| # |
| # This file is part of the coreboot project. |
| # |
| # Copyright (C) 2017 Nicola Corna <nicola@corna.info> |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| |
| chip northbridge/intel/sandybridge |
| register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" |
| register "gfx.link_frequency_270_mhz" = "0" |
| register "gfx.ndid" = "3" |
| register "gfx.use_spread_spectrum_clock" = "0" |
| register "gpu_cpu_backlight" = "0x00000000" |
| register "gpu_dp_b_hotplug" = "0" |
| register "gpu_dp_c_hotplug" = "0" |
| register "gpu_dp_d_hotplug" = "0" |
| register "gpu_panel_port_select" = "0" |
| register "gpu_panel_power_backlight_off_delay" = "0" |
| register "gpu_panel_power_backlight_on_delay" = "0" |
| register "gpu_panel_power_cycle_delay" = "0" |
| register "gpu_panel_power_down_delay" = "0" |
| register "gpu_panel_power_up_delay" = "0" |
| register "gpu_pch_backlight" = "0x00000000" |
| device cpu_cluster 0x0 on |
| chip cpu/intel/socket_LGA1155 |
| device lapic 0x0 on |
| end |
| end |
| chip cpu/intel/model_206ax |
| register "c1_acpower" = "1" |
| register "c1_battery" = "1" |
| register "c2_acpower" = "3" |
| register "c2_battery" = "3" |
| register "c3_acpower" = "5" |
| register "c3_battery" = "5" |
| device lapic 0xacac off |
| end |
| end |
| end |
| device domain 0x0 on |
| chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH |
| register "c2_latency" = "0x0065" |
| register "docking_supported" = "0" |
| register "gen1_dec" = "0x000c0291" |
| register "gen2_dec" = "0x000c0a01" |
| register "gen3_dec" = "0x00000000" |
| register "gen4_dec" = "0x00000000" |
| register "p_cnt_throttling_supported" = "0" |
| register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" |
| register "pcie_port_coalesce" = "1" |
| register "sata_interface_speed_support" = "0x3" |
| register "sata_port_map" = "0x33" |
| device pci 16.0 on # Management Engine Interface 1 |
| subsystemid 0x174b 0x1007 |
| end |
| device pci 16.1 off # Management Engine Interface 2 |
| end |
| device pci 16.2 off # Management Engine IDE-R |
| end |
| device pci 16.3 off # Management Engine KT |
| end |
| device pci 19.0 off # Intel Gigabit Ethernet |
| end |
| device pci 1a.0 on # USB2 EHCI #2 |
| subsystemid 0x174b 0x1007 |
| end |
| device pci 1b.0 on # High Definition Audio Audio controller |
| subsystemid 0x8086 0x1c20 |
| end |
| device pci 1c.0 on # PCIe Port #1 |
| subsystemid 0x174b 0x1007 |
| end |
| device pci 1c.1 off # PCIe Port #2 |
| end |
| device pci 1c.2 off # PCIe Port #3 |
| end |
| device pci 1c.3 off # PCIe Port #4 |
| end |
| device pci 1c.4 on # PCIe Port #5 |
| subsystemid 0x174b 0x1007 |
| end |
| device pci 1c.5 on # PCIe Port #6 |
| subsystemid 0x174b 0x1007 |
| end |
| device pci 1c.6 off # PCIe Port #7 |
| end |
| device pci 1c.7 off # PCIe Port #8 |
| end |
| device pci 1d.0 on # USB2 EHCI #1 |
| subsystemid 0x174b 0x1007 |
| end |
| device pci 1e.0 off # PCI bridge |
| end |
| device pci 1f.0 on # LPC bridge PCI-LPC bridge |
| subsystemid 0x174b 0x1007 |
| chip superio/fintek/f71808a |
| register "multi_function_register_0" = "0x00" |
| register "multi_function_register_1" = "0xc4" |
| register "multi_function_register_2" = "0x21" |
| register "multi_function_register_3" = "0x2f" |
| register "multi_function_register_4" = "0x5c" |
| register "hwm_peci_tsi_ctrl" = "0x02" # PECI enabled, 1.23 V |
| register "hwm_tcc_temp" = "0x66" # TCC temperature = 102 °C |
| register "hwm_fan1_seg1_speed" = "0xff" # Fan 1 segment 1 = 100% |
| register "hwm_fan1_seg2_speed" = "0xdb" # Fan 1 segment 2 = 86% |
| register "hwm_fan1_seg3_speed" = "0xbc" # Fan 1 segment 3 = 74% |
| register "hwm_fan1_seg4_speed" = "0x9e" # Fan 1 segment 4 = 62% |
| register "hwm_fan1_seg5_speed" = "0x7f" # Fan 1 segment 5 = 50% |
| register "hwm_fan1_temp_src" = "0x18" # Fan 1 source = PECI |
| register "hwm_fan2_seg1_speed" = "0xff" # Fan 2 segment 1 = 100% |
| register "hwm_fan2_seg2_speed" = "0xdb" # Fan 2 segment 2 = 86% |
| register "hwm_fan2_seg3_speed" = "0xbc" # Fan 2 segment 3 = 74% |
| register "hwm_fan2_seg4_speed" = "0x9e" # Fan 2 segment 4 = 62% |
| register "hwm_fan2_seg5_speed" = "0x7f" # Fan 2 segment 5 = 50% |
| register "hwm_fan2_temp_src" = "0x1e" # Fan 2 source = temperature 2 |
| device pnp 4e.1 off end # Serial Port 1 |
| device pnp 4e.4 on # Hardware monitor |
| io 0x60 = 0x295 |
| irq 0x70 = 0 |
| end |
| device pnp 4e.5 off end # Keyboard |
| device pnp 4e.6 on # GPIO |
| irq 0xc5 = 0x1f |
| end |
| device pnp 4e.7 on # WDT |
| io 0x60 = 0xa00 |
| end |
| device pnp 4e.8 off end # CIR |
| device pnp 4e.a off # PME, ACPI, EUP |
| irq 0xf8 = 0x00 |
| irq 0xf9 = 0x09 |
| irq 0xfa = 0x00 |
| end |
| end |
| end |
| device pci 1f.2 on # SATA Controller 1 |
| subsystemid 0x174b 0x1007 |
| end |
| device pci 1f.3 on # SMBus |
| subsystemid 0x174b 0x1007 |
| end |
| device pci 1f.5 off # SATA Controller 2 |
| end |
| device pci 1f.6 off # Thermal |
| end |
| end |
| device pci 00.0 on # Host bridge Host bridge |
| subsystemid 0x174b 0x1007 |
| end |
| device pci 01.0 on # PCIe Bridge for discrete graphics |
| subsystemid 0x174b 0x1007 |
| end |
| device pci 02.0 on # Internal graphics VGA controller |
| subsystemid 0x8086 0x2010 |
| end |
| end |
| end |