soc: Add AMD Stoney Ridge southbridge code
Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This
is the first of a series of patches to migrate Stoney Ridge
support from cpu, northbridge, and southbridge to soc/
Changes:
- add soc/amd/stoneyridge and soc/amd/common
- remove all other Husdon versions
- update include paths, etc
- clean up Kconfig and Makefile
- create chip.c to contain chip_ops
Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
diff --git a/src/soc/amd/stoneyridge/hudson.c b/src/soc/amd/stoneyridge/hudson.c
new file mode 100644
index 0000000..8307014
--- /dev/null
+++ b/src/soc/amd/stoneyridge/hudson.c
@@ -0,0 +1,132 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+
+#include <arch/io.h>
+#include <arch/acpi.h>
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <cbmem.h>
+#include <soc/hudson.h>
+#include <soc/smbus.h>
+#include <soc/smi.h>
+#if IS_ENABLED(CONFIG_STONEYRIDGE_IMC_FWM)
+#include <fchec.h>
+#endif
+
+
+int acpi_get_sleep_type(void)
+{
+ u16 tmp = inw(ACPI_PM1_CNT_BLK);
+ tmp = ((tmp & (7 << 10)) >> 10);
+ return (int)tmp;
+}
+
+void pm_write8(u8 reg, u8 value)
+{
+ write8((void *)(PM_MMIO_BASE + reg), value);
+}
+
+u8 pm_read8(u8 reg)
+{
+ return read8((void *)(PM_MMIO_BASE + reg));
+}
+
+void pm_write16(u8 reg, u16 value)
+{
+ write16((void *)(PM_MMIO_BASE + reg), value);
+}
+
+u16 pm_read16(u16 reg)
+{
+ return read16((void *)(PM_MMIO_BASE + reg));
+}
+
+void hudson_enable(device_t dev)
+{
+ printk(BIOS_DEBUG, "hudson_enable()\n");
+ switch (dev->path.pci.devfn) {
+ case (0x14 << 3) | 7: /* 0:14.7 SD */
+ if (dev->enabled == 0) {
+ // read the VENDEV ID
+ device_t sd_dev = dev_find_slot( 0, PCI_DEVFN( 0x14, 7));
+ u32 sd_device_id = pci_read_config32( sd_dev, 0) >> 16;
+ /* turn off the SDHC controller in the PM reg */
+ u8 reg8;
+ if (sd_device_id == PCI_DEVICE_ID_AMD_HUDSON_SD) {
+ reg8 = pm_read8(PM_HUD_SD_FLASH_CTRL);
+ reg8 &= ~BIT(0);
+ pm_write8(PM_HUD_SD_FLASH_CTRL, reg8);
+ }
+ else if (sd_device_id == PCI_DEVICE_ID_AMD_YANGTZE_SD) {
+ reg8 = pm_read8(PM_YANG_SD_FLASH_CTRL);
+ reg8 &= ~BIT(0);
+ pm_write8(PM_YANG_SD_FLASH_CTRL, reg8);
+ }
+ /* remove device 0:14.7 from PCI space */
+ reg8 = pm_read8(PM_MANUAL_RESET);
+ reg8 &= ~BIT(6);
+ pm_write8(PM_MANUAL_RESET, reg8);
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static void hudson_init_acpi_ports(void)
+{
+ /* We use some of these ports in SMM regardless of whether or not
+ * ACPI tables are generated. Enable these ports indiscriminately.
+ */
+
+ pm_write16(PM_EVT_BLK, ACPI_PM_EVT_BLK);
+ pm_write16(PM1_CNT_BLK, ACPI_PM1_CNT_BLK);
+ pm_write16(PM_TMR_BLK, ACPI_PM_TMR_BLK);
+ pm_write16(PM_GPE0_BLK, ACPI_GPE0_BLK);
+ /* CpuControl is in \_PR.CP00, 6 bytes */
+ pm_write16(PM_CPU_CTRL, ACPI_CPU_CONTROL);
+
+ if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) {
+ pm_write16(PM_ACPI_SMI_CMD, ACPI_SMI_CTL_PORT);
+ hudson_enable_acpi_cmd_smi();
+ } else {
+ pm_write16(PM_ACPI_SMI_CMD, 0);
+ }
+
+ /* AcpiDecodeEnable, When set, SB uses the contents of the PM registers
+ * at index 60-6B to decode ACPI I/O address. AcpiSmiEn & SmiCmdEn
+ */
+ pm_write8(PM_ACPI_CONF, BIT(0) | BIT(1) | BIT(4) | BIT(2));
+}
+
+void hudson_init(void *chip_info)
+{
+ hudson_init_acpi_ports();
+}
+
+void hudson_final(void *chip_info)
+{
+#if IS_ENABLED(CONFIG_STONEYRIDGE_IMC_FWM)
+ agesawrapper_fchecfancontrolservice();
+#if !IS_ENABLED(CONFIG_ACPI_ENABLE_THERMAL_ZONE)
+ enable_imc_thermal_zone();
+#endif
+#endif
+}