| chip soc/intel/cannonlake |
| |
| # CPU (soc/intel/cannonlake/cpu.c) |
| # Power limit |
| register "power_limits_config" = "{ |
| .tdp_pl1_override = 15, |
| .tdp_pl2_override = 28, |
| }" |
| |
| # FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c) |
| register "SaGv" = "SaGv_FixedHigh" |
| |
| # FSP Silicon (soc/intel/cannonlake/fsp_params.c) |
| |
| # Thermal |
| register "tcc_offset" = "12" |
| |
| # Serial IRQ Mode |
| register "serirq_mode" = "SERIRQ_CONTINUOUS" |
| |
| # Actual device tree |
| device domain 0 on |
| device pci 14.0 on # USB xHCI |
| chip drivers/usb/acpi |
| device usb 0.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Front Left Upper"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(0, 0)" |
| device usb 2.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Front Left Lower"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(0, 1)" |
| device usb 2.1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Rear Upper"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(1, 0)" |
| device usb 2.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Front Right Lower"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(0, 2)" |
| device usb 2.3 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Front Right Upper"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(0, 3)" |
| device usb 2.4 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-C Port Rear"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device usb 2.5 on end |
| end |
| chip drivers/usb/acpi |
| device usb 2.6 off end |
| end |
| chip drivers/usb/acpi |
| device usb 2.7 off end |
| end |
| chip drivers/usb/acpi |
| device usb 2.8 off end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Rear Lower"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 2.9 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-A Front Left Upper"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(0, 0)" |
| device usb 3.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-A Front Left Lower"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(0, 1)" |
| device usb 3.1 on end |
| end |
| chip drivers/usb/acpi |
| device usb 3.2 off end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-C Rear"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device usb 3.3 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-A Rear Lower"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 3.4 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-A Rear Upper"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(1, 0)" |
| device usb 3.5 on end |
| end |
| end |
| end |
| register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # Type-A front left upper |
| register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # Type-A front left lower |
| register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A rear upper |
| register "usb2_ports[3]" = "USB2_PORT_MID(OC1)" # Type-A front right lower |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC1)" # Type-A front right upper |
| register "usb2_ports[5]" = "USB2_PORT_TYPE_C(OC3)" # Type-C rear |
| register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # m.2-2230/Bluetooth |
| register "usb2_ports[9]" = "USB2_PORT_MID(OC2)" # Type-A rear lower |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-A front left upper |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # Type-A front left lower |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-C rear |
| register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # Type-A rear lower |
| register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC2)" # Type-A rear upper |
| end |
| device pci 17.0 on # SATA |
| register "SataPortsEnable[0]" = "1" # 2.5" |
| register "SataPortsEnable[2]" = "1" # m.2 |
| register "satapwroptimize" = "1" |
| end |
| device pci 1c.7 on # PCI Express Port 8 -- x1 M.2/E 2230 (WLAN) |
| register "PcieRpSlotImplemented[7]" = "1" |
| register "PcieRpEnable[7]" = "1" |
| register "PcieRpLtrEnable[7]" = "1" |
| # ClkSrcUsage must be set to free-run since SRCCLKREQ2 is NC |
| register "PcieClkSrcUsage[2]" = "0x80" |
| smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "M.2/E 2230" "SlotDataBusWidth1X" |
| end |
| device pci 1d.1 on # PCI Express Port 10 |
| device pci 00.0 on end # x1 (LAN) |
| register "PcieRpEnable[9]" = "1" |
| register "PcieClkSrcUsage[3]" = "9" |
| register "PcieClkSrcClkReq[3]" = "3" |
| end |
| device pci 1d.4 on # PCI Express Port 13 -- x4 M.2/M 2280 (NVMe) |
| register "PcieRpSlotImplemented[12]" = "1" |
| register "PcieRpEnable[12]" = "1" |
| register "PcieRpLtrEnable[12]" = "1" |
| register "PcieClkSrcUsage[1]" = "12" |
| register "PcieClkSrcClkReq[1]" = "1" |
| smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280" "SlotDataBusWidth4X" |
| end |
| device pci 1f.0 on # LPC Bridge |
| chip superio/ite/it8528e |
| device pnp 2e.1 on # UART1 |
| io 0x60 = 0x3F8 |
| irq 0x70 = 0x04 |
| end |
| device pnp 2e.2 off end # UART2 |
| device pnp 2e.4 off end # System Wake-Up Control (SWUC) |
| device pnp 2e.5 off end # KBC/Mouse |
| device pnp 2e.6 off end # KBC/Keyboard |
| device pnp 2e.a off end # Consumer IR |
| device pnp 2e.f off end # Shared Memory/Flash Interface (SMFI) |
| device pnp 2e.10 on # RTC-like Timer |
| io 0x62 = 0x360 # BRAM1 I/O base address |
| end |
| device pnp 2e.11 off end # Power Management I/F Channel 1 (PMC1) |
| device pnp 2e.12 off end # Power Management I/F Channel 2 (PMC2) |
| device pnp 2e.13 off end # Serial Peripheral Interface (SSPI) |
| device pnp 2e.14 off end # Platform Environment Control Interface (PECI) |
| device pnp 2e.17 off end # Power Management I/F Channel 3 (PMC3) |
| device pnp 2e.18 off end # Power Management I/F Channel 4 (PMC4) |
| device pnp 2e.19 off end # Power Management I/F Channel 5 (PMC5) |
| end |
| end |
| end |
| end |