soc: Add AMD Stoney Ridge southbridge code
Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This
is the first of a series of patches to migrate Stoney Ridge
support from cpu, northbridge, and southbridge to soc/
Changes:
- add soc/amd/stoneyridge and soc/amd/common
- remove all other Husdon versions
- update include paths, etc
- clean up Kconfig and Makefile
- create chip.c to contain chip_ops
Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/19722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
diff --git a/src/soc/amd/common/Kconfig b/src/soc/amd/common/Kconfig
new file mode 100644
index 0000000..fac3f43
--- /dev/null
+++ b/src/soc/amd/common/Kconfig
@@ -0,0 +1,4 @@
+config SOC_AMD_COMMON
+ bool
+ help
+ common code for AMD SOCs
diff --git a/src/soc/amd/common/Makefile.inc b/src/soc/amd/common/Makefile.inc
new file mode 100644
index 0000000..689065b
--- /dev/null
+++ b/src/soc/amd/common/Makefile.inc
@@ -0,0 +1,5 @@
+ifeq ($(CONFIG_SOC_AMD_COMMON),y)
+
+ramstage-y += amd_pci_util.c
+
+endif
diff --git a/src/soc/amd/common/amd_defs.h b/src/soc/amd/common/amd_defs.h
new file mode 100644
index 0000000..55db30f
--- /dev/null
+++ b/src/soc/amd/common/amd_defs.h
@@ -0,0 +1,22 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Raptor Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef _AMD_SB_DEFS_H_
+#define _AMD_SB_DEFS_H_
+
+#define AMD_SB_ACPI_MMIO_ADDR 0xfed80000ul
+
+#endif
diff --git a/src/soc/amd/common/amd_pci_util.c b/src/soc/amd/common/amd_pci_util.c
new file mode 100644
index 0000000..1966541
--- /dev/null
+++ b/src/soc/amd/common/amd_pci_util.c
@@ -0,0 +1,200 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <amd_pci_util.h>
+#include <pc80/i8259.h>
+#include <amd_pci_int_defs.h>
+#include <amd_pci_int_types.h>
+
+#ifndef __PRE_RAM__
+
+const struct pirq_struct * pirq_data_ptr = NULL;
+u32 pirq_data_size = 0;
+const u8 * intr_data_ptr = NULL;
+const u8 * picr_data_ptr = NULL;
+
+/*
+ * Read the FCH PCI_INTR registers 0xC00/0xC01 at a
+ * given index and a given PIC (0) or IOAPIC (1) mode
+ */
+u8 read_pci_int_idx(u8 index, int mode)
+{
+ outb((mode << 7) | index, PCI_INTR_INDEX);
+ return inb(PCI_INTR_DATA);
+}
+
+/*
+ * Write a value to the FCH PCI_INTR registers 0xC00/0xC01
+ * at a given index and PIC (0) or IOAPIC (1) mode
+ */
+void write_pci_int_idx(u8 index, int mode, u8 data)
+{
+ outb((mode << 7) | index, PCI_INTR_INDEX);
+ outb(data, PCI_INTR_DATA);
+}
+
+/*
+ * Write the FCH PCI_INTR registers 0xC00/0xC01 with values
+ * given in global variables intr_data and picr_data.
+ * These variables are defined in mainboard.c
+ */
+void write_pci_int_table (void)
+{
+ u8 byte;
+
+ if (picr_data_ptr == NULL || intr_data_ptr == NULL){
+ printk(BIOS_ERR, "Warning: Can't write PCI_INTR 0xC00/0xC01 registers because\n"
+ "'mainboard_picr_data' or 'mainboard_intr_data' tables are NULL\n");
+ return;
+ }
+
+ /* PIC IRQ routine */
+ printk(BIOS_DEBUG, "PCI_INTR tables: Writing registers C00/C01 for PIC mode PCI IRQ routing:\n"
+ "\tPCI_INTR_INDEX\t\tPCI_INTR_DATA\n");
+ for (byte = 0; byte < FCH_INT_TABLE_SIZE; byte++) {
+ if (intr_types[byte]) {
+ write_pci_int_idx(byte, 0, (u8) picr_data_ptr[byte]);
+ printk(BIOS_DEBUG, "\t0x%02X %s\t: 0x%02X\n",
+ byte, intr_types[byte], read_pci_int_idx(byte, 0));
+ }
+ }
+
+ /* APIC IRQ routine */
+ printk(BIOS_DEBUG, "PCI_INTR tables: Writing registers C00/C01 for APIC mode PCI IRQ routing:\n"
+ "\tPCI_INTR_INDEX\t\tPCI_INTR_DATA\n");
+ for (byte = 0; byte < FCH_INT_TABLE_SIZE; byte++) {
+ if (intr_types[byte]) {
+ write_pci_int_idx(byte, 1, (u8) intr_data_ptr[byte]);
+ printk(BIOS_DEBUG, "\t0x%02X %s\t: 0x%02X\n",
+ byte, intr_types[byte], read_pci_int_idx(byte, 1));
+ }
+ }
+}
+
+/*
+ * Function to write the PCI config space Interrupt
+ * registers based on the values given in PCI_INTR
+ * table at I/O port 0xC00/0xC01
+ */
+void write_pci_cfg_irqs(void)
+{
+ device_t dev = NULL; /* Our current device to route IRQs to */
+ device_t target_dev = NULL; /* The bridge that a device may be connected to */
+ u16 int_pin = 0; /* Value of the INT_PIN register 0x3D */
+ u16 target_pin = 0; /* Pin we will search our tables for */
+ u16 int_line = 0; /* IRQ number read from PCI_INTR table and programmed to INT_LINE reg 0x3C */
+ u16 pci_intr_idx = 0; /* Index into PCI_INTR table, 0xC00/0xC01 */
+ u8 bus = 0; /* A PCI Device Bus number */
+ u16 devfn = 0; /* A PCI Device and Function number */
+ u8 bridged_device = 0; /* This device is on a PCI bridge */
+ u32 i = 0;
+
+ if (pirq_data_ptr == NULL) {
+ printk(BIOS_WARNING, "Warning: Can't write PCI IRQ assignments because"
+ " 'mainboard_pirq_data' structure does not exist\n");
+ return;
+ }
+
+ /* Populate the PCI cfg space header with the IRQ assignment */
+ printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ assignments\n");
+
+ for (dev = all_devices; dev; dev = dev->next) {
+ /*
+ * Step 1: Get the INT_PIN and device structure to look for in the
+ * PCI_INTR table pirq_data
+ */
+ target_dev = NULL;
+ target_pin = get_pci_irq_pins(dev, &target_dev);
+ if (target_dev == NULL)
+ continue;
+
+ if (target_pin < 1)
+ continue;
+
+ /* Get the original INT_PIN for record keeping */
+ int_pin = pci_read_config8(dev, PCI_INTERRUPT_PIN);
+ if (int_pin < 1 || int_pin > 4)
+ continue; /* Device has invalid INT_PIN so skip it */
+
+ bus = target_dev->bus->secondary;
+ devfn = target_dev->path.pci.devfn;
+
+ /*
+ * Step 2: Use the INT_PIN and DevFn number to find the PCI_INTR
+ * register (0xC00) index for this device
+ */
+ pci_intr_idx = 0xBAD; /* Will check to make sure it changed */
+ for (i = 0; i < pirq_data_size; i++) {
+ if (pirq_data_ptr[i].devfn != devfn)
+ continue;
+
+ /* PIN_A is index 0 in pirq_data array but 1 in PCI cfg reg */
+ pci_intr_idx = pirq_data_ptr[i].PIN[target_pin - 1];
+ printk(BIOS_SPEW, "\tFound this device in pirq_data table entry %d\n", i);
+ break;
+ }
+
+ /*
+ * Step 3: Make sure we got a valid index and use it to get
+ * the IRQ number from the PCI_INTR register table
+ */
+ if (pci_intr_idx == 0xBAD) { /* Not on a bridge or in pirq_data table, skip it */
+ printk(BIOS_SPEW, "PCI Devfn (0x%x) not found in pirq_data table\n", devfn);
+ continue;
+ } else if (pci_intr_idx == 0x1F) { /* Index found is not defined */
+ printk(BIOS_SPEW, "Got index 0x1F (Not Connected), perhaps this device was defined wrong?\n");
+ continue;
+ } else if (pci_intr_idx >= FCH_INT_TABLE_SIZE) { /* Index out of bounds */
+ printk(BIOS_ERR, "%s: got 0xC00/0xC01 table index 0x%x, max is 0x%x\n",
+ __func__, pci_intr_idx, FCH_INT_TABLE_SIZE);
+ continue;
+ }
+
+ /* Find the value to program into the INT_LINE register from the PCI_INTR registers */
+ int_line = read_pci_int_idx(pci_intr_idx, 0);
+ if (int_line == PIRQ_NC) { /* The IRQ found is disabled */
+ printk(BIOS_SPEW, "Got IRQ 0x1F (disabled), perhaps this device was defined wrong?\n");
+ continue;
+ }
+
+ /*
+ * Step 4: Program the INT_LINE register in this device's
+ * PCI config space with the IRQ number we found in step 3
+ * and make it Level Triggered
+ */
+ pci_write_config8(dev, PCI_INTERRUPT_LINE, int_line);
+
+ /* Set this IRQ to level triggered since it is used by a PCI device */
+ i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED);
+
+ /*
+ * Step 5: Print out debug info and move on to next device
+ */
+ printk(BIOS_SPEW, "\tOrig INT_PIN\t: %d (%s)\n",
+ int_pin, pin_to_str(int_pin));
+ if (bridged_device)
+ printk(BIOS_SPEW, "\tSwizzled to\t: %d (%s)\n",
+ target_pin, pin_to_str(target_pin));
+ printk(BIOS_SPEW, "\tPCI_INTR idx\t: 0x%02x (%s)\n"
+ "\tINT_LINE\t: 0x%X (IRQ %d)\n",
+ pci_intr_idx, intr_types[pci_intr_idx], int_line, int_line);
+ } /* for (dev = all_devices) */
+ printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n");
+}
+#endif /* __PRE_RAM__ */
diff --git a/src/soc/amd/common/amd_pci_util.h b/src/soc/amd/common/amd_pci_util.h
new file mode 100644
index 0000000..fd5f077
--- /dev/null
+++ b/src/soc/amd/common/amd_pci_util.h
@@ -0,0 +1,41 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef AMD_PCI_UTIL_H
+#define AMD_PCI_UTIL_H
+
+#include <stdint.h>
+#include <amd_pci_int_defs.h>
+
+/* FCH index/data registers */
+#define PCI_INTR_INDEX 0xc00
+#define PCI_INTR_DATA 0xc01
+
+struct pirq_struct {
+ u8 devfn;
+ u8 PIN[4]; /* PINA/B/C/D are index 0/1/2/3 */
+};
+
+extern const struct pirq_struct * pirq_data_ptr;
+extern u32 pirq_data_size;
+extern const u8 * intr_data_ptr;
+extern const u8 * picr_data_ptr;
+
+u8 read_pci_int_idx(u8 index, int mode);
+void write_pci_int_idx(u8 index, int mode, u8 data);
+void write_pci_cfg_irqs(void);
+void write_pci_int_table (void);
+
+#endif /* AMD_PCI_UTIL_H */
diff --git a/src/soc/amd/stoneyridge/Kconfig b/src/soc/amd/stoneyridge/Kconfig
new file mode 100644
index 0000000..4cd3116
--- /dev/null
+++ b/src/soc/amd/stoneyridge/Kconfig
@@ -0,0 +1,167 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2017 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+config SOC_AMD_STONEYRIDGE
+ bool
+ select IOAPIC
+ select HAVE_USBDEBUG_OPTIONS
+ select HAVE_HARD_RESET
+ select SOC_AMD_COMMON
+
+if SOC_AMD_STONEYRIDGE
+
+config BOOTBLOCK_SOUTHBRIDGE_INIT
+ string
+ default "soc/amd/stoneyridge/bootblock/bootblock.c"
+
+config SOUTHBRIDGE_AMD_STONEYRIDGE_SKIP_ISA_DMA_INIT
+ bool
+ default n
+
+config EHCI_BAR
+ hex
+ default 0xfef00000
+
+config STONEYRIDGE_XHCI_ENABLE
+ bool "Enable Stoney Ridge XHCI Controller"
+ default y
+ help
+ The XHCI controller must be enabled and the XHCI firmware
+ must be added in order to have USB 3.0 support configured
+ by coreboot. The OS will be responsible for enabling the XHCI
+ controller if the the XHCI firmware is available but the
+ XHCI controller is not enabled by coreboot.
+
+config STONEYRIDGE_XHCI_FWM
+ bool "Add xhci firmware"
+ default y
+ help
+ Add Stoney Ridge XHCI Firmware to support the onboard USB 3.0
+
+config STONEYRIDGE_IMC_FWM
+ bool "Add IMC firmware"
+ default n
+ help
+ Add Stoney Ridge IMC Firmware to support the onboard fan control
+
+config STONEYRIDGE_GEC_FWM
+ bool
+ default n
+ help
+ Add Stoney Ridge GEC Firmware to support the onboard gigabit Ethernet MAC.
+ Must be connected to a Broadcom B50610 or B50610M PHY on the motherboard.
+
+config STONEYRIDGE_XHCI_FWM_FILE
+ string "XHCI firmware path and filename"
+ default "3rdparty/blobs/southbridge/amd/kern/xhci.bin"
+ depends on STONEYRIDGE_XHCI_FWM
+
+config STONEYRIDGE_IMC_FWM_FILE
+ string "IMC firmware path and filename"
+ default "3rdparty/blobs/southbridge/amd/kern/imc.bin"
+ depends on STONEYRIDGE_IMC_FWM
+
+config STONEYRIDGE_GEC_FWM_FILE
+ string "GEC firmware path and filename"
+ depends on STONEYRIDGE_GEC_FWM
+
+config AMD_PUBKEY_FILE
+ string "AMD public Key"
+ default "3rdparty/blobs/southbridge/amd/kern/PSP/AmdPubKeyST.bin"
+
+config STONEYRIDGE_SATA_MODE
+ int "SATA Mode"
+ default 0
+ range 0 6
+ help
+ Select the mode in which SATA should be driven.
+ The default is NATIVE.
+ 0: NATIVE mode does not require a ROM.
+ 2: AHCI may work with or without AHCI ROM. It depends on the payload support.
+ For example, seabios does not require the AHCI ROM.
+ 3: LEGACY IDE
+ 4: IDE to AHCI
+ 5: AHCI7804: ROM Required, and AMD driver required in the OS.
+ 6: IDE to AHCI7804: ROM Required, and AMD driver required in the OS.
+
+comment "NATIVE"
+ depends on STONEYRIDGE_SATA_MODE = 0
+
+comment "AHCI"
+ depends on STONEYRIDGE_SATA_MODE = 2
+
+comment "LEGACY IDE"
+ depends on STONEYRIDGE_SATA_MODE = 3
+
+comment "IDE to AHCI"
+ depends on STONEYRIDGE_SATA_MODE = 4
+
+comment "AHCI7804"
+ depends on STONEYRIDGE_SATA_MODE = 5
+
+comment "IDE to AHCI7804"
+ depends on STONEYRIDGE_SATA_MODE = 6
+
+if STONEYRIDGE_SATA_MODE = 2 || STONEYRIDGE_SATA_MODE = 5
+
+config AHCI_ROM_ID
+ string "AHCI device PCI IDs"
+ default "1022,7801" if STONEYRIDGE_SATA_MODE = 2
+ default "1022,7804" if STONEYRIDGE_SATA_MODE = 5
+
+endif # STONEYRIDGE_SATA_MODE = 2 || STONEYRIDGE_SATA_MODE = 5
+
+config STONEYRIDGE_LEGACY_FREE
+ bool "System is legacy free"
+ help
+ Select y if there is no keyboard controller in the system.
+ This sets variables in AGESA and ACPI.
+
+config AMDFW_OUTSIDE_CBFS
+ def_bool n
+ help
+ The AMDFW (PSP) is typically locatable in cbfs. Select this
+ option to manually attach the generated amdfw.rom at an
+ offset of 0x20000 from the bottom of the coreboot ROM image.
+
+config SERIRQ_CONTINUOUS_MODE
+ bool
+ default n
+ help
+ Set this option to y for serial IRQ in continuous mode.
+ Otherwise it is in quiet mode.
+
+config STONEYRIDGE_ACPI_IO_BASE
+ hex
+ default 0x400
+ help
+ Base address for the ACPI registers.
+ This value must match the hardcoded value of AGESA.
+
+config STONEYRIDGE_UART
+ bool "UART controller on Stoney Ridge"
+ default n
+ select DRIVERS_UART_8250MEM
+ select DRIVERS_UART_8250MEM_32
+ select NO_UART_ON_SUPERIO
+ select UART_OVERRIDE_REFCLK
+ help
+ There are two UART controllers in Stoney Ridge.
+ The UART registers are memory-mapped. UART
+ controller 0 registers range from FEDC_6000h
+ to FEDC_6FFFh. UART controller 1 registers
+ range from FEDC_8000h to FEDC_8FFFh.
+
+endif # SOC_AMD_STONEYRIDGE
diff --git a/src/soc/amd/stoneyridge/Makefile.inc b/src/soc/amd/stoneyridge/Makefile.inc
new file mode 100644
index 0000000..7c2682c
--- /dev/null
+++ b/src/soc/amd/stoneyridge/Makefile.inc
@@ -0,0 +1,236 @@
+#*****************************************************************************
+#
+# Copyright (c) 2012, 2016-2017 Advanced Micro Devices, Inc.
+# 2013 - 2014 Sage Electronic Engineering, LLC
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# * Neither the name of Advanced Micro Devices, Inc. nor the names of
+# its contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#*****************************************************************************
+ifeq ($(CONFIG_SOC_AMD_STONEYRIDGE),y)
+
+romstage-y += early_setup.c
+romstage-$(CONFIG_USBDEBUG_IN_ROMSTAGE) += enable_usbdebug.c
+romstage-$(CONFIG_STONEYRIDGE_IMC_FWM) += imc.c
+romstage-y += smbus.c
+romstage-y += smbus_spd.c
+romstage-$(CONFIG_STONEYRIDGE_UART) += uart.c
+
+ramstage-y += chip.c
+ramstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
+ramstage-$(CONFIG_HAVE_ACPI_TABLES) += fadt.c
+ramstage-y += gpio.c
+ramstage-y += hda.c
+ramstage-y += hudson.c
+ramstage-y += ide.c
+ramstage-$(CONFIG_STONEYRIDGE_IMC_FWM) += imc.c
+ramstage-y += lpc.c
+ramstage-y += pci.c
+ramstage-y += pcie.c
+ramstage-y += reset.c
+ramstage-y += sata.c
+ramstage-y += sd.c
+ramstage-y += sm.c
+ramstage-y += smbus.c
+ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c
+ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi_util.c
+ramstage-$(CONFIG_STONEYRIDGE_UART) += uart.c
+ramstage-y += usb.c
+
+smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += smi_util.c
+
+CPPFLAGS_common += -I$(src)/soc/amd/stoneyridge
+CPPFLAGS_common += -I$(src)/soc/amd/stoneyridge/include
+CPPFLAGS_common += -I$(src)/soc/amd/stoneyridge/acpi
+
+# ROMSIG At ROMBASE + 0x20000:
+# +-----------+---------------+----------------+------------+
+# |0x55AA55AA |EC ROM Address |GEC ROM Address |USB3 ROM |
+# +-----------+---------------+----------------+------------+
+# |PSPDIR ADDR|
+# +-----------+
+#
+# EC ROM should be 64K aligned.
+STONEYRIDGE_FWM_POSITION=$(call int-add, $(call int-subtract, 0xffffffff $(CONFIG_ROM_SIZE)) 0x20000 1)
+
+### 0
+FIRMWARE_LOCATE=$(dir $(call strip_quotes, $(CONFIG_AMD_PUBKEY_FILE)))
+FIRMWARE_TYPE=ST
+
+###5
+CONFIG_PUBSIGNEDKEY_FILE=$(top)/$(FIRMWARE_LOCATE)/RtmPubSigned$(FIRMWARE_TYPE).key
+
+###1
+CONFIG_PSPBTLDR_FILE=$(top)/$(FIRMWARE_LOCATE)/PspBootLoader_prod_$(FIRMWARE_TYPE).sbin
+
+###3
+CONFIG_PSPRCVR_FILE=$(top)/$(FIRMWARE_LOCATE)/PspRecoveryBootLoader_prod_$(FIRMWARE_TYPE).sbin
+
+###2
+CONFIG_PSPSCUREOS_FILE=$(top)/$(FIRMWARE_LOCATE)/PspSecureOs_prod_$(FIRMWARE_TYPE).csbin
+
+###4
+CONFIG_PSPNVRAM_FILE=$(top)/$(FIRMWARE_LOCATE)/PspNvram$(FIRMWARE_TYPE).bin
+
+###8
+CONFIG_SMUFWM_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware$(FIRMWARE_TYPE).sbin
+CONFIG_SMUFWM_FN_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware$(FIRMWARE_TYPE)_FN.sbin
+
+###95
+CONFIG_SMUSCS_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuScs$(FIRMWARE_TYPE).bin
+
+###9
+CONFIG_PSPSECUREDEBUG_FILE=$(top)/$(FIRMWARE_LOCATE)/PspSecureDebug$(FIRMWARE_TYPE).Key
+
+###12
+CONFIG_PSPTRUSTLETS_FILE=$(top)/$(FIRMWARE_LOCATE)/PspTrustlets_prod_$(FIRMWARE_TYPE).cbin
+
+###13
+CONFIG_TRUSTLETKEY_FILE=$(top)/$(FIRMWARE_LOCATE)/TrustletKey_prod_$(FIRMWARE_TYPE).sbin
+
+###18
+CONFIG_SMUFIRMWARE2_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware2_prod_$(FIRMWARE_TYPE).sbin
+CONFIG_SMUFIRMWARE2_FN_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware2_prod_$(FIRMWARE_TYPE)_FN.sbin
+
+add_opt_prefix=$(if $(call strip_quotes, $(1)), $(2) $(call strip_quotes, $(1)), )
+
+OPT_STONEYRIDGE_XHCI_FWM_FILE=$(call add_opt_prefix, $(CONFIG_STONEYRIDGE_XHCI_FWM_FILE), --xhci)
+OPT_STONEYRIDGE_IMC_FWM_FILE=$(call add_opt_prefix, $(CONFIG_STONEYRIDGE_IMC_FWM_FILE), --imc)
+OPT_STONEYRIDGE_GEC_FWM_FILE=$(call add_opt_prefix, $(CONFIG_STONEYRIDGE_GEC_FWM_FILEddd), --gec)
+
+CONFIG_2AMD_PUBKEY_FILE =$(CONFIG_AMD_PUBKEY_FILE)
+CONFIG_2PSPBTLDR_FILE =$(CONFIG_PSPBTLDR_FILE)
+CONFIG_2SMUFWM_FILE =$(CONFIG_SMUFWM_FILE)
+CONFIG_2SMUFWM_FN_FILE =$(CONFIG_SMUFWM_FN_FILE)
+CONFIG_2PSPRCVR_FILE =$(CONFIG_PSPRCVR_FILE)
+CONFIG_2PUBSIGNEDKEY_FILE =$(CONFIG_PUBSIGNEDKEY_FILE)
+CONFIG_2PSPSCUREOS_FILE =$(CONFIG_PSPSCUREOS_FILE)
+CONFIG_2PSPNVRAM_FILE =$(CONFIG_PSPNVRAM_FILE)
+CONFIG_2PSPSECUREDEBUG_FILE =$(CONFIG_PSPSECUREDEBUG_FILE)
+CONFIG_2PSPTRUSTLETS_FILE =$(CONFIG_PSPTRUSTLETS_FILE)
+CONFIG_2TRUSTLETKEY_FILE =$(CONFIG_TRUSTLETKEY_FILE)
+CONFIG_2SMUFIRMWARE2_FILE =$(CONFIG_SMUFIRMWARE2_FILE)
+CONFIG_2SMUFIRMWARE2_FN_FILE =$(CONFIG_SMUFIRMWARE2_FN_FILE)
+CONFIG_2SMUSCS_FILE =$(CONFIG_SMUSCS_FILE)
+
+OPT_2AMD_PUBKEY_FILE=$(call add_opt_prefix, $(CONFIG_2AMD_PUBKEY_FILE), --pubkey2)
+OPT_2PSPBTLDR_FILE=$(call add_opt_prefix, $(CONFIG_2PSPBTLDR_FILE), --bootloader2)
+OPT_2SMUFWM_FILE=$(call add_opt_prefix, $(CONFIG_2SMUFWM_FILE), --smufirmware_2)
+OPT_2PSPRCVR_FILE=$(call add_opt_prefix, $(CONFIG_2PSPRCVR_FILE), --recovery2)
+OPT_2PUBSIGNEDKEY_FILE=$(call add_opt_prefix, $(CONFIG_2PUBSIGNEDKEY_FILE), --rtmpubkey2)
+OPT_2PSPSCUREOS_FILE=$(call add_opt_prefix, $(CONFIG_2PSPSCUREOS_FILE), --secureos2)
+OPT_2PSPNVRAM_FILE=$(call add_opt_prefix, $(CONFIG_2PSPNVRAM_FILE), --nvram2)
+OPT_2PSPSECUREDEBUG_FILE=$(call add_opt_prefix, $(CONFIG_2PSPSECUREDEBUG_FILE), --securedebug2)
+OPT_2PSPTRUSTLETS_FILE=$(call add_opt_prefix, $(CONFIG_2PSPTRUSTLETS_FILE), --trustlets2)
+OPT_2TRUSTLETKEY_FILE=$(call add_opt_prefix, $(CONFIG_2TRUSTLETKEY_FILE), --trustletkey2)
+OPT_2SMUFIRMWARE2_FILE=$(call add_opt_prefix, $(CONFIG_2SMUFIRMWARE2_FILE), --smufirmware2_2)
+OPT_2SMUSCS_FILE=$(call add_opt_prefix, $(CONFIG_2SMUSCS_FILE), --smuscs2)
+OPT_2SMUFWM_FN_FILE=$(call add_opt_prefix, $(CONFIG_2SMUFWM_FN_FILE), --smufnfirmware_2)
+OPT_2SMUFIRMWARE2_FN_FILE=$(call add_opt_prefix, $(CONFIG_2SMUFIRMWARE2_FN_FILE), --smufnfirmware2_2)
+
+
+$(obj)/amdfw.rom: $(call strip_quotes, $(CONFIG_STONEYRIDGE_XHCI_FWM_FILE)) \
+ $(call strip_quotes, $(CONFIG_STONEYRIDGE_IMC_FWM_FILE)) \
+ $(call strip_quotes, $(CONFIG_STONEYRIDGE_GEC_FWM_FILE)) \
+ $(call strip_quotes, $(CONFIG_AMD_PUBKEY_FILE)) \
+ $(call strip_quotes, $(CONFIG_PUBSIGNEDKEY_FILE)) \
+ $(call strip_quotes, $(CONFIG_PSPBTLDR_FILE)) \
+ $(call strip_quotes, $(CONFIG_PSPRCVR_FILE)) \
+ $(call strip_quotes, $(CONFIG_PSPSCUREOS_FILE)) \
+ $(call strip_quotes, $(CONFIG_PSPNVRAM_FILE)) \
+ $(call strip_quotes, $(CONFIG_SMUFWM_FILE)) \
+ $(call strip_quotes, $(CONFIG_SMUSCS_FILE)) \
+ $(call strip_quotes, $(CONFIG_PSPSECUREDEBUG_FILE)) \
+ $(call strip_quotes, $(CONFIG_PSPTRUSTLETS_FILE)) \
+ $(call strip_quotes, $(CONFIG_TRUSTLETKEY_FILE)) \
+ $(call strip_quotes, $(CONFIG_SMUFIRMWARE2_FILE)) \
+ $(call strip_quotes, $(CONFIG_2AMD_PUBKEY_FILE)) \
+ $(call strip_quotes, $(CONFIG_2PUBSIGNEDKEY_FILE)) \
+ $(call strip_quotes, $(CONFIG_2PSPBTLDR_FILE)) \
+ $(call strip_quotes, $(CONFIG_2SMUFWM_FILE)) \
+ $(call strip_quotes, $(CONFIG_2SMUFWM_FN_FILE)) \
+ $(call strip_quotes, $(CONFIG_2PSPRCVR_FILE)) \
+ $(call strip_quotes, $(CONFIG_2PSPSCUREOS_FILE)) \
+ $(call strip_quotes, $(CONFIG_2PSPNVRAM_FILE)) \
+ $(call strip_quotes, $(CONFIG_2SMUSCS_FILE)) \
+ $(call strip_quotes, $(CONFIG_2PSPSECUREDEBUG_FILE)) \
+ $(call strip_quotes, $(CONFIG_2PSPTRUSTLETS_FILE)) \
+ $(call strip_quotes, $(CONFIG_2TRUSTLETKEY_FILE)) \
+ $(call strip_quotes, $(CONFIG_2SMUFIRMWARE2_FILE)) \
+ $(call strip_quotes, $(CONFIG_2SMUFIRMWARE2_FN_FILE)) \
+ $(AMDFWTOOL)
+ rm -f $@
+ @printf " AMDFWTOOL $(subst $(obj)/,,$(@))\n"
+ $(AMDFWTOOL) \
+ $(OPT_STONEYRIDGE_XHCI_FWM_FILE) \
+ $(OPT_STONEYRIDGE_IMC_FWM_FILE) \
+ $(OPT_STONEYRIDGE_GEC_FWM_FILE) \
+ $(OPT_AMD_PUBKEY_FILE) \
+ $(OPT_PSPBTLDR_FILE) \
+ $(OPT_SMUFWM_FILE) \
+ $(OPT_PSPRCVR_FILE) \
+ $(OPT_PUBSIGNEDKEY_FILE) \
+ $(OPT_PSPSCUREOS_FILE) \
+ $(OPT_PSPNVRAM_FILE) \
+ $(OPT_PSPSECUREDEBUG_FILE) \
+ $(OPT_PSPTRUSTLETS_FILE) \
+ $(OPT_TRUSTLETKEY_FILE) \
+ $(OPT_SMUFIRMWARE2_FILE) \
+ $(OPT_SMUSCS_FILE) \
+ $(OPT_2AMD_PUBKEY_FILE) \
+ $(OPT_2PSPBTLDR_FILE) \
+ $(OPT_2SMUFWM_FILE) \
+ $(OPT_2SMUFWM_FN_FILE) \
+ $(OPT_2PSPRCVR_FILE) \
+ $(OPT_2PUBSIGNEDKEY_FILE) \
+ $(OPT_2PSPSCUREOS_FILE) \
+ $(OPT_2PSPNVRAM_FILE) \
+ $(OPT_2PSPSECUREDEBUG_FILE) \
+ $(OPT_2PSPTRUSTLETS_FILE) \
+ $(OPT_2TRUSTLETKEY_FILE) \
+ $(OPT_2SMUFIRMWARE2_FILE) \
+ $(OPT_2SMUFIRMWARE2_FN_FILE) \
+ $(OPT_2SMUSCS_FILE) \
+ --flashsize $(CONFIG_ROM_SIZE) \
+ --output $@
+
+ifeq ($(CONFIG_AMDFW_OUTSIDE_CBFS),y)
+PHONY+=add_amdfw
+INTERMEDIATE+=add_amdfw
+
+add_amdfw: $(obj)/coreboot.pre $(obj)/amdfw.rom
+ printf " DD Adding AMD Firmware\n"
+ dd if=$(obj)/amdfw.rom \
+ of=$(obj)/coreboot.pre conv=notrunc bs=1 seek=131072 >/dev/null 2>&1
+
+else # ifeq ($(CONFIG_AMDFW_OUTSIDE_CBFS),y)
+
+cbfs-files-y += apu/amdfw
+apu/amdfw-file := $(obj)/amdfw.rom
+apu/amdfw-position := $(STONEYRIDGE_FWM_POSITION)
+apu/amdfw-type := raw
+
+endif # ifeq ($(CONFIG_AMDFW_OUTSIDE_CBFS),y)
+
+endif
diff --git a/src/soc/amd/stoneyridge/acpi/fch.asl b/src/soc/amd/stoneyridge/acpi/fch.asl
new file mode 100644
index 0000000..df9caac
--- /dev/null
+++ b/src/soc/amd/stoneyridge/acpi/fch.asl
@@ -0,0 +1,184 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* South Bridge */
+/* _SB.PCI0 */
+
+/* Operating System Capabilities Method */
+Method(_OSC,4)
+{
+ // Create DWord-addressable fields from the Capabilities Buffer
+ CreateDWordField(Arg3,0,CDW1)
+ CreateDWordField(Arg3,4,CDW2)
+ CreateDWordField(Arg3,8,CDW3)
+
+ /* Check for proper PCI/PCIe UUID */
+ If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766")))
+ {
+ /* Let OS control everything */
+ Return (Arg3)
+ } Else {
+ Or(CDW1,4,CDW1) // Unrecognized UUID
+ Return(Arg3)
+ }
+}
+
+/* Describe the Southbridge devices */
+
+/* 0:11.0 - SATA */
+Device(STCR) {
+ Name(_ADR, 0x00110000)
+} /* end STCR */
+
+/* 0:14.0 - SMBUS */
+Device(SBUS) {
+ Name(_ADR, 0x00140000)
+} /* end SBUS */
+
+#include "usb.asl"
+
+/* 0:14.2 - I2S Audio */
+
+/* 0:14.3 - LPC */
+#include "lpc.asl"
+
+/* 0:14.7 - SD Controller */
+Device(SDCN) {
+ Name(_ADR, 0x00140007)
+} /* end SDCN */
+
+Name(CRES, ResourceTemplate() {
+ /* Set the Bus number and Secondary Bus number for the PCI0 device
+ * The Secondary bus range for PCI0 lets the system
+ * know what bus values are allowed on the downstream
+ * side of this PCI bus if there is a PCI-PCI bridge.
+ * PCI busses can have 256 secondary busses which
+ * range from [0-0xFF] but they do not need to be
+ * sequential.
+ */
+ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+ 0x0000, /* address granularity */
+ 0x0000, /* range minimum */
+ 0x00FF, /* range maximum */
+ 0x0000, /* translation */
+ 0x0100, /* length */
+ ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */
+
+ IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
+
+ WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, /* address granularity */
+ 0x0000, /* range minimum */
+ 0x0CF7, /* range maximum */
+ 0x0000, /* translation */
+ 0x0CF8 /* length */
+ )
+ WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, /* address granularity */
+ 0x03B0, /* range minimum */
+ 0x03DF, /* range maximum */
+ 0x0000, /* translation */
+ 0x0030 /* length */
+ )
+
+ WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, /* address granularity */
+ 0x0D00, /* range minimum */
+ 0xFFFF, /* range maximum */
+ 0x0000, /* translation */
+ 0xF300 /* length */
+ )
+
+ Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */
+ Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */
+
+ /* memory space for PCI BARs below 4GB */
+ Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO)
+}) /* End Name(_SB.PCI0.CRES) */
+
+Method(_CRS, 0) {
+ /* DBGO("\\_SB\\PCI0\\_CRS\n") */
+ CreateDWordField(CRES, ^MMIO._BAS, MM1B)
+ CreateDWordField(CRES, ^MMIO._LEN, MM1L)
+
+ /*
+ * Declare memory between TOM1 and 4GB as available
+ * for PCI MMIO.
+ * Use ShiftLeft to avoid 64bit constant (for XP).
+ * This will work even if the OS does 32bit arithmetic, as
+ * 32bit (0x00000000 - TOM1) will wrap and give the same
+ * result as 64bit (0x100000000 - TOM1).
+ */
+ Store(TOM1, MM1B)
+ ShiftLeft(0x10000000, 4, Local0)
+ Subtract(Local0, TOM1, Local0)
+ Store(Local0, MM1L)
+
+ Return(CRES) /* note to change the Name buffer */
+} /* end of Method(_SB.PCI0._CRS) */
+
+/*
+ *
+ * FIRST METHOD CALLED UPON BOOT
+ *
+ * 1. If debugging, print current OS and ACPI interpreter.
+ * 2. Get PCI Interrupt routing from ACPI VSM, this
+ * value is based on user choice in BIOS setup.
+ */
+Method(_INI, 0) {
+ /* DBGO("\\_SB\\_INI\n") */
+ /* DBGO(" DSDT.ASL code from ") */
+ /* DBGO(__DATE__) */
+ /* DBGO(" ") */
+ /* DBGO(__TIME__) */
+ /* DBGO("\n Sleep states supported: ") */
+ /* DBGO("\n") */
+ /* DBGO(" \\_OS=") */
+ /* DBGO(\_OS) */
+ /* DBGO("\n \\_REV=") */
+ /* DBGO(\_REV) */
+ /* DBGO("\n") */
+
+ /* Determine the OS we're running on */
+ OSFL()
+
+#if IS_ENABLED(CONFIG_ACPI_ENABLE_THERMAL_ZONE)
+ /* TODO: It is unstable. */
+ #include "acpi/AmdImc.asl" /* Hudson IMC function */
+ ITZE() /* enable IMC Fan Control*/
+#endif
+} /* End Method(_SB._INI) */
+
+Method(OSFL, 0){
+
+ if (LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */
+
+ if (CondRefOf(\_OSI))
+ {
+ Store(1, OSVR) /* Assume some form of XP */
+ if (\_OSI("Windows 2006")) /* Vista */
+ {
+ Store(2, OSVR)
+ }
+ } else {
+ If(WCMP(\_OS,"Linux")) {
+ Store(3, OSVR) /* Linux */
+ } Else {
+ Store(4, OSVR) /* Gotta be WinCE */
+ }
+ }
+ Return(OSVR)
+}
diff --git a/src/soc/amd/stoneyridge/acpi/lpc.asl b/src/soc/amd/stoneyridge/acpi/lpc.asl
new file mode 100644
index 0000000..6332d47
--- /dev/null
+++ b/src/soc/amd/stoneyridge/acpi/lpc.asl
@@ -0,0 +1,103 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* 0:14.3 - LPC */
+Device(LIBR) {
+ Name(_ADR, 0x00140003)
+ /* Method(_INI) {
+ * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+ } */ /* End Method(_SB.SBRDG._INI) */
+
+ OperationRegion(CFG,PCI_Config,0x0,0x100) // Map PCI Configuration Space
+ Field(CFG,DWordAcc,NoLock,Preserve){
+ Offset(0xA0),
+ BAR,32} // SPI Controller Base Address Register (Index 0xA0)
+
+ Device(LDRC) // LPC device: Resource consumption
+ {
+ Name (_HID, EISAID("PNP0C02")) // ID for Motherboard resources
+ Name (CRS, ResourceTemplate () // Current Motherboard resources
+ {
+ Memory32Fixed(ReadWrite, // Setup for fixed resource location for SPI base address
+ 0x00000000, // Address Base
+ 0x00000000, // Address Length
+ BAR0 // Descriptor Name
+ )
+ })
+
+ Method(_CRS,0,NotSerialized)
+ {
+ CreateDwordField(^CRS,^BAR0._BAS,SPIB) // Field to hold SPI base address
+ CreateDwordField(^CRS,^BAR0._LEN,SPIL) // Field to hold SPI address length
+ Store(BAR,SPIB) // SPI base address mapped
+ Store(0x1000,SPIL) // 4k space mapped
+ Return(CRS)
+ }
+ }
+
+ /* Real Time Clock Device */
+ Device(RTC0) {
+ Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){8}
+ IO(Decode16,0x0070, 0x0070, 0, 2)
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+ Device(TMR) { /* Timer */
+ Name(_HID,EISAID("PNP0100")) /* System Timer */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){0}
+ IO(Decode16, 0x0040, 0x0040, 0, 4)
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+ Device(SPKR) { /* Speaker */
+ Name(_HID,EISAID("PNP0800")) /* AT style speaker */
+ Name(_CRS, ResourceTemplate() {
+ IO(Decode16, 0x0061, 0x0061, 0, 1)
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+ Device(PIC) {
+ Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){2}
+ IO(Decode16,0x0020, 0x0020, 0, 2)
+ IO(Decode16,0x00A0, 0x00A0, 0, 2)
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+ Device(MAD) { /* 8257 DMA */
+ Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */
+ Name(_CRS, ResourceTemplate() {
+ DMA(Compatibility,BusMaster,Transfer8){4}
+ IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+ IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
+ IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
+ IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
+ IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
+ IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+ }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+ } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+ Device(COPR) {
+ Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */
+ Name(_CRS, ResourceTemplate() {
+ IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+ IRQNoFlags(){13}
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+} /* end LIBR */
diff --git a/src/soc/amd/stoneyridge/acpi/pci_int.asl b/src/soc/amd/stoneyridge/acpi/pci_int.asl
new file mode 100644
index 0000000..52e9e28
--- /dev/null
+++ b/src/soc/amd/stoneyridge/acpi/pci_int.asl
@@ -0,0 +1,469 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+ /* PCIe Configuration Space for CONFIG_MMCONF_BUS_NUMBER busses */
+ OperationRegion(PCFG, SystemMemory, PCBA, PCLN) /* Each bus consumes 1MB */
+ Field(PCFG, ByteAcc, NoLock, Preserve) {
+ /* Byte offsets are computed using the following technique:
+ * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+ * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+ */
+ Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
+ STB5, 32,
+ Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+ PT0D, 1,
+ PT1D, 1,
+ PT2D, 1,
+ PT3D, 1,
+ PT4D, 1,
+ PT5D, 1,
+ PT6D, 1,
+ PT7D, 1,
+ PT8D, 1,
+ PT9D, 1,
+ Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */
+ SBIE, 1,
+ SBME, 1,
+ Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */
+ SBRI, 8,
+ Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */
+ SBB1, 32,
+ Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */
+ ,14,
+ P92E, 1, /* Port92 decode enable */
+ }
+
+ OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+ Field(SB5, AnyAcc, NoLock, Preserve){
+ /* Port 0 */
+ Offset(0x120), /* Port 0 Task file status */
+ P0ER, 1,
+ , 2,
+ P0DQ, 1,
+ , 3,
+ P0BY, 1,
+ Offset(0x128), /* Port 0 Serial ATA status */
+ P0DD, 4,
+ , 4,
+ P0IS, 4,
+ Offset(0x12C), /* Port 0 Serial ATA control */
+ P0DI, 4,
+ Offset(0x130), /* Port 0 Serial ATA error */
+ , 16,
+ P0PR, 1,
+
+ /* Port 1 */
+ offset(0x1A0), /* Port 1 Task file status */
+ P1ER, 1,
+ , 2,
+ P1DQ, 1,
+ , 3,
+ P1BY, 1,
+ Offset(0x1A8), /* Port 1 Serial ATA status */
+ P1DD, 4,
+ , 4,
+ P1IS, 4,
+ Offset(0x1AC), /* Port 1 Serial ATA control */
+ P1DI, 4,
+ Offset(0x1B0), /* Port 1 Serial ATA error */
+ , 16,
+ P1PR, 1,
+
+ /* Port 2 */
+ Offset(0x220), /* Port 2 Task file status */
+ P2ER, 1,
+ , 2,
+ P2DQ, 1,
+ , 3,
+ P2BY, 1,
+ Offset(0x228), /* Port 2 Serial ATA status */
+ P2DD, 4,
+ , 4,
+ P2IS, 4,
+ Offset(0x22C), /* Port 2 Serial ATA control */
+ P2DI, 4,
+ Offset(0x230), /* Port 2 Serial ATA error */
+ , 16,
+ P2PR, 1,
+
+ /* Port 3 */
+ Offset(0x2A0), /* Port 3 Task file status */
+ P3ER, 1,
+ , 2,
+ P3DQ, 1,
+ , 3,
+ P3BY, 1,
+ Offset(0x2A8), /* Port 3 Serial ATA status */
+ P3DD, 4,
+ , 4,
+ P3IS, 4,
+ Offset(0x2AC), /* Port 3 Serial ATA control */
+ P3DI, 4,
+ Offset(0x2B0), /* Port 3 Serial ATA error */
+ , 16,
+ P3PR, 1,
+ }
+
+ Method(_PIC, 0x01, NotSerialized)
+ {
+ If (Arg0)
+ {
+ \_SB.CIRQ()
+ }
+ Store(Arg0, PMOD)
+ }
+
+ Method(CIRQ, 0x00, NotSerialized){
+ }
+
+ Name(IRQB, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Shared){15}
+ })
+
+ Name(IRQP, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+ })
+
+ Name(PITF, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Exclusive){9}
+ })
+
+ Device(INTA) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 1)
+
+ Method(_STA, 0) {
+ if (PIRA) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTA._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_DIS\n") */
+ } /* End Method(_SB.INTA._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTA._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRA, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTA._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKA\\_SRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRA)
+ } /* End Method(_SB.INTA._SRS) */
+ } /* End Device(INTA) */
+
+ Device(INTB) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 2)
+
+ Method(_STA, 0) {
+ if (PIRB) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTB._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_DIS\n") */
+ } /* End Method(_SB.INTB._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTB._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRB, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTB._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKB\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRB)
+ } /* End Method(_SB.INTB._SRS) */
+ } /* End Device(INTB) */
+
+ Device(INTC) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 3)
+
+ Method(_STA, 0) {
+ if (PIRC) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTC._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_DIS\n") */
+ } /* End Method(_SB.INTC._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTC._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRC, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTC._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKC\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRC)
+ } /* End Method(_SB.INTC._SRS) */
+ } /* End Device(INTC) */
+
+ Device(INTD) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 4)
+
+ Method(_STA, 0) {
+ if (PIRD) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTD._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_DIS\n") */
+ } /* End Method(_SB.INTD._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTD._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRD, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTD._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKD\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRD)
+ } /* End Method(_SB.INTD._SRS) */
+ } /* End Device(INTD) */
+
+ Device(INTE) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 5)
+
+ Method(_STA, 0) {
+ if (PIRE) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTE._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_DIS\n") */
+ } /* End Method(_SB.INTE._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTE._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRE, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTE._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKE\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRE)
+ } /* End Method(_SB.INTE._SRS) */
+ } /* End Device(INTE) */
+
+ Device(INTF) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 6)
+
+ Method(_STA, 0) {
+ if (PIRF) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTF._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_DIS\n") */
+ } /* End Method(_SB.INTF._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_PRS\n") */
+ Return(PITF)
+ } /* Method(_SB.INTF._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRF, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTF._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKF\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRF)
+ } /* End Method(_SB.INTF._SRS) */
+ } /* End Device(INTF) */
+
+ Device(INTG) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 7)
+
+ Method(_STA, 0) {
+ if (PIRG) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTG._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_DIS\n") */
+ } /* End Method(_SB.INTG._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTG._CRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRG, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTG._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKG\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRG)
+ } /* End Method(_SB.INTG._SRS) */
+ } /* End Device(INTG) */
+
+ Device(INTH) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 8)
+
+ Method(_STA, 0) {
+ if (PIRH) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTH._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_DIS\n") */
+ } /* End Method(_SB.INTH._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTH._CRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIRH, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTH._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKH\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIRH)
+ } /* End Method(_SB.INTH._SRS) */
+ } /* End Device(INTH) */
diff --git a/src/soc/amd/stoneyridge/acpi/pcie.asl b/src/soc/amd/stoneyridge/acpi/pcie.asl
new file mode 100644
index 0000000..adb5c4d
--- /dev/null
+++ b/src/soc/amd/stoneyridge/acpi/pcie.asl
@@ -0,0 +1,99 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+ /* PCI IRQ mapping registers, C00h-C01h. */
+ OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+ Field(PRQM, ByteAcc, NoLock, Preserve) {
+ PRQI, 0x00000008,
+ PRQD, 0x00000008, /* Offset: 1h */
+ }
+ IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+ PIRA, 0x00000008, /* Index 0 */
+ PIRB, 0x00000008, /* Index 1 */
+ PIRC, 0x00000008, /* Index 2 */
+ PIRD, 0x00000008, /* Index 3 */
+ PIRE, 0x00000008, /* Index 4 */
+ PIRF, 0x00000008, /* Index 5 */
+ PIRG, 0x00000008, /* Index 6 */
+ PIRH, 0x00000008, /* Index 7 */
+ }
+
+ /* PCI Error control register */
+ OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+ Field(PERC, ByteAcc, NoLock, Preserve) {
+ SENS, 0x00000001,
+ PENS, 0x00000001,
+ SENE, 0x00000001,
+ PENE, 0x00000001,
+ }
+
+ /* Client Management index/data registers */
+ OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+ Field(CMT, ByteAcc, NoLock, Preserve) {
+ CMTI, 8,
+ /* Client Management Data register */
+ G64E, 1,
+ G64O, 1,
+ G32O, 2,
+ , 2,
+ GPSL, 2,
+ }
+
+ /* GPM Port register */
+ OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+ Field(GPT, ByteAcc, NoLock, Preserve) {
+ GPB0,1,
+ GPB1,1,
+ GPB2,1,
+ GPB3,1,
+ GPB4,1,
+ GPB5,1,
+ GPB6,1,
+ GPB7,1,
+ }
+
+ /* Flash ROM program enable register */
+ OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+ Field(FRE, ByteAcc, NoLock, Preserve) {
+ , 0x00000006,
+ FLRE, 0x00000001,
+ }
+
+ /* PM2 index/data registers */
+ OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+ Field(PM2R, ByteAcc, NoLock, Preserve) {
+ PM2I, 0x00000008,
+ PM2D, 0x00000008,
+ }
+
+ /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */
+ OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+ Field(PIOR, ByteAcc, NoLock, Preserve) {
+ PIOI, 0x00000008,
+ PIOD, 0x00000008,
+ }
+
+ IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+ Offset(0x60), /* AcpiPm1EvgBlk */
+ P1EB, 16,
+ Offset(0xEE),
+ UPWS, 3,
+ }
+ OperationRegion (P1E0, SystemIO, P1EB, 0x04)
+ Field (P1E0, ByteAcc, Nolock, Preserve) {
+ Offset(0x02),
+ , 14,
+ PEWD, 1,
+ }
diff --git a/src/soc/amd/stoneyridge/acpi/sleepstates.asl b/src/soc/amd/stoneyridge/acpi/sleepstates.asl
new file mode 100644
index 0000000..d93f068
--- /dev/null
+++ b/src/soc/amd/stoneyridge/acpi/sleepstates.asl
@@ -0,0 +1,38 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Supported sleep states: */
+Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */
+
+If (LAnd(SSFG, 0x01)) {
+ Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */
+}
+If (LAnd(SSFG, 0x02)) {
+ Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */
+}
+#if CONFIG_HAVE_ACPI_RESUME
+If (LAnd(SSFG, 0x04)) {
+ Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */
+}
+#endif
+If (LAnd(SSFG, 0x08)) {
+ Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */
+}
+
+Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */
+
+Name(\_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+Name(CSMS, 0) /* Current System State */
diff --git a/src/soc/amd/stoneyridge/acpi/smbus.asl b/src/soc/amd/stoneyridge/acpi/smbus.asl
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/src/soc/amd/stoneyridge/acpi/smbus.asl
diff --git a/src/soc/amd/stoneyridge/acpi/usb.asl b/src/soc/amd/stoneyridge/acpi/usb.asl
new file mode 100644
index 0000000..fd3ff54
--- /dev/null
+++ b/src/soc/amd/stoneyridge/acpi/usb.asl
@@ -0,0 +1,65 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* 0:12.0 - OHCI */
+Device(UOH1) {
+ Name(_ADR, 0x00120000)
+ Name(_PRW, Package() {0x0B, 3})
+} /* end UOH1 */
+
+/* 0:12.2 - EHCI */
+Device(UOH2) {
+ Name(_ADR, 0x00120002)
+ Name(_PRW, Package() {0x0B, 3})
+} /* end UOH2 */
+
+/* 0:13.0 - OHCI */
+Device(UOH3) {
+ Name(_ADR, 0x00130000)
+ Name(_PRW, Package() {0x0B, 3})
+} /* end UOH3 */
+
+/* 0:13.2 - EHCI */
+Device(UOH4) {
+ Name(_ADR, 0x00130002)
+ Name(_PRW, Package() {0x0B, 3})
+} /* end UOH4 */
+
+/* 0:16.0 - OHCI */
+Device(UOH5) {
+ Name(_ADR, 0x00160000)
+ Name(_PRW, Package() {0x0B, 3})
+} /* end UOH5 */
+
+/* 0:16.2 - EHCI */
+Device(UOH6) {
+ Name(_ADR, 0x00160002)
+ Name(_PRW, Package() {0x0B, 3})
+} /* end UOH5 */
+
+/* 0:10.0 - XHCI 0*/
+Device(XHC0) {
+ Name(_ADR, 0x00100000)
+ Name(_PRW, Package() {0x0B, 4})
+} /* end XHC0 */
+
+#if !CONFIG_SOUTHBRIDGE_AMD_PI_AVALON && !CONFIG_SOUTHBRIDGE_AMD_PI_KERN
+/* 0:10.1 - XHCI 1*/
+Device(XHC1) {
+ Name(_ADR, 0x00100001)
+ Name(_PRW, Package() {0x0B, 4})
+} /* end XHC1 */
+#endif
diff --git a/src/soc/amd/stoneyridge/bootblock/bootblock.c b/src/soc/amd/stoneyridge/bootblock/bootblock.c
new file mode 100644
index 0000000..32b1298
--- /dev/null
+++ b/src/soc/amd/stoneyridge/bootblock/bootblock.c
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <device/pci_ids.h>
+
+/*
+ * Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF.
+ *
+ * Hardware should enable LPC ROM by pin straps. This function does not
+ * handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations.
+ *
+ * The HUDSON power-on default is to map 512K ROM space.
+ *
+ */
+static void hudson_enable_rom(void)
+{
+ u8 reg8;
+ pci_devfn_t dev;
+
+ dev = PCI_DEV(0, 0x14, 3);
+
+ /* Decode variable LPC ROM address ranges 1 and 2. */
+ reg8 = pci_io_read_config8(dev, 0x48);
+ reg8 |= (1 << 3) | (1 << 4);
+ pci_io_write_config8(dev, 0x48, reg8);
+
+ /* LPC ROM address range 1: */
+ /* Enable LPC ROM range mirroring start at 0x000e(0000). */
+ pci_io_write_config16(dev, 0x68, 0x000e);
+ /* Enable LPC ROM range mirroring end at 0x000f(ffff). */
+ pci_io_write_config16(dev, 0x6a, 0x000f);
+
+ /* LPC ROM address range 2: */
+ /*
+ * Enable LPC ROM range start at:
+ * 0xfff8(0000): 512KB
+ * 0xfff0(0000): 1MB
+ * 0xffe0(0000): 2MB
+ * 0xffc0(0000): 4MB
+ */
+ pci_io_write_config16(dev, 0x6c, 0x10000 - (CONFIG_COREBOOT_ROMSIZE_KB >> 6));
+ /* Enable LPC ROM range end at 0xffff(ffff). */
+ pci_io_write_config16(dev, 0x6e, 0xffff);
+}
+
+static void bootblock_southbridge_init(void)
+{
+ hudson_enable_rom();
+}
diff --git a/src/soc/amd/stoneyridge/chip.c b/src/soc/amd/stoneyridge/chip.c
new file mode 100644
index 0000000..3faf536
--- /dev/null
+++ b/src/soc/amd/stoneyridge/chip.c
@@ -0,0 +1,60 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <chip.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <soc/hudson.h>
+
+static void pci_domain_set_resources(device_t dev)
+{
+ assign_resources(dev->link_list);
+}
+
+static struct device_operations pci_domain_ops = {
+ .set_resources = &pci_domain_set_resources,
+};
+
+static struct device_operations cpu_bus_ops = {
+};
+
+static void enable_dev(device_t dev)
+{
+ /* Set the operations if it is a special bus type */
+ if (dev->path.type == DEVICE_PATH_DOMAIN) {
+ dev->ops = &pci_domain_ops;
+ } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) {
+ dev->ops = &cpu_bus_ops;
+ } else if (dev->path.type == DEVICE_PATH_PCI) {
+ hudson_enable(dev);
+ }
+}
+
+static void soc_init(void *chip_info)
+{
+ hudson_init(chip_info);
+}
+
+static void soc_final(void *chip_info)
+{
+ hudson_final(chip_info);
+}
+
+struct chip_operations soc_amd_stoneyridge_ops = {
+ CHIP_NAME("AMD StoneyRidge SOC")
+ .enable_dev = &enable_dev,
+ .init = &soc_init,
+ .final = &soc_final
+};
+
diff --git a/src/soc/amd/stoneyridge/chip.h b/src/soc/amd/stoneyridge/chip.h
new file mode 100644
index 0000000..9dd4997
--- /dev/null
+++ b/src/soc/amd/stoneyridge/chip.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef STONEYRIDGE_CHIP_H
+#define STONEYRIDGE_CHIP_H
+
+#include <stdint.h>
+
+struct soc_amd_stoneyridge_config
+{
+ u32 ide0_enable : 1;
+ u32 sata0_enable : 1;
+ u32 boot_switch_sata_ide : 1;
+ u32 hda_viddid;
+ u8 gpp_configuration;
+ u8 sd_mode;
+};
+
+typedef struct soc_amd_stoneyridge_config config_t;
+
+#endif /* STONEYRIDGE_CHIP_H */
diff --git a/src/soc/amd/stoneyridge/early_setup.c b/src/soc/amd/stoneyridge/early_setup.c
new file mode 100644
index 0000000..9bca381
--- /dev/null
+++ b/src/soc/amd/stoneyridge/early_setup.c
@@ -0,0 +1,334 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _STONEYRIDGE_EARLY_SETUP_C_
+#define _STONEYRIDGE_EARLY_SETUP_C_
+
+#include <assert.h>
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/acpi.h>
+#include <console/console.h>
+#include <reset.h>
+#include <arch/cpu.h>
+#include <cbmem.h>
+#include <soc/hudson.h>
+#include <soc/pci_devs.h>
+#include <Fch/Fch.h>
+#include <cpu/x86/msr.h>
+#include <delay.h>
+
+void configure_hudson_uart(void)
+{
+ u8 byte;
+
+ byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56 + CONFIG_UART_FOR_CONSOLE * 2);
+ byte |= 1 << 3;
+ write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56 + CONFIG_UART_FOR_CONSOLE * 2, byte);
+ byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62);
+ byte |= 1 << 3;
+ write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62, byte);
+ write8((void *)FCH_IOMUXx89_UART0_RTS_L_EGPIO137, 0);
+ write8((void *)FCH_IOMUXx8A_UART0_TXD_EGPIO138, 0);
+ write8((void *)FCH_IOMUXx8E_UART1_RTS_L_EGPIO142, 0);
+ write8((void *)FCH_IOMUXx8F_UART1_TXD_EGPIO143, 0);
+
+ udelay(2000);
+ write8((void *)0xFEDC6000 + 0x2000 * CONFIG_UART_FOR_CONSOLE + 0x88, 0x01); /* reset UART */
+}
+
+void hudson_pci_port80(void)
+{
+ u8 byte;
+ pci_devfn_t dev;
+
+ /* P2P Bridge */
+ dev = PCI_DEV(0, 0x14, 4);
+
+ /* Chip Control: Enable subtractive decoding */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= 1 << 5;
+ pci_write_config8(dev, 0x40, byte);
+
+ /* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */
+ byte = pci_read_config8(dev, 0x4B);
+ byte |= 1 << 7;
+ pci_write_config8(dev, 0x4B, byte);
+
+ /* The same IO Base and IO Limit here is meaningful because we set the
+ * bridge to be subtractive. During early setup stage, we have to make
+ * sure that data can go through port 0x80.
+ */
+ /* IO Base: 0xf000 */
+ byte = pci_read_config8(dev, 0x1C);
+ byte |= 0xF << 4;
+ pci_write_config8(dev, 0x1C, byte);
+
+ /* IO Limit: 0xf000 */
+ byte = pci_read_config8(dev, 0x1D);
+ byte |= 0xF << 4;
+ pci_write_config8(dev, 0x1D, byte);
+
+ /* PCI Command: Enable IO response */
+ byte = pci_read_config8(dev, 0x04);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x04, byte);
+
+ /* LPC controller */
+ dev = PCI_DEV(0, 0x14, 3);
+
+ byte = pci_read_config8(dev, 0x4A);
+ byte &= ~(1 << 5); /* disable lpc port 80 */
+ pci_write_config8(dev, 0x4A, byte);
+}
+
+void hudson_lpc_port80(void)
+{
+ u8 byte;
+ pci_devfn_t dev;
+
+ /* Enable LPC controller */
+ outb(0xEC, 0xCD6);
+ byte = inb(0xCD7);
+ byte |= 1;
+ outb(0xEC, 0xCD6);
+ outb(byte, 0xCD7);
+
+ /* Enable port 80 LPC decode in pci function 3 configuration space. */
+ dev = PCI_DEV(0, 0x14, 3);
+ byte = pci_read_config8(dev, 0x4a);
+ byte |= 1 << 5; /* enable port 80 */
+ pci_write_config8(dev, 0x4a, byte);
+}
+
+void hudson_lpc_decode(void)
+{
+ pci_devfn_t dev;
+ u32 tmp = 0;
+
+ /* Enable I/O decode to LPC bus */
+ dev = PCI_DEV(0, PCU_DEV, LPC_FUNC);
+ tmp = DECODE_ENABLE_PARALLEL_PORT0 | DECODE_ENABLE_PARALLEL_PORT2
+ | DECODE_ENABLE_PARALLEL_PORT4 | DECODE_ENABLE_SERIAL_PORT0
+ | DECODE_ENABLE_SERIAL_PORT1 | DECODE_ENABLE_SERIAL_PORT2
+ | DECODE_ENABLE_SERIAL_PORT3 | DECODE_ENABLE_SERIAL_PORT4
+ | DECODE_ENABLE_SERIAL_PORT5 | DECODE_ENABLE_SERIAL_PORT6
+ | DECODE_ENABLE_SERIAL_PORT7 | DECODE_ENABLE_AUDIO_PORT0
+ | DECODE_ENABLE_AUDIO_PORT1 | DECODE_ENABLE_AUDIO_PORT2
+ | DECODE_ENABLE_AUDIO_PORT3 | DECODE_ENABLE_MSS_PORT2
+ | DECODE_ENABLE_MSS_PORT3 | DECODE_ENABLE_FDC_PORT0
+ | DECODE_ENABLE_FDC_PORT1 | DECODE_ENABLE_GAME_PORT
+ | DECODE_ENABLE_KBC_PORT | DECODE_ENABLE_ACPIUC_PORT
+ | DECODE_ENABLE_ADLIB_PORT;
+
+ pci_write_config32(dev, LPC_IO_PORT_DECODE_ENABLE, tmp);
+}
+
+static void enable_wideio(uint8_t port, uint16_t size)
+{
+ uint32_t wideio_enable[] = {
+ LPC_WIDEIO0_ENABLE,
+ LPC_WIDEIO1_ENABLE,
+ LPC_WIDEIO2_ENABLE
+ };
+ uint32_t alt_wideio_enable[] = {
+ LPC_ALT_WIDEIO0_ENABLE,
+ LPC_ALT_WIDEIO1_ENABLE,
+ LPC_ALT_WIDEIO2_ENABLE
+ };
+ pci_devfn_t dev = PCI_DEV(0, PCU_DEV, LPC_FUNC);
+ uint32_t tmp;
+
+ /* Only allow port 0-2 */
+ assert(port <= ARRAY_SIZE(wideio_enable));
+
+ if (size == 16) {
+ tmp = pci_read_config32(dev, LPC_ALT_WIDEIO_RANGE_ENABLE);
+ tmp |= alt_wideio_enable[port];
+ pci_write_config32(dev, LPC_ALT_WIDEIO_RANGE_ENABLE, tmp);
+ } else { /* 512 */
+ tmp = pci_read_config32(dev, LPC_ALT_WIDEIO_RANGE_ENABLE);
+ tmp &= ~alt_wideio_enable[port];
+ pci_write_config32(dev, LPC_ALT_WIDEIO_RANGE_ENABLE, tmp);
+ }
+
+ /* Enable the range */
+ tmp = pci_read_config32(dev, LPC_IO_OR_MEM_DECODE_ENABLE);
+ tmp |= wideio_enable[port];
+ pci_write_config32(dev, LPC_IO_OR_MEM_DECODE_ENABLE, tmp);
+}
+
+/*
+ * lpc_wideio_window() may be called any point in romstage, but take
+ * care that AGESA doesn't overwrite the range this function used.
+ * The function checks if there is an empty range and if all ranges are
+ * used the function throws an assert. The function doesn't check for a
+ * duplicate range, for ranges that can be merged into a single
+ * range, or ranges that overlap.
+ *
+ * The developer is expected to ensure that there are no conflicts.
+ */
+static void lpc_wideio_window(uint16_t base, uint16_t size)
+{
+ pci_devfn_t dev = PCI_DEV(0, PCU_DEV, LPC_FUNC);
+ u32 tmp;
+
+ /* Support 512 or 16 bytes per range */
+ assert(size == 512 || size == 16);
+
+ /* Find and open Base Register and program it */
+ tmp = pci_read_config32(dev, LPC_WIDEIO_GENERIC_PORT);
+
+ if ((tmp & 0xFFFF) == 0) { /* WIDEIO0 */
+ tmp |= base;
+ pci_write_config32(dev, LPC_WIDEIO_GENERIC_PORT, tmp);
+ enable_wideio(0, size);
+ } else if ((tmp & 0xFFFF0000) == 0) { /* WIDEIO1 */
+ tmp |= (base << 16);
+ pci_write_config32(dev, LPC_WIDEIO_GENERIC_PORT, tmp);
+ enable_wideio(1, size);
+ } else { /* Check WIDEIO2 register */
+ tmp = pci_read_config32(dev, LPC_WIDEIO2_GENERIC_PORT);
+ if ((tmp & 0xFFFF) == 0) { /* WIDEIO2 */
+ tmp |= base;
+ pci_write_config32(dev, LPC_WIDEIO2_GENERIC_PORT, tmp);
+ enable_wideio(2, size);
+ } else { /* All WIDEIO locations used*/
+ assert(0);
+ }
+ }
+}
+
+void lpc_wideio_512_window(uint16_t base)
+{
+ assert(IS_ALIGNED(base, 512));
+ lpc_wideio_window(base, 512);
+}
+
+void lpc_wideio_16_window(uint16_t base)
+{
+ assert(IS_ALIGNED(base, 16));
+ lpc_wideio_window(base, 16);
+}
+
+int s3_save_nvram_early(u32 dword, int size, int nvram_pos)
+{
+ int i;
+ printk(BIOS_DEBUG, "Writing %x of size %d to nvram pos: %d\n", dword, size, nvram_pos);
+
+ for (i = 0; i < size; i++) {
+ outb(nvram_pos, BIOSRAM_INDEX);
+ outb((dword >>(8 * i)) & 0xff , BIOSRAM_DATA);
+ nvram_pos++;
+ }
+
+ return nvram_pos;
+}
+
+int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos)
+{
+ u32 data = *old_dword;
+ int i;
+ for (i = 0; i < size; i++) {
+ outb(nvram_pos, BIOSRAM_INDEX);
+ data &= ~(0xff << (i * 8));
+ data |= inb(BIOSRAM_DATA) << (i *8);
+ nvram_pos++;
+ }
+ *old_dword = data;
+ printk(BIOS_DEBUG, "Loading %x of size %d to nvram pos:%d\n", *old_dword, size,
+ nvram_pos-size);
+ return nvram_pos;
+}
+
+void hudson_clk_output_48Mhz(void)
+{
+ u32 data, *memptr;
+
+ /*
+ * Enable the X14M_25M_48M_OSC pin and leaving it at it's default so
+ * 48Mhz will be on ball AP13 (FT3b package)
+ */
+ memptr = (u32 *)(ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40 );
+ data = *memptr;
+
+ /* clear the OSCOUT1_ClkOutputEnb to enable the 48 Mhz clock */
+ data &= (u32)~(1<<2);
+ *memptr = data;
+}
+
+static uintptr_t hudson_spibase(void)
+{
+ /* Make sure the base address is predictable */
+ device_t dev = PCI_DEV(0, 0x14, 3);
+
+ u32 base = pci_read_config32(dev, SPIROM_BASE_ADDRESS_REGISTER)
+ & 0xfffffff0;
+ if (!base){
+ base = SPI_BASE_ADDRESS;
+ pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER, base
+ | SPI_ROM_ENABLE);
+ /* PCI_COMMAND_MEMORY is read-only and enabled. */
+ }
+ return (uintptr_t)base;
+}
+
+void hudson_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm)
+{
+ uintptr_t base = hudson_spibase();
+ write16((void *)base + SPI100_SPEED_CONFIG,
+ (norm << SPI_NORM_SPEED_NEW_SH) |
+ (fast << SPI_FAST_SPEED_NEW_SH) |
+ (alt << SPI_ALT_SPEED_NEW_SH) |
+ (tpm << SPI_TPM_SPEED_NEW_SH));
+ write16((void *)base + SPI100_ENABLE, SPI_USE_SPI100);
+}
+
+void hudson_disable_4dw_burst(void)
+{
+ uintptr_t base = hudson_spibase();
+ write16((void *)base + SPI100_HOST_PREF_CONFIG,
+ read16((void *)base + SPI100_HOST_PREF_CONFIG)
+ & ~SPI_RD4DW_EN_HOST);
+}
+
+/* Hudson 1-3 only. For Hudson 1, call with fast=1 */
+void hudson_set_readspeed(u16 norm, u16 fast)
+{
+ uintptr_t base = hudson_spibase();
+ write16((void *)base + SPI_CNTRL1, (read16((void *)base + SPI_CNTRL1)
+ & ~SPI_CNTRL1_SPEED_MASK)
+ | (norm << SPI_NORM_SPEED_SH)
+ | (fast << SPI_FAST_SPEED_SH));
+}
+
+void hudson_read_mode(u32 mode)
+{
+ uintptr_t base = hudson_spibase();
+ write32((void *)base + SPI_CNTRL0,
+ (read32((void *)base + SPI_CNTRL0)
+ & ~SPI_READ_MODE_MASK) | mode);
+}
+
+void hudson_tpm_decode_spi(void)
+{
+ device_t dev = PCI_DEV(0, 0x14, 3); /* LPC device */
+
+ u32 spibase = pci_read_config32(dev, SPIROM_BASE_ADDRESS_REGISTER);
+ pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER, spibase
+ | ROUTE_TPM_2_SPI);
+}
+
+#endif
diff --git a/src/soc/amd/stoneyridge/enable_usbdebug.c b/src/soc/amd/stoneyridge/enable_usbdebug.c
new file mode 100644
index 0000000..dc09b85
--- /dev/null
+++ b/src/soc/amd/stoneyridge/enable_usbdebug.c
@@ -0,0 +1,59 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+// Use simple device model for this file even in ramstage
+#define __SIMPLE_DEVICE__
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <device/pci_ehci.h>
+#include <device/pci_def.h>
+#include <soc/hudson.h>
+
+#define DEBUGPORT_MISC_CONTROL 0x80
+
+pci_devfn_t pci_ehci_dbg_dev(unsigned int hcd_idx)
+{
+ if (hcd_idx == 3)
+ return PCI_DEV(0, 0x16, 0);
+ else if (hcd_idx == 2)
+ return PCI_DEV(0, 0x13, 0);
+ else
+ return PCI_DEV(0, 0x12, 0);
+}
+
+void pci_ehci_dbg_set_port(pci_devfn_t dev, unsigned int port)
+{
+ u8 *base_regs = pci_ehci_base_regs(dev);
+ u32 reg32;
+
+ /* Write the port number to DEBUGPORT_MISC_CONTROL[31:28]. */
+ reg32 = read32(base_regs + DEBUGPORT_MISC_CONTROL);
+ reg32 &= ~(0xf << 28);
+ reg32 |= (port << 28);
+ reg32 |= (1 << 27); /* Enable Debug Port port number remapping. */
+ write32(base_regs + DEBUGPORT_MISC_CONTROL, reg32);
+}
+
+
+void pci_ehci_dbg_enable(pci_devfn_t dev, unsigned long base)
+{
+ /* Enable all of the USB controllers */
+ outb(0xEF, PM_INDEX);
+ outb(0x7F, PM_DATA);
+
+ pci_write_config32(dev, EHCI_BAR_INDEX, base);
+ pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+}
diff --git a/src/soc/amd/stoneyridge/fadt.c b/src/soc/amd/stoneyridge/fadt.c
new file mode 100644
index 0000000..9e5a795
--- /dev/null
+++ b/src/soc/amd/stoneyridge/fadt.c
@@ -0,0 +1,207 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <soc/hudson.h>
+#include <soc/smi.h>
+
+#if CONFIG_STONEYRIDGE_LEGACY_FREE
+ #define FADT_BOOT_ARCH ACPI_FADT_LEGACY_FREE
+#else
+ #define FADT_BOOT_ARCH (ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042)
+#endif
+
+#ifndef FADT_PM_PROFILE
+ #define FADT_PM_PROFILE PM_UNSPECIFIED
+#endif
+
+/*
+ * Reference section 5.2.9 Fixed ACPI Description Table (FADT)
+ * in the ACPI 3.0b specification.
+ */
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+
+ printk(BIOS_DEBUG, "pm_base: 0x%04x\n", STONEYRIDGE_ACPI_IO_BASE);
+
+ /* Prepare the header */
+ memset((void *)fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = sizeof(acpi_fadt_t);
+ header->revision = ACPI_FADT_REV_ACPI_3_0;
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+ header->asl_compiler_revision = 0;
+
+ fadt->firmware_ctrl = (u32) facs;
+ fadt->dsdt = (u32) dsdt;
+ fadt->model = 0; /* reserved, should be 0 ACPI 3.0 */
+ fadt->preferred_pm_profile = FADT_PM_PROFILE;
+ fadt->sci_int = 9; /* HUDSON - IRQ 09 - ACPI SCI */
+
+ if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) {
+ fadt->smi_cmd = ACPI_SMI_CTL_PORT;
+ fadt->acpi_enable = ACPI_SMI_CMD_ENABLE;
+ fadt->acpi_disable = ACPI_SMI_CMD_DISABLE;
+ fadt->s4bios_req = 0; /* Not supported */
+ fadt->pstate_cnt = 0; /* Not supported */
+ fadt->cst_cnt = 0; /* Not supported */
+ outl(0x0, ACPI_PM1_CNT_BLK); /* clear SCI_EN */
+ } else {
+ fadt->smi_cmd = 0; /* disable system management mode */
+ fadt->acpi_enable = 0; /* unused if SMI_CMD = 0 */
+ fadt->acpi_disable = 0; /* unused if SMI_CMD = 0 */
+ fadt->s4bios_req = 0; /* unused if SMI_CMD = 0 */
+ fadt->pstate_cnt = 0; /* unused if SMI_CMD = 0 */
+ fadt->cst_cnt = 0x00; /* unused if SMI_CMD = 0 */
+ outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */
+ }
+
+ fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK;
+ fadt->pm1b_evt_blk = 0x0000;
+ fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK;
+ fadt->pm1b_cnt_blk = 0x0000;
+ fadt->pm2_cnt_blk = 0x0000;
+ fadt->pm_tmr_blk = ACPI_PM_TMR_BLK;
+ fadt->gpe0_blk = ACPI_GPE0_BLK;
+ fadt->gpe1_blk = 0x0000; /* No gpe1 block in hudson */
+
+ fadt->pm1_evt_len = 4; /* 32 bits */
+ fadt->pm1_cnt_len = 2; /* 16 bits */
+ fadt->pm2_cnt_len = 0;
+ fadt->pm_tmr_len = 4; /* 32 bits */
+ fadt->gpe0_blk_len = 8; /* 64 bits */
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+
+ fadt->p_lvl2_lat = ACPI_FADT_C2_NOT_SUPPORTED;
+ fadt->p_lvl3_lat = ACPI_FADT_C3_NOT_SUPPORTED;
+ fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */
+ fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */
+ fadt->duty_offset = 1; /* CLK_VAL bits 3:1 */
+ fadt->duty_width = 3; /* CLK_VAL bits 3:1 */
+ fadt->day_alrm = 0; /* 0x7d these have to be */
+ fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */
+ fadt->century = 0; /* 0x7f to make rtc alarm work */
+ fadt->iapc_boot_arch = FADT_BOOT_ARCH; /* See table 5-10 */
+ fadt->res2 = 0; /* reserved, MUST be 0 ACPI 3.0 */
+ fadt->flags = ACPI_FADT_WBINVD | /* See table 5-10 ACPI 3.0a spec */
+ ACPI_FADT_C1_SUPPORTED |
+ ACPI_FADT_SLEEP_BUTTON |
+ ACPI_FADT_S4_RTC_WAKE |
+ ACPI_FADT_32BIT_TIMER |
+ ACPI_FADT_RESET_REGISTER |
+ ACPI_FADT_PCI_EXPRESS_WAKE |
+ ACPI_FADT_PLATFORM_CLOCK |
+ ACPI_FADT_S4_RTC_VALID |
+ ACPI_FADT_REMOTE_POWER_ON;
+
+ /* Format is from 5.2.3.1: Generic Address Structure */
+ /* reset_reg: see section 4.7.3.6 ACPI 3.0a spec */
+ /* 8 bit write of value 0x06 to 0xCF9 in IO space */
+ fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->reset_reg.bit_width = 8;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
+ fadt->reset_reg.addrl = 0xcf9;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 6;
+
+ fadt->res3 = 0; /* reserved, MUST be 0 ACPI 3.0 */
+ fadt->res4 = 0; /* reserved, MUST be 0 ACPI 3.0 */
+ fadt->res5 = 0; /* reserved, MUST be 0 ACPI 3.0 */
+
+ fadt->x_firmware_ctl_l = 0; /* set to 0 if firmware_ctrl is used */
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (u32) dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS;
+ fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm1b_evt_blk.bit_width = 0;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.access_size = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+
+ fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.access_size = 0;
+ fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm1b_cnt_blk.bit_width = 0;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.access_size = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ /*
+ * Note: Under this current AMD C state implementation, this is no longer
+ * used and should not be reported to OS.
+ */
+ fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm2_cnt_blk.bit_width = 0;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
+ fadt->x_pm2_cnt_blk.addrl = 0;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+
+ fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+ fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+
+ fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_gpe0_blk.bit_width = 64; /* EventStatus + Event Enable */
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+ fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+
+ fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.access_size = 0;
+ fadt->x_gpe1_blk.addrl = 0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+}
diff --git a/src/soc/amd/stoneyridge/gpio.c b/src/soc/amd/stoneyridge/gpio.c
new file mode 100644
index 0000000..dcef11d
--- /dev/null
+++ b/src/soc/amd/stoneyridge/gpio.c
@@ -0,0 +1,28 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Google Inc.
+ * Copyright (C) 2015 Intel Corporation
+ * Copyright (C) 2017 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+#include <soc/gpio.h>
+
+int gpio_get(gpio_t gpio_num)
+{
+ uint32_t reg;
+
+ reg = read32((void*)(uintptr_t)gpio_num);
+
+ return !!(reg & GPIO_PIN_STS);
+}
diff --git a/src/soc/amd/stoneyridge/hda.c b/src/soc/amd/stoneyridge/hda.c
new file mode 100644
index 0000000..2623236
--- /dev/null
+++ b/src/soc/amd/stoneyridge/hda.c
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include <delay.h>
+#include <soc/hudson.h>
+
+static const unsigned short pci_device_ids[] = {
+ PCI_DEVICE_ID_AMD_SB900_HDA,
+ PCI_DEVICE_ID_AMD_CZ_HDA,
+ 0
+};
+
+static void hda_init(struct device *dev)
+{
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations hda_audio_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = hda_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver hdaaudio_driver __pci_driver = {
+ .ops = &hda_audio_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .devices = pci_device_ids,
+};
diff --git a/src/soc/amd/stoneyridge/hudson.c b/src/soc/amd/stoneyridge/hudson.c
new file mode 100644
index 0000000..8307014
--- /dev/null
+++ b/src/soc/amd/stoneyridge/hudson.c
@@ -0,0 +1,132 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+
+#include <arch/io.h>
+#include <arch/acpi.h>
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <cbmem.h>
+#include <soc/hudson.h>
+#include <soc/smbus.h>
+#include <soc/smi.h>
+#if IS_ENABLED(CONFIG_STONEYRIDGE_IMC_FWM)
+#include <fchec.h>
+#endif
+
+
+int acpi_get_sleep_type(void)
+{
+ u16 tmp = inw(ACPI_PM1_CNT_BLK);
+ tmp = ((tmp & (7 << 10)) >> 10);
+ return (int)tmp;
+}
+
+void pm_write8(u8 reg, u8 value)
+{
+ write8((void *)(PM_MMIO_BASE + reg), value);
+}
+
+u8 pm_read8(u8 reg)
+{
+ return read8((void *)(PM_MMIO_BASE + reg));
+}
+
+void pm_write16(u8 reg, u16 value)
+{
+ write16((void *)(PM_MMIO_BASE + reg), value);
+}
+
+u16 pm_read16(u16 reg)
+{
+ return read16((void *)(PM_MMIO_BASE + reg));
+}
+
+void hudson_enable(device_t dev)
+{
+ printk(BIOS_DEBUG, "hudson_enable()\n");
+ switch (dev->path.pci.devfn) {
+ case (0x14 << 3) | 7: /* 0:14.7 SD */
+ if (dev->enabled == 0) {
+ // read the VENDEV ID
+ device_t sd_dev = dev_find_slot( 0, PCI_DEVFN( 0x14, 7));
+ u32 sd_device_id = pci_read_config32( sd_dev, 0) >> 16;
+ /* turn off the SDHC controller in the PM reg */
+ u8 reg8;
+ if (sd_device_id == PCI_DEVICE_ID_AMD_HUDSON_SD) {
+ reg8 = pm_read8(PM_HUD_SD_FLASH_CTRL);
+ reg8 &= ~BIT(0);
+ pm_write8(PM_HUD_SD_FLASH_CTRL, reg8);
+ }
+ else if (sd_device_id == PCI_DEVICE_ID_AMD_YANGTZE_SD) {
+ reg8 = pm_read8(PM_YANG_SD_FLASH_CTRL);
+ reg8 &= ~BIT(0);
+ pm_write8(PM_YANG_SD_FLASH_CTRL, reg8);
+ }
+ /* remove device 0:14.7 from PCI space */
+ reg8 = pm_read8(PM_MANUAL_RESET);
+ reg8 &= ~BIT(6);
+ pm_write8(PM_MANUAL_RESET, reg8);
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static void hudson_init_acpi_ports(void)
+{
+ /* We use some of these ports in SMM regardless of whether or not
+ * ACPI tables are generated. Enable these ports indiscriminately.
+ */
+
+ pm_write16(PM_EVT_BLK, ACPI_PM_EVT_BLK);
+ pm_write16(PM1_CNT_BLK, ACPI_PM1_CNT_BLK);
+ pm_write16(PM_TMR_BLK, ACPI_PM_TMR_BLK);
+ pm_write16(PM_GPE0_BLK, ACPI_GPE0_BLK);
+ /* CpuControl is in \_PR.CP00, 6 bytes */
+ pm_write16(PM_CPU_CTRL, ACPI_CPU_CONTROL);
+
+ if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) {
+ pm_write16(PM_ACPI_SMI_CMD, ACPI_SMI_CTL_PORT);
+ hudson_enable_acpi_cmd_smi();
+ } else {
+ pm_write16(PM_ACPI_SMI_CMD, 0);
+ }
+
+ /* AcpiDecodeEnable, When set, SB uses the contents of the PM registers
+ * at index 60-6B to decode ACPI I/O address. AcpiSmiEn & SmiCmdEn
+ */
+ pm_write8(PM_ACPI_CONF, BIT(0) | BIT(1) | BIT(4) | BIT(2));
+}
+
+void hudson_init(void *chip_info)
+{
+ hudson_init_acpi_ports();
+}
+
+void hudson_final(void *chip_info)
+{
+#if IS_ENABLED(CONFIG_STONEYRIDGE_IMC_FWM)
+ agesawrapper_fchecfancontrolservice();
+#if !IS_ENABLED(CONFIG_ACPI_ENABLE_THERMAL_ZONE)
+ enable_imc_thermal_zone();
+#endif
+#endif
+}
diff --git a/src/soc/amd/stoneyridge/ide.c b/src/soc/amd/stoneyridge/ide.c
new file mode 100644
index 0000000..4923208
--- /dev/null
+++ b/src/soc/amd/stoneyridge/ide.c
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <soc/hudson.h>
+
+static void ide_init(struct device *dev)
+{
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations ide_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = ide_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver ide_driver __pci_driver = {
+ .ops = &ide_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_SB900_IDE,
+};
diff --git a/src/soc/amd/stoneyridge/imc.c b/src/soc/amd/stoneyridge/imc.c
new file mode 100644
index 0000000..b4e1d9d
--- /dev/null
+++ b/src/soc/amd/stoneyridge/imc.c
@@ -0,0 +1,101 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define __SIMPLE_DEVICE__
+
+#include <soc/imc.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <delay.h>
+#include <Porting.h>
+#include <AGESA.h>
+#include <Lib/amdlib.h>
+#include <Proc/Fch/Common/FchCommonCfg.h>
+#include <Proc/Fch/Fch.h>
+#include <Proc/Fch/FchPlatform.h>
+
+#define VACPI_MMIO_VBASE ((u8 *)ACPI_MMIO_BASE)
+
+void imc_reg_init(void)
+{
+ u8 reg8;
+ /* Init Power Management Block 2 (PM2) Registers.
+ * Check BKDG for AMD Family 16h for details. */
+ write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x00), 0x06);
+ write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x01), 0x06);
+ write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x02), 0xf7);
+ write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x03), 0xff);
+ write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x04), 0xff);
+
+ write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x10), 0x06);
+ write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x11), 0x06);
+ write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x12), 0xf7);
+ write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x13), 0xff);
+ write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x14), 0xff);
+
+ reg8 = pci_read_config8(PCI_DEV(0, 0x18, 0x3), 0x1E4);
+ reg8 &= 0x8F;
+ reg8 |= 0x10;
+ pci_write_config8(PCI_DEV(0, 0x18, 0x3), 0x1E4, reg8);
+}
+
+#ifndef __PRE_RAM__
+void enable_imc_thermal_zone(void)
+{
+ AMD_CONFIG_PARAMS StdHeader;
+ UINT8 FunNum;
+ UINT8 regs[9];
+ int i;
+
+ regs[0] = 0;
+ regs[1] = 0;
+ FunNum = Fun_80;
+ for (i = 0; i <= 1; i++)
+ WriteECmsg(MSG_REG0 + i, AccessWidth8, ®s[i], &StdHeader);
+ WriteECmsg(MSG_SYS_TO_IMC, AccessWidth8, &FunNum, &StdHeader);
+ WaitForEcLDN9MailboxCmdAck(&StdHeader);
+
+ for (i = 2; i <= 9; i++)
+ ReadECmsg(MSG_REG0 + i, AccessWidth8, ®s[i], &StdHeader);
+
+ /* enable thermal zone 0 */
+ regs[2] |= 1;
+ regs[0] = 0;
+ regs[1] = 0;
+ FunNum = Fun_81;
+ for (i = 0; i <= 9; i++)
+ WriteECmsg(MSG_REG0 + i, AccessWidth8, ®s[i], &StdHeader);
+ WriteECmsg(MSG_SYS_TO_IMC, AccessWidth8, &FunNum, &StdHeader);
+ WaitForEcLDN9MailboxCmdAck(&StdHeader);
+}
+#endif
+
+/* Bettong Hardware Monitor Fan Control
+ * Hardware limitation:
+ * HWM will fail to read the input temperature via I2C if other
+ * software switches the I2C address. AMD recommends using IMC
+ * to control fans, instead of HWM.
+ */
+void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+{
+ /* Enable IMC fan control. the recommand way */
+ imc_reg_init();
+
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */
+
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+}
diff --git a/src/soc/amd/stoneyridge/include/amd_pci_int_defs.h b/src/soc/amd/stoneyridge/include/amd_pci_int_defs.h
new file mode 100644
index 0000000..361c06f
--- /dev/null
+++ b/src/soc/amd/stoneyridge/include/amd_pci_int_defs.h
@@ -0,0 +1,75 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef AMD_PCI_INT_DEFS_H
+#define AMD_PCI_INT_DEFS_H
+
+/*
+ * PIRQ and device routing - these define the index
+ * into the FCH PCI_INTR 0xC00/0xC01 interrupt
+ * routing table
+ */
+
+#define PIRQ_NC 0x1F /* Not Used */
+#define PIRQ_A 0x00 /* INT A */
+#define PIRQ_B 0x01 /* INT B */
+#define PIRQ_C 0x02 /* INT C */
+#define PIRQ_D 0x03 /* INT D */
+#define PIRQ_E 0x04 /* INT E */
+#define PIRQ_F 0x05 /* INT F */
+#define PIRQ_G 0x06 /* INT G */
+#define PIRQ_H 0x07 /* INT H */
+#define PIRQ_MISC 0x08 /* Miscellaneous IRQ Settings - See FCH Spec */
+#define PIRQ_MISC0 0x09 /* Miscellaneous0 IRQ Settings */
+#define PIRQ_MISC1 0x0A /* Miscellaneous1 IRQ Settings */
+#define PIRQ_MISC2 0x0B /* Miscellaneous2 IRQ Settings */
+#define PIRQ_SIRQA 0x0C /* Serial IRQ INTA */
+#define PIRQ_SIRQB 0x0D /* Serial IRQ INTB */
+#define PIRQ_SIRQC 0x0E /* Serial IRQ INTC */
+#define PIRQ_SIRQD 0x0F /* Serial IRQ INTD */
+#define PIRQ_SCI 0x10 /* SCI IRQ */
+#define PIRQ_SMBUS 0x11 /* SMBUS 14h.0 */
+#define PIRQ_ASF 0x12 /* ASF */
+#define PIRQ_HDA 0x13 /* HDA 14h.2 */
+#define PIRQ_FC 0x14 /* FC */
+#define PIRQ_GEC 0x15 /* GEC */
+#define PIRQ_PMON 0x16 /* Performance Monitor */
+#define PIRQ_SD 0x17 /* SD */
+#define PIRQ_IMC0 0x20 /* IMC INT0 */
+#define PIRQ_IMC1 0x21 /* IMC INT1 */
+#define PIRQ_IMC2 0x22 /* IMC INT2 */
+#define PIRQ_IMC3 0x23 /* IMC INT3 */
+#define PIRQ_IMC4 0x24 /* IMC INT4 */
+#define PIRQ_IMC5 0x25 /* IMC INT5 */
+#define PIRQ_OHCI1 0x30 /* USB OHCI 12h.0 */
+#define PIRQ_EHCI1 0x31 /* USB EHCI 12h.2 */
+#define PIRQ_OHCI2 0x32 /* USB OHCI 13h.0 */
+#define PIRQ_EHCI2 0x33 /* USB EHCI 13h.2 */
+#define PIRQ_OHCI3 0x34 /* USB OHCI 16h.0 */
+#define PIRQ_EHCI3 0x35 /* USB EHCI 16h.2 */
+#define PIRQ_OHCI4 0x36 /* USB OHCI 14h.5 */
+#define PIRQ_IDE 0x40 /* IDE 14h.1 */
+#define PIRQ_SATA 0x41 /* SATA 11h.0 */
+
+#define FCH_INT_TABLE_SIZE 0x76
+#define PIRQ_GPIO 0x62 /* GPIO Controller Interrupt */
+#define PIRQ_I2C0 0x70
+#define PIRQ_I2C1 0x71
+#define PIRQ_I2C2 0x72
+#define PIRQ_I2C3 0x73
+#define PIRQ_UART0 0x74
+#define PIRQ_UART1 0x75
+
+#endif /* AMD_PCI_INT_DEFS_H */
diff --git a/src/soc/amd/stoneyridge/include/amd_pci_int_types.h b/src/soc/amd/stoneyridge/include/amd_pci_int_types.h
new file mode 100644
index 0000000..30ab0d4
--- /dev/null
+++ b/src/soc/amd/stoneyridge/include/amd_pci_int_types.h
@@ -0,0 +1,32 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef AMD_PCI_INT_TYPES_H
+#define AMD_PCI_INT_TYPES_H
+
+const char * intr_types[] = {
+ [0x00] = "INTA#\t", "INTB#\t", "INTC#\t", "INTD#\t", "INTE#\t", "INTF#\t", "INTG#\t", "INTH#\t",
+ [0x08] = "Misc\t", "Misc0\t", "Misc1\t", "Misc2\t", "Ser IRQ INTA", "Ser IRQ INTB", "Ser IRQ INTC", "Ser IRQ INTD",
+ [0x10] = "SCI\t", "SMBUS0\t", "ASF\t", "HDA\t", "FC\t\t", "GEC\t", "PerMon\t", "SD\t\t",
+ [0x20] = "IMC INT0\t", "IMC INT1\t", "IMC INT2\t", "IMC INT3\t", "IMC INT4\t", "IMC INT5\t",
+ [0x30] = "Dev18.0 INTA", "Dev18.2 INTB", "Dev19.0 INTA", "Dev19.2 INTB", "Dev22.0 INTA", "Dev22.2 INTB", "Dev20.5 INTC",
+ [0x7F] = "RSVD\t",
+ [0x40] = "IDE\t", "SATA\t",
+ [0x50] = "GPPInt0\t", "GPPInt1\t", "GPPInt2\t", "GPPInt3\t",
+ [0x62] = "GPIO\t",
+ [0x70] = "I2C0\t", "I2C1\t", "I2C2\t","I2C3\t", "UART0\t", "UART1\t",
+};
+
+#endif /* AMD_PCI_INT_TYPES_H */
diff --git a/src/soc/amd/stoneyridge/include/soc/gpio.h b/src/soc/amd/stoneyridge/include/soc/gpio.h
new file mode 100644
index 0000000..22c0fba
--- /dev/null
+++ b/src/soc/amd/stoneyridge/include/soc/gpio.h
@@ -0,0 +1,131 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _STONEYRIDGE_GPIO_H_
+#define _STONEYRIDGE_GPIO_H_
+
+#include <soc/amd/common/amd_defs.h>
+#include <types.h>
+
+#define CROS_GPIO_DEVICE_NAME "AmdKern"
+
+#define GPIO_PIN_STS (1 << 16)
+#define GPIO_OUTPUT_VALUE (1 << 22)
+#define GPIO_OUTPUT_ENABLE (1 << 23)
+
+/* GPIO_0 - GPIO_62 */
+#define GPIO_BANK0_CONTROL (AMD_SB_ACPI_MMIO_ADDR + 0x1500)
+#define GPIO_0 (GPIO_BANK0_CONTROL + 0x00)
+#define GPIO_1 (GPIO_BANK0_CONTROL + 0x04)
+#define GPIO_2 (GPIO_BANK0_CONTROL + 0x08)
+#define GPIO_3 (GPIO_BANK0_CONTROL + 0x0C)
+#define GPIO_4 (GPIO_BANK0_CONTROL + 0x10)
+#define GPIO_5 (GPIO_BANK0_CONTROL + 0x14)
+#define GPIO_6 (GPIO_BANK0_CONTROL + 0x18)
+#define GPIO_7 (GPIO_BANK0_CONTROL + 0x1C)
+#define GPIO_8 (GPIO_BANK0_CONTROL + 0x20)
+#define GPIO_9 (GPIO_BANK0_CONTROL + 0x24)
+#define GPIO_10 (GPIO_BANK0_CONTROL + 0x28)
+#define GPIO_11 (GPIO_BANK0_CONTROL + 0x2C)
+#define GPIO_12 (GPIO_BANK0_CONTROL + 0x30)
+#define GPIO_13 (GPIO_BANK0_CONTROL + 0x34)
+#define GPIO_14 (GPIO_BANK0_CONTROL + 0x38)
+#define GPIO_15 (GPIO_BANK0_CONTROL + 0x3C)
+#define GPIO_16 (GPIO_BANK0_CONTROL + 0x40)
+#define GPIO_17 (GPIO_BANK0_CONTROL + 0x44)
+#define GPIO_18 (GPIO_BANK0_CONTROL + 0x48)
+#define GPIO_19 (GPIO_BANK0_CONTROL + 0x4C)
+#define GPIO_20 (GPIO_BANK0_CONTROL + 0x50)
+#define GPIO_21 (GPIO_BANK0_CONTROL + 0x54)
+#define GPIO_22 (GPIO_BANK0_CONTROL + 0x58)
+#define GPIO_23 (GPIO_BANK0_CONTROL + 0x5C)
+#define GPIO_24 (GPIO_BANK0_CONTROL + 0x60)
+#define GPIO_25 (GPIO_BANK0_CONTROL + 0x64)
+#define GPIO_26 (GPIO_BANK0_CONTROL + 0x68)
+#define GPIO_39 (GPIO_BANK0_CONTROL + 0x9C)
+#define GPIO_42 (GPIO_BANK0_CONTROL + 0xA8)
+
+/* GPIO_64 - GPIO_127 */
+#define GPIO_BANK1 (CONTROL AMD_SB_ACPI_MMIO_ADDR + 0x1600)
+#define GPIO_64 (GPIO_BANK1_CONTROL + 0x00)
+#define GPIO_65 (GPIO_BANK1_CONTROL + 0x04)
+#define GPIO_66 (GPIO_BANK1_CONTROL + 0x08)
+#define GPIO_67 (GPIO_BANK1_CONTROL + 0x0C)
+#define GPIO_68 (GPIO_BANK1_CONTROL + 0x10)
+#define GPIO_69 (GPIO_BANK1_CONTROL + 0x14)
+#define GPIO_70 (GPIO_BANK1_CONTROL + 0x18)
+#define GPIO_71 (GPIO_BANK1_CONTROL + 0x1C)
+#define GPIO_72 (GPIO_BANK1_CONTROL + 0x20)
+#define GPIO_74 (GPIO_BANK1_CONTROL + 0x28)
+#define GPIO_75 (GPIO_BANK1_CONTROL + 0x2C)
+#define GPIO_76 (GPIO_BANK1_CONTROL + 0x30)
+#define GPIO_84 (GPIO_BANK1_CONTROL + 0x50)
+#define GPIO_85 (GPIO_BANK1_CONTROL + 0x54)
+#define GPIO_86 (GPIO_BANK1_CONTROL + 0x58)
+#define GPIO_87 (GPIO_BANK1_CONTROL + 0x5C)
+#define GPIO_88 (GPIO_BANK1_CONTROL + 0x60)
+#define GPIO_89 (GPIO_BANK1_CONTROL + 0x64)
+#define GPIO_90 (GPIO_BANK1_CONTROL + 0x68)
+#define GPIO_91 (GPIO_BANK1_CONTROL + 0x6C)
+#define GPIO_92 (GPIO_BANK1_CONTROL + 0x70)
+#define GPIO_93 (GPIO_BANK1_CONTROL + 0x74)
+#define GPIO_95 (GPIO_BANK1_CONTROL + 0x7C)
+#define GPIO_96 (GPIO_BANK1_CONTROL + 0x80)
+#define GPIO_97 (GPIO_BANK1_CONTROL + 0x84)
+#define GPIO_98 (GPIO_BANK1_CONTROL + 0x88)
+#define GPIO_99 (GPIO_BANK1_CONTROL + 0x8C)
+#define GPIO_100 (GPIO_BANK1_CONTROL + 0x90)
+#define GPIO_101 (GPIO_BANK1_CONTROL + 0x94)
+#define GPIO_102 (GPIO_BANK1_CONTROL + 0x98)
+#define GPIO_113 (GPIO_BANK1_CONTROL + 0xC4)
+#define GPIO_114 (GPIO_BANK1_CONTROL + 0xC8)
+#define GPIO_115 (GPIO_BANK1_CONTROL + 0xCC)
+#define GPIO_116 (GPIO_BANK1_CONTROL + 0xD0)
+#define GPIO_117 (GPIO_BANK1_CONTROL + 0xD4)
+#define GPIO_118 (GPIO_BANK1_CONTROL + 0xD8)
+#define GPIO_119 (GPIO_BANK1_CONTROL + 0xDC)
+#define GPIO_120 (GPIO_BANK1_CONTROL + 0xE0)
+#define GPIO_121 (GPIO_BANK1_CONTROL + 0xE4)
+#define GPIO_122 (GPIO_BANK1_CONTROL + 0xE8)
+#define GPIO_126 (GPIO_BANK1_CONTROL + 0xF8)
+
+/* GPIO_128 - GPIO_183 */
+#define GPIO_BANK2_CONTROL (AMD_SB_ACPI_MMIO_ADDR + 0x1700)
+#define GPIO_129 (GPIO_BANK2_CONTROL + 0x04)
+#define GPIO_130 (GPIO_BANK2_CONTROL + 0x08)
+#define GPIO_131 (GPIO_BANK2_CONTROL + 0x0C)
+#define GPIO_132 (GPIO_BANK2_CONTROL + 0x10)
+#define GPIO_133 (GPIO_BANK2_CONTROL + 0x14)
+#define GPIO_134 (GPIO_BANK2_CONTROL + 0x18)
+#define GPIO_135 (GPIO_BANK2_CONTROL + 0x1C)
+#define GPIO_136 (GPIO_BANK2_CONTROL + 0x20)
+#define GPIO_137 (GPIO_BANK2_CONTROL + 0x24)
+#define GPIO_138 (GPIO_BANK2_CONTROL + 0x28)
+#define GPIO_139 (GPIO_BANK2_CONTROL + 0x2C)
+#define GPIO_140 (GPIO_BANK2_CONTROL + 0x30)
+#define GPIO_141 (GPIO_BANK2_CONTROL + 0x34)
+#define GPIO_142 (GPIO_BANK2_CONTROL + 0x38)
+#define GPIO_143 (GPIO_BANK2_CONTROL + 0x3C)
+#define GPIO_144 (GPIO_BANK2_CONTROL + 0x40)
+#define GPIO_145 (GPIO_BANK2_CONTROL + 0x44)
+#define GPIO_146 (GPIO_BANK2_CONTROL + 0x48)
+#define GPIO_147 (GPIO_BANK2_CONTROL + 0x4C)
+#define GPIO_148 (GPIO_BANK2_CONTROL + 0x50)
+
+typedef uint32_t gpio_t;
+
+int gpio_get(gpio_t gpio_num);
+
+#endif /* _STONEYRIDGE_GPIO_H_ */
diff --git a/src/soc/amd/stoneyridge/include/soc/hudson.h b/src/soc/amd/stoneyridge/include/soc/hudson.h
new file mode 100644
index 0000000..bfe506e
--- /dev/null
+++ b/src/soc/amd/stoneyridge/include/soc/hudson.h
@@ -0,0 +1,198 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef STONEYRIDGE_H
+#define STONEYRIDGE_H
+
+#include <arch/io.h>
+#include <types.h>
+#include <device/pci_ids.h>
+#include <device/device.h>
+#include "chip.h"
+
+/* Offsets from ACPI_MMIO_BASE
+ * This is defined by AGESA, but we don't include AGESA headers to avoid
+ * polluting the namespace.
+ */
+#define PM_MMIO_BASE 0xfed80300
+
+/* Power management index/data registers */
+#define BIOSRAM_INDEX 0xcd4
+#define BIOSRAM_DATA 0xcd5
+#define PM_INDEX 0xcd6
+#define PM_DATA 0xcd7
+#define PM2_INDEX 0xcd0
+#define PM2_DATA 0xcd1
+
+#define PM_ACPI_MMIO_EN 0x24
+#define PM_SERIRQ_CONF 0x54
+#define PM_EVT_BLK 0x60
+#define PM1_CNT_BLK 0x62
+#define PM_TMR_BLK 0x64
+#define PM_CPU_CTRL 0x66
+#define PM_GPE0_BLK 0x68
+#define PM_ACPI_SMI_CMD 0x6A
+#define PM_ACPI_CONF 0x74
+#define PM_PMIO_DEBUG 0xD2
+#define PM_MANUAL_RESET 0xD3
+#define PM_HUD_SD_FLASH_CTRL 0xE7
+#define PM_YANG_SD_FLASH_CTRL 0xE8
+#define PM_PCIB_CFG 0xEA
+
+#define STONEYRIDGE_ACPI_IO_BASE CONFIG_STONEYRIDGE_ACPI_IO_BASE
+#define ACPI_PM_EVT_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x00) /* 4 bytes */
+#define ACPI_PM1_CNT_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x04) /* 2 bytes */
+#define ACPI_PM_TMR_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK (STONEYRIDGE_ACPI_IO_BASE + 0x10) /* 8 bytes */
+#define ACPI_CPU_CONTROL (STONEYRIDGE_ACPI_IO_BASE + 0x08) /* 6 bytes */
+
+#define ACPI_SMI_CTL_PORT 0xb2
+#define ACPI_SMI_CMD_CST_CONTROL 0xde
+#define ACPI_SMI_CMD_PST_CONTROL 0xad
+#define ACPI_SMI_CMD_DISABLE 0xbe
+#define ACPI_SMI_CMD_ENABLE 0xef
+#define ACPI_SMI_CMD_S4_REQ 0xc0
+
+#define REV_STONEYRIDGE_A11 0x11
+#define REV_STONEYRIDGE_A12 0x12
+
+#define SPIROM_BASE_ADDRESS_REGISTER 0xA0
+#define ROUTE_TPM_2_SPI BIT(3)
+#define SPI_ROM_ENABLE 0x02
+#define SPI_BASE_ADDRESS 0xFEC10000
+
+#define LPC_IO_PORT_DECODE_ENABLE 0x44
+#define DECODE_ENABLE_PARALLEL_PORT0 BIT(0)
+#define DECODE_ENABLE_PARALLEL_PORT1 BIT(1)
+#define DECODE_ENABLE_PARALLEL_PORT2 BIT(2)
+#define DECODE_ENABLE_PARALLEL_PORT3 BIT(3)
+#define DECODE_ENABLE_PARALLEL_PORT4 BIT(4)
+#define DECODE_ENABLE_PARALLEL_PORT5 BIT(5)
+#define DECODE_ENABLE_SERIAL_PORT0 BIT(6)
+#define DECODE_ENABLE_SERIAL_PORT1 BIT(7)
+#define DECODE_ENABLE_SERIAL_PORT2 BIT(8)
+#define DECODE_ENABLE_SERIAL_PORT3 BIT(9)
+#define DECODE_ENABLE_SERIAL_PORT4 BIT(10)
+#define DECODE_ENABLE_SERIAL_PORT5 BIT(11)
+#define DECODE_ENABLE_SERIAL_PORT6 BIT(12)
+#define DECODE_ENABLE_SERIAL_PORT7 BIT(13)
+#define DECODE_ENABLE_AUDIO_PORT0 BIT(14)
+#define DECODE_ENABLE_AUDIO_PORT1 BIT(15)
+#define DECODE_ENABLE_AUDIO_PORT2 BIT(16)
+#define DECODE_ENABLE_AUDIO_PORT3 BIT(17)
+#define DECODE_ENABLE_MIDI_PORT0 BIT(18)
+#define DECODE_ENABLE_MIDI_PORT1 BIT(19)
+#define DECODE_ENABLE_MIDI_PORT2 BIT(20)
+#define DECODE_ENABLE_MIDI_PORT3 BIT(21)
+#define DECODE_ENABLE_MSS_PORT0 BIT(22)
+#define DECODE_ENABLE_MSS_PORT1 BIT(23)
+#define DECODE_ENABLE_MSS_PORT2 BIT(24)
+#define DECODE_ENABLE_MSS_PORT3 BIT(25)
+#define DECODE_ENABLE_FDC_PORT0 BIT(26)
+#define DECODE_ENABLE_FDC_PORT1 BIT(27)
+#define DECODE_ENABLE_GAME_PORT BIT(28)
+#define DECODE_ENABLE_KBC_PORT BIT(29)
+#define DECODE_ENABLE_ACPIUC_PORT BIT(30)
+#define DECODE_ENABLE_ADLIB_PORT BIT(31)
+
+#define LPC_IO_OR_MEM_DECODE_ENABLE 0x48
+#define LPC_WIDEIO2_ENABLE BIT(25)
+#define LPC_WIDEIO1_ENABLE BIT(24)
+#define LPC_WIDEIO0_ENABLE BIT(2)
+
+#define LPC_WIDEIO_GENERIC_PORT 0x64
+
+#define LPC_ALT_WIDEIO_RANGE_ENABLE 0x74
+#define LPC_ALT_WIDEIO2_ENABLE BIT(3)
+#define LPC_ALT_WIDEIO1_ENABLE BIT(2)
+#define LPC_ALT_WIDEIO0_ENABLE BIT(0)
+
+#define LPC_WIDEIO2_GENERIC_PORT 0x90
+
+#define SPI_CNTRL0 0x00
+#define SPI_READ_MODE_MASK (BIT(30) | BIT(29) | BIT(18))
+/* Nominal is 16.7MHz on older devices, 33MHz on newer */
+#define SPI_READ_MODE_NOM 0x00000000
+#define SPI_READ_MODE_DUAL112 ( BIT(29) )
+#define SPI_READ_MODE_QUAD114 ( BIT(29) | BIT(18))
+#define SPI_READ_MODE_DUAL122 (BIT(30) )
+#define SPI_READ_MODE_QUAD144 (BIT(30) | BIT(18))
+#define SPI_READ_MODE_NORMAL66 (BIT(30) | BIT(29) )
+/* Nominal and SPI_READ_MODE_FAST_HUDSON1 are the only valid choices for H1 */
+#define SPI_READ_MODE_FAST_HUDSON1 ( BIT(18))
+#define SPI_READ_MODE_FAST (BIT(30) | BIT(29) | BIT(18))
+#define SPI_ARB_ENABLE BIT(19)
+
+#define SPI_CNTRL1 0x0c
+/* Use SPI_SPEED_16M-SPI_SPEED_66M below for hudson and bolton */
+#define SPI_CNTRL1_SPEED_MASK (BIT(15) | BIT(14) | BIT(13) | BIT(12))
+#define SPI_NORM_SPEED_SH 12
+#define SPI_FAST_SPEED_SH 8
+
+#define SPI100_ENABLE 0x20
+#define SPI_USE_SPI100 BIT(0)
+
+#define SPI100_SPEED_CONFIG 0x22
+#define SPI_SPEED_66M (0x0)
+#define SPI_SPEED_33M ( BIT(0))
+#define SPI_SPEED_22M ( BIT(1) )
+#define SPI_SPEED_16M ( BIT(1) | BIT(0))
+#define SPI_SPEED_100M (BIT(2) )
+#define SPI_SPEED_800K (BIT(2) | BIT(0))
+#define SPI_NORM_SPEED_NEW_SH 12
+#define SPI_FAST_SPEED_NEW_SH 8
+#define SPI_ALT_SPEED_NEW_SH 4
+#define SPI_TPM_SPEED_NEW_SH 0
+
+#define SPI100_HOST_PREF_CONFIG 0x2c
+#define SPI_RD4DW_EN_HOST BIT(15)
+
+static inline int hudson_sata_enable(void)
+{
+ /* True if IDE or AHCI. */
+ return (CONFIG_STONEYRIDGE_SATA_MODE == 0) || (CONFIG_STONEYRIDGE_SATA_MODE == 2);
+}
+
+static inline int hudson_ide_enable(void)
+{
+ /* True if IDE or LEGACY IDE. */
+ return (CONFIG_STONEYRIDGE_SATA_MODE == 0) || (CONFIG_STONEYRIDGE_SATA_MODE == 3);
+}
+
+void configure_hudson_uart(void);
+void hudson_clk_output_48Mhz(void);
+void hudson_disable_4dw_burst(void);
+void hudson_enable(device_t dev);
+void hudson_final(void *chip_info);
+void hudson_init(void *chip_info);
+void hudson_lpc_port80(void);
+void hudson_lpc_decode(void);
+void hudson_pci_port80(void);
+void hudson_read_mode(u32 mode);
+void hudson_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm);
+void hudson_set_readspeed(u16 norm, u16 fast);
+void hudson_tpm_decode_spi(void);
+void lpc_wideio_512_window(uint16_t base);
+void lpc_wideio_16_window(uint16_t base);
+u8 pm_read8(u8 reg);
+u16 pm_read16(u16 reg);
+void pm_write8(u8 reg, u8 value);
+void pm_write16(u8 reg, u16 value);
+int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos);
+void s3_resume_init_data(void *FchParams);
+int s3_save_nvram_early(u32 dword, int size, int nvram_pos);
+
+#endif /* STONEYRIDGE_H */
diff --git a/src/soc/amd/stoneyridge/include/soc/imc.h b/src/soc/amd/stoneyridge/include/soc/imc.h
new file mode 100644
index 0000000..3d0e740
--- /dev/null
+++ b/src/soc/amd/stoneyridge/include/soc/imc.h
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef STONEYRIDGE_IMC_H
+#define STONEYRIDGE_IMC_H
+
+#include <Porting.h>
+#include <AGESA.h>
+#include <FchCommonCfg.h>
+
+void imc_reg_init(void);
+void enable_imc_thermal_zone(void);
+void oem_fan_control(FCH_DATA_BLOCK *FchParams);
+
+#endif
diff --git a/src/soc/amd/stoneyridge/include/soc/pci_devs.h b/src/soc/amd/stoneyridge/include/soc/pci_devs.h
new file mode 100644
index 0000000..cfd79d8
--- /dev/null
+++ b/src/soc/amd/stoneyridge/include/soc/pci_devs.h
@@ -0,0 +1,122 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PI_STONEYRIDGE_PCI_DEVS_H_
+#define _PI_STONEYRIDGE_PCI_DEVS_H_
+
+#define BUS0 0
+
+/* XHCI */
+#define XHCI_DEV 0x10
+#define XHCI_FUNC 0
+#define XHCI_DEVID 0x7814
+#define XHCI_DEVFN PCI_DEVFN(XHCI_DEV,XHCI_FUNC)
+
+#define XHCI2_DEV 0x10
+#define XHCI2_FUNC 1
+#define XHCI2_DEVID 0x7814
+#define XHCI2_DEVFN PCI_DEVFN(XHCI2_DEV,XHCI2_FUNC)
+
+/* SATA */
+#define SATA_DEV 0x11
+#define SATA_FUNC 0
+#define SATA_IDE_DEVID 0x7800
+#define AHCI_DEVID_MS 0x7801
+#define AHCI_DEVID_AMD 0x7804
+#define SATA_DEVFN PCI_DEVFN(SATA_DEV,SATA_FUNC)
+
+/* OHCI */
+#define OHCI1_DEV 0x12
+#define OHCI1_FUNC 0
+#define OHCI2_DEV 0x13
+#define OHCI2_FUNC 0
+#define OHCI3_DEV 0x16
+#define OHCI3_FUNC 0
+#define OHCI4_DEV 0x14
+#define OHCI4_FUNC 5
+#define OHCI_DEVID 0x7807
+#define OHCI1_DEVFN PCI_DEVFN(OHCI1_DEV,OHCI1_FUNC)
+#define OHCI2_DEVFN PCI_DEVFN(OHCI2_DEV,OHCI2_FUNC)
+#define OHCI3_DEVFN PCI_DEVFN(OHCI3_DEV,OHCI3_FUNC)
+#define OHCI4_DEVFN PCI_DEVFN(OHCI4_DEV,OHCI4_FUNC)
+
+/* EHCI */
+#define EHCI1_DEV 0x12
+#define EHCI1_FUNC 2
+#define EHCI2_DEV 0x13
+#define EHCI2_FUNC 2
+#define EHCI3_DEV 0x16
+#define EHCI3_FUNC 2
+#define EHCI_DEVID 0x7808
+#define EHCI1_DEVFN PCI_DEVFN(EHCI1_DEV,EHCI1_FUNC)
+#define EHCI2_DEVFN PCI_DEVFN(EHCI2_DEV,EHCI2_FUNC)
+#define EHCI3_DEVFN PCI_DEVFN(EHCI3_DEV,EHCI3_FUNC)
+
+/* SMBUS */
+#define SMBUS_DEV 0x14
+#define SMBUS_FUNC 0
+#define SMBUS_DEVID 0x780B
+#define SMBUS_DEVFN PCI_DEVFN(SMBUS_DEV,SMBUS_FUNC)
+
+/* IDE */
+#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_PI_BOLTON)
+#define IDE_DEV 0x14
+#define IDE_FUNC 1
+#define IDE_DEVID 0x780C
+#define IDE_DEVFN PCI_DEVFN(IDE_DEV,IDE_FUNC)
+#endif
+
+/* HD Audio */
+#define HDA_DEV 0x14
+#define HDA_FUNC 2
+#define HDA_DEVID 0x780D
+#define HDA_DEVFN PCI_DEVFN(HDA_DEV,HDA_FUNC)
+
+/* LPC BUS */
+#define PCU_DEV 0x14
+#define LPC_FUNC 3
+#define LPC_DEVID 0x780E
+#define LPC_DEVFN PCI_DEVFN(LPC_DEV,LPC_FUNC)
+
+/* PCI Ports */
+#define SB_PCI_PORT_DEV 0x14
+#define SB_PCI_PORT_FUNC 4
+#define SB_PCI_PORT_DEVID 0x780F
+#define SB_PCI_PORT_DEVFN PCI_DEVFN(SB_PCI_PORT_DEV,SB_PCI_PORT_FUNC)
+
+/* SD Controller */
+#define SD_DEV 0x14
+#define SD_FUNC 7
+#define SD_DEVID 0x7806
+#define SD_DEVFN PCI_DEVFN(SD_DEV,SD_FUNC)
+
+/* PCIe Ports */
+#if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_PI_BOLTON)
+#define SB_PCIE_DEV 0x15
+#define SB_PCIE_PORT1_FUNC 0
+#define SB_PCIE_PORT2_FUNC 1
+#define SB_PCIE_PORT3_FUNC 2
+#define SB_PCIE_PORT4_FUNC 3
+#define SB_PCIE_PORT1_DEVID 0x7820
+#define SB_PCIE_PORT2_DEVID 0x7821
+#define SB_PCIE_PORT3_DEVID 0x7822
+#define SB_PCIE_PORT4_DEVID 0x7823
+#define SB_PCIE_PORT1_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT1_FUNC)
+#define SB_PCIE_PORT2_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT2_FUNC)
+#define SB_PCIE_PORT3_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT3_FUNC)
+#define SB_PCIE_PORT4_DEVFN PCI_DEVFN(SB_PCIE_DEV,SB_PCIE_PORT4_FUNC)
+#endif
+
+#endif /* _PI_STONEYRIDGE_PCI_DEVS_H_ */
diff --git a/src/soc/amd/stoneyridge/include/soc/smbus.h b/src/soc/amd/stoneyridge/include/soc/smbus.h
new file mode 100644
index 0000000..d4499fc
--- /dev/null
+++ b/src/soc/amd/stoneyridge/include/soc/smbus.h
@@ -0,0 +1,70 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef STONEYRIDGE_SMBUS_H
+#define STONEYRIDGE_SMBUS_H
+
+#include <stdint.h>
+
+#define SMBHSTSTAT 0x0
+#define SMBSLVSTAT 0x1
+#define SMBHSTCTRL 0x2
+#define SMBHSTCMD 0x3
+#define SMBHSTADDR 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBHSTBLKDAT 0x7
+#define SMBSLVCTRL 0x8
+#define SMBSLVCMD_SHADOW 0x9
+#define SMBSLVEVT 0xa
+#define SMBSLVDAT 0xc
+
+#define AX_INDXC 0
+#define AX_INDXP 2
+#define AXCFG 4
+#define ABCFG 6
+#define RC_INDXC 1
+#define RC_INDXP 3
+
+#define AB_INDX 0xCD8
+#define AB_DATA (AB_INDX+4)
+
+/* Between 1-10 seconds, We should never timeout normally
+ * Longer than this is just painful when a timeout condition occurs.
+ */
+#define SMBUS_TIMEOUT (100 * 1000 * 10)
+
+#define abcfg_reg(reg, mask, val) \
+ alink_ab_indx((ABCFG), (reg), (mask), (val))
+#define axcfg_reg(reg, mask, val) \
+ alink_ab_indx((AXCFG), (reg), (mask), (val))
+#define axindxc_reg(reg, mask, val) \
+ alink_ax_indx((AX_INDXC), (reg), (mask), (val))
+#define axindxp_reg(reg, mask, val) \
+ alink_ax_indx((AX_INDXP), (reg), (mask), (val))
+#define rcindxc_reg(reg, port, mask, val) \
+ alink_rc_indx((RC_INDXC), (reg), (port), (mask), (val))
+#define rcindxp_reg(reg, port, mask, val) \
+ alink_rc_indx((RC_INDXP), (reg), (port), (mask), (val))
+
+int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
+int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val);
+int do_smbus_recv_byte(u32 smbus_io_base, u32 device);
+int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val);
+void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, u32 mask, u32 val);
+void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val);
+void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, u32 mask, u32 val);
+
+#endif /* STONEYRIDGE_SMBUS_H */
diff --git a/src/soc/amd/stoneyridge/include/soc/smi.h b/src/soc/amd/stoneyridge/include/soc/smi.h
new file mode 100644
index 0000000..7a3c804
--- /dev/null
+++ b/src/soc/amd/stoneyridge/include/soc/smi.h
@@ -0,0 +1,65 @@
+/*
+ * Utilities for SMI handlers and SMM setup
+ *
+ * Copyright (C) 2014 Alexandru Gagniuc <mr.nuke.me@gmail.com>
+ * Subject to the GNU GPL v2, or (at your option) any later version.
+ */
+
+#ifndef _SOUTHBRIDGE_AMD_PI_STONEYRIDGE_SMI_H
+#define _SOUTHBRIDGE_AMD_PI_STONEYRIDGE_SMI_H
+
+#include <arch/io.h>
+
+/* ACPI_MMIO_BASE + 0x200 -- leave this string here so grep catches it.
+ * This is defined by AGESA, but we dpn't include AGESA headers to avoid
+ * polluting the namesace.
+ */
+#define SMI_BASE 0xfed80200
+
+#define SMI_REG_SMITRIG0 0x98
+#define SMITRG0_EOS (1 << 28)
+#define SMITRG0_SMIENB (1 << 31)
+
+#define SMI_REG_CONTROL0 0xa0
+
+enum smi_mode {
+ SMI_MODE_DISABLE = 0,
+ SMI_MODE_SMI = 1,
+ SMI_MODE_NMI = 2,
+ SMI_MODE_IRQ13 = 3,
+};
+
+enum smi_lvl {
+ SMI_LVL_LOW = 0,
+ SMI_LVL_HIGH = 1,
+};
+
+static inline uint32_t smi_read32(uint8_t offset)
+{
+ return read32((void *)(SMI_BASE + offset));
+}
+
+static inline void smi_write32(uint8_t offset, uint32_t value)
+{
+ write32((void *)(SMI_BASE + offset), value);
+}
+
+static inline uint16_t smi_read16(uint8_t offset)
+{
+ return read16((void *)(SMI_BASE + offset));
+}
+
+static inline void smi_write16(uint8_t offset, uint16_t value)
+{
+ write16((void *)(SMI_BASE + offset), value);
+}
+
+void hudson_configure_gevent_smi(uint8_t gevent, uint8_t mode, uint8_t level);
+void hudson_disable_gevent_smi(uint8_t gevent);
+void hudson_enable_acpi_cmd_smi(void);
+
+#ifndef __SMM__
+void hudson_enable_smi_generation(void);
+#endif
+
+#endif /* _SOUTHBRIDGE_AMD_PI_STONEYRIDGE_SMI_H */
diff --git a/src/soc/amd/stoneyridge/lpc.c b/src/soc/amd/stoneyridge/lpc.c
new file mode 100644
index 0000000..b2ee843
--- /dev/null
+++ b/src/soc/amd/stoneyridge/lpc.c
@@ -0,0 +1,366 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pnp.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <device/pci_def.h>
+#include <pc80/mc146818rtc.h>
+#include <pc80/isa-dma.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <arch/acpi.h>
+#include <pc80/i8254.h>
+#include <pc80/i8259.h>
+#include <soc/hudson.h>
+#include <vboot/vbnv.h>
+
+static void lpc_init(device_t dev)
+{
+ u8 byte;
+ u32 dword;
+ device_t sm_dev;
+
+ /* Enable the LPC Controller */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ dword = pci_read_config32(sm_dev, 0x64);
+ dword |= 1 << 20;
+ pci_write_config32(sm_dev, 0x64, dword);
+
+ /* Initialize isa dma */
+ isa_dma_init();
+
+ /* Enable DMA transaction on the LPC bus */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= (1 << 2);
+ pci_write_config8(dev, 0x40, byte);
+
+ /* Disable the timeout mechanism on LPC */
+ byte = pci_read_config8(dev, 0x48);
+ byte &= ~(1 << 7);
+ pci_write_config8(dev, 0x48, byte);
+
+ /* Disable LPC MSI Capability */
+ byte = pci_read_config8(dev, 0x78);
+ byte &= ~(1 << 1);
+ byte &= ~(1 << 0); /* Keep the old way. i.e., when bus master/DMA cycle is going
+ on on LPC, it holds PCI grant, so no LPC slave cycle can
+ interrupt and visit LPC. */
+ pci_write_config8(dev, 0x78, byte);
+
+ /* bit0: Enable prefetch a cacheline (64 bytes) when Host reads code from SPI ROM */
+ /* bit3: Fix SPI_CS# timing issue when running at 66M. TODO:A12. */
+ byte = pci_read_config8(dev, 0xBB);
+ byte |= 1 << 0 | 1 << 3;
+ pci_write_config8(dev, 0xBB, byte);
+
+ cmos_check_update_date();
+
+ /* Initialize the real time clock.
+ * The 0 argument tells cmos_init not to
+ * update CMOS unless it is invalid.
+ * 1 tells cmos_init to always initialize the CMOS.
+ */
+ if (IS_ENABLED(CONFIG_VBOOT_VBNV_CMOS))
+ init_vbnv_cmos(0);
+ else
+ cmos_init(0);
+
+ /* Initialize i8259 pic */
+ setup_i8259 ();
+
+ /* Initialize i8254 timers */
+ setup_i8254 ();
+
+ /* Set up SERIRQ, enable continuous mode */
+ byte = (BIT(4) | BIT(7));
+ if (!IS_ENABLED(CONFIG_SERIRQ_CONTINUOUS_MODE))
+ byte |= BIT(6);
+
+ pm_write8(PM_SERIRQ_CONF, byte);
+}
+
+static void hudson_lpc_read_resources(device_t dev)
+{
+ struct resource *res;
+
+ /* Get the normal pci resources of this device */
+ pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */
+
+ /* Add an extra subtractive resource for both memory and I/O. */
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+ res->base = 0;
+ res->size = 0x1000;
+ res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+ res->base = 0xff800000;
+ res->size = 0x00800000; /* 8 MB for flash */
+ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ /* Add a memory resource for the SPI BAR. */
+ fixed_mem_resource(dev, 2, SPI_BASE_ADDRESS / 1024, 1, IORESOURCE_SUBTRACTIVE);
+
+ res = new_resource(dev, 3); /* IOAPIC */
+ res->base = IO_APIC_ADDR;
+ res->size = 0x00001000;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ compact_resources(dev);
+}
+
+static void hudson_lpc_set_resources(struct device *dev)
+{
+ struct resource *res;
+ u32 spi_enable_bits;
+
+ /* Special case. The SpiRomEnable and other enables should STAY set. */
+ res = find_resource(dev, 2);
+ spi_enable_bits = pci_read_config32(dev, SPIROM_BASE_ADDRESS_REGISTER);
+ spi_enable_bits &= 0xF;
+ pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER, res->base | spi_enable_bits);
+
+ pci_dev_set_resources(dev);
+}
+
+/**
+ * @brief Enable resources for children devices
+ *
+ * @param dev the device whose children's resources are to be enabled
+ *
+ */
+static void hudson_lpc_enable_childrens_resources(device_t dev)
+{
+ struct bus *link;
+ u32 reg, reg_x;
+ int var_num = 0;
+ u16 reg_var[3];
+ u16 reg_size[1] = {512};
+ u8 wiosize = pci_read_config8(dev, 0x74);
+
+ /* Be bit relaxed, tolerate that LPC region might be bigger than resource we try to fit,
+ * do it like this for all regions < 16 bytes. If there is a resource > 16 bytes
+ * it must be 512 bytes to be able to allocate the fresh LPC window.
+ *
+ * AGESA likes to enable already one LPC region in wide port base 0x64-0x65,
+ * using DFLT_SIO_PME_BASE_ADDRESS, 512 bytes size
+ * The code tries to check if resource can fit into this region
+ */
+
+ reg = pci_read_config32(dev, 0x44);
+ reg_x = pci_read_config32(dev, 0x48);
+
+ /* check if ranges are free and not use them if entry is just already taken */
+ if (reg_x & (1 << 2))
+ var_num = 1;
+ /* just in case check if someone did not manually set other ranges too */
+ if (reg_x & (1 << 24))
+ var_num = 2;
+
+ if (reg_x & (1 << 25))
+ var_num = 3;
+
+ /* check AGESA region size */
+ if (wiosize & (1 << 0))
+ reg_size[0] = 16;
+
+ reg_var[2] = pci_read_config16(dev, 0x90);
+ reg_var[1] = pci_read_config16(dev, 0x66);
+ reg_var[0] = pci_read_config16(dev, 0x64);
+
+ for (link = dev->link_list; link; link = link->next) {
+ device_t child;
+ for (child = link->children; child;
+ child = child->sibling) {
+ if (child->enabled
+ && (child->path.type == DEVICE_PATH_PNP)) {
+ struct resource *res;
+ for (res = child->resource_list; res; res = res->next) {
+ u32 base, end; /* don't need long long */
+ u32 rsize, set = 0, set_x = 0;
+ if (!(res->flags & IORESOURCE_IO))
+ continue;
+ base = res->base;
+ end = resource_end(res);
+ /* find a resource size */
+ printk(BIOS_DEBUG, "hudson lpc decode:%s, base=0x%08x, end=0x%08x\n",
+ dev_path(child), base, end);
+ switch (base) {
+ case 0x60: /* KB */
+ case 0x64: /* MS */
+ set |= (1 << 29);
+ rsize = 1;
+ break;
+ case 0x3f8: /* COM1 */
+ set |= (1 << 6);
+ rsize = 8;
+ break;
+ case 0x2f8: /* COM2 */
+ set |= (1 << 7);
+ rsize = 8;
+ break;
+ case 0x378: /* Parallel 1 */
+ set |= (1 << 0);
+ set |= (1 << 1); /* + 0x778 for ECP */
+ rsize = 8;
+ break;
+ case 0x3f0: /* FD0 */
+ set |= (1 << 26);
+ rsize = 8;
+ break;
+ case 0x220: /* 0x220 - 0x227 */
+ set |= (1 << 8);
+ rsize = 8;
+ break;
+ case 0x228: /* 0x228 - 0x22f */
+ set |= (1 << 9);
+ rsize = 8;
+ break;
+ case 0x238: /* 0x238 - 0x23f */
+ set |= (1 << 10);
+ rsize = 8;
+ break;
+ case 0x300: /* 0x300 -0x301 */
+ set |= (1 << 18);
+ rsize = 2;
+ break;
+ case 0x400:
+ set_x |= (1 << 16);
+ rsize = 0x40;
+ break;
+ case 0x480:
+ set_x |= (1 << 17);
+ rsize = 0x40;
+ break;
+ case 0x500:
+ set_x |= (1 << 18);
+ rsize = 0x40;
+ break;
+ case 0x580:
+ set_x |= (1 << 19);
+ rsize = 0x40;
+ break;
+ case 0x4700:
+ set_x |= (1 << 22);
+ rsize = 0xc;
+ break;
+ case 0xfd60:
+ set_x |= (1 << 23);
+ rsize = 16;
+ break;
+ default:
+ rsize = 0;
+ /* try AGESA allocated region in region 0 */
+ if ((var_num > 0) && ((base >=reg_var[0]) &&
+ ((base + res->size) <= (reg_var[0] + reg_size[0]))))
+ rsize = reg_size[0];
+ }
+ /* check if region found and matches the enable */
+ if (res->size <= rsize) {
+ reg |= set;
+ reg_x |= set_x;
+ /* check if we can fit resource in variable range */
+ } else if ((var_num < 3) &&
+ ((res->size <= 16) || (res->size == 512))) {
+ /* use variable ranges if pre-defined do not match */
+ switch (var_num) {
+ case 0:
+ reg_x |= (1 << 2);
+ if (res->size <= 16) {
+ wiosize |= (1 << 0);
+ }
+ break;
+ case 1:
+ reg_x |= (1 << 24);
+ if (res->size <= 16)
+ wiosize |= (1 << 2);
+ break;
+ case 2:
+ reg_x |= (1 << 25);
+ if (res->size <= 16)
+ wiosize |= (1 << 3);
+ break;
+ }
+ reg_var[var_num++] =
+ base & 0xffff;
+ } else {
+ printk(BIOS_ERR, "cannot fit LPC decode region:%s, base=0x%08x, end=0x%08x\n",
+ dev_path(child), base, end);
+ }
+ }
+ }
+ }
+ }
+ pci_write_config32(dev, 0x44, reg);
+ pci_write_config32(dev, 0x48, reg_x);
+ /* Set WideIO for as many IOs found (fall through is on purpose) */
+ switch (var_num) {
+ case 3:
+ pci_write_config16(dev, 0x90, reg_var[2]);
+ /* fall through */
+ case 2:
+ pci_write_config16(dev, 0x66, reg_var[1]);
+ /* fall through */
+ case 1:
+ pci_write_config16(dev, 0x64, reg_var[0]);
+ break;
+ }
+ pci_write_config8(dev, 0x74, wiosize);
+}
+
+static void hudson_lpc_enable_resources(device_t dev)
+{
+ pci_dev_enable_resources(dev);
+ hudson_lpc_enable_childrens_resources(dev);
+}
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ /* Just a dummy */
+ return current;
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations lpc_ops = {
+ .read_resources = hudson_lpc_read_resources,
+ .set_resources = hudson_lpc_set_resources,
+ .enable_resources = hudson_lpc_enable_resources,
+#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES)
+ .write_acpi_tables = acpi_write_hpet,
+#endif
+ .init = lpc_init,
+ .scan_bus = scan_lpc_bus,
+ .ops_pci = &lops_pci,
+};
+
+static const unsigned short pci_device_ids[] = {
+ PCI_DEVICE_ID_AMD_SB900_LPC,
+ PCI_DEVICE_ID_AMD_CZ_LPC,
+ 0
+};
+static const struct pci_driver lpc_driver __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .devices = pci_device_ids,
+};
diff --git a/src/soc/amd/stoneyridge/pci.c b/src/soc/amd/stoneyridge/pci.c
new file mode 100644
index 0000000..61d7a39
--- /dev/null
+++ b/src/soc/amd/stoneyridge/pci.c
@@ -0,0 +1,67 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <soc/hudson.h>
+#include <amd_pci_util.h>
+#include <bootstate.h>
+
+static void pci_init(struct device *dev)
+{
+}
+
+/*
+ * Update the PCI devices with a valid IRQ number
+ * that is set in the mainboard PCI_IRQ structures.
+ */
+static void set_pci_irqs(void *unused)
+{
+ /* Write PCI_INTR regs 0xC00/0xC01 */
+ write_pci_int_table();
+
+ /* Write IRQs for all devicetree enabled devices */
+ write_pci_cfg_irqs();
+}
+
+/*
+ * Hook this function into the PCI state machine
+ * on entry into BS_DEV_ENABLE.
+ */
+BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, set_pci_irqs, NULL);
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = 0,
+};
+
+static struct device_operations pci_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pci_init,
+ .scan_bus = pci_scan_bridge,
+ .reset_bus = pci_bus_reset,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver pci_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_SB900_PCI,
+};
diff --git a/src/soc/amd/stoneyridge/pcie.c b/src/soc/amd/stoneyridge/pcie.c
new file mode 100644
index 0000000..92b0a50
--- /dev/null
+++ b/src/soc/amd/stoneyridge/pcie.c
@@ -0,0 +1,61 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <soc/hudson.h>
+
+static void pcie_init(struct device *dev)
+{
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = 0,
+};
+
+static struct device_operations pci_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pcie_init,
+ .scan_bus = pci_scan_bridge,
+ .reset_bus = pci_bus_reset,
+ .ops_pci = &lops_pci,
+};
+
+static const struct pci_driver pciea_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_SB900_PCIEA,
+};
+
+static const struct pci_driver pcieb_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_SB900_PCIEB,
+};
+static const struct pci_driver pciec_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_SB900_PCIEC,
+};
+static const struct pci_driver pcied_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_SB900_PCIED,
+};
diff --git a/src/soc/amd/stoneyridge/reset.c b/src/soc/amd/stoneyridge/reset.c
new file mode 100644
index 0000000..e44a886
--- /dev/null
+++ b/src/soc/amd/stoneyridge/reset.c
@@ -0,0 +1,45 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+// Use simple device model for this file even in ramstage
+#define __SIMPLE_DEVICE__
+
+#include <arch/io.h>
+#include <reset.h>
+
+#define HT_INIT_CONTROL 0x6C
+ #define HTIC_BIOSR_Detect (1 << 5)
+
+
+static void set_bios_reset(void)
+{
+ u32 htic;
+ htic = pci_io_read_config32(PCI_DEV(0, 0x18, 0), HT_INIT_CONTROL);
+ htic &= ~HTIC_BIOSR_Detect;
+ pci_io_write_config32(PCI_DEV(0, 0x18, 0), HT_INIT_CONTROL, htic);
+}
+
+void do_hard_reset(void)
+{
+ set_bios_reset();
+ /* Try rebooting through port 0xcf9 */
+ /*
+ * Actually it is not a real hard_reset
+ * --- it only reset coherent link table,
+ * but not reset link freq and width
+ */
+ outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
+ outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
+}
diff --git a/src/soc/amd/stoneyridge/sata.c b/src/soc/amd/stoneyridge/sata.c
new file mode 100644
index 0000000..32090d2
--- /dev/null
+++ b/src/soc/amd/stoneyridge/sata.c
@@ -0,0 +1,81 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <delay.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include <soc/hudson.h>
+
+
+static void sata_init(struct device *dev)
+{
+ /**************************************
+ * Configure the SATA port multiplier *
+ **************************************/
+ #define BYTE_TO_DWORD_OFFSET(x) (x/4)
+ #define AHCI_BASE_ADDRESS_REG 0x24
+ #define MISC_CONTROL_REG 0x40
+ #define UNLOCK_BIT (1<<0)
+ #define SATA_CAPABILITIES_REG 0xFC
+ #define CFG_CAP_SPM (1<<12)
+
+ volatile u32 *ahci_ptr =
+ (u32*)(pci_read_config32(dev, AHCI_BASE_ADDRESS_REG) & 0xFFFFFF00);
+ u32 temp;
+
+ /* unlock the write-protect */
+ temp = pci_read_config32(dev, MISC_CONTROL_REG);
+ temp |= UNLOCK_BIT;
+ pci_write_config32(dev, MISC_CONTROL_REG, temp);
+
+ /* set the SATA AHCI mode to allow port expanders */
+ *(ahci_ptr + BYTE_TO_DWORD_OFFSET(SATA_CAPABILITIES_REG)) |= CFG_CAP_SPM;
+
+ /* lock the write-protect */
+ temp = pci_read_config32(dev, MISC_CONTROL_REG);
+ temp &= ~UNLOCK_BIT;
+ pci_write_config32(dev, MISC_CONTROL_REG, temp);
+};
+
+static struct pci_operations lops_pci = {
+ /* .set_subsystem = pci_dev_set_subsystem, */
+};
+
+static struct device_operations sata_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sata_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const unsigned short pci_device_ids[] = {
+ PCI_DEVICE_ID_AMD_SB900_SATA,
+ PCI_DEVICE_ID_AMD_SB900_SATA_AHCI,
+ PCI_DEVICE_ID_AMD_CZ_SATA,
+ PCI_DEVICE_ID_AMD_CZ_SATA_AHCI,
+ 0
+};
+
+static const struct pci_driver sata0_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .devices = pci_device_ids,
+};
diff --git a/src/soc/amd/stoneyridge/sd.c b/src/soc/amd/stoneyridge/sd.c
new file mode 100644
index 0000000..484dee4
--- /dev/null
+++ b/src/soc/amd/stoneyridge/sd.c
@@ -0,0 +1,65 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/device.h>
+#include <delay.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include <soc/hudson.h>
+
+static void sd_init(struct device *dev)
+{
+ u32 stepping;
+
+ stepping = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x18, 3)), 0xFC);
+
+ struct soc_amd_stoneyridge_config *sd_chip =
+ (struct soc_amd_stoneyridge_config *)(dev->chip_info);
+
+ if (sd_chip->sd_mode == 3) { /* SD 3.0 mode */
+ pci_write_config32(dev, 0xA4, 0x31FEC8B2);
+ pci_write_config32(dev, 0xA8, 0x00002503);
+ pci_write_config32(dev, 0xB0, 0x02180C19);
+ pci_write_config32(dev, 0xD0, 0x0000078B);
+ }
+ else { /* SD 2.0 mode */
+ if ((stepping & 0x0000000F) == 0) { /* Stepping A0 */
+ pci_write_config32(dev, 0xA4, 0x31DE32B2);
+ pci_write_config32(dev, 0xB0, 0x01180C19);
+ pci_write_config32(dev, 0xD0, 0x0000058B);
+ }
+ else { /* Stepping >= A1 */
+ pci_write_config32(dev, 0xA4, 0x31FE3FB2);
+ pci_write_config32(dev, 0xB0, 0x01180C19);
+ pci_write_config32(dev, 0xD0, 0x0000078B);
+ }
+ }
+}
+
+static struct device_operations sd_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sd_init,
+ .scan_bus = 0,
+};
+
+static const struct pci_driver sd_driver __pci_driver = {
+ .ops = &sd_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_YANGTZE_SD,
+};
diff --git a/src/soc/amd/stoneyridge/sm.c b/src/soc/amd/stoneyridge/sm.c
new file mode 100644
index 0000000..421151a
--- /dev/null
+++ b/src/soc/amd/stoneyridge/sm.c
@@ -0,0 +1,135 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <device/smbus.h>
+#include <pc80/mc146818rtc.h>
+#include <arch/io.h>
+#include <cpu/x86/lapic.h>
+#include <arch/ioapic.h>
+#include <stdlib.h>
+#include <soc/hudson.h>
+#include <soc/smbus.h>
+
+#define NMI_OFF 0
+
+#define MAINBOARD_POWER_OFF 0
+#define MAINBOARD_POWER_ON 1
+
+#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
+#endif
+
+/*
+* HUDSON enables all USB controllers by default in SMBUS Control.
+* HUDSON enables SATA by default in SMBUS Control.
+*/
+
+static void sm_init(device_t dev)
+{
+ setup_ioapic(VIO_APIC_VADDR, CONFIG_MAX_CPUS);
+}
+
+static int lsmbus_recv_byte(device_t dev)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_recv_byte(res->base, device);
+}
+
+static int lsmbus_send_byte(device_t dev, u8 val)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_send_byte(res->base, device, val);
+}
+
+static int lsmbus_read_byte(device_t dev, u8 address)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_read_byte(res->base, device, address);
+}
+
+static int lsmbus_write_byte(device_t dev, u8 address, u8 val)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_write_byte(res->base, device, address, val);
+}
+static struct smbus_bus_operations lops_smbus_bus = {
+ .recv_byte = lsmbus_recv_byte,
+ .send_byte = lsmbus_send_byte,
+ .read_byte = lsmbus_read_byte,
+ .write_byte = lsmbus_write_byte,
+};
+
+static void hudson_sm_read_resources(device_t dev)
+{
+}
+
+static void hudson_sm_set_resources(struct device *dev)
+{
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+static struct device_operations smbus_ops = {
+ .read_resources = hudson_sm_read_resources,
+ .set_resources = hudson_sm_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sm_init,
+ .scan_bus = scan_smbus,
+ .ops_pci = &lops_pci,
+ .ops_smbus_bus = &lops_smbus_bus,
+};
+static const struct pci_driver smbus_driver __pci_driver = {
+ .ops = &smbus_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_SB900_SM,
+};
diff --git a/src/soc/amd/stoneyridge/smbus.c b/src/soc/amd/stoneyridge/smbus.c
new file mode 100644
index 0000000..e890c47
--- /dev/null
+++ b/src/soc/amd/stoneyridge/smbus.c
@@ -0,0 +1,246 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _STONEYRIDGE_SMBUS_C_
+#define _STONEYRIDGE_SMBUS_C_
+
+#include <io.h>
+#include <stdint.h>
+#include <soc/smbus.h>
+
+static int smbus_wait_until_ready(u32 smbus_io_base)
+{
+ u32 loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ u8 val;
+ val = inb(smbus_io_base + SMBHSTSTAT);
+ val &= 0x1f;
+ if (val == 0) { /* ready now */
+ return 0;
+ }
+ outb(val, smbus_io_base + SMBHSTSTAT);
+ } while (--loops);
+ return -2; /* time out */
+}
+
+static int smbus_wait_until_done(u32 smbus_io_base)
+{
+ u32 loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ u8 val;
+
+ val = inb(smbus_io_base + SMBHSTSTAT);
+ val &= 0x1f; /* mask off reserved bits */
+ if (val & 0x1c) {
+ return -5; /* error */
+ }
+ if (val == 0x02) {
+ outb(val, smbus_io_base + SMBHSTSTAT); /* clear status */
+ return 0;
+ }
+ } while (--loops);
+ return -3; /* timeout */
+}
+
+int do_smbus_recv_byte(u32 smbus_io_base, u32 device)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ /* read results of transaction */
+ byte = inb(smbus_io_base + SMBHSTCMD);
+
+ return byte;
+}
+
+int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the command... */
+ outb(val, smbus_io_base + SMBHSTCMD);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ return 0;
+}
+
+int do_smbus_read_byte(u32 smbus_io_base, u32 device,
+ u32 address)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the command/address... */
+ outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ /* read results of transaction */
+ byte = inb(smbus_io_base + SMBHSTDAT0);
+
+ return byte;
+}
+
+int do_smbus_write_byte(u32 smbus_io_base, u32 device,
+ u32 address, u8 val)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the command/address... */
+ outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+ /* output value */
+ outb(val, smbus_io_base + SMBHSTDAT0);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ return 0;
+}
+
+void alink_ab_indx(u32 reg_space, u32 reg_addr,
+ u32 mask, u32 val)
+{
+ u32 tmp;
+
+ outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX);
+ tmp = inl(AB_DATA);
+ /* rpr 4.2
+ * For certain revisions of the chip, the ABCFG registers,
+ * with an address of 0x100NN (where 'N' is any hexadecimal
+ * number), require an extra programming step.*/
+ outl(0, AB_INDX);
+
+ tmp &= ~mask;
+ tmp |= val;
+
+ /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | reg_addr); */
+ outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ outl(tmp, AB_DATA);
+ outl(0, AB_INDX);
+}
+
+void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port,
+ u32 mask, u32 val)
+{
+ u32 tmp;
+
+ outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX);
+ tmp = inl(AB_DATA);
+ /* rpr 4.2
+ * For certain revisions of the chip, the ABCFG registers,
+ * with an address of 0x100NN (where 'N' is any hexadecimal
+ * number), require an extra programming step.*/
+ outl(0, AB_INDX);
+
+ tmp &= ~mask;
+ tmp |= val;
+
+ //printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | (port&3) << 24 | reg_addr);
+ outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ outl(tmp, AB_DATA);
+ outl(0, AB_INDX);
+}
+
+/* space = 0: AX_INDXC, AX_DATAC
+ * space = 1: AX_INDXP, AX_DATAP
+ */
+void alink_ax_indx(u32 space /*c or p? */ , u32 axindc,
+ u32 mask, u32 val)
+{
+ u32 tmp;
+
+ /* read axindc to tmp */
+ outl(space << 29 | space << 3 | 0x30, AB_INDX);
+ outl(axindc, AB_DATA);
+ outl(0, AB_INDX);
+ outl(space << 29 | space << 3 | 0x34, AB_INDX);
+ tmp = inl(AB_DATA);
+ outl(0, AB_INDX);
+
+ tmp &= ~mask;
+ tmp |= val;
+
+ /* write tmp */
+ outl(space << 29 | space << 3 | 0x30, AB_INDX);
+ outl(axindc, AB_DATA);
+ outl(0, AB_INDX);
+ outl(space << 29 | space << 3 | 0x34, AB_INDX);
+ outl(tmp, AB_DATA);
+ outl(0, AB_INDX);
+}
+#endif
diff --git a/src/soc/amd/stoneyridge/smbus_spd.c b/src/soc/amd/stoneyridge/smbus_spd.c
new file mode 100644
index 0000000..8d67b1e
--- /dev/null
+++ b/src/soc/amd/stoneyridge/smbus_spd.c
@@ -0,0 +1,148 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/pci_def.h>
+#include <device/device.h>
+
+/* warning: Porting.h includes an open #pragma pack(1) */
+#include <Porting.h>
+#include <AGESA.h>
+#include <amdlib.h>
+
+#include <northbridge/amd/pi/dimmSpd.h>
+
+/*-----------------------------------------------------------------------------
+ *
+ * readSmbusByteData - read a single SPD byte from any offset
+ */
+
+static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
+{
+ unsigned int status;
+ UINT64 limit;
+
+ address |= 1; // set read bit
+
+ __outbyte (iobase + 0, 0xFF); // clear error status
+ __outbyte (iobase + 1, 0x1F); // clear error status
+ __outbyte (iobase + 3, offset); // offset in eeprom
+ __outbyte (iobase + 4, address); // slave address and read bit
+ __outbyte (iobase + 2, 0x48); // read byte command
+
+ // time limit to avoid hanging for unexpected error status (should never happen)
+ limit = __rdtsc () + 2000000000 / 10;
+ for (;;)
+ {
+ status = __inbyte (iobase);
+ if (__rdtsc () > limit) break;
+ if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
+ if ((status & 1) == 1) continue; // HostBusy set, keep waiting
+ break;
+ }
+
+ buffer [0] = __inbyte (iobase + 5);
+ if (status == 2) status = 0; // check for done with no errors
+ return status;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * readSmbusByte - read a single SPD byte from the default offset
+ * this function is faster function readSmbusByteData
+ */
+
+static int readSmbusByte (int iobase, int address, char *buffer)
+{
+ unsigned int status;
+ UINT64 limit;
+
+ __outbyte (iobase + 0, 0xFF); // clear error status
+ __outbyte (iobase + 2, 0x44); // read command
+
+ // time limit to avoid hanging for unexpected error status
+ limit = __rdtsc () + 2000000000 / 10;
+ for (;;)
+ {
+ status = __inbyte (iobase);
+ if (__rdtsc () > limit) break;
+ if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
+ if ((status & 1) == 1) continue; // HostBusy set, keep waiting
+ break;
+ }
+
+ buffer [0] = __inbyte (iobase + 5);
+ if (status == 2) status = 0; // check for done with no errors
+ return status;
+}
+
+/*---------------------------------------------------------------------------
+ *
+ * readspd - Read one or more SPD bytes from a DIMM.
+ * Start with offset zero and read sequentially.
+ * Optimization relies on autoincrement to avoid
+ * sending offset for every byte.
+ * Reads 128 bytes in 7-8 ms at 400 KHz.
+ */
+
+static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
+{
+ int index, error;
+
+ printk(BIOS_SPEW, "-------------READING SPD-----------\n");
+ printk(BIOS_SPEW, "iobase: 0x%08X, SmbusSlave: 0x%08X, count: %d\n",
+ iobase, SmbusSlaveAddress, count);
+
+ /* read the first byte using offset zero */
+ error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
+
+ if (error) {
+ printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
+ return error;
+ }
+
+ /* read the remaining bytes using auto-increment for speed */
+ for (index = 1; index < count; index++)
+ {
+ error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]);
+ if (error) {
+ printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
+ return error;
+ }
+ }
+ printk(BIOS_SPEW, "\n");
+ printk(BIOS_SPEW, "-------------FINISHED READING SPD-----------\n");
+
+ return 0;
+}
+
+static void writePmReg (int reg, int data)
+{
+ __outbyte (0xCD6, reg);
+ __outbyte (0xCD7, data);
+}
+
+static void setupFch (int ioBase)
+{
+ writePmReg (0x2D, ioBase >> 8);
+ writePmReg (0x2C, ioBase | 1);
+ __outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
+}
+
+int hudson_readSpd(int spdAddress, char *buf, size_t len)
+{
+ int ioBase = 0xB00;
+ setupFch (ioBase);
+ return readspd (ioBase, spdAddress, buf, len);
+}
diff --git a/src/soc/amd/stoneyridge/smi.c b/src/soc/amd/stoneyridge/smi.c
new file mode 100644
index 0000000..c92697c
--- /dev/null
+++ b/src/soc/amd/stoneyridge/smi.c
@@ -0,0 +1,26 @@
+/*
+ * Utilities for SMM setup
+ *
+ * Copyright (C) 2014 Alexandru Gagniuc <mr.nuke.me@gmail.com>
+ * Subject to the GNU GPL v2, or (at your option) any later version.
+ */
+
+
+
+#include <console/console.h>
+#include <cpu/cpu.h>
+#include <soc/smi.h>
+
+void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
+{
+ printk(BIOS_DEBUG, "smm_setup_structures STUB!!!\n");
+}
+
+/** Set the EOS bit and enable SMI generation from southbridge */
+void hudson_enable_smi_generation(void)
+{
+ uint32_t reg = smi_read32(SMI_REG_SMITRIG0);
+ reg &= ~SMITRG0_SMIENB; /* Enable SMI generation */
+ reg |= SMITRG0_EOS; /* Set EOS bit */
+ smi_write32(SMI_REG_SMITRIG0, reg);
+}
diff --git a/src/soc/amd/stoneyridge/smi_util.c b/src/soc/amd/stoneyridge/smi_util.c
new file mode 100644
index 0000000..fecaf90
--- /dev/null
+++ b/src/soc/amd/stoneyridge/smi_util.c
@@ -0,0 +1,78 @@
+/*
+ * SMM utilities used in both SMM and normal mode
+ *
+ * Copyright (C) 2014 Alexandru Gagniuc <mr.nuke.me@gmail.com>
+ * Subject to the GNU GPL v2, or (at your option) any later version.
+ */
+
+#include <console/console.h>
+#include <soc/smi.h>
+
+#define STONEYRIDGE_SMI_ACPI_COMMAND 75
+
+static void configure_smi(uint8_t smi_num, uint8_t mode)
+{
+ uint8_t reg32_offset, bit_offset;
+ uint32_t reg32;
+
+ /* SMI sources range from [0:149] */
+ if (smi_num > 149) {
+ printk(BIOS_WARNING, "BUG: Invalid SMI: %u\n", smi_num);
+ return;
+ }
+
+ /* 16 sources per register, 2 bits per source; registers are 4 bytes */
+ reg32_offset = (smi_num / 16) * 4;
+ bit_offset = (smi_num % 16) * 2;
+
+ reg32 = smi_read32(SMI_REG_CONTROL0 + reg32_offset);
+ reg32 &= ~(0x3 << (bit_offset));
+ reg32 |= (mode & 0x3) << bit_offset;
+ smi_write32(SMI_REG_CONTROL0 + reg32_offset, reg32);
+}
+
+/**
+ * Configure generation of interrupts for given GEVENT pin
+ *
+ * @param gevent The GEVENT pin number. Valid values are 0 thru 23
+ * @param mode The type of event this pin should generate. Note that only
+ * SMI_MODE_SMI generates an SMI. SMI_MODE_DISABLE disables events.
+ * @param level SMI_LVL_LOW or SMI_LVL_HIGH
+ */
+void hudson_configure_gevent_smi(uint8_t gevent, uint8_t mode, uint8_t level)
+{
+ uint32_t reg32;
+ /* GEVENT pins range from [0:23] */
+ if (gevent > 23) {
+ printk(BIOS_WARNING, "BUG: Invalid GEVENT: %u\n", gevent);
+ return;
+ }
+
+ /* SMI0 source is GEVENT0 and so on */
+ configure_smi(gevent, mode);
+
+ /* And set set the trigger level */
+ reg32 = smi_read32(SMI_REG_SMITRIG0);
+ reg32 &= ~(1 << gevent);
+ reg32 |= (level & 0x1) << gevent;
+ smi_write32(SMI_REG_SMITRIG0, reg32);
+}
+
+/** Disable events from given GEVENT pin */
+void hudson_disable_gevent_smi(uint8_t gevent)
+{
+ /* GEVENT pins range from [0:23] */
+ if (gevent > 23) {
+ printk(BIOS_WARNING, "BUG: Invalid GEVENT: %u\n", gevent);
+ return;
+ }
+
+ /* SMI0 source is GEVENT0 and so on */
+ configure_smi(gevent, SMI_MODE_DISABLE);
+}
+
+/** Enable SMIs on writes to ACPI SMI command port */
+void hudson_enable_acpi_cmd_smi(void)
+{
+ configure_smi(STONEYRIDGE_SMI_ACPI_COMMAND, SMI_MODE_SMI);
+}
diff --git a/src/soc/amd/stoneyridge/smihandler.c b/src/soc/amd/stoneyridge/smihandler.c
new file mode 100644
index 0000000..cf95418
--- /dev/null
+++ b/src/soc/amd/stoneyridge/smihandler.c
@@ -0,0 +1,136 @@
+/*
+ * SMI handler for Hudson southbridges
+ *
+ * Copyright (C) 2014 Alexandru Gagniuc <mr.nuke.me@gmail.com>
+ * Subject to the GNU GPL v2, or (at your option) any later version.
+ */
+
+
+#include <console/console.h>
+#include <cpu/x86/smm.h>
+#include <delay.h>
+#include <soc/hudson.h>
+#include <soc/smi.h>
+
+
+
+#define SMI_0x88_ACPI_COMMAND (1 << 11)
+
+enum smi_source {
+ SMI_SOURCE_SCI = (1 << 0),
+ SMI_SOURCE_GPE = (1 << 1),
+ SMI_SOURCE_0x84 = (1 << 2),
+ SMI_SOURCE_0x88 = (1 << 3),
+ SMI_SOURCE_IRQ_TRAP = (1 << 4),
+ SMI_SOURCE_0x90 = (1 << 5)
+};
+
+static void hudson_apmc_smi_handler(void)
+{
+ u32 reg32;
+ const uint8_t cmd = inb(ACPI_SMI_CTL_PORT);
+
+ switch (cmd) {
+ case ACPI_SMI_CMD_ENABLE:
+ reg32 = inl(ACPI_PM1_CNT_BLK);
+ reg32 |= (1 << 0); /* SCI_EN */
+ outl(reg32, ACPI_PM1_CNT_BLK);
+ break;
+ case ACPI_SMI_CMD_DISABLE:
+ reg32 = inl(ACPI_PM1_CNT_BLK);
+ reg32 &= ~(1 << 0); /* clear SCI_EN */
+ outl(ACPI_PM1_CNT_BLK, reg32);
+ break;
+ }
+
+ mainboard_smi_apmc(cmd);
+}
+
+int southbridge_io_trap_handler(int smif)
+{
+ return 0;
+}
+
+static void process_smi_sci(void)
+{
+ const uint32_t status = smi_read32(0x10);
+
+ /* Clear events to prevent re-entering SMI if event isn't handled */
+ smi_write32(0x10, status);
+}
+
+static void process_gpe_smi(void)
+{
+ const uint32_t status = smi_read32(0x80);
+ const uint32_t gevent_mask = (1 << 24) - 1;
+
+ /* Only Bits [23:0] indicate GEVENT SMIs. */
+ if (status & gevent_mask) {
+ /* A GEVENT SMI occurred */
+ mainboard_smi_gpi(status & gevent_mask);
+ }
+
+ /* Clear events to prevent re-entering SMI if event isn't handled */
+ smi_write32(0x80, status);
+}
+
+static void process_smi_0x84(void)
+{
+ const uint32_t status = smi_read32(0x84);
+
+ /* Clear events to prevent re-entering SMI if event isn't handled */
+ smi_write32(0x84, status);
+}
+
+static void process_smi_0x88(void)
+{
+ const uint32_t status = smi_read32(0x88);
+
+ if (status & SMI_0x88_ACPI_COMMAND) {
+ /* Command received via ACPI SMI command port */
+ hudson_apmc_smi_handler();
+ }
+ /* Clear events to prevent re-entering SMI if event isn't handled */
+ smi_write32(0x88, status);
+}
+
+static void process_smi_0x8c(void)
+{
+ const uint32_t status = smi_read32(0x8c);
+
+ /* Clear events to prevent re-entering SMI if event isn't handled */
+ smi_write32(0x8c, status);
+}
+
+static void process_smi_0x90(void)
+{
+ const uint32_t status = smi_read32(0x90);
+
+ /* Clear events to prevent re-entering SMI if event isn't handled */
+ smi_write32(0x90, status);
+}
+
+void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
+{
+ const uint16_t smi_src = smi_read16(0x94);
+
+ if (smi_src & SMI_SOURCE_SCI)
+ process_smi_sci();
+ if (smi_src & SMI_SOURCE_GPE)
+ process_gpe_smi();
+ if (smi_src & SMI_SOURCE_0x84)
+ process_smi_0x84();
+ if (smi_src & SMI_SOURCE_0x88)
+ process_smi_0x88();
+ if (smi_src & SMI_SOURCE_IRQ_TRAP)
+ process_smi_0x8c();
+ if (smi_src & SMI_SOURCE_0x90)
+ process_smi_0x90();
+}
+
+void southbridge_smi_set_eos(void)
+{
+ uint32_t reg = smi_read32(SMI_REG_SMITRIG0);
+ reg |= SMITRG0_EOS;
+ smi_write32(SMI_REG_SMITRIG0, reg);
+}
diff --git a/src/soc/amd/stoneyridge/uart.c b/src/soc/amd/stoneyridge/uart.c
new file mode 100644
index 0000000..5d88204
--- /dev/null
+++ b/src/soc/amd/stoneyridge/uart.c
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/uart.h>
+
+uintptr_t uart_platform_base(int idx)
+{
+ return (uintptr_t)(0xFEDC6000 + 0x2000 * (idx & 1));
+}
+
+unsigned int uart_platform_refclk(void)
+{
+ return 48000000;
+}
diff --git a/src/soc/amd/stoneyridge/usb.c b/src/soc/amd/stoneyridge/usb.c
new file mode 100644
index 0000000..6f27395
--- /dev/null
+++ b/src/soc/amd/stoneyridge/usb.c
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <device/pci_ehci.h>
+#include <arch/io.h>
+#include <soc/hudson.h>
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static void usb_init(struct device *dev)
+{
+}
+
+static struct device_operations usb_ops = {
+ .read_resources = pci_ehci_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static const unsigned short pci_device_ids[] = {
+ PCI_DEVICE_ID_AMD_SB900_USB_18_0,
+ PCI_DEVICE_ID_AMD_SB900_USB_18_2,
+ PCI_DEVICE_ID_AMD_SB900_USB_20_5,
+ PCI_DEVICE_ID_AMD_CZ_USB_0,
+ PCI_DEVICE_ID_AMD_CZ_USB_1,
+ PCI_DEVICE_ID_AMD_CZ_USB3_0,
+ 0
+};
+
+static const struct pci_driver usb_0_driver __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .devices = pci_device_ids,
+};
diff --git a/src/vendorcode/amd/pi/Makefile.inc b/src/vendorcode/amd/pi/Makefile.inc
index 07f208a..279b89d 100644
--- a/src/vendorcode/amd/pi/Makefile.inc
+++ b/src/vendorcode/amd/pi/Makefile.inc
@@ -61,7 +61,12 @@
endif
AGESA_INC += -I$(src)/northbridge/amd/pi
+
+ifeq ($(CONFIG_SOC_AMD_STONEYRIDGE),y)
+AGESA_INC += -I$(src)/soc/amd/stoneyridge/include
+else
AGESA_INC += -I$(src)/southbridge/amd/pi/hudson
+endif
AGESA_INC += -I$(src)/arch/x86/include
AGESA_INC += -I$(src)/include
@@ -115,7 +120,7 @@
agesa_raw_files += $(wildcard $(AGESA_ROOT)/Proc/Fch/Common/*.[cS])
agesa_raw_files += $(wildcard $(AGESA_ROOT)/Proc/Psp/PspBaseLib/*.[cS])
endif
-ifeq ($(CONFIG_HUDSON_IMC_FWM),y)
+ifeq ($(CONFIG_HUDSON_IMC_FWM)$(CONFIG_STONEYRIDGE_IMC_FWM),y)
agesa_raw_files += $(wildcard $(src)/vendorcode/amd/pi/Lib/imc/*.c)
endif