| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H |
| #define SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H |
| |
| /* |
| * It does not matter where we put the SMBus I/O base, as long as we |
| * keep it consistent and don't interfere with other devices. Stage2 |
| * will relocate this anyways. |
| * Our solution is to have SMB initialization move the I/O to SMBUS_IO_BASE |
| * again. But handling static BARs is a generic problem that should be |
| * solved in the device allocator. |
| */ |
| #define SMBUS_IO_BASE 0x0400 |
| /* TODO Make sure these don't get changed by stage2 */ |
| #define DEFAULT_GPIOBASE 0x0480 |
| #define DEFAULT_PMBASE 0x0500 |
| |
| #include <southbridge/intel/common/rcba.h> |
| |
| #ifndef __ACPI__ |
| #define DEBUG_PERIODIC_SMIS 0 |
| |
| #include <device/device.h> |
| void i82801gx_enable(struct device *dev); |
| |
| void i82801gx_lpc_setup(void); |
| void i82801gx_setup_bars(void); |
| void i82801gx_early_init(void); |
| |
| #if ENV_ROMSTAGE |
| int smbus_read_byte(unsigned int device, unsigned int address); |
| int i2c_eeprom_read(unsigned int device, unsigned int cmd, unsigned int bytes, |
| u8 *buf); |
| int smbus_block_read(unsigned int device, unsigned int cmd, u8 bytes, u8 *buf); |
| int smbus_block_write(unsigned int device, unsigned int cmd, u8 bytes, |
| const u8 *buf); |
| void ich7_setup_cir(void); |
| #endif |
| |
| #define MAINBOARD_POWER_OFF 0 |
| #define MAINBOARD_POWER_ON 1 |
| #define MAINBOARD_POWER_KEEP 2 |
| |
| /* PCI Configuration Space (D30:F0): PCI2PCI */ |
| #define PSTS 0x06 |
| #define SMLT 0x1b |
| #define SECSTS 0x1e |
| #define INTR 0x3c |
| |
| #define ICH_PCIE_DEV_SLOT 28 |
| |
| /* PCI Configuration Space (D31:F0): LPC */ |
| |
| #define SERIRQ_CNTL 0x64 |
| |
| #define GEN_PMCON_1 0xa0 |
| #define GEN_PMCON_2 0xa2 |
| #define GEN_PMCON_3 0xa4 |
| |
| #define GPIO_ROUT 0xb8 |
| #define GPI_DISABLE 0x00 |
| #define GPI_IS_SMI 0x01 |
| #define GPI_IS_SCI 0x02 |
| #define GPI_IS_NMI 0x03 |
| |
| #define FDVCT 0xe4 |
| #define PCIE_4_PORTS_MAX (1 << 7) |
| #define AHCI_UNSUPPORTED (1 << 3) |
| |
| /* GEN_PMCON_3 bits */ |
| #define RTC_BATTERY_DEAD (1 << 2) |
| #define RTC_POWER_FAILED (1 << 1) |
| #define SLEEP_AFTER_POWER_FAIL (1 << 0) |
| |
| #define ACPI_CNTL 0x44 |
| #define ACPI_EN (1 << 7) |
| #define BIOS_CNTL 0xDC |
| #define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ |
| #define GPIO_CNTL 0x4C /* LPC GPIO Control Register */ |
| #define GPIO_EN (1 << 4) |
| |
| #define PIRQA_ROUT 0x60 |
| #define PIRQB_ROUT 0x61 |
| #define PIRQC_ROUT 0x62 |
| #define PIRQD_ROUT 0x63 |
| #define PIRQE_ROUT 0x68 |
| #define PIRQF_ROUT 0x69 |
| #define PIRQG_ROUT 0x6A |
| #define PIRQH_ROUT 0x6B |
| |
| #define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */ |
| #define LPC_EN 0x82 /* LPC IF Enables Register */ |
| #define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */ |
| #define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */ |
| #define MC_LPC_EN (1 << 11) /* 0x62/0x66 */ |
| #define KBC_LPC_EN (1 << 10) /* 0x60/0x64 */ |
| #define GAMEH_LPC_EN (1 << 9) /* 0x208/0x20f */ |
| #define GAMEL_LPC_EN (1 << 8) /* 0x200/0x207 */ |
| #define FDD_LPC_EN (1 << 3) /* LPC_IO_DEC[12] */ |
| #define LPT_LPC_EN (1 << 2) /* LPC_IO_DEC[9:8] */ |
| #define COMB_LPC_EN (1 << 1) /* LPC_IO_DEC[6:4] */ |
| #define COMA_LPC_EN (1 << 0) /* LPC_IO_DEC[2:0] */ |
| |
| #define GEN1_DEC 0x84 |
| #define GEN2_DEC 0x88 |
| #define GEN3_DEC 0x8c |
| #define GEN4_DEC 0x90 |
| |
| /* PCI Configuration Space (D31:F1): IDE */ |
| #define INTR_LN 0x3c |
| #define IDE_TIM_PRI 0x40 /* IDE timings, primary */ |
| #define IDE_DECODE_ENABLE (1 << 15) |
| #define IDE_SITRE (1 << 14) |
| #define IDE_ISP_5_CLOCKS (0 << 12) |
| #define IDE_ISP_4_CLOCKS (1 << 12) |
| #define IDE_ISP_3_CLOCKS (2 << 12) |
| #define IDE_RCT_4_CLOCKS (0 << 8) |
| #define IDE_RCT_3_CLOCKS (1 << 8) |
| #define IDE_RCT_2_CLOCKS (2 << 8) |
| #define IDE_RCT_1_CLOCKS (3 << 8) |
| #define IDE_DTE1 (1 << 7) |
| #define IDE_PPE1 (1 << 6) |
| #define IDE_IE1 (1 << 5) |
| #define IDE_TIME1 (1 << 4) |
| #define IDE_DTE0 (1 << 3) |
| #define IDE_PPE0 (1 << 2) |
| #define IDE_IE0 (1 << 1) |
| #define IDE_TIME0 (1 << 0) |
| #define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ |
| |
| #define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */ |
| #define IDE_SSDE1 (1 << 3) |
| #define IDE_SSDE0 (1 << 2) |
| #define IDE_PSDE1 (1 << 1) |
| #define IDE_PSDE0 (1 << 0) |
| |
| #define IDE_SDMA_TIM 0x4a |
| |
| #define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */ |
| #define SIG_MODE_SEC_NORMAL (0 << 18) |
| #define SIG_MODE_SEC_TRISTATE (1 << 18) |
| #define SIG_MODE_SEC_DRIVELOW (2 << 18) |
| #define SIG_MODE_PRI_NORMAL (0 << 16) |
| #define SIG_MODE_PRI_TRISTATE (1 << 16) |
| #define SIG_MODE_PRI_DRIVELOW (2 << 16) |
| #define FAST_SCB1 (1 << 15) |
| #define FAST_SCB0 (1 << 14) |
| #define FAST_PCB1 (1 << 13) |
| #define FAST_PCB0 (1 << 12) |
| #define SCB1 (1 << 3) |
| #define SCB0 (1 << 2) |
| #define PCB1 (1 << 1) |
| #define PCB0 (1 << 0) |
| |
| /* PCI Configuration Space (D31:F3): SMBus */ |
| #define SMB_BASE 0x20 |
| #define HOSTC 0x40 |
| |
| /* HOSTC bits */ |
| #define I2C_EN (1 << 2) |
| #define SMB_SMI_EN (1 << 1) |
| #define HST_EN (1 << 0) |
| |
| /* Southbridge IO BARs */ |
| |
| #define GPIOBASE 0x48 |
| |
| #define PMBASE 0x40 |
| |
| #define VCH 0x0000 /* 32bit */ |
| #define VCAP1 0x0004 /* 32bit */ |
| #define VCAP2 0x0008 /* 32bit */ |
| #define PVC 0x000c /* 16bit */ |
| #define PVS 0x000e /* 16bit */ |
| |
| #define V0CAP 0x0010 /* 32bit */ |
| #define V0CTL 0x0014 /* 32bit */ |
| #define V0STS 0x001a /* 16bit */ |
| |
| #define V1CAP 0x001c /* 32bit */ |
| #define V1CTL 0x0020 /* 32bit */ |
| #define V1STS 0x0026 /* 16bit */ |
| |
| #define RCTCL 0x0100 /* 32bit */ |
| #define ESD 0x0104 /* 32bit */ |
| #define ULD 0x0110 /* 32bit */ |
| #define ULBA 0x0118 /* 64bit */ |
| |
| #define RP1D 0x0120 /* 32bit */ |
| #define RP1BA 0x0128 /* 64bit */ |
| #define RP2D 0x0130 /* 32bit */ |
| #define RP2BA 0x0138 /* 64bit */ |
| #define RP3D 0x0140 /* 32bit */ |
| #define RP3BA 0x0148 /* 64bit */ |
| #define RP4D 0x0150 /* 32bit */ |
| #define RP4BA 0x0158 /* 64bit */ |
| #define HDD 0x0160 /* 32bit */ |
| #define HDBA 0x0168 /* 64bit */ |
| #define RP5D 0x0170 /* 32bit */ |
| #define RP5BA 0x0178 /* 64bit */ |
| #define RP6D 0x0180 /* 32bit */ |
| #define RP6BA 0x0188 /* 64bit */ |
| |
| #define ILCL 0x01a0 /* 32bit */ |
| #define LCAP 0x01a4 /* 32bit */ |
| #define LCTL 0x01a8 /* 16bit */ |
| #define LSTS 0x01aa /* 16bit */ |
| |
| #define RPC 0x0224 /* 32bit */ |
| #define RPFN 0x0238 /* 32bit */ |
| |
| /* Get the function number assigned to a Root Port */ |
| #define RPFN_FNGET(reg, port) (((reg) >> ((port) * 4)) & 7) |
| /* Set the function number for a Root Port */ |
| #define RPFN_FNSET(port, func) (((func) & 7) << ((port) * 4)) |
| /* Root Port function number mask */ |
| #define RPFN_FNMASK(port) (7 << ((port) * 4)) |
| |
| #define TRSR 0x1e00 /* 8bit */ |
| #define TRCR 0x1e10 /* 64bit */ |
| #define TWDR 0x1e18 /* 64bit */ |
| |
| #define IOTR0 0x1e80 /* 64bit */ |
| #define IOTR1 0x1e88 /* 64bit */ |
| #define IOTR2 0x1e90 /* 64bit */ |
| #define IOTR3 0x1e98 /* 64bit */ |
| |
| #define TCTL 0x3000 /* 8bit */ |
| |
| #define D31IP 0x3100 /* 32bit */ |
| #define D30IP 0x3104 /* 32bit */ |
| #define D29IP 0x3108 /* 32bit */ |
| #define D28IP 0x310c /* 32bit */ |
| #define D27IP 0x3110 /* 32bit */ |
| #define D31IR 0x3140 /* 16bit */ |
| #define D30IR 0x3142 /* 16bit */ |
| #define D29IR 0x3144 /* 16bit */ |
| #define D28IR 0x3146 /* 16bit */ |
| #define D27IR 0x3148 /* 16bit */ |
| #define OIC 0x31ff /* 8bit */ |
| |
| #define RC 0x3400 /* 32bit */ |
| #define HPTC 0x3404 /* 32bit */ |
| #define GCS 0x3410 /* 32bit */ |
| #define BUC 0x3414 /* 32bit */ |
| #define FD 0x3418 /* 32bit */ |
| #define CG 0x341c /* 32bit */ |
| |
| /* Function Disable (FD) register values. |
| * Setting a bit disables the corresponding |
| * feature. |
| * Not all features might be disabled on |
| * all chipsets. Esp. ICH-7U is picky. |
| */ |
| #define ICH_DISABLE_PCIE(x) (1 << (16 + (x))) |
| #define FD_EHCI (1 << 15) |
| #define FD_LPCB (1 << 14) |
| |
| /* UHCI must be disabled from 4 downwards. |
| * If UHCI controllers get disabled, EHCI |
| * must know about it, too! */ |
| #define ICH_DISABLE_UHCI(x) (1 << (8 + (x))) |
| |
| #define FD_INTLAN (1 << 7) |
| #define FD_ACMOD (1 << 6) |
| #define FD_ACAUD (1 << 5) |
| #define FD_HDAUD (1 << 4) |
| #define FD_SMBUS (1 << 3) |
| #define FD_SATA (1 << 2) |
| #define FD_PATA (1 << 1) |
| |
| /* ICH7 PMBASE */ |
| #define PM1_STS 0x00 |
| #define WAK_STS (1 << 15) |
| #define PCIEXPWAK_STS (1 << 14) |
| #define PRBTNOR_STS (1 << 11) |
| #define RTC_STS (1 << 10) |
| #define PWRBTN_STS (1 << 8) |
| #define GBL_STS (1 << 5) |
| #define BM_STS (1 << 4) |
| #define TMROF_STS (1 << 0) |
| #define PM1_EN 0x02 |
| #define PCIEXPWAK_DIS (1 << 14) |
| #define RTC_EN (1 << 10) |
| #define PWRBTN_EN (1 << 8) |
| #define GBL_EN (1 << 5) |
| #define TMROF_EN (1 << 0) |
| #define PM1_CNT 0x04 |
| #define GBL_RLS (1 << 2) |
| #define BM_RLD (1 << 1) |
| #define SCI_EN (1 << 0) |
| #define PM1_TMR 0x08 |
| #define PROC_CNT 0x10 |
| #define LV2 0x14 |
| #define LV3 0x15 |
| #define LV4 0x16 |
| #define PM2_CNT 0x20 // mobile only |
| #define GPE0_STS 0x28 |
| #define USB4_STS (1 << 14) |
| #define PME_B0_STS (1 << 13) |
| #define USB3_STS (1 << 12) |
| #define PME_STS (1 << 11) |
| #define BATLOW_STS (1 << 10) |
| #define PCI_EXP_STS (1 << 9) |
| #define RI_STS (1 << 8) |
| #define SMB_WAK_STS (1 << 7) |
| #define TCOSCI_STS (1 << 6) |
| #define AC97_STS (1 << 5) |
| #define USB2_STS (1 << 4) |
| #define USB1_STS (1 << 3) |
| #define SWGPE_STS (1 << 2) |
| #define HOT_PLUG_STS (1 << 1) |
| #define THRM_STS (1 << 0) |
| #define GPE0_EN 0x2c |
| #define PME_B0_EN (1 << 13) |
| #define PME_EN (1 << 11) |
| #define SMI_EN 0x30 |
| #define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology |
| #define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic |
| #define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic |
| #define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS |
| #define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) |
| #define MCSMI_EN (1 << 11) // Trap microcontroller range access |
| #define BIOS_RLS (1 << 7) // asserts SCI on bit set |
| #define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set |
| #define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# |
| #define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# |
| #define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic |
| #define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit |
| #define EOS (1 << 1) // End of SMI (deassert SMI#) |
| #define GBL_SMI_EN (1 << 0) // SMI# generation at all? |
| #define SMI_STS 0x34 |
| #define ALT_GP_SMI_EN 0x38 |
| #define ALT_GP_SMI_STS 0x3a |
| #define GPE_CNTL 0x42 |
| #define DEVACT_STS 0x44 |
| #define SS_CNT 0x50 |
| #define C3_RES 0x54 |
| #define TCO1_CNT 0x68 |
| |
| #endif /* __ACPI__ */ |
| #endif /* SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H */ |