| /** @file |
| UDP4 Service Binding Protocol as defined in UEFI specification. |
| |
| The EFI UDPv4 Protocol provides simple packet-oriented services |
| to transmit and receive UDP packets. |
| |
| Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR> |
| SPDX-License-Identifier: BSD-2-Clause-Patent |
| |
| @par Revision Reference: |
| This Protocol is introduced in UEFI Specification 2.0. |
| |
| **/ |
| |
| #ifndef __EFI_UDP4_PROTOCOL_H__ |
| #define __EFI_UDP4_PROTOCOL_H__ |
| |
| #include <Protocol/Ip4.h> |
| // |
| //GUID definitions |
| // |
| #define EFI_UDP4_SERVICE_BINDING_PROTOCOL_GUID \ |
| { \ |
| 0x83f01464, 0x99bd, 0x45e5, {0xb3, 0x83, 0xaf, 0x63, 0x05, 0xd8, 0xe9, 0xe6 } \ |
| } |
| |
| #define EFI_UDP4_PROTOCOL_GUID \ |
| { \ |
| 0x3ad9df29, 0x4501, 0x478d, {0xb1, 0xf8, 0x7f, 0x7f, 0xe7, 0x0e, 0x50, 0xf3 } \ |
| } |
| |
| typedef struct _EFI_UDP4_PROTOCOL EFI_UDP4_PROTOCOL; |
| |
| /// |
| /// EFI_UDP4_SERVICE_POINT is deprecated in the UEFI 2.4B and should not be used any more. |
| /// The definition in here is only present to provide backwards compatability. |
| /// |
| typedef struct { |
| EFI_HANDLE InstanceHandle; |
| EFI_IPv4_ADDRESS LocalAddress; |
| UINT16 LocalPort; |
| EFI_IPv4_ADDRESS RemoteAddress; |
| UINT16 RemotePort; |
| } EFI_UDP4_SERVICE_POINT; |
| |
| /// |
| /// EFI_UDP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not be used any more. |
| /// The definition in here is only present to provide backwards compatability. |
| /// |
| typedef struct { |
| EFI_HANDLE DriverHandle; |
| UINT32 ServiceCount; |
| EFI_UDP4_SERVICE_POINT Services[1]; |
| } EFI_UDP4_VARIABLE_DATA; |
| |
| typedef struct { |
| UINT32 FragmentLength; |
| VOID *FragmentBuffer; |
| } EFI_UDP4_FRAGMENT_DATA; |
| |
| typedef struct { |
| EFI_IPv4_ADDRESS SourceAddress; |
| UINT16 SourcePort; |
| EFI_IPv4_ADDRESS DestinationAddress; |
| UINT16 DestinationPort; |
| } EFI_UDP4_SESSION_DATA; |
| typedef struct { |
| // |
| // Receiving Filters |
| // |
| BOOLEAN AcceptBroadcast; |
| BOOLEAN AcceptPromiscuous; |
| BOOLEAN AcceptAnyPort; |
| BOOLEAN AllowDuplicatePort; |
| // |
| // I/O parameters |
| // |
| UINT8 TypeOfService; |
| UINT8 TimeToLive; |
| BOOLEAN DoNotFragment; |
| UINT32 ReceiveTimeout; |
| UINT32 TransmitTimeout; |
| // |
| // Access Point |
| // |
| BOOLEAN UseDefaultAddress; |
| EFI_IPv4_ADDRESS StationAddress; |
| EFI_IPv4_ADDRESS SubnetMask; |
| UINT16 StationPort; |
| EFI_IPv4_ADDRESS RemoteAddress; |
| UINT16 RemotePort; |
| } EFI_UDP4_CONFIG_DATA; |
| |
| typedef struct { |
| EFI_UDP4_SESSION_DATA *UdpSessionData; //OPTIONAL |
| EFI_IPv4_ADDRESS *GatewayAddress; //OPTIONAL |
| UINT32 DataLength; |
| UINT32 FragmentCount; |
| EFI_UDP4_FRAGMENT_DATA FragmentTable[1]; |
| } EFI_UDP4_TRANSMIT_DATA; |
| |
| typedef struct { |
| EFI_TIME TimeStamp; |
| EFI_EVENT RecycleSignal; |
| EFI_UDP4_SESSION_DATA UdpSession; |
| UINT32 DataLength; |
| UINT32 FragmentCount; |
| EFI_UDP4_FRAGMENT_DATA FragmentTable[1]; |
| } EFI_UDP4_RECEIVE_DATA; |
| |
| |
| typedef struct { |
| EFI_EVENT Event; |
| EFI_STATUS Status; |
| union { |
| EFI_UDP4_RECEIVE_DATA *RxData; |
| EFI_UDP4_TRANSMIT_DATA *TxData; |
| } Packet; |
| } EFI_UDP4_COMPLETION_TOKEN; |
| |
| /** |
| Reads the current operational settings. |
| |
| The GetModeData() function copies the current operational settings of this EFI |
| UDPv4 Protocol instance into user-supplied buffers. This function is used |
| optionally to retrieve the operational mode data of underlying networks or |
| drivers. |
| |
| @param This The pointer to the EFI_UDP4_PROTOCOL instance. |
| @param Udp4ConfigData The pointer to the buffer to receive the current configuration data. |
| @param Ip4ModeData The pointer to the EFI IPv4 Protocol mode data structure. |
| @param MnpConfigData The pointer to the managed network configuration data structure. |
| @param SnpModeData The pointer to the simple network mode data structure. |
| |
| @retval EFI_SUCCESS The mode data was read. |
| @retval EFI_NOT_STARTED When Udp4ConfigData is queried, no configuration data is |
| available because this instance has not been started. |
| @retval EFI_INVALID_PARAMETER This is NULL. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_UDP4_GET_MODE_DATA)( |
| IN EFI_UDP4_PROTOCOL *This, |
| OUT EFI_UDP4_CONFIG_DATA *Udp4ConfigData OPTIONAL, |
| OUT EFI_IP4_MODE_DATA *Ip4ModeData OPTIONAL, |
| OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL, |
| OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL |
| ); |
| |
| |
| /** |
| Initializes, changes, or resets the operational parameters for this instance of the EFI UDPv4 |
| Protocol. |
| |
| The Configure() function is used to do the following: |
| * Initialize and start this instance of the EFI UDPv4 Protocol. |
| * Change the filtering rules and operational parameters. |
| * Reset this instance of the EFI UDPv4 Protocol. |
| Until these parameters are initialized, no network traffic can be sent or |
| received by this instance. This instance can be also reset by calling Configure() |
| with UdpConfigData set to NULL. Once reset, the receiving queue and transmitting |
| queue are flushed and no traffic is allowed through this instance. |
| With different parameters in UdpConfigData, Configure() can be used to bind |
| this instance to specified port. |
| |
| @param This The pointer to the EFI_UDP4_PROTOCOL instance. |
| @param Udp4ConfigData The pointer to the buffer to receive the current configuration data. |
| |
| @retval EFI_SUCCESS The configuration settings were set, changed, or reset successfully. |
| @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, |
| RARP, etc.) is not finished yet. |
| @retval EFI_INVALID_PARAMETER This is NULL. |
| @retval EFI_INVALID_PARAMETER UdpConfigData.StationAddress is not a valid unicast IPv4 address. |
| @retval EFI_INVALID_PARAMETER UdpConfigData.SubnetMask is not a valid IPv4 address mask. The subnet |
| mask must be contiguous. |
| @retval EFI_INVALID_PARAMETER UdpConfigData.RemoteAddress is not a valid unicast IPv4 address if it |
| is not zero. |
| @retval EFI_ALREADY_STARTED The EFI UDPv4 Protocol instance is already started/configured |
| and must be stopped/reset before it can be reconfigured. |
| @retval EFI_ACCESS_DENIED UdpConfigData. AllowDuplicatePort is FALSE |
| and UdpConfigData.StationPort is already used by |
| other instance. |
| @retval EFI_OUT_OF_RESOURCES The EFI UDPv4 Protocol driver cannot allocate memory for this |
| EFI UDPv4 Protocol instance. |
| @retval EFI_DEVICE_ERROR An unexpected network or system error occurred and this instance |
| was not opened. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_UDP4_CONFIGURE)( |
| IN EFI_UDP4_PROTOCOL *This, |
| IN EFI_UDP4_CONFIG_DATA *UdpConfigData OPTIONAL |
| ); |
| |
| /** |
| Joins and leaves multicast groups. |
| |
| The Groups() function is used to enable and disable the multicast group |
| filtering. If the JoinFlag is FALSE and the MulticastAddress is NULL, then all |
| currently joined groups are left. |
| |
| @param This The pointer to the EFI_UDP4_PROTOCOL instance. |
| @param JoinFlag Set to TRUE to join a multicast group. Set to FALSE to leave one |
| or all multicast groups. |
| @param MulticastAddress The pointer to multicast group address to join or leave. |
| |
| @retval EFI_SUCCESS The operation completed successfully. |
| @retval EFI_NOT_STARTED The EFI UDPv4 Protocol instance has not been started. |
| @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, |
| RARP, etc.) is not finished yet. |
| @retval EFI_OUT_OF_RESOURCES Could not allocate resources to join the group. |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: |
| - This is NULL. |
| - JoinFlag is TRUE and MulticastAddress is NULL. |
| - JoinFlag is TRUE and *MulticastAddress is not |
| a valid multicast address. |
| @retval EFI_ALREADY_STARTED The group address is already in the group table (when |
| JoinFlag is TRUE). |
| @retval EFI_NOT_FOUND The group address is not in the group table (when JoinFlag is |
| FALSE). |
| @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_UDP4_GROUPS)( |
| IN EFI_UDP4_PROTOCOL *This, |
| IN BOOLEAN JoinFlag, |
| IN EFI_IPv4_ADDRESS *MulticastAddress OPTIONAL |
| ); |
| |
| /** |
| Adds and deletes routing table entries. |
| |
| The Routes() function adds a route to or deletes a route from the routing table. |
| Routes are determined by comparing the SubnetAddress with the destination IP |
| address and arithmetically AND-ing it with the SubnetMask. The gateway address |
| must be on the same subnet as the configured station address. |
| The default route is added with SubnetAddress and SubnetMask both set to 0.0.0.0. |
| The default route matches all destination IP addresses that do not match any |
| other routes. |
| A zero GatewayAddress is a nonroute. Packets are sent to the destination IP |
| address if it can be found in the Address Resolution Protocol (ARP) cache or |
| on the local subnet. One automatic nonroute entry will be inserted into the |
| routing table for outgoing packets that are addressed to a local subnet |
| (gateway address of 0.0.0.0). |
| Each instance of the EFI UDPv4 Protocol has its own independent routing table. |
| Instances of the EFI UDPv4 Protocol that use the default IP address will also |
| have copies of the routing table provided by the EFI_IP4_CONFIG_PROTOCOL. These |
| copies will be updated automatically whenever the IP driver reconfigures its |
| instances; as a result, the previous modification to these copies will be lost. |
| |
| @param This The pointer to the EFI_UDP4_PROTOCOL instance. |
| @param DeleteRoute Set to TRUE to delete this route from the routing table. |
| Set to FALSE to add this route to the routing table. |
| @param SubnetAddress The destination network address that needs to be routed. |
| @param SubnetMask The subnet mask of SubnetAddress. |
| @param GatewayAddress The gateway IP address for this route. |
| |
| @retval EFI_SUCCESS The operation completed successfully. |
| @retval EFI_NOT_STARTED The EFI UDPv4 Protocol instance has not been started. |
| @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, |
| - RARP, etc.) is not finished yet. |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. |
| @retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table. |
| @retval EFI_NOT_FOUND This route is not in the routing table. |
| @retval EFI_ACCESS_DENIED The route is already defined in the routing table. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_UDP4_ROUTES)( |
| IN EFI_UDP4_PROTOCOL *This, |
| IN BOOLEAN DeleteRoute, |
| IN EFI_IPv4_ADDRESS *SubnetAddress, |
| IN EFI_IPv4_ADDRESS *SubnetMask, |
| IN EFI_IPv4_ADDRESS *GatewayAddress |
| ); |
| |
| /** |
| Polls for incoming data packets and processes outgoing data packets. |
| |
| The Poll() function can be used by network drivers and applications to increase |
| the rate that data packets are moved between the communications device and the |
| transmit and receive queues. |
| In some systems, the periodic timer event in the managed network driver may not |
| poll the underlying communications device fast enough to transmit and/or receive |
| all data packets without missing incoming packets or dropping outgoing packets. |
| Drivers and applications that are experiencing packet loss should try calling |
| the Poll() function more often. |
| |
| @param This The pointer to the EFI_UDP4_PROTOCOL instance. |
| |
| @retval EFI_SUCCESS Incoming or outgoing data was processed. |
| @retval EFI_INVALID_PARAMETER This is NULL. |
| @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. |
| @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_UDP4_POLL)( |
| IN EFI_UDP4_PROTOCOL *This |
| ); |
| |
| /** |
| Places an asynchronous receive request into the receiving queue. |
| |
| The Receive() function places a completion token into the receive packet queue. |
| This function is always asynchronous. |
| The caller must fill in the Token.Event field in the completion token, and this |
| field cannot be NULL. When the receive operation completes, the EFI UDPv4 Protocol |
| driver updates the Token.Status and Token.Packet.RxData fields and the Token.Event |
| is signaled. Providing a proper notification function and context for the event |
| will enable the user to receive the notification and receiving status. That |
| notification function is guaranteed to not be re-entered. |
| |
| @param This The pointer to the EFI_UDP4_PROTOCOL instance. |
| @param Token The pointer to a token that is associated with the receive data |
| descriptor. |
| |
| @retval EFI_SUCCESS The receive completion token was cached. |
| @retval EFI_NOT_STARTED This EFI UDPv4 Protocol instance has not been started. |
| @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, RARP, etc.) |
| is not finished yet. |
| @retval EFI_INVALID_PARAMETER This is NULL. |
| @retval EFI_INVALID_PARAMETER Token is NULL. |
| @retval EFI_INVALID_PARAMETER Token.Event is NULL. |
| @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system |
| resources (usually memory). |
| @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. |
| @retval EFI_ACCESS_DENIED A receive completion token with the same Token.Event was already in |
| the receive queue. |
| @retval EFI_NOT_READY The receive request could not be queued because the receive queue is full. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_UDP4_RECEIVE)( |
| IN EFI_UDP4_PROTOCOL *This, |
| IN EFI_UDP4_COMPLETION_TOKEN *Token |
| ); |
| |
| /** |
| Queues outgoing data packets into the transmit queue. |
| |
| The Transmit() function places a sending request to this instance of the EFI |
| UDPv4 Protocol, alongside the transmit data that was filled by the user. Whenever |
| the packet in the token is sent out or some errors occur, the Token.Event will |
| be signaled and Token.Status is updated. Providing a proper notification function |
| and context for the event will enable the user to receive the notification and |
| transmitting status. |
| |
| @param This The pointer to the EFI_UDP4_PROTOCOL instance. |
| @param Token The pointer to the completion token that will be placed into the |
| transmit queue. |
| |
| @retval EFI_SUCCESS The data has been queued for transmission. |
| @retval EFI_NOT_STARTED This EFI UDPv4 Protocol instance has not been started. |
| @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, |
| RARP, etc.) is not finished yet. |
| @retval EFI_INVALID_PARAMETER One or more parameters are invalid. |
| @retval EFI_ACCESS_DENIED The transmit completion token with the same |
| Token.Event was already in the transmit queue. |
| @retval EFI_NOT_READY The completion token could not be queued because the |
| transmit queue is full. |
| @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data. |
| @retval EFI_NOT_FOUND There is no route to the destination network or address. |
| @retval EFI_BAD_BUFFER_SIZE The data length is greater than the maximum UDP packet |
| size. Or the length of the IP header + UDP header + data |
| length is greater than MTU if DoNotFragment is TRUE. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_UDP4_TRANSMIT)( |
| IN EFI_UDP4_PROTOCOL *This, |
| IN EFI_UDP4_COMPLETION_TOKEN *Token |
| ); |
| |
| /** |
| Aborts an asynchronous transmit or receive request. |
| |
| The Cancel() function is used to abort a pending transmit or receive request. |
| If the token is in the transmit or receive request queues, after calling this |
| function, Token.Status will be set to EFI_ABORTED and then Token.Event will be |
| signaled. If the token is not in one of the queues, which usually means that |
| the asynchronous operation has completed, this function will not signal the |
| token and EFI_NOT_FOUND is returned. |
| |
| @param This The pointer to the EFI_UDP4_PROTOCOL instance. |
| @param Token The pointer to a token that has been issued by |
| EFI_UDP4_PROTOCOL.Transmit() or |
| EFI_UDP4_PROTOCOL.Receive().If NULL, all pending |
| tokens are aborted. |
| |
| @retval EFI_SUCCESS The asynchronous I/O request was aborted and Token.Event |
| was signaled. When Token is NULL, all pending requests are |
| aborted and their events are signaled. |
| @retval EFI_INVALID_PARAMETER This is NULL. |
| @retval EFI_NOT_STARTED This instance has not been started. |
| @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, |
| RARP, etc.) is not finished yet. |
| @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O request was |
| not found in the transmit or receive queue. It has either completed |
| or was not issued by Transmit() and Receive(). |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_UDP4_CANCEL)( |
| IN EFI_UDP4_PROTOCOL *This, |
| IN EFI_UDP4_COMPLETION_TOKEN *Token OPTIONAL |
| ); |
| |
| /// |
| /// The EFI_UDP4_PROTOCOL defines an EFI UDPv4 Protocol session that can be used |
| /// by any network drivers, applications, or daemons to transmit or receive UDP packets. |
| /// This protocol instance can either be bound to a specified port as a service or |
| /// connected to some remote peer as an active client. Each instance has its own settings, |
| /// such as the routing table and group table, which are independent from each other. |
| /// |
| struct _EFI_UDP4_PROTOCOL { |
| EFI_UDP4_GET_MODE_DATA GetModeData; |
| EFI_UDP4_CONFIGURE Configure; |
| EFI_UDP4_GROUPS Groups; |
| EFI_UDP4_ROUTES Routes; |
| EFI_UDP4_TRANSMIT Transmit; |
| EFI_UDP4_RECEIVE Receive; |
| EFI_UDP4_CANCEL Cancel; |
| EFI_UDP4_POLL Poll; |
| }; |
| |
| extern EFI_GUID gEfiUdp4ServiceBindingProtocolGuid; |
| extern EFI_GUID gEfiUdp4ProtocolGuid; |
| |
| #endif |