspi_soc_bus_to_devfn(unsigned int gspi_bus)
+{
+ switch (gspi_bus) {
+ case 0:
+ return PCH_DEVFN_GSPI0;
+ case 1:
+ return PCH_DEVFN_GSPI1;
+ case 2:
+ return PCH_DEVFN_GSPI2;
+ case 3:
+ return PCH_DEVFN_GSPI3;
+ }
+ return -1;
+}
diff --git a/src/soc/intel/alderlake/i2c.c b/src/soc/intel/alderlake/i2c.c
new file mode 100644
index 0000000..ef34e2e
--- /dev/null
+++ b/src/soc/intel/alderlake/i2c.c
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * This file is created based on Intel Alder Lake Processor PCH Datasheet
+ * Document number: 621483
+ * Chapter number: 13
+ */
+
+#include <device/device.h>
+#include <drivers/i2c/designware/dw_i2c.h>
+#include <soc/pci_devs.h>
+
+int dw_i2c_soc_devfn_to_bus(unsigned int devfn)
+{
+ switch (devfn) {
+ case PCH_DEVFN_I2C0:
+ return 0;
+ case PCH_DEVFN_I2C1:
+ return 1;
+ case PCH_DEVFN_I2C2:
+ return 2;
+ case PCH_DEVFN_I2C3:
+ return 3;
+ case PCH_DEVFN_I2C4:
+ return 4;
+ case PCH_DEVFN_I2C5:
+ return 5;
+ }
+ return -1;
+}
+
+int dw_i2c_soc_bus_to_devfn(unsigned int bus)
+{
+ switch (bus) {
+ case 0:
+ return PCH_DEVFN_I2C0;
+ case 1:
+ return PCH_DEVFN_I2C1;
+ case 2:
+ return PCH_DEVFN_I2C2;
+ case 3:
+ return PCH_DEVFN_I2C3;
+ case 4:
+ return PCH_DEVFN_I2C4;
+ case 5:
+ return PCH_DEVFN_I2C5;
+ }
+ return -1;
+}
diff --git a/src/soc/intel/alderlake/include/soc/cpu.h b/src/soc/intel/alderlake/include/soc/cpu.h
new file mode 100644
index 0000000..3c11183
--- /dev/null
+++ b/src/soc/intel/alderlake/include/soc/cpu.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _SOC_ALDERLAKE_CPU_H_
+#define _SOC_ALDERLAKE_CPU_H_
+
+/* Latency times in us */
+#define C1_LATENCY 1
+#define C6_LATENCY 127
+#define C7_LATENCY 253
+#define C8_LATENCY 260
+#define C9_LATENCY 487
+#define C10_LATENCY 1048
+
+/* Power in units of mW */
+#define C1_POWER 0x3e8
+#define C6_POWER 0x15e
+#define C7_POWER 0xc8
+#define C8_POWER 0xc8
+#define C9_POWER 0xc8
+#define C10_POWER 0xc8
+
+/* Common Timer Copy (CTC) frequency - 38.4MHz. */
+#define CTC_FREQ 38400000
+
+#endif
diff --git a/src/soc/intel/alderlake/include/soc/irq.h b/src/soc/intel/alderlake/include/soc/irq.h
new file mode 100644
index 0000000..98e3f42
--- /dev/null
+++ b/src/soc/intel/alderlake/include/soc/irq.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _SOC_IRQ_H_
+#define _SOC_IRQ_H_
+
+#define GPIO_IRQ14 14
+#define GPIO_IRQ15 15
+
+#define PCH_IRQ10 10
+#define PCH_IRQ11 11
+
+#define LPSS_I2C0_IRQ 27
+#define LPSS_I2C1_IRQ 40
+#define LPSS_I2C2_IRQ 29
+#define LPSS_I2C3_IRQ 30
+#define LPSS_I2C4_IRQ 31
+#define LPSS_I2C5_IRQ 32
+#define LPSS_SPI0_IRQ 36
+#define LPSS_SPI1_IRQ 37
+#define LPSS_SPI2_IRQ 34
+#define LPSS_SPI3_IRQ 43
+
+#define LPSS_UART0_IRQ 16
+#define LPSS_UART1_IRQ 17
+#define LPSS_UART2_IRQ 33
+
+#define HDA_IRQ 16
+#define SMBUS_IRQ 16
+#define TRACEHUB_IRQ 16
+
+#define PCIE_1_IRQ 16
+#define PCIE_2_IRQ 17
+#define PCIE_3_IRQ 18
+#define PCIE_4_IRQ 19
+#define PCIE_5_IRQ 16
+#define PCIE_6_IRQ 17
+#define PCIE_7_IRQ 18
+#define PCIE_8_IRQ 19
+#define PCIE_9_IRQ 16
+#define PCIE_10_IRQ 17
+#define PCIE_11_IRQ 18
+#define PCIE_12_IRQ 19
+
+#define SATA_IRQ 16
+
+#define xHCI_IRQ 16
+#define xDCI_IRQ 17
+#define CNVI_WIFI_IRQ 16
+
+#define CNVI_BT_IRQ 18
+
+#define THC0_IRQ 23
+#define THC1_IRQ 24
+
+#define ISH_IRQ 16
+
+#define TBT_PCIe0_IRQ 16
+#define TBT_PCIe1_IRQ 17
+#define TBT_PCIe2_IRQ 18
+#define TBT_PCIe3_IRQ 19
+
+#define HECI_1_IRQ 16
+#define HECI_2_IRQ 17
+#define HECI_3_IRQ 16
+#define HECI_4_IRQ 19
+
+#define PEG_IRQ 16
+#define IGFX_IRQ 16
+#define THERMAL_IRQ 16
+#define IPU_IRQ 16
+#define GNA_IRQ 16
+#endif
diff --git a/src/soc/intel/alderlake/include/soc/itss.h b/src/soc/intel/alderlake/include/soc/itss.h
new file mode 100644
index 0000000..ff26c9f
--- /dev/null
+++ b/src/soc/intel/alderlake/include/soc/itss.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef SOC_INTEL_ADL_ITSS_H
+#define SOC_INTEL_ADL_ITSS_H
+
+#define GPIO_IRQ_START 50
+#define GPIO_IRQ_END ITSS_MAX_IRQ
+
+#define ITSS_MAX_IRQ 119
+#define IRQS_PER_IPC 32
+#define NUM_IPC_REGS ((ITSS_MAX_IRQ + IRQS_PER_IPC - 1)/IRQS_PER_IPC)
+
+#endif /* SOC_INTEL_ADL_ITSS_H */
diff --git a/src/soc/intel/alderlake/include/soc/me.h b/src/soc/intel/alderlake/include/soc/me.h
new file mode 100644
index 0000000..993a3bc
--- /dev/null
+++ b/src/soc/intel/alderlake/include/soc/me.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ALDERLAKE_ME_H_
+#define _ALDERLAKE_ME_H_
+
+#include <stdint.h>
+
+/* ME Host Firmware Status register 1 */
+union me_hfsts1 {
+ u32 data;
+ struct {
+ u32 working_state: 4;
+ u32 spi_protection_mode: 1;
+ u32 fpt_bad: 1;
+ u32 operation_state: 3;
+ u32 fw_init_complete: 1;
+ u32 ft_bup_ld_flr: 1;
+ u32 update_in_progress: 1;
+ u32 error_code: 4;
+ u32 operation_mode: 4;
+ u32 reset_count: 4;
+ u32 boot_options_present: 1;
+ u32 invoke_enhance_dbg_mode: 1;
+ u32 bist_test_state: 1;
+ u32 bist_reset_request: 1;
+ u32 current_power_source: 2;
+ u32 reserved: 1;
+ u32 d0i3_support_valid: 1;
+ } __packed fields;
+};
+
+/* ME Host Firmware Status Register 3 */
+union me_hfsts3 {
+ u32 data;
+ struct {
+ u32 reserved_0: 4;
+ u32 fw_sku: 3;
+ u32 reserved_7: 2;
+ u32 reserved_9: 2;
+ u32 resered_11: 3;
+ u32 resered_14: 16;
+ u32 reserved_30: 2;
+ } __packed fields;
+};
+#endif /* _ALDERLAKE_ME_H_ */
diff --git a/src/soc/intel/alderlake/include/soc/meminit.h b/src/soc/intel/alderlake/include/soc/meminit.h
new file mode 100644
index 0000000..76930be
--- /dev/null
+++ b/src/soc/intel/alderlake/include/soc/meminit.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _SOC_ALDERLAKE_MEMINIT_H_
+#define _SOC_ALDERLAKE_MEMINIT_H_
+
+#include <stddef.h>
+#include <stdint.h>
+#include <fsp/soc_binding.h>
+
+#define BYTES_PER_CHANNEL 2
+#define BITS_PER_BYTE 8
+#define DQS_PER_CHANNEL 2
+
+/* 64-bit Channel identification */
+enum {
+ DDR_CH0,
+ DDR_CH1,
+ DDR_CH2,
+ DDR_CH3,
+ DDR_CH4,
+ DDR_CH5,
+ DDR_CH6,
+ DDR_CH7,
+ DDR_NUM_CHANNELS
+};
+/* Number of memory DIMM slots available on Alderlake board */
+#define NUM_DIMM_SLOT 16
+
+struct spd_by_pointer {
+ size_t spd_data_len;
+ uintptr_t spd_data_ptr;
+};
+
+enum mem_info_read_type {
+ NOT_EXISTING, /* No memory in this slot */
+ READ_SMBUS, /* Read on-module spd by SMBUS. */
+ READ_SPD_CBFS, /* Find SPD file in CBFS. */
+ READ_SPD_MEMPTR /* Find SPD data from pointer. */
+};
+
+struct spd_info {
+ enum mem_info_read_type read_type;
+ union spd_data_by {
+ /* To read on-module SPD when read_type is READ_SMBUS. */
+ uint8_t spd_smbus_address[NUM_DIMM_SLOT];
+
+ /* To identify SPD file when read_type is READ_SPD_CBFS. */
+ int spd_index;
+
+ /* To find SPD data when read_type is READ_SPD_MEMPTR. */
+ struct spd_by_pointer spd_data_ptr_info;
+ } spd_spec;
+};
+
+/* Board-specific memory configuration information */
+struct mb_cfg {
+ /* DQ mapping */
+ uint8_t dq_map[DDR_NUM_CHANNELS][BYTES_PER_CHANNEL * BITS_PER_BYTE];
+
+ /*
+ * DQS CPU<>DRAM map. Each array entry represents a
+ * mapping of a dq bit on the CPU to the bit it's connected to on
+ * the memory part. The array index represents the dqs bit number
+ * on the memory part, and the values in the array represent which
+ * pin on the CPU that DRAM pin connects to.
+ */
+ uint8_t dqs_map[DDR_NUM_CHANNELS][DQS_PER_CHANNEL];
+
+ /*
+ * Rcomp resistor values. These values represent the resistance in
+ * ohms of the three rcomp resistors attached to the DDR_COMP_0,
+ * DDR_COMP_1, and DDR_COMP_2 pins on the DRAM.
+ */
+ uint16_t rcomp_resistor[3];
+
+ /* Rcomp target values. */
+ uint16_t rcomp_targets[5];
+
+ /*
+ * Early Command Training Enable/Disable Control
+ * TRUE = enable, FALSE = disable
+ */
+ bool ect;
+
+ /* Board type */
+ uint8_t UserBd;
+};
+
+/*
+ * Initialize default memory configurations for Alder Lake.
+ */
+
+void memcfg_init(FSP_M_CONFIG *mem_cfg, const struct mb_cfg *board_cfg,
+ const struct spd_info *spd_info, bool half_populated);
+
+#endif /* _SOC_ALDERLAKE_MEMINIT_H_ */
diff --git a/src/soc/intel/alderlake/include/soc/nvs.h b/src/soc/intel/alderlake/include/soc/nvs.h
new file mode 100644
index 0000000..5129458
--- /dev/null
+++ b/src/soc/intel/alderlake/include/soc/nvs.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _SOC_NVS_H_
+#define _SOC_NVS_H_
+
+#include <intelblocks/nvs.h>
+
+#endif
diff --git a/src/soc/intel/alderlake/include/soc/pci_devs.h b/src/soc/intel/alderlake/include/soc/pci_devs.h
index eedcc27..d86e81d 100644
--- a/src/soc/intel/alderlake/include/soc/pci_devs.h
+++ b/src/soc/intel/alderlake/include/soc/pci_devs.h
@@ -30,6 +30,10 @@
#define SA_DEVFN_DPTF PCI_DEVFN(SA_DEV_SLOT_DPTF, 0)
#define SA_DEV_DPTF PCI_DEV(0, SA_DEV_SLOT_DPTF, 0)
+#define SA_DEV_SLOT_IPU 0x05
+#define SA_DEVFN_IPU PCI_DEVFN(SA_DEV_SLOT_IPU, 0)
+#define SA_DEV_IPU PCI_DEV(0, SA_DEV_SLOT_IPU, 0)
+
#define SA_DEV_SLOT_CPU_PCIE 0x06
#define SA_DEVFN_CPU_PCIE PCI_DEVFN(SA_DEV_SLOT_CPU_PCIE, 0)
@@ -63,8 +67,10 @@
#define PCH_DEV_SLOT_SIO0 0x10
#define PCH_DEVFN_THC0 _PCH_DEVFN(SIO0, 0)
#define PCH_DEVFN_THC1 _PCH_DEVFN(SIO0, 1)
+#define PCH_DEVFN_CNVI_BT _PCH_DEVFN(SIO0, 2)
#define PCH_DEV_THC0 _PCH_DEV(SIO0, 0)
#define PCH_DEV_THC1 _PCH_DEV(SIO0, 1)
+#define PCH_DEV_CNVI_BT _PCH_DEV(SIO0, 2)
#define PCH_DEV_SLOT_ISH 0x12
#define PCH_DEVFN_ISH _PCH_DEVFN(ISH, 0)
@@ -72,6 +78,10 @@
#define PCH_DEV_ISH _PCH_DEV(ISH, 0)
#define PCH_DEV_GSPI2 _PCH_DEV(ISH, 6)
+#define PCH_DEV_SLOT_SIO2 0x13
+#define PCH_DEVFN_GSPI3 _PCH_DEVFN(SIO2, 0)
+#define PCH_DEV_GSPI3 _PCH_DEV(SIO2, 0)
+
#define PCH_DEV_SLOT_XHCI 0x14
#define PCH_DEVFN_XHCI _PCH_DEVFN(XHCI, 0)
#define PCH_DEVFN_USBOTG _PCH_DEVFN(XHCI, 1)
diff --git a/src/soc/intel/alderlake/include/soc/pmc.h b/src/soc/intel/alderlake/include/soc/pmc.h
index 03fe02f..e4e3dfb 100644
--- a/src/soc/intel/alderlake/include/soc/pmc.h
+++ b/src/soc/intel/alderlake/include/soc/pmc.h
@@ -2,6 +2,9 @@
#ifndef _SOC_ALDERLAKE_PMC_H_
#define _SOC_ALDERLAKE_PMC_H_
+#include <device/device.h>
+
+extern struct device_operations pmc_ops;
/* PCI Configuration Space (D31:F2): PMC */
#define PWRMBASE 0x10
diff --git a/src/soc/intel/alderlake/include/soc/ramstage.h b/src/soc/intel/alderlake/include/soc/ramstage.h
new file mode 100644
index 0000000..e655198
--- /dev/null
+++ b/src/soc/intel/alderlake/include/soc/ramstage.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _SOC_RAMSTAGE_H_
+#define _SOC_RAMSTAGE_H_
+
+#include <fsp/api.h>
+#include <fsp/util.h>
+#include <soc/soc_chip.h>
+
+void mainboard_silicon_init_params(FSP_S_CONFIG *params);
+void mainboard_update_soc_chip_config(struct soc_intel_alderlake_config *config);
+void soc_init_pre_device(void *chip_info);
+
+#endif
diff --git a/src/soc/intel/alderlake/include/soc/serialio.h b/src/soc/intel/alderlake/include/soc/serialio.h
new file mode 100644
index 0000000..e42af5f
--- /dev/null
+++ b/src/soc/intel/alderlake/include/soc/serialio.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _SERIALIO_H_
+#define _SERIALIO_H_
+
+enum {
+ PchSerialIoDisabled,
+ PchSerialIoPci,
+ PchSerialIoHidden,
+ PchSerialIoLegacyUart,
+ PchSerialIoSkipInit
+};
+
+enum {
+ PchSerialIoIndexI2C0,
+ PchSerialIoIndexI2C1,
+ PchSerialIoIndexI2C2,
+ PchSerialIoIndexI2C3,
+ PchSerialIoIndexI2C4,
+ PchSerialIoIndexI2C5,
+};
+
+enum {
+ PchSerialIoIndexGSPI0,
+ PchSerialIoIndexGSPI1,
+ PchSerialIoIndexGSPI2,
+ PchSerialIoIndexGSPI3,
+};
+
+enum {
+ PchSerialIoIndexUART0,
+ PchSerialIoIndexUART1,
+ PchSerialIoIndexUART2,
+};
+
+#endif
diff --git a/src/soc/intel/alderlake/include/soc/systemagent.h b/src/soc/intel/alderlake/include/soc/systemagent.h
index b564e7d..ebb3d71 100644
--- a/src/soc/intel/alderlake/include/soc/systemagent.h
+++ b/src/soc/intel/alderlake/include/soc/systemagent.h
@@ -31,10 +31,7 @@
#define IMRBASE 0x6a40
#define IMRLIMIT 0x6a48
#define IPUVTBAR 0x7880
-#define TBT0BAR 0x7888
-#define TBT1BAR 0x7890
-#define TBT2BAR 0x7898
-#define TBT3BAR 0x78a0
+#define TBTxBAR(x) (0x7888 + (x) * 8)
#define MAX_TBT_PCIE_PORT 4
@@ -44,10 +41,10 @@
static const struct sa_mmio_descriptor soc_vtd_resources[] = {
{ GFXVTBAR, GFXVT_BASE_ADDRESS, GFXVT_BASE_SIZE, "GFXVTBAR" },
{ IPUVTBAR, IPUVT_BASE_ADDRESS, IPUVT_BASE_SIZE, "IPUVTBAR" },
- { TBT0BAR, TBT0_BASE_ADDRESS, TBT0_BASE_SIZE, "TBT0BAR" },
- { TBT1BAR, TBT1_BASE_ADDRESS, TBT1_BASE_SIZE, "TBT1BAR" },
- { TBT2BAR, TBT2_BASE_ADDRESS, TBT2_BASE_SIZE, "TBT2BAR" },
- { TBT3BAR, TBT3_BASE_ADDRESS, TBT3_BASE_SIZE, "TBT3BAR" },
+ { TBTxBAR(0), TBT0_BASE_ADDRESS, TBT0_BASE_SIZE, "TBT0BAR" },
+ { TBTxBAR(1), TBT1_BASE_ADDRESS, TBT1_BASE_SIZE, "TBT1BAR" },
+ { TBTxBAR(2), TBT2_BASE_ADDRESS, TBT2_BASE_SIZE, "TBT2BAR" },
+ { TBTxBAR(3), TBT3_BASE_ADDRESS, TBT3_BASE_SIZE, "TBT3BAR" },
{ VTVC0BAR, VTVC0_BASE_ADDRESS, VTVC0_BASE_SIZE, "VTVC0BAR" },
};
diff --git a/src/soc/intel/alderlake/include/soc/usb.h b/src/soc/intel/alderlake/include/soc/usb.h
new file mode 100644
index 0000000..846849a
--- /dev/null
+++ b/src/soc/intel/alderlake/include/soc/usb.h
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _SOC_USB_H_
+#define _SOC_USB_H_
+
+#include <stdint.h>
+
+/* Per Port HS Transmitter Emphasis */
+#define USB2_EMP_OFF 0
+#define USB2_DE_EMP_ON 1
+#define USB2_PRE_EMP_ON 2
+#define USB2_DE_EMP_ON_PRE_EMP_ON 3
+
+/* Per Port Half Bit Pre-emphasis */
+#define USB2_FULL_BIT_PRE_EMP 0
+#define USB2_HALF_BIT_PRE_EMP 1
+
+/* Per Port HS Preemphasis Bias */
+#define USB2_BIAS_0MV 0
+#define USB2_BIAS_11P25MV 1
+#define USB2_BIAS_16P9MV 2
+#define USB2_BIAS_28P15MV 3
+#define USB2_BIAS_39P35MV 5
+#define USB2_BIAS_45MV 6
+#define USB2_BIAS_56P3MV 7
+
+struct usb2_port_config {
+ uint8_t enable;
+ uint8_t ocpin;
+ uint8_t tx_bias;
+ uint8_t tx_emp_enable;
+ uint8_t pre_emp_bias;
+ uint8_t pre_emp_bit;
+};
+
+/* USB Overcurrent pins definition */
+enum {
+ OC0 = 0,
+ OC1,
+ OC2,
+ OC3,
+ OC4,
+ OC5,
+ OC6,
+ OC7,
+ OCMAX,
+ OC_SKIP = 0xff, /* Skip OC programming */
+};
+
+/* Standard USB Port based on length:
+ * - External
+ * - Back Panel
+ * - OTG
+ * - M.2
+ * - Internal device down */
+
+#define USB2_PORT_EMPTY { \
+ .enable = 0, \
+ .ocpin = OC_SKIP, \
+ .tx_bias = USB2_BIAS_0MV, \
+ .tx_emp_enable = USB2_EMP_OFF, \
+ .pre_emp_bias = USB2_BIAS_0MV, \
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \
+}
+
+/* Length = 11.5"-12" */
+#define USB2_PORT_LONG(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_bias = USB2_BIAS_39P35MV, \
+ .tx_emp_enable = USB2_PRE_EMP_ON, \
+ .pre_emp_bias = USB2_BIAS_56P3MV, \
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \
+}
+
+/* Length = 6"-11.49" */
+#define USB2_PORT_MID(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_bias = USB2_BIAS_0MV, \
+ .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, \
+ .pre_emp_bias = USB2_BIAS_45MV, \
+ .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, \
+}
+
+/* Length = 3"-5.99" */
+#define USB2_PORT_SHORT(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_bias = USB2_BIAS_39P35MV, \
+ .tx_emp_enable = USB2_PRE_EMP_ON | USB2_DE_EMP_ON, \
+ .pre_emp_bias = USB2_BIAS_39P35MV, \
+ .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, \
+}
+
+/* Max TX and Pre-emp settings */
+#define USB2_PORT_MAX(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_bias = USB2_BIAS_56P3MV, \
+ .tx_emp_enable = USB2_PRE_EMP_ON, \
+ .pre_emp_bias = USB2_BIAS_56P3MV, \
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \
+}
+
+/* Type-C Port, no BC1.2 charge detect module / MUX
+ * Length = 3.0" - 9.00" */
+#define USB2_PORT_TYPE_C(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_bias = USB2_BIAS_0MV, \
+ .tx_emp_enable = USB2_PRE_EMP_ON, \
+ .pre_emp_bias = USB2_BIAS_56P3MV, \
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \
+}
+
+struct usb3_port_config {
+ uint8_t enable;
+ uint8_t ocpin;
+ uint8_t tx_de_emp;
+ uint8_t tx_downscale_amp;
+};
+
+#define USB3_PORT_EMPTY { \
+ .enable = 0, \
+ .ocpin = OC_SKIP, \
+ .tx_de_emp = 0x00, \
+ .tx_downscale_amp = 0x00, \
+}
+
+#define USB3_PORT_DEFAULT(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_de_emp = 0x0, \
+ .tx_downscale_amp = 0x00, \
+}
+
+#endif
diff --git a/src/soc/intel/alderlake/lockdown.c b/src/soc/intel/alderlake/lockdown.c
new file mode 100644
index 0000000..e9e4b59
--- /dev/null
+++ b/src/soc/intel/alderlake/lockdown.c
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * This file is created based on Intel Alder Lake Processor PCH Datasheet
+ * Document number: 621483
+ * Chapter number: 4
+ */
+
+#include <device/mmio.h>
+#include <intelblocks/cfg.h>
+#include <intelpch/lockdown.h>
+#include <soc/pm.h>
+#include <stdint.h>
+
+static void pmc_lock_pmsync(void)
+{
+ uint8_t *pmcbase;
+ uint32_t pmsyncreg;
+
+ pmcbase = pmc_mmio_regs();
+
+ pmsyncreg = read32(pmcbase + PMSYNC_TPR_CFG);
+ pmsyncreg |= PCH2CPU_TPR_CFG_LOCK;
+ write32(pmcbase + PMSYNC_TPR_CFG, pmsyncreg);
+}
+
+static void pmc_lock_abase(void)
+{
+ uint8_t *pmcbase;
+ uint32_t reg32;
+
+ pmcbase = pmc_mmio_regs();
+
+ reg32 = read32(pmcbase + GEN_PMCON_B);
+ reg32 |= (SLP_STR_POL_LOCK | ACPI_BASE_LOCK);
+ write32(pmcbase + GEN_PMCON_B, reg32);
+}
+
+static void pmc_lock_smi(void)
+{
+ uint8_t *pmcbase;
+ uint8_t reg8;
+
+ pmcbase = pmc_mmio_regs();
+
+ reg8 = read8(pmcbase + GEN_PMCON_B);
+ reg8 |= SMI_LOCK;
+ write8(pmcbase + GEN_PMCON_B, reg8);
+}
+
+static void pmc_lockdown_cfg(int chipset_lockdown)
+{
+ /* PMSYNC */
+ pmc_lock_pmsync();
+ /* Lock down ABASE and sleep stretching policy */
+ pmc_lock_abase();
+
+ if (chipset_lockdown == CHIPSET_LOCKDOWN_COREBOOT)
+ pmc_lock_smi();
+}
+
+void soc_lockdown_config(int chipset_lockdown)
+{
+ /* PMC lock down configuration */
+ pmc_lockdown_cfg(chipset_lockdown);
+}
diff --git a/src/soc/intel/alderlake/me.c b/src/soc/intel/alderlake/me.c
new file mode 100644
index 0000000..da1a299
--- /dev/null
+++ b/src/soc/intel/alderlake/me.c
@@ -0,0 +1,167 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <bootstate.h>
+#include <intelblocks/cse.h>
+#include <console/console.h>
+#include <soc/me.h>
+#include <stdint.h>
+
+/* Host Firmware Status Register 2 */
+union me_hfsts2 {
+ uint32_t data;
+ struct {
+ uint32_t nftp_load_failure : 1;
+ uint32_t icc_prog_status : 2;
+ uint32_t invoke_mebx : 1;
+ uint32_t cpu_replaced : 1;
+ uint32_t rsvd0 : 1;
+ uint32_t mfs_failure : 1;
+ uint32_t warm_reset_rqst : 1;
+ uint32_t cpu_replaced_valid : 1;
+ uint32_t low_power_state : 1;
+ uint32_t me_power_gate : 1;
+ uint32_t ipu_needed : 1;
+ uint32_t forced_safe_boot : 1;
+ uint32_t rsvd1 : 2;
+ uint32_t listener_change : 1;
+ uint32_t status_data : 8;
+ uint32_t current_pmevent : 4;
+ uint32_t phase : 4;
+ } __packed fields;
+};
+
+/* Host Firmware Status Register 4 */
+union me_hfsts4 {
+ uint32_t data;
+ struct {
+ uint32_t rsvd0 : 9;
+ uint32_t enforcement_flow : 1;
+ uint32_t sx_resume_type : 1;
+ uint32_t rsvd1 : 1;
+ uint32_t tpms_disconnected : 1;
+ uint32_t rvsd2 : 1;
+ uint32_t fwsts_valid : 1;
+ uint32_t boot_guard_self_test : 1;
+ uint32_t rsvd3 : 16;
+ } __packed fields;
+};
+
+/* Host Firmware Status Register 5 */
+union me_hfsts5 {
+ uint32_t data;
+ struct {
+ uint32_t acm_active : 1;
+ uint32_t valid : 1;
+ uint32_t result_code_source : 1;
+ uint32_t error_status_code : 5;
+ uint32_t acm_done_sts : 1;
+ uint32_t timeout_count : 7;
+ uint32_t scrtm_indicator : 1;
+ uint32_t inc_boot_guard_acm : 4;
+ uint32_t inc_key_manifest : 4;
+ uint32_t inc_boot_policy : 4;
+ uint32_t rsvd0 : 2;
+ uint32_t start_enforcement : 1;
+ } __packed fields;
+};
+
+/* Host Firmware Status Register 6 */
+union me_hfsts6 {
+ uint32_t data;
+ struct {
+ uint32_t force_boot_guard_acm : 1;
+ uint32_t cpu_debug_disable : 1;
+ uint32_t bsp_init_disable : 1;
+ uint32_t protect_bios_env : 1;
+ uint32_t rsvd0 : 2;
+ uint32_t error_enforce_policy : 2;
+ uint32_t measured_boot : 1;
+ uint32_t verified_boot : 1;
+ uint32_t boot_guard_acmsvn : 4;
+ uint32_t kmsvn : 4;
+ uint32_t bpmsvn : 4;
+ uint32_t key_manifest_id : 4;
+ uint32_t boot_policy_status : 1;
+ uint32_t error : 1;
+ uint32_t boot_guard_disable : 1;
+ uint32_t fpf_disable : 1;
+ uint32_t fpf_soc_lock : 1;
+ uint32_t txt_support : 1;
+ } __packed fields;
+};
+
+static void dump_me_status(void *unused)
+{
+ union me_hfsts1 hfsts1;
+ union me_hfsts2 hfsts2;
+ union me_hfsts3 hfsts3;
+ union me_hfsts4 hfsts4;
+ union me_hfsts5 hfsts5;
+ union me_hfsts6 hfsts6;
+
+ if (!is_cse_enabled())
+ return;
+
+ hfsts1.data = me_read_config32(PCI_ME_HFSTS1);
+ hfsts2.data = me_read_config32(PCI_ME_HFSTS2);
+ hfsts3.data = me_read_config32(PCI_ME_HFSTS3);
+ hfsts4.data = me_read_config32(PCI_ME_HFSTS4);
+ hfsts5.data = me_read_config32(PCI_ME_HFSTS5);
+ hfsts6.data = me_read_config32(PCI_ME_HFSTS6);
+
+ printk(BIOS_DEBUG, "ME: HFSTS1 : 0x%08X\n", hfsts1.data);
+ printk(BIOS_DEBUG, "ME: HFSTS2 : 0x%08X\n", hfsts2.data);
+ printk(BIOS_DEBUG, "ME: HFSTS3 : 0x%08X\n", hfsts3.data);
+ printk(BIOS_DEBUG, "ME: HFSTS4 : 0x%08X\n", hfsts4.data);
+ printk(BIOS_DEBUG, "ME: HFSTS5 : 0x%08X\n", hfsts5.data);
+ printk(BIOS_DEBUG, "ME: HFSTS6 : 0x%08X\n", hfsts6.data);
+
+ /*
+ * Lock Descriptor, and Fuses must be programmed on a
+ * production system to indicate ME Manufacturing mode is disabled.
+ */
+ printk(BIOS_DEBUG, "ME: Manufacturing Mode : %s\n",
+ ((hfsts1.fields.spi_protection_mode == 0) &&
+ (hfsts6.fields.fpf_soc_lock == 1)) ? "NO" : "YES");
+ /*
+ * The SPI Protection Mode bit reflects SPI descriptor
+ * locked(0) or unlocked(1).
+ */
+ printk(BIOS_DEBUG, "ME: SPI Protection Mode Enabled : %s\n",
+ hfsts1.fields.spi_protection_mode ? "NO" : "YES");
+ printk(BIOS_DEBUG, "ME: FW Partition Table : %s\n",
+ hfsts1.fields.fpt_bad ? "BAD" : "OK");
+ printk(BIOS_DEBUG, "ME: Bringup Loader Failure : %s\n",
+ hfsts1.fields.ft_bup_ld_flr ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: Firmware Init Complete : %s\n",
+ hfsts1.fields.fw_init_complete ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: Boot Options Present : %s\n",
+ hfsts1.fields.boot_options_present ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: Update In Progress : %s\n",
+ hfsts1.fields.update_in_progress ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: D0i3 Support : %s\n",
+ hfsts1.fields.d0i3_support_valid ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: Low Power State Enabled : %s\n",
+ hfsts2.fields.low_power_state ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: CPU Replaced : %s\n",
+ hfsts2.fields.cpu_replaced ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: CPU Replacement Valid : %s\n",
+ hfsts2.fields.cpu_replaced_valid ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: Current Working State : %u\n",
+ hfsts1.fields.working_state);
+ printk(BIOS_DEBUG, "ME: Current Operation State : %u\n",
+ hfsts1.fields.operation_state);
+ printk(BIOS_DEBUG, "ME: Current Operation Mode : %u\n",
+ hfsts1.fields.operation_mode);
+ printk(BIOS_DEBUG, "ME: Error Code : %u\n",
+ hfsts1.fields.error_code);
+ printk(BIOS_DEBUG, "ME: Enhanced Debug Mode : %s\n",
+ hfsts1.fields.invoke_enhance_dbg_mode ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: CPU Debug Disabled : %s\n",
+ hfsts6.fields.cpu_debug_disable ? "YES" : "NO");
+ printk(BIOS_DEBUG, "ME: TXT Support : %s\n",
+ hfsts6.fields.txt_support ? "YES" : "NO");
+}
+
+BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_EXIT, print_me_fw_version, NULL);
+BOOT_STATE_INIT_ENTRY(BS_OS_RESUME_CHECK, BS_ON_EXIT, dump_me_status, NULL);
diff --git a/src/soc/intel/alderlake/pmc.c b/src/soc/intel/alderlake/pmc.c
new file mode 100644
index 0000000..e4c1009
--- /dev/null
+++ b/src/soc/intel/alderlake/pmc.c
@@ -0,0 +1,153 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * This file is created based on Intel Alder Lake Processor PCH Datasheet
+ * Document number: 621483
+ * Chapter number: 4
+ */
+
+#include <acpi/acpigen.h>
+#include <console/console.h>
+#include <device/mmio.h>
+#include <device/device.h>
+#include <drivers/intel/pmc_mux/chip.h>
+#include <intelblocks/pmc.h>
+#include <intelblocks/pmclib.h>
+#include <intelblocks/rtc.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/soc_chip.h>
+#include <stdint.h>
+
+#define PMC_HID "INTC1026"
+
+enum pch_pmc_xtal pmc_get_xtal_freq(void)
+{
+ uint8_t *const pmcbase = pmc_mmio_regs();
+
+ return PCH_EPOC_XTAL_FREQ(read32(pmcbase + PCH_PMC_EPOC));
+}
+
+static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
+{
+ uint32_t reg;
+ uint8_t *pmcbase = pmc_mmio_regs();
+
+ printk(BIOS_DEBUG, "%sabling Deep S%c\n",
+ enable ? "En" : "Dis", sx + '0');
+ reg = read32(pmcbase + offset);
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ write32(pmcbase + offset, reg);
+}
+
+static void config_deep_s5(int on_ac, int on_dc)
+{
+ /* Treat S4 the same as S5. */
+ config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac);
+ config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc);
+ config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac);
+ config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc);
+}
+
+static void config_deep_s3(int on_ac, int on_dc)
+{
+ config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac);
+ config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc);
+}
+
+static void config_deep_sx(uint32_t deepsx_config)
+{
+ uint32_t reg;
+ uint8_t *pmcbase = pmc_mmio_regs();
+
+ reg = read32(pmcbase + DSX_CFG);
+ reg &= ~DSX_CFG_MASK;
+ reg |= deepsx_config;
+ write32(pmcbase + DSX_CFG, reg);
+}
+
+static void pmc_init(struct device *dev)
+{
+ const config_t *config = config_of_soc();
+
+ rtc_init();
+
+ pmc_set_power_failure_state(true);
+ pmc_gpe_init();
+
+ config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc);
+ config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc);
+ config_deep_sx(config->deep_sx_config);
+}
+
+static void soc_pmc_read_resources(struct device *dev)
+{
+ struct resource *res;
+
+ /* Add the fixed MMIO resource */
+ mmio_resource(dev, 0, PCH_PWRM_BASE_ADDRESS / KiB, PCH_PWRM_BASE_SIZE / KiB);
+
+ /* Add the fixed I/O resource */
+ res = new_resource(dev, 1);
+ res->base = (resource_t)ACPI_BASE_ADDRESS;
+ res->size = (resource_t)ACPI_BASE_SIZE;
+ res->limit = res->base + res->size - 1;
+ res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+}
+
+static void soc_pmc_fill_ssdt(const struct device *dev)
+{
+ const char *scope = acpi_device_scope(dev);
+ const char *name = acpi_device_name(dev);
+ if (!scope || !name)
+ return;
+
+ acpigen_write_scope(scope);
+ acpigen_write_device(name);
+
+ acpigen_write_name_string("_HID", PMC_HID);
+ acpigen_write_name_string("_DDN", "Intel(R) Alder Lake IPC Controller");
+
+ /*
+ * Part of the PCH's reserved 32 MB MMIO range (0xFC800000 - 0xFE7FFFFF).
+ * The PMC gets 0xFE000000 - 0xFE00FFFF.
+ */
+ acpigen_write_name("_CRS");
+ acpigen_write_resourcetemplate_header();
+ acpigen_write_mem32fixed(1, PCH_PWRM_BASE_ADDRESS, PCH_PWRM_BASE_SIZE);
+ acpigen_write_resourcetemplate_footer();
+
+ acpigen_pop_len(); /* PMC Device */
+ acpigen_pop_len(); /* Scope */
+
+ printk(BIOS_INFO, "%s: %s at %s\n", acpi_device_path(dev), dev->chip_ops->name,
+ dev_path(dev));
+}
+
+static void soc_acpi_mode_init(struct device *dev)
+{
+ /*
+ * pmc_set_acpi_mode() should be delayed until BS_DEV_INIT in order
+ * to ensure the ordering does not break the assumptions that other
+ * drivers make about ACPI mode (e.g. Chrome EC). Since it disables
+ * ACPI mode, other drivers may take different actions based on this
+ * (e.g. Chrome EC will flush any pending hostevent bits). Because
+ * TGL has its PMC device available for device_operations, it can be
+ * done from the "ops->init" callback.
+ */
+ pmc_set_acpi_mode();
+}
+
+struct device_operations pmc_ops = {
+ .read_resources = soc_pmc_read_resources,
+ .set_resources = noop_set_resources,
+ .init = soc_acpi_mode_init,
+ .enable = pmc_init,
+#if CONFIG(HAVE_ACPI_TABLES)
+ .acpi_fill_ssdt = soc_pmc_fill_ssdt,
+#endif
+ .scan_bus = scan_static_bus,
+};
diff --git a/src/soc/intel/alderlake/pmutil.c b/src/soc/intel/alderlake/pmutil.c
new file mode 100644
index 0000000..79088dd
--- /dev/null
+++ b/src/soc/intel/alderlake/pmutil.c
@@ -0,0 +1,292 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * Helper functions for dealing with power management registers
+ * and the differences between PCH variants.
+ */
+
+/*
+ * This file is created based on Intel Alder Lake Processor PCH Datasheet
+ * Document number: 621483
+ * Chapter number: 4
+ */
+
+#define __SIMPLE_DEVICE__
+
+#include <device/mmio.h>
+#include <cbmem.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_def.h>
+#include <console/console.h>
+#include <intelblocks/pmclib.h>
+#include <intelblocks/rtc.h>
+#include <intelblocks/tco.h>
+#include <security/vboot/vbnv.h>
+#include <soc/espi.h>
+#include <soc/gpe.h>
+#include <soc/gpio.h>
+#include <soc/iomap.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/smbus.h>
+#include <soc/soc_chip.h>
+#include <types.h>
+
+/*
+ * SMI
+ */
+
+const char *const *soc_smi_sts_array(size_t *a)
+{
+ static const char *const smi_sts_bits[] = {
+ [BIOS_STS_BIT] = "BIOS",
+ [LEGACY_USB_STS_BIT] = "LEGACY_USB",
+ [SMI_ON_SLP_EN_STS_BIT] = "SLP_SMI",
+ [APM_STS_BIT] = "APM",
+ [SWSMI_TMR_STS_BIT] = "SWSMI_TMR",
+ [PM1_STS_BIT] = "PM1",
+ [GPE0_STS_BIT] = "GPE0",
+ [GPIO_STS_BIT] = "GPI",
+ [MCSMI_STS_BIT] = "MCSMI",
+ [DEVMON_STS_BIT] = "DEVMON",
+ [TCO_STS_BIT] = "TCO",
+ [PERIODIC_STS_BIT] = "PERIODIC",
+ [SERIRQ_SMI_STS_BIT] = "SERIRQ_SMI",
+ [SMBUS_SMI_STS_BIT] = "SMBUS_SMI",
+ [PCI_EXP_SMI_STS_BIT] = "PCI_EXP_SMI",
+ [MONITOR_STS_BIT] = "MONITOR",
+ [SPI_SMI_STS_BIT] = "SPI",
+ [GPIO_UNLOCK_SMI_STS_BIT] = "GPIO_UNLOCK",
+ [ESPI_SMI_STS_BIT] = "ESPI_SMI",
+ };
+
+ *a = ARRAY_SIZE(smi_sts_bits);
+ return smi_sts_bits;
+}
+
+/*
+ * TCO
+ */
+
+const char *const *soc_tco_sts_array(size_t *a)
+{
+ static const char *const tco_sts_bits[] = {
+ [0] = "NMI2SMI",
+ [1] = "SW_TCO",
+ [2] = "TCO_INT",
+ [3] = "TIMEOUT",
+ [7] = "NEWCENTURY",
+ [8] = "BIOSWR",
+ [9] = "DMISCI",
+ [10] = "DMISMI",
+ [12] = "DMISERR",
+ [13] = "SLVSEL",
+ [16] = "INTRD_DET",
+ [17] = "SECOND_TO",
+ [18] = "BOOT",
+ [20] = "SMLINK_SLV"
+ };
+
+ *a = ARRAY_SIZE(tco_sts_bits);
+ return tco_sts_bits;
+}
+
+/*
+ * GPE0
+ */
+
+const char *const *soc_std_gpe_sts_array(size_t *a)
+{
+ static const char *const gpe_sts_bits[] = {
+ [1] = "HOTPLUG",
+ [2] = "SWGPE",
+ [6] = "TCO_SCI",
+ [7] = "SMB_WAK",
+ [9] = "PCI_EXP",
+ [10] = "BATLOW",
+ [11] = "PME",
+ [12] = "ME",
+ [13] = "PME_B0",
+ [14] = "eSPI",
+ [15] = "GPIO Tier-2",
+ [16] = "LAN_WAKE",
+ [18] = "WADT"
+ };
+
+ *a = ARRAY_SIZE(gpe_sts_bits);
+ return gpe_sts_bits;
+}
+
+void pmc_set_disb(void)
+{
+ /* Set the DISB after DRAM init */
+ uint8_t disb_val;
+ /* Only care about bits [23:16] of register GEN_PMCON_A */
+ uint8_t *addr = (uint8_t *)(pmc_mmio_regs() + GEN_PMCON_A + 2);
+
+ disb_val = read8(addr);
+ disb_val |= (DISB >> 16);
+
+ /* Don't clear bits that are write-1-to-clear */
+ disb_val &= ~((MS4V | SUS_PWR_FLR) >> 16);
+ write8(addr, disb_val);
+}
+
+void pmc_clear_pmcon_sts(void)
+{
+ uint32_t reg_val;
+ uint8_t *addr;
+ addr = pmc_mmio_regs();
+
+ reg_val = read32(addr + GEN_PMCON_A);
+ /* Clear SUS_PWR_FLR, GBL_RST_STS, HOST_RST_STS, PWR_FLR bits
+ * while retaining MS4V write-1-to-clear bit */
+ reg_val &= ~(MS4V);
+
+ write32((addr + GEN_PMCON_A), reg_val);
+}
+
+/*
+ * PMC controller gets hidden from PCI bus
+ * during FSP-Silicon init call. Hence PWRMBASE
+ * can't be accessible using PCI configuration space
+ * read/write.
+ */
+uint8_t *pmc_mmio_regs(void)
+{
+ return (void *)(uintptr_t)PCH_PWRM_BASE_ADDRESS;
+}
+
+uintptr_t soc_read_pmc_base(void)
+{
+ return (uintptr_t)pmc_mmio_regs();
+}
+
+uint32_t *soc_pmc_etr_addr(void)
+{
+ return (uint32_t *)(soc_read_pmc_base() + ETR);
+}
+
+void soc_get_gpi_gpe_configs(uint8_t *dw0, uint8_t *dw1, uint8_t *dw2)
+{
+ DEVTREE_CONST struct soc_intel_alderlake_config *config;
+
+ config = config_of_soc();
+
+ /* Assign to out variable */
+ *dw0 = config->pmc_gpe0_dw0;
+ *dw1 = config->pmc_gpe0_dw1;
+ *dw2 = config->pmc_gpe0_dw2;
+}
+
+static int rtc_failed(uint32_t gen_pmcon_b)
+{
+ return !!(gen_pmcon_b & RTC_BATTERY_DEAD);
+}
+
+int soc_get_rtc_failed(void)
+{
+ const struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE);
+
+ if (!ps) {
+ printk(BIOS_ERR, "Could not find power state in cbmem, RTC init aborted\n");
+ return 1;
+ }
+
+ return rtc_failed(ps->gen_pmcon_b);
+}
+
+int vbnv_cmos_failed(void)
+{
+ return rtc_failed(read32(pmc_mmio_regs() + GEN_PMCON_B));
+}
+
+static inline int deep_s3_enabled(void)
+{
+ uint32_t deep_s3_pol;
+
+ deep_s3_pol = read32(pmc_mmio_regs() + S3_PWRGATE_POL);
+ return !!(deep_s3_pol & (S3DC_GATE_SUS | S3AC_GATE_SUS));
+}
+
+/* Return 0, 3, or 5 to indicate the previous sleep state. */
+int soc_prev_sleep_state(const struct chipset_power_state *ps,
+ int prev_sleep_state)
+{
+
+ /*
+ * Check for any power failure to determine if this a wake from
+ * S5 because the PCH does not set the WAK_STS bit when waking
+ * from a true G3 state.
+ */
+ if (ps->gen_pmcon_a & (PWR_FLR | SUS_PWR_FLR))
+ prev_sleep_state = ACPI_S5;
+
+ /*
+ * If waking from S3 determine if deep S3 is enabled. If not,
+ * need to check both deep sleep well and normal suspend well.
+ * Otherwise just check deep sleep well.
+ */
+ if (prev_sleep_state == ACPI_S3) {
+ /* PWR_FLR represents deep sleep power well loss. */
+ uint32_t mask = PWR_FLR;
+
+ /* If deep s3 isn't enabled check the suspend well too. */
+ if (!deep_s3_enabled())
+ mask |= SUS_PWR_FLR;
+
+ if (ps->gen_pmcon_a & mask)
+ prev_sleep_state = ACPI_S5;
+ }
+
+ return prev_sleep_state;
+}
+
+void soc_fill_power_state(struct chipset_power_state *ps)
+{
+ uint8_t *pmc;
+
+ ps->tco1_sts = tco_read_reg(TCO1_STS);
+ ps->tco2_sts = tco_read_reg(TCO2_STS);
+
+ printk(BIOS_DEBUG, "TCO_STS: %04x %04x\n", ps->tco1_sts, ps->tco2_sts);
+
+ pmc = pmc_mmio_regs();
+ ps->gen_pmcon_a = read32(pmc + GEN_PMCON_A);
+ ps->gen_pmcon_b = read32(pmc + GEN_PMCON_B);
+ ps->gblrst_cause[0] = read32(pmc + GBLRST_CAUSE0);
+ ps->gblrst_cause[1] = read32(pmc + GBLRST_CAUSE1);
+ ps->hpr_cause0 = read32(pmc + HPR_CAUSE0);
+
+ printk(BIOS_DEBUG, "GEN_PMCON: %08x %08x\n",
+ ps->gen_pmcon_a, ps->gen_pmcon_b);
+
+ printk(BIOS_DEBUG, "GBLRST_CAUSE: %08x %08x\n",
+ ps->gblrst_cause[0], ps->gblrst_cause[1]);
+
+ printk(BIOS_DEBUG, "HPR_CAUSE0: %08x\n", ps->hpr_cause0);
+}
+
+/* STM Support */
+uint16_t get_pmbase(void)
+{
+ return (uint16_t) ACPI_BASE_ADDRESS;
+}
+
+/*
+ * Set which power state system will be after reapplying
+ * the power (from G3 State)
+ */
+void pmc_soc_set_afterg3_en(const bool on)
+{
+ uint8_t reg8;
+ uint8_t *const pmcbase = pmc_mmio_regs();
+
+ reg8 = read8(pmcbase + GEN_PMCON_A);
+ if (on)
+ reg8 &= ~SLEEP_AFTER_POWER_FAIL;
+ else
+ reg8 |= SLEEP_AFTER_POWER_FAIL;
+ write8(pmcbase + GEN_PMCON_A, reg8);
+}
diff --git a/src/soc/intel/alderlake/romstage/fsp_params.c b/src/soc/intel/alderlake/romstage/fsp_params.c
index 83c84ac..80420f0 100644
--- a/src/soc/intel/alderlake/romstage/fsp_params.c
+++ b/src/soc/intel/alderlake/romstage/fsp_params.c
@@ -16,7 +16,7 @@
#include <string.h>
static void soc_memory_init_params(FSP_M_CONFIG *m_cfg,
- const struct soc_intel_alderlake_dev_config *config)
+ const struct soc_intel_alderlake_config *config)
{
unsigned int i;
uint32_t mask = 0;
@@ -159,7 +159,7 @@
void platform_fsp_memory_init_params_cb(FSPM_UPD *mupd, uint32_t version)
{
- const struct soc_intel_alderlake_dev_config *config;
+ const struct soc_intel_alderlake_config *config;
FSP_M_CONFIG *m_cfg = &mupd->FspmConfig;
config = config_of_soc();
diff --git a/src/soc/intel/alderlake/smihandler.c b/src/soc/intel/alderlake/smihandler.c
new file mode 100644
index 0000000..a072138
--- /dev/null
+++ b/src/soc/intel/alderlake/smihandler.c
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/pci_def.h>
+#include <intelblocks/cse.h>
+#include <intelblocks/smihandler.h>
+#include <soc/soc_chip.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+
+/*
+ * Specific SOC SMI handler during ramstage finalize phase
+ *
+ * BIOS can't make CSME function disable as is due to POSTBOOT_SAI
+ * restriction in place from ADP chipset. Hence create SMI Handler to
+ * perform CSME function disabling logic during SMM mode.
+ */
+void smihandler_soc_at_finalize(void)
+{
+ const struct soc_intel_alderlake_config *config;
+
+ config = config_of_soc();
+
+ if (!config->HeciEnabled && CONFIG(HECI_DISABLE_USING_SMM))
+ heci_disable();
+}
+
+const smi_handler_t southbridge_smi[SMI_STS_BITS] = {
+ [SMI_ON_SLP_EN_STS_BIT] = smihandler_southbridge_sleep,
+ [APM_STS_BIT] = smihandler_southbridge_apmc,
+ [PM1_STS_BIT] = smihandler_southbridge_pm1,
+ [GPE0_STS_BIT] = smihandler_southbridge_gpe0,
+ [GPIO_STS_BIT] = smihandler_southbridge_gpi,
+ [ESPI_SMI_STS_BIT] = smihandler_southbridge_espi,
+ [MCSMI_STS_BIT] = smihandler_southbridge_mc,
+#if CONFIG(SOC_INTEL_COMMON_BLOCK_SMM_TCO_ENABLE)
+ [TCO_STS_BIT] = smihandler_southbridge_tco,
+#endif
+ [PERIODIC_STS_BIT] = smihandler_southbridge_periodic,
+ [MONITOR_STS_BIT] = smihandler_southbridge_monitor,
+};
diff --git a/src/soc/intel/alderlake/smmrelocate.c b/src/soc/intel/alderlake/smmrelocate.c
new file mode 100644
index 0000000..17b4f2d
--- /dev/null
+++ b/src/soc/intel/alderlake/smmrelocate.c
@@ -0,0 +1,251 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <cpu/intel/common/common.h>
+#include <cpu/intel/em64t101_save_state.h>
+#include <cpu/intel/smm_reloc.h>
+#include <cpu/x86/mp.h>
+#include <cpu/x86/msr.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/x86/smm.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <smp/node.h>
+#include <soc/cpu.h>
+#include <soc/msr.h>
+#include <soc/pci_devs.h>
+#include <soc/soc_chip.h>
+#include <string.h>
+#include <types.h>
+
+static void update_save_state(int cpu, uintptr_t curr_smbase,
+ uintptr_t staggered_smbase,
+ struct smm_relocation_params *relo_params)
+{
+ u32 smbase;
+ u32 iedbase;
+
+ /*
+ * The relocated handler runs with all CPUs concurrently. Therefore
+ * stagger the entry points adjusting SMBASE downwards by save state
+ * size * CPU num.
+ */
+ smbase = staggered_smbase;
+ iedbase = relo_params->ied_base;
+
+ printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n",
+ smbase, iedbase);
+
+ /*
+ * All threads need to set IEDBASE and SMBASE to the relocated
+ * handler region. However, the save state location depends on the
+ * smm_save_state_in_msrs field in the relocation parameters. If
+ * smm_save_state_in_msrs is non-zero then the CPUs are relocating
+ * the SMM handler in parallel, and each CPUs save state area is
+ * located in their respective MSR space. If smm_save_state_in_msrs
+ * is zero then the SMM relocation is happening serially so the
+ * save state is at the same default location for all CPUs.
+ */
+ if (relo_params->smm_save_state_in_msrs) {
+ msr_t smbase_msr;
+ msr_t iedbase_msr;
+
+ smbase_msr.lo = smbase;
+ smbase_msr.hi = 0;
+
+ /*
+ * According the BWG the IEDBASE MSR is in bits 63:32. It's
+ * not clear why it differs from the SMBASE MSR.
+ */
+ iedbase_msr.lo = 0;
+ iedbase_msr.hi = iedbase;
+
+ wrmsr(SMBASE_MSR, smbase_msr);
+ wrmsr(IEDBASE_MSR, iedbase_msr);
+ } else {
+ em64t101_smm_state_save_area_t *save_state;
+
+ save_state = (void *)(curr_smbase + SMM_DEFAULT_SIZE -
+ sizeof(*save_state));
+
+ save_state->smbase = smbase;
+ save_state->iedbase = iedbase;
+ }
+}
+
+/* Returns 1 if SMM MSR save state was set. */
+static int bsp_setup_msr_save_state(struct smm_relocation_params *relo_params)
+{
+ msr_t smm_mca_cap;
+
+ smm_mca_cap = rdmsr(SMM_MCA_CAP_MSR);
+ if (smm_mca_cap.hi & SMM_CPU_SVRSTR_MASK) {
+ msr_t smm_feature_control;
+
+ smm_feature_control = rdmsr(SMM_FEATURE_CONTROL_MSR);
+ smm_feature_control.hi = 0;
+ smm_feature_control.lo |= SMM_CPU_SAVE_EN;
+ wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control);
+ relo_params->smm_save_state_in_msrs = 1;
+ }
+ return relo_params->smm_save_state_in_msrs;
+}
+
+/*
+ * The relocation work is actually performed in SMM context, but the code
+ * resides in the ramstage module. This occurs by trampolining from the default
+ * SMRAM entry point to here.
+ */
+void smm_relocation_handler(int cpu, uintptr_t curr_smbase,
+ uintptr_t staggered_smbase)
+{
+ msr_t mtrr_cap;
+ struct smm_relocation_params *relo_params = &smm_reloc_params;
+
+ printk(BIOS_DEBUG, "In relocation handler: CPU %d\n", cpu);
+
+ /*
+ * Determine if the processor supports saving state in MSRs. If so,
+ * enable it before the non-BSPs run so that SMM relocation can occur
+ * in parallel in the non-BSP CPUs.
+ */
+ if (cpu == 0) {
+ /*
+ * If smm_save_state_in_msrs is 1 then that means this is the
+ * 2nd time through the relocation handler for the BSP.
+ * Parallel SMM handler relocation is taking place. However,
+ * it is desired to access other CPUs save state in the real
+ * SMM handler. Therefore, disable the SMM save state in MSRs
+ * feature.
+ */
+ if (relo_params->smm_save_state_in_msrs) {
+ msr_t smm_feature_control;
+
+ smm_feature_control = rdmsr(SMM_FEATURE_CONTROL_MSR);
+ smm_feature_control.lo &= ~SMM_CPU_SAVE_EN;
+ wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control);
+ } else if (bsp_setup_msr_save_state(relo_params))
+ /*
+ * Just return from relocation handler if MSR save
+ * state is enabled. In that case the BSP will come
+ * back into the relocation handler to setup the new
+ * SMBASE as well disabling SMM save state in MSRs.
+ */
+ return;
+ }
+
+ /* Make appropriate changes to the save state map. */
+ update_save_state(cpu, curr_smbase, staggered_smbase, relo_params);
+
+ /*
+ * The SMRR MSRs are core-level registers, so if two threads that share
+ * a core try to both set the lock bit (in the same physical register),
+ * a #GP will be raised on the second write to that register (which is
+ * exactly what the lock is supposed to do), therefore secondary threads
+ * should exit here.
+ */
+ if (intel_ht_sibling())
+ return;
+
+ /* Write SMRR MSRs based on indicated support. */
+ mtrr_cap = rdmsr(MTRR_CAP_MSR);
+
+ /* Set Lock bit if supported */
+ if (mtrr_cap.lo & SMRR_LOCK_SUPPORTED)
+ relo_params->smrr_mask.lo |= SMRR_PHYS_MASK_LOCK;
+
+ /* Write SMRRs if supported */
+ if (mtrr_cap.lo & SMRR_SUPPORTED)
+ write_smrr(relo_params);
+}
+
+static void fill_in_relocation_params(struct smm_relocation_params *params)
+{
+ uintptr_t tseg_base;
+ size_t tseg_size;
+ /* All range registers are aligned to 4KiB */
+ const u32 rmask = ~(4 * KiB - 1);
+
+ smm_region(&tseg_base, &tseg_size);
+
+ if (!IS_ALIGNED(tseg_base, tseg_size)) {
+ printk(BIOS_WARNING,
+ "TSEG base not aligned with TSEG SIZE! Not setting SMRR\n");
+ return;
+ }
+
+ smm_subregion(SMM_SUBREGION_CHIPSET, ¶ms->ied_base, ¶ms->ied_size);
+
+ /* SMRR has 32-bits of valid address aligned to 4KiB. */
+ params->smrr_base.lo = (tseg_base & rmask) | MTRR_TYPE_WRBACK;
+ params->smrr_base.hi = 0;
+ params->smrr_mask.lo = (~(tseg_size - 1) & rmask) | MTRR_PHYS_MASK_VALID;
+ params->smrr_mask.hi = 0;
+}
+
+static void setup_ied_area(struct smm_relocation_params *params)
+{
+ char *ied_base;
+
+ struct ied_header ied = {
+ .signature = "INTEL RSVD",
+ .size = params->ied_size,
+ .reserved = {0},
+ };
+
+ ied_base = (void *)params->ied_base;
+
+ printk(BIOS_DEBUG, "IED base = 0x%08x\n", (u32)params->ied_base);
+ printk(BIOS_DEBUG, "IED size = 0x%08x\n", (u32)params->ied_size);
+
+ /* Place IED header at IEDBASE. */
+ memcpy(ied_base, &ied, sizeof(ied));
+
+ /* Zero out 32KiB at IEDBASE + 1MiB */
+ memset(ied_base + 1 * MiB, 0, 32 * KiB);
+}
+
+void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
+ size_t *smm_save_state_size)
+{
+ printk(BIOS_DEBUG, "Setting up SMI for CPU\n");
+
+ fill_in_relocation_params(&smm_reloc_params);
+
+ smm_subregion(SMM_SUBREGION_HANDLER, perm_smbase, perm_smsize);
+
+ if (smm_reloc_params.ied_size)
+ setup_ied_area(&smm_reloc_params);
+
+ *smm_save_state_size = sizeof(em64t101_smm_state_save_area_t);
+}
+
+void smm_initialize(void)
+{
+ /* Clear the SMM state in the southbridge. */
+ smm_southbridge_clear_state();
+
+ /*
+ * Run the relocation handler for on the BSP to check and set up
+ * parallel SMM relocation.
+ */
+ smm_initiate_relocation();
+
+ if (smm_reloc_params.smm_save_state_in_msrs)
+ printk(BIOS_DEBUG, "Doing parallel SMM relocation.\n");
+}
+
+void smm_relocate(void)
+{
+ /*
+ * If smm_save_state_in_msrs is non-zero then parallel SMM relocation
+ * shall take place. Run the relocation handler a second time on the
+ * BSP to do * the final move. For APs, a relocation handler always
+ * needs to be run.
+ */
+ if (smm_reloc_params.smm_save_state_in_msrs)
+ smm_initiate_relocation_parallel();
+ else if (!boot_cpu())
+ smm_initiate_relocation();
+}
diff --git a/src/soc/intel/alderlake/soundwire.c b/src/soc/intel/alderlake/soundwire.c
new file mode 100644
index 0000000..38a2c37
--- /dev/null
+++ b/src/soc/intel/alderlake/soundwire.c
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpi_soundwire.h>
+#include <console/console.h>
+#include <device/mmio.h>
+#include <device/soundwire.h>
+#include <drivers/intel/soundwire/soundwire.h>
+#include <intelblocks/pmclib.h>
+#include <soc/pmc.h>
+#include <stddef.h>
+#include <string.h>
+
+static const struct soundwire_link link_xtal_38_4 = {
+ .clock_stop_mode0_supported = 1,
+ .clock_stop_mode1_supported = 1,
+ .clock_frequencies_supported_count = 1,
+ .clock_frequencies_supported = { 4800 * KHz },
+ .default_frame_rate = 48 * KHz,
+ .default_frame_row_size = 50,
+ .default_frame_col_size = 4,
+ .dynamic_frame_shape = 1,
+ .command_error_threshold = 16,
+};
+
+static const struct soundwire_link link_xtal_24 = {
+ .clock_stop_mode0_supported = 1,
+ .clock_stop_mode1_supported = 1,
+ .clock_frequencies_supported_count = 1,
+ .clock_frequencies_supported = { 6 * MHz },
+ .default_frame_rate = 48 * KHz,
+ .default_frame_row_size = 125,
+ .default_frame_col_size = 2,
+ .dynamic_frame_shape = 1,
+ .command_error_threshold = 16,
+};
+
+static struct intel_soundwire_controller intel_controller = {
+ .acpi_address = 0x40000000,
+ .sdw = {
+ /* TODO: Verified Audio in nocodec mode, add codec support */
+ .master_list_count = 0
+ }
+};
+
+int soc_fill_soundwire_controller(struct intel_soundwire_controller **controller)
+{
+ const struct soundwire_link *link;
+ enum pch_pmc_xtal xtal = pmc_get_xtal_freq();
+ size_t i;
+
+ /* Select link config based on XTAL frequency and set IP clock. */
+ switch (xtal) {
+ case XTAL_24_MHZ:
+ link = &link_xtal_24;
+ intel_controller.ip_clock = 24 * MHz;
+ break;
+ case XTAL_38_4_MHZ:
+ link = &link_xtal_38_4;
+ intel_controller.ip_clock = 38400 * KHz;
+ break;
+ case XTAL_19_2_MHZ:
+ default:
+ printk(BIOS_ERR, "%s: XTAL not supported: 0x%x\n", __func__, xtal);
+ return -1;
+ }
+
+ /* Fill link config in controller map based on selected XTAL. */
+ for (i = 0; i < intel_controller.sdw.master_list_count; i++)
+ memcpy(&intel_controller.sdw.master_list[i], link, sizeof(*link));
+
+ *controller = &intel_controller;
+ return 0;
+}
diff --git a/src/soc/intel/alderlake/spi.c b/src/soc/intel/alderlake/spi.c
new file mode 100644
index 0000000..2940de1
--- /dev/null
+++ b/src/soc/intel/alderlake/spi.c
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * This file is created based on Intel Alder Lake Processor PCH Datasheet
+ * Document number: 621483
+ * Chapter number: 7
+ */
+
+#include <intelblocks/spi.h>
+#include <soc/pci_devs.h>
+
+int spi_soc_devfn_to_bus(unsigned int devfn)
+{
+ switch (devfn) {
+ case PCH_DEVFN_SPI:
+ return 0;
+ case PCH_DEVFN_GSPI0:
+ return 1;
+ case PCH_DEVFN_GSPI1:
+ return 2;
+ case PCH_DEVFN_GSPI2:
+ return 3;
+ case PCH_DEVFN_GSPI3:
+ return 4;
+ }
+ return -1;
+}
diff --git a/src/soc/intel/alderlake/systemagent.c b/src/soc/intel/alderlake/systemagent.c
new file mode 100644
index 0000000..3e7a404
--- /dev/null
+++ b/src/soc/intel/alderlake/systemagent.c
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * This file is created based on Intel Alder Lake Processor SA Datasheet
+ * Document number: 619503
+ * Chapter number: 3
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <intelblocks/systemagent.h>
+#include <soc/iomap.h>
+#include <soc/systemagent.h>
+
+/*
+ * SoC implementation
+ *
+ * Add all known fixed memory ranges for Host Controller/Memory
+ * controller.
+ */
+void soc_add_fixed_mmio_resources(struct device *dev, int *index)
+{
+ static const struct sa_mmio_descriptor soc_fixed_resources[] = {
+ { PCIEXBAR, CONFIG_MMCONF_BASE_ADDRESS, CONFIG_SA_PCIEX_LENGTH,
+ "PCIEXBAR" },
+ { MCHBAR, MCH_BASE_ADDRESS, MCH_BASE_SIZE, "MCHBAR" },
+ { DMIBAR, DMI_BASE_ADDRESS, DMI_BASE_SIZE, "DMIBAR" },
+ { EPBAR, EP_BASE_ADDRESS, EP_BASE_SIZE, "EPBAR" },
+ { REGBAR, REG_BASE_ADDRESS, REG_BASE_SIZE, "REGBAR" },
+ { EDRAMBAR, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE, "EDRAMBAR" },
+ };
+
+ sa_add_fixed_mmio_resources(dev, index, soc_fixed_resources,
+ ARRAY_SIZE(soc_fixed_resources));
+
+ /* Add Vt-d resources if VT-d is enabled */
+ if ((pci_read_config32(dev, CAPID0_A) & VTD_DISABLE))
+ return;
+
+ sa_add_fixed_mmio_resources(dev, index, soc_vtd_resources,
+ ARRAY_SIZE(soc_vtd_resources));
+}
+
+/*
+ * SoC implementation
+ *
+ * Perform System Agent Initialization during Ramstage phase.
+ */
+void soc_systemagent_init(struct device *dev)
+{
+ /* Enable Power Aware Interrupt Routing */
+ enable_power_aware_intr();
+
+ /* Enable BIOS Reset CPL */
+ enable_bios_reset_cpl();
+ /* TODO: Add set_power_limits() */
+}
+
+uint32_t soc_systemagent_max_chan_capacity_mib(u8 capid0_a_ddrsz)
+{
+ switch (capid0_a_ddrsz) {
+ case 1:
+ return 8192;
+ case 2:
+ return 4096;
+ case 3:
+ return 2048;
+ default:
+ return 65536;
+ }
+}
diff --git a/src/soc/intel/alderlake/uart.c b/src/soc/intel/alderlake/uart.c
new file mode 100644
index 0000000..cdbf8ec
--- /dev/null
+++ b/src/soc/intel/alderlake/uart.c
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * This file is created based on Intel Alder Lake Processor PCH Datasheet
+ * Document number: 621483
+ * Chapter number: 9
+ */
+
+#include <console/console.h>
+#include <device/pci_def.h>
+#include <intelblocks/gpio.h>
+#include <intelblocks/lpss.h>
+#include <intelblocks/pcr.h>
+#include <intelblocks/uart.h>
+#include <soc/iomap.h>
+#include <soc/pch.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+
+const struct uart_gpio_pad_config uart_gpio_pads[] = {
+ {
+ .console_index = 0,
+ .gpios = {
+ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), /* UART0 RX */
+ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), /* UART0 TX */
+ },
+ },
+ {
+ .console_index = 1,
+ .gpios = {
+ PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), /* UART1 RX */
+ PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1), /* UART1 TX */
+ },
+ },
+ {
+ .console_index = 2,
+ .gpios = {
+ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2 RX */
+ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2 TX */
+ },
+ }
+};
+
+const int uart_max_index = ARRAY_SIZE(uart_gpio_pads);
+
+DEVTREE_CONST struct device *soc_uart_console_to_device(int uart_console)
+{
+ /*
+ * if index is valid, this function will return corresponding structure
+ * for uart console else will return NULL.
+ */
+ switch (uart_console) {
+ case 0:
+ return pcidev_path_on_root(PCH_DEVFN_UART0);
+ case 1:
+ return pcidev_path_on_root(PCH_DEVFN_UART1);
+ case 2:
+ return pcidev_path_on_root(PCH_DEVFN_UART2);
+ default:
+ printk(BIOS_ERR, "Invalid UART console index\n");
+ return NULL;
+ }
+}