| # SPDX-License-Identifier: GPL-2.0-only |
| |
| config SOC_AMD_STONEYRIDGE |
| bool |
| select ACPI_SOC_NVS |
| select ARCH_X86 |
| select BOOT_DEVICE_SUPPORTS_WRITES if BOOT_DEVICE_SPI_FLASH |
| select COLLECT_TIMESTAMPS_NO_TSC |
| select GENERIC_GPIO_LIB |
| select GENERIC_UDELAY |
| select HAVE_CF9_RESET |
| select HAVE_SMI_HANDLER |
| select HAVE_USBDEBUG_OPTIONS |
| select PARALLEL_MP_AP_WORK |
| select RTC |
| select SOC_AMD_PI |
| select SOC_AMD_COMMON |
| select SOC_AMD_COMMON_BLOCK_ACPI |
| select SOC_AMD_COMMON_BLOCK_ACPI_GPIO |
| select SOC_AMD_COMMON_BLOCK_ACPI_CPU_POWER_STATE |
| select SOC_AMD_COMMON_BLOCK_ACPIMMIO |
| select SOC_AMD_COMMON_BLOCK_ACPIMMIO_BIOSRAM |
| select SOC_AMD_COMMON_BLOCK_ACPIMMIO_PM_IO_ACCESS |
| select SOC_AMD_COMMON_BLOCK_AOAC |
| select SOC_AMD_COMMON_BLOCK_BANKED_GPIOS |
| select SOC_AMD_COMMON_BLOCK_CAR |
| select SOC_AMD_COMMON_BLOCK_CPUFREQ_FAM15H_16H |
| select SOC_AMD_COMMON_BLOCK_GRAPHICS |
| select SOC_AMD_COMMON_BLOCK_HDA |
| select SOC_AMD_COMMON_BLOCK_I2C |
| select SOC_AMD_COMMON_BLOCK_IOMMU |
| select SOC_AMD_COMMON_BLOCK_LPC |
| select SOC_AMD_COMMON_BLOCK_MCA |
| select SOC_AMD_COMMON_BLOCK_PCI |
| select SOC_AMD_COMMON_BLOCK_PM |
| select SOC_AMD_COMMON_BLOCK_PSP_GEN1 |
| select SOC_AMD_COMMON_BLOCK_SATA |
| select SOC_AMD_COMMON_BLOCK_SMBUS |
| select SOC_AMD_COMMON_BLOCK_SMI |
| select SOC_AMD_COMMON_BLOCK_SMM |
| select SOC_AMD_COMMON_BLOCK_SMN |
| select SOC_AMD_COMMON_BLOCK_SPI |
| select SOC_AMD_COMMON_BLOCK_SVI2 |
| select SOC_AMD_COMMON_BLOCK_UART |
| select SOC_AMD_COMMON_LATE_SMM_LOCKING |
| select SSE2 |
| select TSC_SYNC_LFENCE |
| select USE_DDR4 |
| select X86_AMD_FIXED_MTRRS |
| help |
| AMD support for SOCs in Family 15h Models 60h-6Fh and Models 70h-7Fh. |
| |
| if SOC_AMD_STONEYRIDGE |
| |
| config AMD_APU_STONEYRIDGE |
| bool |
| help |
| AMD Stoney Ridge APU |
| |
| config AMD_APU_PRAIRIEFALCON |
| bool |
| help |
| AMD Embedded Prairie Falcon APU |
| |
| config AMD_APU_MERLINFALCON |
| bool |
| help |
| AMD Embedded Merlin Falcon APU |
| |
| config AMD_APU_PKG_FP4 |
| bool |
| help |
| AMD FP4 package |
| |
| config AMD_APU_PKG_FT4 |
| bool |
| help |
| AMD FT4 package |
| |
| config AMD_SOC_PACKAGE |
| string |
| default "FP4" if AMD_APU_PKG_FP4 |
| default "FT4" if AMD_APU_PKG_FT4 |
| |
| config CHIPSET_DEVICETREE |
| string |
| default "soc/amd/stoneyridge/chipset_cz.cb" if AMD_APU_MERLINFALCON |
| default "soc/amd/stoneyridge/chipset_st.cb" if AMD_APU_PRAIRIEFALCON |
| default "soc/amd/stoneyridge/chipset_st.cb" if AMD_APU_STONEYRIDGE |
| |
| config VBOOT |
| select VBOOT_STARTS_IN_BOOTBLOCK |
| select VBOOT_VBNV_CMOS |
| select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH |
| |
| # TODO: Sync these with definitions in PI vendorcode. |
| # DCACHE_RAM_BASE must equal BSP_STACK_BASE_ADDR. |
| # DCACHE_RAM_SIZE must equal BSP_STACK_SIZE. |
| |
| config DCACHE_RAM_BASE |
| hex |
| default 0x30000 |
| |
| config DCACHE_RAM_SIZE |
| hex |
| default 0x10000 |
| |
| config PRERAM_CBFS_CACHE_SIZE |
| default 0x0 |
| |
| config DCACHE_BSP_STACK_SIZE |
| hex |
| default 0x4000 |
| help |
| The amount of anticipated stack usage in CAR by bootblock and |
| other stages. |
| |
| config PRERAM_CBMEM_CONSOLE_SIZE |
| hex |
| default 0x1600 |
| help |
| Increase this value if preram cbmem console is getting truncated |
| |
| config BOTTOMIO_POSITION |
| hex "Bottom of 32-bit IO space" |
| default 0xD0000000 |
| help |
| If PCI peripherals with big BARs are connected to the system |
| the bottom of the IO must be decreased to allocate such |
| devices. |
| |
| Declare the beginning of the 128MB-aligned MMIO region. This |
| option is useful when PCI peripherals requesting large address |
| ranges are present. |
| |
| config ECAM_MMCONF_BASE_ADDRESS |
| default 0xF8000000 |
| |
| config ECAM_MMCONF_BUS_NUMBER |
| default 64 |
| |
| config VGA_BIOS_ID |
| string |
| default "1002,9870" if AMD_APU_MERLINFALCON |
| default "1002,98e0" |
| help |
| The default VGA BIOS PCI vendor/device ID should be set to the |
| result of the map_oprom_vendev() function in northbridge.c. |
| |
| config VGA_BIOS_FILE |
| string |
| default "3rdparty/amd_blobs/stoneyridge/CarrizoGenericVbios.bin" if AMD_APU_MERLINFALCON |
| default "3rdparty/amd_blobs/stoneyridge/StoneyGenericVbios.bin" if AMD_APU_PRAIRIEFALCON |
| default "3rdparty/amd_blobs/stoneyridge/StoneyGenericVbios.bin" if AMD_APU_STONEYRIDGE |
| |
| config S3_VGA_ROM_RUN |
| bool |
| default n |
| |
| config EHCI_BAR |
| hex |
| default 0xfef00000 |
| |
| config STONEYRIDGE_XHCI_ENABLE |
| bool "Enable Stoney Ridge XHCI Controller" |
| default y |
| help |
| The XHCI controller must be enabled and the XHCI firmware |
| must be added in order to have USB 3.0 support configured |
| by coreboot. The OS will be responsible for enabling the XHCI |
| controller if the XHCI firmware is available but the |
| XHCI controller is not enabled by coreboot. |
| |
| config STONEYRIDGE_XHCI_FWM |
| bool "Add xhci firmware" |
| default y |
| help |
| Add Stoney Ridge XHCI Firmware to support the onboard USB 3.0 |
| |
| config STONEYRIDGE_GEC_FWM |
| bool |
| default n |
| help |
| Add Stoney Ridge GEC Firmware to support the onboard gigabit Ethernet MAC. |
| Must be connected to a Broadcom B50610 or B50610M PHY on the motherboard. |
| |
| config STONEYRIDGE_XHCI_FWM_FILE |
| string "XHCI firmware path and filename" |
| default "3rdparty/amd_blobs/stoneyridge/xhci.bin" |
| depends on STONEYRIDGE_XHCI_FWM |
| |
| config STONEYRIDGE_GEC_FWM_FILE |
| string "GEC firmware path and filename" |
| depends on STONEYRIDGE_GEC_FWM |
| |
| config AMDFW_CONFIG_FILE |
| string |
| string "AMD PSP Firmware config file" |
| default "src/soc/amd/stoneyridge/fw_cz.cfg" if AMD_APU_MERLINFALCON |
| default "src/soc/amd/stoneyridge/fw_st.cfg" if AMD_APU_PRAIRIEFALCON |
| default "src/soc/amd/stoneyridge/fw_st.cfg" if AMD_APU_STONEYRIDGE |
| |
| config STONEYRIDGE_SATA_MODE |
| int "SATA Mode" |
| default 0 |
| range 0 6 |
| help |
| Select the mode in which SATA should be driven. |
| The default is NATIVE. |
| 0: NATIVE mode does not require a ROM. |
| 2: AHCI may work with or without AHCI ROM. It depends on the payload support. |
| For example, seabios does not require the AHCI ROM. |
| 3: LEGACY IDE |
| 4: IDE to AHCI |
| 5: AHCI7804: ROM Required, and AMD driver required in the OS. |
| 6: IDE to AHCI7804: ROM Required, and AMD driver required in the OS. |
| |
| comment "NATIVE" |
| depends on STONEYRIDGE_SATA_MODE = 0 |
| |
| comment "AHCI" |
| depends on STONEYRIDGE_SATA_MODE = 2 |
| |
| comment "LEGACY IDE" |
| depends on STONEYRIDGE_SATA_MODE = 3 |
| |
| comment "IDE to AHCI" |
| depends on STONEYRIDGE_SATA_MODE = 4 |
| |
| comment "AHCI7804" |
| depends on STONEYRIDGE_SATA_MODE = 5 |
| |
| comment "IDE to AHCI7804" |
| depends on STONEYRIDGE_SATA_MODE = 6 |
| |
| config STONEYRIDGE_LEGACY_FREE |
| bool "System is legacy free" |
| help |
| Select y if there is no keyboard controller in the system. |
| This sets variables in AGESA and ACPI. |
| |
| config SERIRQ_CONTINUOUS_MODE |
| bool |
| default n |
| help |
| Set this option to y for serial IRQ in continuous mode. |
| Otherwise it is in quiet mode. |
| |
| config CONSOLE_UART_BASE_ADDRESS |
| depends on CONSOLE_SERIAL |
| hex |
| default 0xfedc6000 |
| |
| config SMM_TSEG_SIZE |
| hex |
| default 0x800000 if HAVE_SMI_HANDLER |
| default 0x0 |
| |
| config SMM_RESERVED_SIZE |
| hex |
| default 0x160000 |
| |
| config SMM_MODULE_STACK_SIZE |
| hex |
| default 0x800 |
| |
| config ACPI_CPU_STRING |
| string |
| default "P%03X" |
| |
| config ACPI_SSDT_PSD_INDEPENDENT |
| default n |
| |
| config ACPI_BERT |
| bool "Build ACPI BERT Table" |
| default y |
| depends on HAVE_ACPI_TABLES |
| help |
| Report Machine Check errors identified in POST to the OS in an |
| ACPI Boot Error Record Table. This option reserves an 8MB region |
| for building the error structures. |
| |
| config USE_PSPSECUREOS |
| bool "Include PSP SecureOS blobs in AMD firmware" |
| default y |
| help |
| Include the PspSecureOs, PspTrustlet and TrustletKey binaries |
| in the amdfw section. |
| |
| If unsure, answer 'y' |
| |
| config SOC_AMD_PSP_SELECTABLE_SMU_FW |
| bool |
| default y if AMD_APU_STONEYRIDGE |
| help |
| Some ST implementations allow storing SMU firmware into cbfs and |
| calling the PSP to load the blobs at the proper time. |
| |
| Merlin Falcon does not support it. If you are using 00670F00 SOC, |
| ask your AMD representative if it supports it or not. |
| |
| config SOC_AMD_SMU_FANLESS |
| bool |
| depends on SOC_AMD_PSP_SELECTABLE_SMU_FW |
| default n if SOC_AMD_SMU_NOTFANLESS |
| default y |
| |
| config SOC_AMD_SMU_FANNED |
| bool |
| depends on SOC_AMD_PSP_SELECTABLE_SMU_FW |
| default n |
| select SOC_AMD_SMU_NOTFANLESS |
| |
| config SOC_AMD_SMU_NOTFANLESS # helper symbol - do not use |
| bool |
| depends on SOC_AMD_PSP_SELECTABLE_SMU_FW |
| |
| config AMDFW_OUTSIDE_CBFS |
| bool "The AMD firmware is outside CBFS" |
| default n |
| help |
| The AMDFW (PSP) is typically locatable in cbfs. Select this |
| option to manually attach the generated amdfw.rom outside of |
| cbfs. The location is selected by the FWM position. |
| |
| config DIMM_SPD_SIZE |
| default 512 # DDR4 |
| |
| config RO_REGION_ONLY |
| string |
| depends on VBOOT_SLOTS_RW_AB || VBOOT_SLOTS_RW_A |
| default "apu/amdfw" |
| |
| config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ |
| int |
| default 133 |
| |
| config DISABLE_KEYBOARD_RESET_PIN |
| bool |
| help |
| Instruct the SoC to not use the state of GPIO_129 as keyboard reset |
| signal. When this pin is used as GPIO and the keyboard reset |
| functionality isn't disabled, configuring it as an output and driving |
| it as 0 will cause a reset. |
| |
| config ACPI_BERT_SIZE |
| hex |
| default 0x100000 if ACPI_BERT |
| default 0x0 |
| help |
| Specify the amount of DRAM reserved for gathering the data used to |
| generate the ACPI table. |
| |
| endif # SOC_AMD_STONEYRIDGE |