| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <assert.h> |
| #include <cbfs.h> |
| #include <cbmem.h> |
| #include <cf9_reset.h> |
| #include <console/console.h> |
| #include <device/pci_def.h> |
| #include <memory_info.h> |
| #include <mrc_cache.h> |
| #include <string.h> |
| #if CONFIG(EC_GOOGLE_CHROMEEC) |
| #include <ec/google/chromeec/ec.h> |
| #include <ec/google/chromeec/ec_commands.h> |
| #endif |
| #include <vendorcode/google/chromeos/chromeos.h> |
| #include <soc/iomap.h> |
| #include <soc/pei_data.h> |
| #include <soc/pei_wrapper.h> |
| #include <soc/pm.h> |
| #include <soc/romstage.h> |
| #include <soc/systemagent.h> |
| |
| /* |
| * Dump in the log memory controller configuration as read from the memory |
| * controller registers. |
| */ |
| static void report_memory_config(void) |
| { |
| u32 addr_decoder_common, addr_decode_ch[2]; |
| int i; |
| |
| addr_decoder_common = MCHBAR32(0x5000); |
| addr_decode_ch[0] = MCHBAR32(0x5004); |
| addr_decode_ch[1] = MCHBAR32(0x5008); |
| |
| printk(BIOS_DEBUG, "memcfg DDR3 clock %d MHz\n", |
| (MCHBAR32(0x5e04) * 13333 * 2 + 50)/100); |
| printk(BIOS_DEBUG, "memcfg channel assignment: A: %d, B % d, C % d\n", |
| addr_decoder_common & 3, |
| (addr_decoder_common >> 2) & 3, |
| (addr_decoder_common >> 4) & 3); |
| |
| for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) { |
| u32 ch_conf = addr_decode_ch[i]; |
| printk(BIOS_DEBUG, "memcfg channel[%d] config (%8.8x):\n", |
| i, ch_conf); |
| printk(BIOS_DEBUG, " enhanced interleave mode %s\n", |
| ((ch_conf >> 22) & 1) ? "on" : "off"); |
| printk(BIOS_DEBUG, " rank interleave %s\n", |
| ((ch_conf >> 21) & 1) ? "on" : "off"); |
| printk(BIOS_DEBUG, " DIMMA %d MB width %s %s rank%s\n", |
| ((ch_conf >> 0) & 0xff) * 256, |
| ((ch_conf >> 19) & 1) ? "x16" : "x8 or x32", |
| ((ch_conf >> 17) & 1) ? "dual" : "single", |
| ((ch_conf >> 16) & 1) ? "" : ", selected"); |
| printk(BIOS_DEBUG, " DIMMB %d MB width %s %s rank%s\n", |
| ((ch_conf >> 8) & 0xff) * 256, |
| ((ch_conf >> 19) & 1) ? "x16" : "x8 or x32", |
| ((ch_conf >> 18) & 1) ? "dual" : "single", |
| ((ch_conf >> 16) & 1) ? ", selected" : ""); |
| } |
| } |
| |
| /* |
| * Find PEI executable in coreboot filesystem and execute it. |
| */ |
| void raminit(struct pei_data *pei_data) |
| { |
| size_t mrc_size; |
| struct memory_info *mem_info; |
| pei_wrapper_entry_t entry; |
| int ret; |
| struct cbfsf f; |
| uint32_t type = CBFS_TYPE_MRC; |
| |
| broadwell_fill_pei_data(pei_data); |
| |
| if (CONFIG(BROADWELL_VBOOT_IN_BOOTBLOCK) && |
| vboot_recovery_mode_enabled()) { |
| /* Recovery mode does not use MRC cache */ |
| printk(BIOS_DEBUG, "Recovery mode: not using MRC cache.\n"); |
| } else { |
| /* Assume boot device is memory mapped. */ |
| assert(CONFIG(BOOT_DEVICE_MEMORY_MAPPED)); |
| |
| pei_data->saved_data = |
| mrc_cache_current_mmap_leak(MRC_TRAINING_DATA, 0, |
| &mrc_size); |
| if (pei_data->saved_data) { |
| /* MRC cache found */ |
| pei_data->saved_data_size = mrc_size; |
| } else if (pei_data->boot_mode == ACPI_S3) { |
| /* Waking from S3 and no cache. */ |
| printk(BIOS_DEBUG, |
| "No MRC cache found in S3 resume path.\n"); |
| post_code(POST_RESUME_FAILURE); |
| system_reset(); |
| } else { |
| printk(BIOS_DEBUG, "No MRC cache found.\n"); |
| } |
| } |
| |
| /* |
| * Do not use saved pei data. Can be set by mainboard romstage |
| * to force a full train of memory on every boot. |
| */ |
| if (pei_data->disable_saved_data) { |
| printk(BIOS_DEBUG, "Disabling PEI saved data by request\n"); |
| pei_data->saved_data = NULL; |
| pei_data->saved_data_size = 0; |
| } |
| |
| /* Determine if mrc.bin is in the cbfs. */ |
| if (cbfs_locate_file_in_region(&f, "COREBOOT", "mrc.bin", &type) < 0) |
| die("mrc.bin not found!"); |
| /* We don't care about leaking the mapping */ |
| entry = (pei_wrapper_entry_t)rdev_mmap_full(&f.data); |
| if (entry == NULL) { |
| printk(BIOS_DEBUG, "Couldn't find mrc.bin\n"); |
| return; |
| } |
| |
| printk(BIOS_DEBUG, "Starting Memory Reference Code\n"); |
| |
| ret = entry(pei_data); |
| if (ret < 0) |
| die("pei_data version mismatch\n"); |
| |
| /* Print the MRC version after executing the UEFI PEI stage. */ |
| u32 version = MCHBAR32(MCHBAR_PEI_VERSION); |
| printk(BIOS_DEBUG, "MRC Version %d.%d.%d Build %d\n", |
| version >> 24, (version >> 16) & 0xff, |
| (version >> 8) & 0xff, version & 0xff); |
| |
| report_memory_config(); |
| |
| if (pei_data->boot_mode != ACPI_S3) { |
| cbmem_initialize_empty(); |
| } else if (cbmem_initialize()) { |
| printk(BIOS_DEBUG, "Failed to recover CBMEM in S3 resume.\n"); |
| /* Failed S3 resume, reset to come up cleanly */ |
| system_reset(); |
| } |
| |
| printk(BIOS_DEBUG, "MRC data at %p %d bytes\n", pei_data->data_to_save, |
| pei_data->data_to_save_size); |
| |
| if (pei_data->data_to_save != NULL && pei_data->data_to_save_size > 0) |
| mrc_cache_stash_data(MRC_TRAINING_DATA, 0, |
| pei_data->data_to_save, |
| pei_data->data_to_save_size); |
| |
| printk(BIOS_DEBUG, "create cbmem for dimm information\n"); |
| mem_info = cbmem_add(CBMEM_ID_MEMINFO, sizeof(struct memory_info)); |
| |
| if (!mem_info) { |
| printk(BIOS_ERR, "Error! Failed to add mem_info to cbmem\n"); |
| return; |
| } |
| |
| memset(mem_info, 0, sizeof(*mem_info)); |
| /* Translate pei_memory_info struct data into memory_info struct */ |
| mem_info->dimm_cnt = pei_data->meminfo.dimm_cnt; |
| for (int i = 0; i < MIN(DIMM_INFO_TOTAL, PEI_DIMM_INFO_TOTAL); i++) { |
| struct dimm_info *dimm = &mem_info->dimm[i]; |
| const struct pei_dimm_info *pei_dimm = |
| &pei_data->meminfo.dimm[i]; |
| dimm->dimm_size = pei_dimm->dimm_size; |
| dimm->ddr_type = pei_dimm->ddr_type; |
| dimm->ddr_frequency = pei_dimm->ddr_frequency; |
| dimm->rank_per_dimm = pei_dimm->rank_per_dimm; |
| dimm->channel_num = pei_dimm->channel_num; |
| dimm->dimm_num = pei_dimm->dimm_num; |
| dimm->bank_locator = pei_dimm->bank_locator; |
| memcpy(&dimm->serial, &pei_dimm->serial, |
| MIN(sizeof(dimm->serial), sizeof(pei_dimm->serial))); |
| memcpy(&dimm->module_part_number, |
| &pei_dimm->module_part_number, |
| MIN(sizeof(dimm->module_part_number), |
| sizeof(pei_dimm->module_part_number))); |
| dimm->module_part_number[DIMM_INFO_PART_NUMBER_SIZE - 1] = '\0'; |
| dimm->mod_id = pei_dimm->mod_id; |
| dimm->mod_type = pei_dimm->mod_type; |
| dimm->bus_width = pei_dimm->bus_width; |
| } |
| } |