| chip soc/intel/elkhartlake |
| |
| #register "enable_vtd" = "1" |
| |
| register "power_limits_config" = "{ |
| .tdp_pl1_override = 10, |
| .tdp_pl2_override = 15, |
| }" |
| |
| register "SaGv" = "SaGv_Enabled" |
| register "eist_enable" = "1" |
| |
| # Enable lpss s0ix |
| register "s0ix_enable" = "1" |
| |
| # GPE configuration |
| # Note that GPE events called out in ASL code rely on this |
| # route, i.e., if this route changes then the affected GPE |
| # offset bits also need to be changed. This sets the PMC register |
| # GPE_CFG fields. |
| #register "pmc_gpe0_dw1" = "PMC_GPE_SCC_63_32" |
| #register "pmc_gpe0_dw2" = "PMC_GPE_N_31_0" |
| #register "pmc_gpe0_dw3" = "PMC_GPE_SCC_31_0" |
| |
| register "tcc_offset" = "5" # TCC of 95C |
| |
| # USB 2.0 ports |
| register "usb2_ports[0]" = "USB2_PORT_SHORT(OC_SKIP)" # Header FUSB1 |
| register "usb2_ports[1]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # Header FUSB1 |
| register "usb2_ports[3]" = "USB2_PORT_SHORT(OC_SKIP)" # M.2 WLAN |
| register "usb2_ports[4]" = "USB2_PORT_SHORT(OC_SKIP)" # M.2 WWAN |
| register "usb2_ports[5]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[6]" = "USB2_PORT_SHORT(OC_SKIP)" # USB Type-A Upper |
| register "usb2_ports[7]" = "USB2_PORT_SHORT(OC_SKIP)" # USB Type-C |
| register "usb2_ports[8]" = "USB2_PORT_SHORT(OC_SKIP)" # USB Type-A Lower |
| register "usb2_ports[9]" = "USB2_PORT_EMPTY" |
| |
| # USB 3.x ports |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB Type-A Upper |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB Type-A Lower |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB Type-C Muxed |
| register "usb3_ports[3]" = "USB3_PORT_EMPTY" |
| |
| # PCIe root ports related UPDs |
| register "PcieClkSrcUsage[0]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcUsage[1]" = "PCIE_CLK_FREE" |
| register "PcieClkSrcUsage[2]" = "PCIE_CLK_FREE" |
| register "PcieClkSrcUsage[3]" = "PCIE_CLK_FREE" |
| register "PcieClkSrcUsage[4]" = "PCIE_CLK_FREE" |
| register "PcieClkSrcUsage[5]" = "PCIE_CLK_FREE" |
| |
| register "PcieClkSrcClkReq[0]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[1]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[2]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[3]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[4]" = "PCIE_CLK_NOTUSED" |
| register "PcieClkSrcClkReq[5]" = "PCIE_CLK_NOTUSED" |
| |
| # Storage (SATA/SDCARD/EMMC) related UPDs |
| register "SataSalpSupport" = "1" |
| register "SataPortsEnable[0]" = "1" # Header |
| register "SataPortsEnable[1]" = "1" # M.2 2280 |
| register "SataPortsDevSlp[0]" = "0" |
| register "SataPortsDevSlp[1]" = "1" |
| |
| register "PchHdaAudioLinkHdaEnable" = "1" |
| register "PchHdaSdiEnable[0]" = "1" |
| register "ScsEmmcHs400Enabled" = "1" |
| register "SkipCpuReplacementCheck" = "1" |
| |
| # Enable DDI ports A/B/C |
| register "DdiPortAConfig" = "1" |
| register "DdiPortBConfig" = "1" |
| register "DdiPortCConfig" = "1" |
| |
| # Enable HPD for DDI ports A/B |
| register "DdiPortAHpd" = "1" |
| register "DdiPortBHpd" = "1" |
| |
| # Enable DDC for DDI ports A/B |
| register "DdiPortADdc" = "1" |
| register "DdiPortBDdc" = "1" |
| |
| device cpu_cluster 0 on end |
| device domain 0 on |
| device pci 00.0 on end # Host Bridge |
| device pci 02.0 on end # Integrated Graphics Device |
| device pci 04.0 off end # SA Thermal device |
| device pci 08.0 off end # GNA |
| device pci 09.0 off end # CPU Intel Trace Hub |
| |
| device pci 10.0 on end # I2C6 |
| device pci 10.1 on end # I2C7 |
| device pci 10.5 on end # Integrated Error Handler |
| |
| device pci 11.0 off end # Intel PSE UART0 |
| device pci 11.1 off end # Intel PSE UART1 |
| device pci 11.2 off end # Intel PSE UART2 |
| device pci 11.3 off end # Intel PSE UART3 |
| device pci 11.4 off end # Intel PSE UART4 |
| device pci 11.5 off end # Intel PSE UART5 |
| device pci 11.6 off end # Intel PSE IS20 |
| device pci 11.7 off end # Intel PSE IS21 |
| |
| device pci 12.0 on end # GSPI2 |
| device pci 12.3 on end # Management Engine UMA Access |
| device pci 12.4 on end # Management Engine PTT DMA Controller |
| device pci 12.5 off end # UFS0 |
| device pci 12.7 off end # UFS1 |
| |
| device pci 13.0 off end # Intel PSE GSPI0 |
| device pci 13.1 off end # Intel PSE GSPI1 |
| device pci 13.2 off end # Intel PSE GSPI2 |
| device pci 13.3 off end # Intel PSE GSPI3 |
| device pci 13.4 off end # Intel PSE GPIO0 |
| device pci 13.5 off end # Intel PSE GPIO1 |
| |
| device pci 14.0 on end # USB3.1 xHCI |
| device pci 14.1 off end # USB3.1 xDCI (OTG) |
| device pci 14.2 on end # Shared RAM |
| |
| device pci 15.0 off end # I2C0 |
| device pci 15.1 off end # I2C1 |
| device pci 15.2 off end # I2C2 |
| device pci 15.3 off end # I2C3 |
| |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.4 off end # Management Engine Interface 3 |
| device pci 16.5 off end # Management Engine Interface 4 |
| |
| device pci 17.0 on end # SATA |
| |
| device pci 18.0 off end # Intel PSE I2C7 |
| device pci 18.1 off end # Intel PSE CAN0 |
| device pci 18.2 off end # Intel PSE CAN1 |
| device pci 18.3 off end # Intel PSE QEP0 |
| device pci 18.4 off end # Intel PSE QEP1 |
| device pci 18.5 off end # Intel PSE QEP2 |
| device pci 18.6 off end # Intel PSE QEP3 |
| |
| device pci 19.0 on end # I2C4 |
| device pci 19.1 off end # I2C5 |
| device pci 19.2 on end # UART2 |
| |
| device pci 1a.0 on end # eMMC |
| device pci 1a.1 off end # SD |
| device pci 1a.3 off end # Intel Safety Island |
| |
| device pci 1b.0 off end # Intel PSE I2C0 |
| device pci 1b.1 off end # Intel PSE I2C1 |
| device pci 1b.2 off end # Intel PSE I2C2 |
| device pci 1b.3 off end # Intel PSE I2C3 |
| device pci 1b.4 off end # Intel PSE I2C4 |
| device pci 1b.5 off end # Intel PSE I2C5 |
| device pci 1b.6 off end # Intel PSE I2C6 |
| |
| device pci 1c.0 on end # RP0 (pcie0 single VC) |
| device pci 1c.1 on end # RP1 (pcie0 single VC) |
| device pci 1c.2 on end # RP2 (pcie0 single VC) |
| device pci 1c.3 off end # RP3 (pcie0 single VC) |
| device pci 1c.4 on end # RP4 (pcie1 multi VC) |
| device pci 1c.5 off end # RP5 (pcie2 multi VC) |
| device pci 1c.6 on end # RP6 (pcie3 multi VC) |
| |
| device pci 1d.0 off end # Intel PSE IPC (local host to PSE) |
| device pci 1d.1 off end # Intel PSE Time-Sensitive Networking GbE 0 |
| device pci 1d.2 off end # Intel PSE Time-Sensitive Networking GbE 1 |
| device pci 1d.3 off end # Intel PSE DMA0 |
| device pci 1d.4 off end # Intel PSE DMA1 |
| device pci 1d.5 off end # Intel PSE DMA2 |
| device pci 1d.6 off end # Intel PSE PWM |
| device pci 1d.7 off end # Intel PSE ADC |
| |
| device pci 1e.0 off end # UART0 |
| device pci 1e.1 off end # UART1 |
| device pci 1e.2 off end # GSPI0 |
| device pci 1e.3 off end # GSPI1 |
| device pci 1e.4 off end # PCH Time-Sensitive Networking GbE |
| device pci 1e.6 off end # HPET |
| device pci 1e.7 off end # IOAPIC |
| |
| device pci 1f.0 on # eSPI interface |
| chip superio/ite/it8613e |
| device pnp 2e.0 off end |
| device pnp 2e.1 on # COM 1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.4 off end # Environment Controller |
| device pnp 2e.5 off end # Keyboard |
| device pnp 2e.6 off end # Mouse |
| device pnp 2e.7 off end # GPIO |
| device pnp 2e.a off end # CIR |
| end |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| end |
| device pci 1f.1 on end # P2SB |
| device pci 1f.2 hidden end # Power Management Controller |
| device pci 1f.3 on end # Intel cAVS/HDA |
| device pci 1f.4 on end # SMBUS |
| device pci 1f.5 on end # PCH SPI (flash & TPM) |
| device pci 1f.7 off end # PCH Intel Trace Hub |
| end |
| end |