src/mainboard/google/hatch/variants/palkia/overridetree.cb

chip soc/intel/cannonlake
	register "power_limits_config" = "{
		.tdp_pl1_override = 15,
		.tdp_pl2_override = 64,
	}"

	register "SerialIoDevMode" = "{
		[PchSerialIoIndexI2C0] = PchSerialIoPci,
		[PchSerialIoIndexI2C1] = PchSerialIoPci,
		[PchSerialIoIndexI2C2] = PchSerialIoPci,
		[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
		[PchSerialIoIndexI2C4] = PchSerialIoPci,
		[PchSerialIoIndexSPI0] = PchSerialIoPci,
		[PchSerialIoIndexSPI2] = PchSerialIoDisabled,
		[PchSerialIoIndexUART0] = PchSerialIoSkipInit,
		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
		[PchSerialIoIndexUART2] = PchSerialIoDisabled,
	}"

	register "usb2_ports[2]" = "USB2_PORT_LONG(OC_SKIP)"    # SD CARD
	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD CARD

	# No PCIe WiFi
	register "PcieRpEnable[13]" = "0"

	# Intel Common SoC Config
	#+-------------------+---------------------------+
	#| Field	     |	Value			 |
	#+-------------------+---------------------------+
	#| I2C0		     | Trackpad			 |
	#| I2C1		     | Touchscreen		 |
	#| I2C2              | 2nd Touchscreen		 |
	#| I2C4		     | Audio			 |
	#+-------------------+---------------------------+
	register "common_soc_config" = "{
		.i2c[0] = {
			.speed = I2C_SPEED_FAST,
			.rise_time_ns = 50,
			.fall_time_ns = 15,
			.data_hold_time_ns = 330,
		},
		.i2c[1] = {
			.speed = I2C_SPEED_FAST,
			.rise_time_ns = 60,
			.fall_time_ns = 25,
		},
		.i2c[2] = {
			.speed = I2C_SPEED_FAST,
			.rise_time_ns = 60,
			.fall_time_ns = 25,
		},
		.i2c[4] = {
			.speed = I2C_SPEED_FAST,
			.rise_time_ns = 120,
			.fall_time_ns = 120,
		},
	}"

	device domain 0 on
		device pci 02.0 on	# Integrated Graphics Device
			register "gfx" = "GMA_DEFAULT_PANEL(0)"
		end
		device pci 14.0 on
			chip drivers/usb/acpi
				device usb 0.0 on
					chip drivers/usb/acpi
						register "desc" = ""Micro SD Card""
						register "type" = "UPC_TYPE_INTERNAL"
						device usb 2.2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""Left Type-A Port""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(1, 2)"
						device usb 2.3 on end
					end
					chip drivers/usb/acpi
						# No WWAN
						device usb 2.5 off end
					end
					chip drivers/usb/acpi
						# No Right Tpype-C port
						device usb 3.1 off end
					end
					chip drivers/usb/acpi
						register "desc" = ""Micro SD card""
						register "type" = "UPC_TYPE_INTERNAL"
						device usb 3.2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""Left Type-A Port 1""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(1, 2)"
						device usb 3.3 on end
					end
				end
			end
		end

		# Native SD Card interface unused
		device pci 14.5 off end

		device pci 15.0 on
			chip drivers/i2c/generic
				register "hid" = ""ELAN0000""
				register "desc" = ""ELAN Touchpad""
				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_A21_IRQ)"
				register "wake" = "GPE0_DW0_21"
				device i2c 15 on end
			end
		end

		device pci 15.1 on
			chip drivers/i2c/hid
				register "generic.hid" = ""ELAN9008""
				register "generic.desc" = ""ELAN Touchscreen USI""
				register "generic.irq" =
					"ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
				register "generic.probed" = "1"
				register "generic.enable_gpio" =
					"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)"
				register "generic.enable_delay_ms" = "12"
				register "generic.enable_off_delay_ms" = "10"
				register "generic.has_power_resource" = "1"
				register "generic.stop_gpio" =
					"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)"
				register "generic.stop_delay_ms" = "15"
				register "generic.stop_off_delay_ms" = "5"
				register "hid_desc_reg_offset" = "0x01"
				device i2c 10 on end
			end
		end # I2C 1

		device pci 15.2 on
			chip drivers/i2c/hid
				register "generic.hid" = ""ELAN9009""
				register "generic.desc" = ""ELAN Touchscreen USI""
				register "generic.irq" =
					"ACPI_IRQ_EDGE_LOW(GPP_C7_IRQ)"
				register "generic.probed" = "1"
				register "generic.enable_gpio" =
					"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D10)"
				register "generic.enable_delay_ms" = "12"
				register "generic.enable_off_delay_ms" = "10"
				register "generic.has_power_resource" = "1"
				register "generic.stop_gpio" =
					"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
				register "generic.stop_delay_ms" = "15"
				register "generic.stop_off_delay_ms" = "5"
				register "hid_desc_reg_offset" = "0x01"
				device i2c 10 on end
			end
		end #I2C 2

		# I2C #3 unused
		device pci 15.3 off end

		device pci 19.0 on
			chip drivers/i2c/generic
				register "hid" = ""10EC5682""
				register "name" = ""RT58""
				register "desc" = ""Realtek RT5682""
				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)"
				register "property_count" = "1"
				# Set the jd_src to RT5668_JD1 for jack detection
				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
				register "property_list[0].name" = ""realtek,jd-src""
				register "property_list[0].integer" = "1"
				device i2c 1a on end
			end
			chip drivers/i2c/generic
				register "hid" = ""10EC1011""
				register "desc" = ""RT1011 Tweeter Left Speaker Amp""
				register "uid" = "0"
				register "name" = ""TL""
				device i2c 38 on end
			end
			chip drivers/i2c/generic
				register "hid" = ""10EC1011""
				register "desc" = ""RT1011 Tweeter Right Speaker Amp""
				register "uid" = "1"
				register "name" = ""TR""
				device i2c 39 on end
			end
		end #I2C #4
		# GSPI #1 unused
		device pci 1e.3 off end

		device pci 1f.3 on
			chip drivers/generic/max98357a
				register "hid" = ""MX98357A""
				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H3)"
				register "sdmode_delay" = "5"
				device generic 0 on end
			end
		end # Intel I2S
	end
end