| /** @file |
| EFI ARP Protocol Definition |
| |
| The EFI ARP Service Binding Protocol is used to locate EFI |
| ARP Protocol drivers to create and destroy child of the |
| driver to communicate with other host using ARP protocol. |
| The EFI ARP Protocol provides services to map IP network |
| address to hardware address used by a data link protocol. |
| |
| Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR> |
| SPDX-License-Identifier: BSD-2-Clause-Patent |
| |
| @par Revision Reference: |
| This Protocol was introduced in UEFI Specification 2.0. |
| |
| **/ |
| |
| #ifndef __EFI_ARP_PROTOCOL_H__ |
| #define __EFI_ARP_PROTOCOL_H__ |
| |
| #define EFI_ARP_SERVICE_BINDING_PROTOCOL_GUID \ |
| { \ |
| 0xf44c00ee, 0x1f2c, 0x4a00, {0xaa, 0x9, 0x1c, 0x9f, 0x3e, 0x8, 0x0, 0xa3 } \ |
| } |
| |
| #define EFI_ARP_PROTOCOL_GUID \ |
| { \ |
| 0xf4b427bb, 0xba21, 0x4f16, {0xbc, 0x4e, 0x43, 0xe4, 0x16, 0xab, 0x61, 0x9c } \ |
| } |
| |
| typedef struct _EFI_ARP_PROTOCOL EFI_ARP_PROTOCOL; |
| |
| typedef struct { |
| /// |
| /// Length in bytes of this entry. |
| /// |
| UINT32 Size; |
| |
| /// |
| /// Set to TRUE if this entry is a "deny" entry. |
| /// Set to FALSE if this entry is a "normal" entry. |
| /// |
| BOOLEAN DenyFlag; |
| |
| /// |
| /// Set to TRUE if this entry will not time out. |
| /// Set to FALSE if this entry will time out. |
| /// |
| BOOLEAN StaticFlag; |
| |
| /// |
| /// 16-bit ARP hardware identifier number. |
| /// |
| UINT16 HwAddressType; |
| |
| /// |
| /// 16-bit protocol type number. |
| /// |
| UINT16 SwAddressType; |
| |
| /// |
| /// The length of the hardware address. |
| /// |
| UINT8 HwAddressLength; |
| |
| /// |
| /// The length of the protocol address. |
| /// |
| UINT8 SwAddressLength; |
| } EFI_ARP_FIND_DATA; |
| |
| typedef struct { |
| /// |
| /// 16-bit protocol type number in host byte order. |
| /// |
| UINT16 SwAddressType; |
| |
| /// |
| /// The length in bytes of the station's protocol address to register. |
| /// |
| UINT8 SwAddressLength; |
| |
| /// |
| /// The pointer to the first byte of the protocol address to register. For |
| /// example, if SwAddressType is 0x0800 (IP), then |
| /// StationAddress points to the first byte of this station's IP |
| /// address stored in network byte order. |
| /// |
| VOID *StationAddress; |
| |
| /// |
| /// The timeout value in 100-ns units that is associated with each |
| /// new dynamic ARP cache entry. If it is set to zero, the value is |
| /// implementation-specific. |
| /// |
| UINT32 EntryTimeOut; |
| |
| /// |
| /// The number of retries before a MAC address is resolved. If it is |
| /// set to zero, the value is implementation-specific. |
| /// |
| UINT32 RetryCount; |
| |
| /// |
| /// The timeout value in 100-ns units that is used to wait for the ARP |
| /// reply packet or the timeout value between two retries. Set to zero |
| /// to use implementation-specific value. |
| /// |
| UINT32 RetryTimeOut; |
| } EFI_ARP_CONFIG_DATA; |
| |
| |
| /** |
| This function is used to assign a station address to the ARP cache for this instance |
| of the ARP driver. |
| |
| Each ARP instance has one station address. The EFI_ARP_PROTOCOL driver will |
| respond to ARP requests that match this registered station address. A call to |
| this function with the ConfigData field set to NULL will reset this ARP instance. |
| |
| Once a protocol type and station address have been assigned to this ARP instance, |
| all the following ARP functions will use this information. Attempting to change |
| the protocol type or station address to a configured ARP instance will result in errors. |
| |
| @param This The pointer to the EFI_ARP_PROTOCOL instance. |
| @param ConfigData The pointer to the EFI_ARP_CONFIG_DATA structure. |
| |
| @retval EFI_SUCCESS The new station address was successfully |
| registered. |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: |
| * This is NULL. |
| * SwAddressLength is zero when ConfigData is not NULL. |
| * StationAddress is NULL when ConfigData is not NULL. |
| @retval EFI_ACCESS_DENIED The SwAddressType, SwAddressLength, or |
| StationAddress is different from the one that is |
| already registered. |
| @retval EFI_OUT_OF_RESOURCES Storage for the new StationAddress could not be |
| allocated. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_ARP_CONFIGURE)( |
| IN EFI_ARP_PROTOCOL *This, |
| IN EFI_ARP_CONFIG_DATA *ConfigData OPTIONAL |
| ); |
| |
| /** |
| This function is used to insert entries into the ARP cache. |
| |
| ARP cache entries are typically inserted and updated by network protocol drivers |
| as network traffic is processed. Most ARP cache entries will time out and be |
| deleted if the network traffic stops. ARP cache entries that were inserted |
| by the Add() function may be static (will not time out) or dynamic (will time out). |
| Default ARP cache timeout values are not covered in most network protocol |
| specifications (although RFC 1122 comes pretty close) and will only be |
| discussed in general terms in this specification. The timeout values that are |
| used in the EFI Sample Implementation should be used only as a guideline. |
| Final product implementations of the EFI network stack should be tuned for |
| their expected network environments. |
| |
| @param This Pointer to the EFI_ARP_PROTOCOL instance. |
| @param DenyFlag Set to TRUE if this entry is a deny entry. Set to |
| FALSE if this entry is a normal entry. |
| @param TargetSwAddress Pointer to a protocol address to add (or deny). |
| May be set to NULL if DenyFlag is TRUE. |
| @param TargetHwAddress Pointer to a hardware address to add (or deny). |
| May be set to NULL if DenyFlag is TRUE. |
| @param TimeoutValue Time in 100-ns units that this entry will remain |
| in the ARP cache. A value of zero means that the |
| entry is permanent. A nonzero value will override |
| the one given by Configure() if the entry to be |
| added is a dynamic entry. |
| @param Overwrite If TRUE, the matching cache entry will be |
| overwritten with the supplied parameters. If |
| FALSE, EFI_ACCESS_DENIED is returned if the |
| corresponding cache entry already exists. |
| |
| @retval EFI_SUCCESS The entry has been added or updated. |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: |
| * This is NULL. |
| * DenyFlag is FALSE and TargetHwAddress is NULL. |
| * DenyFlag is FALSE and TargetSwAddress is NULL. |
| * TargetHwAddress is NULL and TargetSwAddress is NULL. |
| * Neither TargetSwAddress nor TargetHwAddress are NULL when DenyFlag is |
| TRUE. |
| @retval EFI_OUT_OF_RESOURCES The new ARP cache entry could not be allocated. |
| @retval EFI_ACCESS_DENIED The ARP cache entry already exists and Overwrite |
| is not true. |
| @retval EFI_NOT_STARTED The ARP driver instance has not been configured. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_ARP_ADD)( |
| IN EFI_ARP_PROTOCOL *This, |
| IN BOOLEAN DenyFlag, |
| IN VOID *TargetSwAddress OPTIONAL, |
| IN VOID *TargetHwAddress OPTIONAL, |
| IN UINT32 TimeoutValue, |
| IN BOOLEAN Overwrite |
| ); |
| |
| /** |
| This function searches the ARP cache for matching entries and allocates a buffer into |
| which those entries are copied. |
| |
| The first part of the allocated buffer is EFI_ARP_FIND_DATA, following which |
| are protocol address pairs and hardware address pairs. |
| When finding a specific protocol address (BySwAddress is TRUE and AddressBuffer |
| is not NULL), the ARP cache timeout for the found entry is reset if Refresh is |
| set to TRUE. If the found ARP cache entry is a permanent entry, it is not |
| affected by Refresh. |
| |
| @param This The pointer to the EFI_ARP_PROTOCOL instance. |
| @param BySwAddress Set to TRUE to look for matching software protocol |
| addresses. Set to FALSE to look for matching |
| hardware protocol addresses. |
| @param AddressBuffer The pointer to the address buffer. Set to NULL |
| to match all addresses. |
| @param EntryLength The size of an entry in the entries buffer. |
| @param EntryCount The number of ARP cache entries that are found by |
| the specified criteria. |
| @param Entries The pointer to the buffer that will receive the ARP |
| cache entries. |
| @param Refresh Set to TRUE to refresh the timeout value of the |
| matching ARP cache entry. |
| |
| @retval EFI_SUCCESS The requested ARP cache entries were copied into |
| the buffer. |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: |
| This is NULL. Both EntryCount and EntryLength are |
| NULL, when Refresh is FALSE. |
| @retval EFI_NOT_FOUND No matching entries were found. |
| @retval EFI_NOT_STARTED The ARP driver instance has not been configured. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_ARP_FIND)( |
| IN EFI_ARP_PROTOCOL *This, |
| IN BOOLEAN BySwAddress, |
| IN VOID *AddressBuffer OPTIONAL, |
| OUT UINT32 *EntryLength OPTIONAL, |
| OUT UINT32 *EntryCount OPTIONAL, |
| OUT EFI_ARP_FIND_DATA **Entries OPTIONAL, |
| IN BOOLEAN Refresh |
| ); |
| |
| |
| /** |
| This function removes specified ARP cache entries. |
| |
| @param This The pointer to the EFI_ARP_PROTOCOL instance. |
| @param BySwAddress Set to TRUE to delete matching protocol addresses. |
| Set to FALSE to delete matching hardware |
| addresses. |
| @param AddressBuffer The pointer to the address buffer that is used as a |
| key to look for the cache entry. Set to NULL to |
| delete all entries. |
| |
| @retval EFI_SUCCESS The entry was removed from the ARP cache. |
| @retval EFI_INVALID_PARAMETER This is NULL. |
| @retval EFI_NOT_FOUND The specified deletion key was not found. |
| @retval EFI_NOT_STARTED The ARP driver instance has not been configured. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_ARP_DELETE)( |
| IN EFI_ARP_PROTOCOL *This, |
| IN BOOLEAN BySwAddress, |
| IN VOID *AddressBuffer OPTIONAL |
| ); |
| |
| /** |
| This function delete all dynamic entries from the ARP cache that match the specified |
| software protocol type. |
| |
| @param This The pointer to the EFI_ARP_PROTOCOL instance. |
| |
| @retval EFI_SUCCESS The cache has been flushed. |
| @retval EFI_INVALID_PARAMETER This is NULL. |
| @retval EFI_NOT_FOUND There are no matching dynamic cache entries. |
| @retval EFI_NOT_STARTED The ARP driver instance has not been configured. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_ARP_FLUSH)( |
| IN EFI_ARP_PROTOCOL *This |
| ); |
| |
| /** |
| This function tries to resolve the TargetSwAddress and optionally returns a |
| TargetHwAddress if it already exists in the ARP cache. |
| |
| @param This The pointer to the EFI_ARP_PROTOCOL instance. |
| @param TargetSwAddress The pointer to the protocol address to resolve. |
| @param ResolvedEvent The pointer to the event that will be signaled when |
| the address is resolved or some error occurs. |
| @param TargetHwAddress The pointer to the buffer for the resolved hardware |
| address in network byte order. |
| |
| @retval EFI_SUCCESS The data is copied from the ARP cache into the |
| TargetHwAddress buffer. |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: |
| This is NULL. TargetHwAddress is NULL. |
| @retval EFI_ACCESS_DENIED The requested address is not present in the normal |
| ARP cache but is present in the deny address list. |
| Outgoing traffic to that address is forbidden. |
| @retval EFI_NOT_STARTED The ARP driver instance has not been configured. |
| @retval EFI_NOT_READY The request has been started and is not finished. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_ARP_REQUEST)( |
| IN EFI_ARP_PROTOCOL *This, |
| IN VOID *TargetSwAddress OPTIONAL, |
| IN EFI_EVENT ResolvedEvent OPTIONAL, |
| OUT VOID *TargetHwAddress |
| ); |
| |
| /** |
| This function aborts the previous ARP request (identified by This, TargetSwAddress |
| and ResolvedEvent) that is issued by EFI_ARP_PROTOCOL.Request(). |
| |
| If the request is in the internal ARP request queue, the request is aborted |
| immediately and its ResolvedEvent is signaled. Only an asynchronous address |
| request needs to be canceled. If TargeSwAddress and ResolveEvent are both |
| NULL, all the pending asynchronous requests that have been issued by This |
| instance will be cancelled and their corresponding events will be signaled. |
| |
| @param This The pointer to the EFI_ARP_PROTOCOL instance. |
| @param TargetSwAddress The pointer to the protocol address in previous |
| request session. |
| @param ResolvedEvent Pointer to the event that is used as the |
| notification event in previous request session. |
| |
| @retval EFI_SUCCESS The pending request session(s) is/are aborted and |
| corresponding event(s) is/are signaled. |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: |
| This is NULL. TargetSwAddress is not NULL and |
| ResolvedEvent is NULL. TargetSwAddress is NULL and |
| ResolvedEvent is not NULL. |
| @retval EFI_NOT_STARTED The ARP driver instance has not been configured. |
| @retval EFI_NOT_FOUND The request is not issued by |
| EFI_ARP_PROTOCOL.Request(). |
| |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_ARP_CANCEL)( |
| IN EFI_ARP_PROTOCOL *This, |
| IN VOID *TargetSwAddress OPTIONAL, |
| IN EFI_EVENT ResolvedEvent OPTIONAL |
| ); |
| |
| /// |
| /// ARP is used to resolve local network protocol addresses into |
| /// network hardware addresses. |
| /// |
| struct _EFI_ARP_PROTOCOL { |
| EFI_ARP_CONFIGURE Configure; |
| EFI_ARP_ADD Add; |
| EFI_ARP_FIND Find; |
| EFI_ARP_DELETE Delete; |
| EFI_ARP_FLUSH Flush; |
| EFI_ARP_REQUEST Request; |
| EFI_ARP_CANCEL Cancel; |
| }; |
| |
| |
| extern EFI_GUID gEfiArpServiceBindingProtocolGuid; |
| extern EFI_GUID gEfiArpProtocolGuid; |
| |
| #endif |