src/mainboard/google/guybrush/variants/guybrush/overridetree.cb

# SPDX-License-Identifier: GPL-2.0-or-later
fw_config
	field USB_DB 0 1
		option USB_DB_A1_PS8811_C1_PS8818 0
		option USB_DB_A1_ANX7491_C1_ANX7451 1
	end
	field FORM_FACTOR 2
		option FORM_FACTOR_CLAMSHELL 0
		option FORM_FACTOR_CONVERTIBLE 1
	end
	field KB_BL 3
		option KB_BL_ABSENT 0
		option KB_BL_PRESENT 1
	end
	field FP 4
		option FP_ABSENT 0
		option FP_PRESENT 1
	end
	field WLAN 5 6
		option WLAN_WCN6856 0
		option WLAN_RTL8852 1
	end
	field WWAN 7 8
		option WWAN_DIASABLED 0
		option WWAN_L850GL 1
		option WWAN_FM350GL 2
	end
	field BEEP_MODE 9
		option BEEP_MODE_AMP 0
		option BEEP_MODE_BIT_BANG 1
	end
end

chip soc/amd/cezanne
	device domain 0 on
	end # domain

	register "slow_ppt_limit_mW"         = "25000"
	register "fast_ppt_limit_mW"         = "30000"
	register "slow_ppt_time_constant_s"  = "5"
	register "stapm_time_constant_s"     = "275"
	register "sustained_power_limit_mW"  = "15000"
	register "thermctl_limit_degreeC"    = "100"

	register "telemetry_vddcrvddfull_scale_current_mA" = "92165" #mA
	register "telemetry_vddcrvddoffset" =  "412"
	register "telemetry_vddcrsocfull_scale_current_mA" = "30233" #mA
	register "telemetry_vddcrsocoffset" =  "457"

	# I2C Config
	#+-------------------+---------------------------+
	#| Field             |  Value                    |
	#+-------------------+---------------------------+
	#| I2C0              | Trackpad                  |
	#| I2C1              | Touchscreen               |
	#| I2C2              | Speaker, Codec, P-SAR     |
	#| I2C3              | H1/D2 TPM                 |
	#+-------------------+---------------------------+
	register "i2c[0]" = "{
		.speed = I2C_SPEED_FAST,
	}"

	register "i2c[1]" = "{
		.speed = I2C_SPEED_FAST,
	}"

	register "i2c[2]" = "{
		.speed = I2C_SPEED_FAST,
	}"

	register "i2c[3]" = "{
		.speed = I2C_SPEED_FAST,
		.early_init = true,
	}"

	device ref i2c_0 on
		chip drivers/i2c/generic
			register "hid" = ""ELAN0000""
			register "desc" = ""ELAN Touchpad""
			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
			register "wake" = "GEVENT_22"
			register "probed" = "1"
			device i2c 15 on end
		end
	end # I2C0

	device ref i2c_2 on
		chip drivers/i2c/generic
			register "hid" = ""10EC5682""
			register "name" = ""RT58""
			register "desc" = ""Realtek RT5682""
			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)"
			register "property_count" = "1"
			register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
			register "property_list[0].name" = ""realtek,jd-src""
			register "property_list[0].integer" = "1"
			device i2c 1a on end
		end
		chip drivers/i2c/generic
			register "hid" = ""10EC1019""
			register "desc" = ""Realtek SPK AMP L""
			register "uid" = "0"
			device i2c 28 on end
		end
		chip drivers/i2c/generic
			register "hid" = ""10EC1019""
			register "desc" = ""Realtek SPK AMP R""
			register "uid" = "1"
			device i2c 29 on end
		end
	end # I2C2

	device ref uart_1 on
		chip drivers/uart/acpi
			register "name" = ""CRFP""
			register "desc" = ""Fingerprint Reader""
			register "hid" = "ACPI_DT_NAMESPACE_HID"
			register "compat_string" = ""google,cros-ec-uart""
			register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_21)"
			register "wake" = "GEVENT_5"
			register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)"
			device generic 0 on end
		end
	end

end	# chip soc/amd/cezanne