| |
| # SPDX-License-Identifier: GPL-2.0-only |
| |
| chip soc/amd/stoneyridge |
| register "spd_addr_lookup" = " |
| { |
| { {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0 |
| }" |
| register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP" |
| register "uma_mode" = "UMAMODE_SPECIFIED_SIZE" |
| register "uma_size" = "32 * MiB" |
| |
| register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | |
| GPIO_I2C2_SCL | GPIO_I2C3_SCL" |
| |
| device domain 0 on |
| device ref iommu off end # IOMMU (Disabled for performance and battery) |
| device ref gfx on end |
| device ref gfx_hda on end |
| device ref gpp_bridge_1 on end # WLAN |
| device ref gpp_bridge_3 on |
| chip drivers/generic/bayhub |
| register "power_saving" = "1" |
| device pci 00.0 on end |
| end |
| end |
| device ref hda_bridge on end |
| device ref hda on end |
| device ref xhci on end |
| device ref ehci on end |
| device ref lpc_bridge on |
| chip ec/google/chromeec |
| device pnp 0c09.0 on end |
| end |
| end |
| device ref sdhci on end |
| end #domain |
| |
| device ref i2c_0 on |
| chip drivers/generic/adau7002 |
| device generic 0.0 on end |
| end |
| chip drivers/i2c/da7219 |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)" |
| register "btn_cfg" = "50" |
| register "mic_det_thr" = "500" |
| register "jack_ins_deb" = "20" |
| register "jack_det_rate" = ""32ms_64ms"" |
| register "jack_rem_deb" = "1" |
| register "a_d_btn_thr" = "0xa" |
| register "d_b_btn_thr" = "0x16" |
| register "b_c_btn_thr" = "0x21" |
| register "c_mic_btn_thr" = "0x3e" |
| register "btn_avg" = "4" |
| register "adc_1bit_rpt" = "1" |
| register "micbias_lvl" = "2600" |
| register "mic_amp_in_sel" = ""diff"" |
| register "mclk_name" = ""oscout1"" |
| device i2c 1a on end |
| end |
| chip drivers/generic/max98357a |
| register "hid" = ""MX98357A"" |
| register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)" |
| register "sdmode_delay" = "5" |
| device generic 0.1 on end |
| end |
| end |
| device ref i2c_1 on |
| chip drivers/i2c/tpm |
| register "hid" = ""GOOG0005"" |
| register "desc" = ""Cr50 TPM"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)" |
| device i2c 50 on end |
| end |
| end |
| device ref i2c_2 on |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0000"" |
| register "desc" = ""ELAN Touchpad"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)" |
| register "wake" = "7" |
| register "detect" = "1" |
| device i2c 15 on end |
| end |
| end |
| device ref i2c_3 on |
| chip drivers/i2c/generic |
| register "hid" = ""RAYD0001"" |
| register "desc" = ""Raydium Touchscreen"" |
| register "detect" = "1" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" |
| register "reset_delay_ms" = "20" |
| register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" |
| register "enable_delay_ms" = "1" |
| register "has_power_resource" = "1" |
| device i2c 39 on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0001"" |
| register "desc" = ""ELAN Touchscreen"" |
| register "detect" = "1" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" |
| register "reset_delay_ms" = "20" |
| register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" |
| register "enable_delay_ms" = "1" |
| register "has_power_resource" = "1" |
| device i2c 10 on end |
| end |
| end |
| |
| device ref uart_0 on end # console |
| |
| end #chip soc/amd/stoneyridge |