| chip soc/intel/cannonlake |
| # Enable Enhanced Intel SpeedStep |
| register "eist_enable" = "1" |
| |
| register "cpu_pl2_4_cfg" = "baseline" |
| |
| register "gen1_dec" = "0x00fc0201" |
| register "gen2_dec" = "0x007c0a01" |
| register "gen3_dec" = "0x000c03e1" |
| register "gen4_dec" = "0x001c02e1" |
| |
| # GPIO |
| register "PchUnlockGpioPads" = "1" |
| register "gpe0_dw0" = "0x2" |
| register "gpe0_dw1" = "0x3" |
| register "gpe0_dw2" = "0xd" |
| |
| # FSP configuration |
| register "SaGv" = "SaGv_Enabled" |
| register "ScsEmmcHs400Enabled" = "1" |
| |
| # Enable eDP device |
| register "DdiPortEdp" = "1" # Display Port |
| |
| # Enable HPD for DDI ports B/C |
| register "DdiPortBHpd" = "1" # HDMI |
| register "DdiPortCHpd" = "1" # USB Type-C |
| |
| # Enable DDC for DDI port B |
| register "DdiPortBDdc" = "1" # HDMI |
| |
| register "PchHdaAudioLinkHda" = "1" |
| |
| # Misc |
| register "AcousticNoiseMitigation" = "1" |
| |
| # Power |
| register "PchPmSlpS3MinAssert" = "3" # 50ms |
| register "PchPmSlpS4MinAssert" = "1" # 1s |
| register "PchPmSlpSusMinAssert" = "2" # 500ms |
| register "PchPmSlpAMinAssert" = "4" # 2s |
| |
| register "tcc_offset" = "20" # TCC of 80C |
| |
| # Enable SERIRQ continuous |
| register "serirq_mode" = "SERIRQ_CONTINUOUS" |
| |
| register "SkipExtGfxScan" = "1" |
| |
| register "enable_c6dram" = "1" |
| |
| register "SataPortsEnable[0]" = "1" |
| register "SataPortsEnable[2]" = "1" |
| |
| register "PcieRpEnable[4]" = "1" # LAN1 |
| register "PcieRpEnable[5]" = "1" # LAN2 |
| register "PcieRpEnable[6]" = "1" # LAN3 |
| register "PcieRpEnable[7]" = "1" # LAN4 |
| register "PcieRpEnable[8]" = "1" # LAN5 |
| register "PcieRpEnable[9]" = "1" # LAN6 |
| register "PcieRpEnable[11]" = "1" # M.2 WiFi |
| register "PcieRpEnable[12]" = "1" # M.2 NVMe x4 |
| |
| # Enable Advanced Error Reporting for RP 5-10, 12, 13 |
| register "PcieRpAdvancedErrorReporting[4]" = "1" |
| register "PcieRpAdvancedErrorReporting[5]" = "1" |
| register "PcieRpAdvancedErrorReporting[6]" = "1" |
| register "PcieRpAdvancedErrorReporting[7]" = "1" |
| register "PcieRpAdvancedErrorReporting[8]" = "1" |
| register "PcieRpAdvancedErrorReporting[9]" = "1" |
| register "PcieRpAdvancedErrorReporting[11]" = "1" |
| register "PcieRpAdvancedErrorReporting[12]" = "1" |
| |
| # Enable Latency Tolerance Reporting Mechanism RP 5-10, 12, 13 |
| register "PcieRpLtrEnable[4]" = "1" |
| register "PcieRpLtrEnable[5]" = "1" |
| register "PcieRpLtrEnable[6]" = "1" |
| register "PcieRpLtrEnable[7]" = "1" |
| register "PcieRpLtrEnable[8]" = "1" |
| register "PcieRpLtrEnable[9]" = "1" |
| register "PcieRpLtrEnable[11]" = "1" |
| register "PcieRpLtrEnable[12]" = "1" |
| |
| register "PcieClkSrcUsage[0]" = "PCIE_CLK_FREE" |
| register "PcieClkSrcUsage[1]" = "PCIE_CLK_FREE" |
| register "PcieClkSrcUsage[2]" = "PCIE_CLK_FREE" |
| register "PcieClkSrcUsage[3]" = "PCIE_CLK_FREE" |
| register "PcieClkSrcUsage[4]" = "PCIE_CLK_FREE" |
| register "PcieClkSrcUsage[5]" = "PCIE_CLK_FREE" |
| |
| # USB related |
| register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | |
| USB_PORT_WAKE_ENABLE(2) | |
| USB_PORT_WAKE_ENABLE(3) | |
| USB_PORT_WAKE_ENABLE(4) | |
| USB_PORT_WAKE_ENABLE(5) | |
| USB_PORT_WAKE_ENABLE(6) | |
| USB_PORT_WAKE_ENABLE(7) | |
| USB_PORT_WAKE_ENABLE(8) | |
| USB_PORT_WAKE_ENABLE(9)" |
| |
| register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | |
| USB_PORT_WAKE_ENABLE(2) | |
| USB_PORT_WAKE_ENABLE(3) | |
| USB_PORT_WAKE_ENABLE(4)" |
| |
| register "PchUsb2PhySusPgDisable" = "1" |
| |
| register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" |
| register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" |
| register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC_SKIP)" |
| register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" |
| register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # M2 WiFi |
| register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" |
| register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" |
| register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # 4G/LTE |
| register "usb2_ports[9]" = "USB2_PORT_EMPTY" |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" |
| register "usb3_ports[4]" = "USB3_PORT_EMPTY" |
| register "usb3_ports[5]" = "USB3_PORT_EMPTY" |
| |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C1] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C2] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C3] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C4] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C5] = PchSerialIoDisabled, |
| [PchSerialIoIndexSPI0] = PchSerialIoDisabled, |
| [PchSerialIoIndexSPI1] = PchSerialIoDisabled, |
| [PchSerialIoIndexSPI2] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART0] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoDisabled, |
| }" |
| |
| device cpu_cluster 0 on end |
| device domain 0 on |
| device pci 00.0 on end # Host Bridge |
| device pci 02.0 on end # Integrated Graphics Device |
| device pci 04.0 on end # SA Thermal device |
| device pci 08.0 off end # Gaussian Mixture Model |
| device pci 12.0 on end # Thermal Subsystem |
| device pci 12.5 off end # UFS SCS |
| device pci 12.6 off end # GSPI #2 |
| device pci 14.0 on end # USB xHCI |
| device pci 14.1 off end # USB xDCI (OTG) |
| device pci 14.5 off end # SDCard |
| device pci 15.0 off end # I2C #0 |
| device pci 15.1 off end # I2C #1 |
| device pci 15.2 off end # I2C #2 |
| device pci 15.3 off end # I2C #3 |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT Redirection |
| device pci 16.4 off end # Management Engine Interface 3 |
| device pci 16.5 off end # Management Engine Interface 4 |
| device pci 17.0 on end # SATA |
| device pci 19.0 off end # I2C #4 |
| device pci 19.1 off end # I2C #5 |
| device pci 19.2 off end # UART #2 |
| device pci 1a.0 on end # eMMC |
| device pci 1c.0 off end # PCI Express Port 1 |
| device pci 1c.1 off end # PCI Express Port 2 |
| device pci 1c.2 off end # PCI Express Port 3 |
| device pci 1c.3 off end # PCI Express Port 4 |
| device pci 1c.4 on end # PCI Express Port 5 LAN1 |
| device pci 1c.5 on end # PCI Express Port 6 LAN2 |
| device pci 1c.6 on end # PCI Express Port 7 LAN3 |
| device pci 1c.7 on end # PCI Express Port 8 LAN4 |
| device pci 1d.0 on end # PCI Express Port 9 LAN5 |
| device pci 1d.1 on end # PCI Express Port 10 LAN6 |
| device pci 1d.2 off end # PCI Express Port 11 |
| device pci 1d.3 on end # PCI Express Port 12 M.2 WiFi |
| smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" |
| "M.2/E 2230 (M2_WIFI2)" "SlotDataBusWidth1X" |
| device pci 1d.4 on # PCI Express Port 13 NVMe |
| smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" |
| "M.2/M 2280 (J1)" "SlotDataBusWidth4X" |
| end |
| device pci 1d.5 off end # PCI Express Port 14 |
| device pci 1d.6 off end # PCI Express Port 15 |
| device pci 1d.7 off end # PCI Express Port 16 |
| device pci 1e.0 off end # UART #0 |
| device pci 1e.1 off end # UART #1 |
| device pci 1e.2 off end # GSPI #0 |
| device pci 1e.3 off end # GSPI #1 |
| device pci 1f.0 on |
| chip superio/ite/it8784e |
| register "TMPIN1.mode" = "THERMAL_RESISTOR" |
| register "TMPIN2.mode" = "THERMAL_MODE_DISABLED" |
| register "TMPIN3.mode" = "THERMAL_PECI" |
| register "TMPIN3.offset" = "0x63" |
| register "ec.vin_mask" = "VIN_ALL" |
| register "ec.smbus_24mhz" = "1" |
| register "ec.smbus_en" = "1" |
| # FAN1 is CPU fan (connector on board) |
| register "FAN1.mode" = "FAN_SMART_AUTOMATIC" |
| register "FAN1.smart.tmpin" = " 3" |
| register "FAN1.smart.tmp_off" = "40" |
| register "FAN1.smart.tmp_start" = "60" |
| register "FAN1.smart.tmp_full" = "85" |
| register "FAN1.smart.tmp_delta" = " 2" |
| register "FAN1.smart.pwm_start" = "20" |
| register "FAN1.smart.slope" = "24" |
| register "FAN2.mode" = "FAN_MODE_OFF" |
| register "FAN3.mode" = "FAN_MODE_OFF" |
| device pnp 2e.1 on # COM 1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.2 on end # COM 2 |
| device pnp 2e.3 off end # Printer Port |
| device pnp 2e.4 on # Environment Controller |
| io 0x60 = 0xa40 |
| io 0x62 = 0xa30 |
| irq 0x70 = 9 |
| irq 0xf0 = 0x80 # clear 3VSB status |
| end |
| device pnp 2e.5 off end # Keyboard |
| device pnp 2e.6 off end # Mouse |
| device pnp 2e.7 off end # GPIO |
| device pnp 2e.a off end # CIR |
| end |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| end # LPC Interface |
| device pci 1f.1 hidden end # P2SB |
| device pci 1f.2 hidden end # Power Management Controller |
| device pci 1f.3 on end # Intel HDA |
| device pci 1f.4 on end # SMBus |
| device pci 1f.5 on end # PCH SPI |
| device pci 1f.6 off end # GbE |
| end |
| end |